How to link a exe file in labview

hlo
I am using labview 7, is it possible to link a .exe file to labview,
i am using a stepper motor controller i have their software to control & set & change settings etc.. & that is a exe file which is a dos based programme, is it possible to link that exe to labview, & i should open & run that programe (motor controller) from labview.
thanks
sasi

Try to launch it with "system exec.vi." This function can execute command line commands and should be able to launch any executable.
aartjan

Similar Messages

How to create an exe file using labview and arduino?

I bought Arduino Mega 2560. I have installed Arduino IDE 1.7.3. I am using Windows 7 64bit version and Labview 2012. I started working after the compilation of LIFA_Base File with Arduino IDE and with labview.
My application is: I have connected my arduino to my PC via USB for read input/output pins. I have to read all the time an analogue input from arduino and I have to draw the graphical representation of the input. I would like to know if I can create an exe file of this application. I would like to use the created exe file to another PC without labview installation.
Please help me to resolve the problem.
Regards

Yup you sure can. With Application Builder, that is bundled with several LabVIEW packages you can make an EXE, and then make an installer that can include the LabVIEW Run-Time engine (free) and you'll also need the VISA run-time for talking to serial devices like your Arduino.
Then you should be able to run that installer on any normal Windows PC and without the development environment be able to run your program.
Note that currently Student, and Home versions of LabVIEW do not have the application builder since it is intended for learning, and hobbyist, not for distributions.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

How can I read pdf files from LabVIEW with different versions of Acrobat reader?

How can I read pdf files from LabVIEW with different versions of Acrobat reader?
I have made a LabVIEW program where I have possibility to read a PDF document. When I made this LabVIEW program it was Acrobat Reader 5.0.5 that was installed on the PC. Lather when the Acrobat Reader was upgraded to version 6.0, there was an error when VI tries to launch the LabVIEW program. And Later again when we upgraded to Acrobat Reader 7.0.5 I must again do some changes and rebuild the EXE files again
It isn't so very big job to do the changes in one single LabVIEW program, but we have built a lot of LabVIEW programs so this take time to due changes every time vi update Acrobat Reader. (We have build EXE files.)
The job is to right click the ActiveX container and Click "Insert ActiveX Object", then I can brows the computer for the new version of acrobat Reader. After this I must rebuild all the "methods" in the Activex call to make the VI executable again.
Is there a way to build LabVIEW program so I don't have to do this job every time we update Acrobat Reader?
This LabVIEW program is written in LabVIEW 6.1, but I se the problem is the same in LabVIEW 8.2.
Jan Inge Gustavsen
Attachments:
Show PDF-file - Adobe Reader 7-0-5 - LV61.vi ‏43 KB
Read PDF file.jpg ‏201 KB
Show PDF-file - Adobe Reader 5-0-5 - LV61.vi ‏42 KB

hi there
try the vi
..vi.lib\platform\browser.llb\Open Acrobat Document.vi
it uses DDE or the command line to run an external application (e.g. Adobe Acrobat)
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

How to create the exe file for java project.

How to create the exe file for java project.
am done the project in java swing , i like to create the project in exe format, so any one help for me,
send the procedure for that.
thanking u.

How to create the exe file for java project.Have you ever heard of google? I pasted your exact "question" into a google search:
http://www.google.com/search?q=How+to+create+the+exe+file+for+java+project.
and got several useful links.
Better search terms might yield even better results.
Sheesh.

How to print a pdf file from Labview

Hi,
Does anyone know how to print a pdf file form Labview. I need to be able to point on the pdf file and to print it.
Activex examples doesnt seem to be working it always displays an error, on every PC that I tryed to run it.
{"code 3005" ,,,"Automation Open: Object specified is not creatable in Display PDF in Dialog.vi"}.
Thank you for your help.
Regards,
Jenia.

You can use the "System Exec.vi". The command line should have the following structure:
"<Path to AcroRd32.exe>" /t "<Path to document>" "Printer name"
For example"
"C:\Program Files\Adobe\Acrobat 5.0\Reader\AcroRd32.exe" /t "C:\myreport.pdf" "Tektronix Phaser 300i"
Regards;
Enrique
www.vartortech.com

How to download the exe file, rather then installing

hi, as my working pc has very low internet connectivity, how can i download and take this installable file to my pc? because when ever i click on download flash builder 4.7 trail it starts installing rather then downloading and getting saved in some location.. please help me

How to create the exe file for java project.Have you ever heard of google? I pasted your exact "question" into a google search:
http://www.google.com/search?q=How+to+create+the+exe+file+for+java+project.
and got several useful links.
Better search terms might yield even better results.
Sheesh.

How to open an external file in Labview?

Hi, Who knows how to open an external file in LabView? I want to open an .UDL file(data link API) which is a dialog window letting me input correlated database information, but I dont know how to open this type of file in my LabView Program.
Thanks.
Red

A UDL is technically a text file, so you could open it with "Read Characters from file", put the result string into a string control, edit it and save it back using the "Write Characters to File".
UDLs however have their own configuration dialog embedded in the Windows OS. You can use this dialog in your LabVIEW application. The attached VI shows how to create a new UDL. You can edit an existing UDL by switching the method node to PromptEdit and wiring in an open ADO connection reference.
Attachments:
ConfigureDatabaseConnection.vi ‏26 KB

Linking an exe file thru JEditorPane

Hi All,
I would like to link an exe file thru a JEditor Pane...
I have constructed a gui for an application using Swing and want to link a local exe file
thru it ie i would like the exe file to execute when i click on the link provided in the JEditorPane.
How should i go about it?
Thanx...

Are you talking about linking to your EXE in terms of a compiler link or just a communication link so your EXE takes care of the functionality and your java program provides the GUI only ?
I do not know if a compiler link is possible. I've never seen anything that allows you to do it.
If you just want your EXE to provide functionality then it is possible, but would take a fair amount of work. You can open sockets in both the EXE and Java programs and send messages back and forth. The GUI could request work to be done by the EXE and the EXE passes the results back to the GUI for display. An interesting note about this is that the EXE and GUI do not have to reside on the same machine.
Good luck,
Peter

How to execute a exe file using javascript on app window.load.

How to execute a exe file using javascript on app window.load.

Hi sb00349044,
As I have already mentioned in multiple replies to your previous questions, the SUMO forums focuses on providing help to end users with usage-questions and issues.
For developer-related questions, please refer to one of the many resources readily available that I have linked to in the past:
* [https://developer.mozilla.org/en-US/Firefox_OS MDN]
* [http://stackoverflow.com/questions/tagged/firefox-os StackOverflow]
* [https://lists.mozilla.org/listinfo Mozilla Mailing Lists]
- Ralph

Do I need "nilm.exe" file for labview to run properly?

I have some problems with the "nilm.exe". Sometime it create a lot of other file in Windows tak manager and it lock completely my computer. Do I need "nilm.exe" file for labview to run properly? Can I remove it from my computer ?
thanks in advance for your reply

NILM.EXE is the NI License Manager for Remote Panels. If not using Remote Panels then you do not need to use NILM.EXE. The following webpage shows how to disable nilm.exe:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/581a81c57ac0c10b86256b5a005f2975?OpenDocument
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect

How to open a .MAT file in LABVIEW

Hey everyone,
I currently have a .MAT image file which I would like to open in LABVIEW to apply some image filters. However, I am unsure as to how to open the .MAT file in LABVIEW. Ideally I would like to be able to open the .MAT file without using matlab, and it seems the only way to accomplish this task is through the mathscript node. I have attached an example of the image im trying to open, as well as the LABVIEW program which I would like to use on the image. Thanks for the feedback! =]
Attachments:
MAT_Image_Adjust.zip ‏1779 KB

Hi Boiler,
1) Do you have a choice in the format you export your data from MATLAB?
"ASCII Format
Complete the following steps if you want to import or export data between LabVIEW and the MATLAB® environment, the process is straightforward as long as you are using ASCII format.
From the MATLAB® environment to LabVIEW
To save a vector or a matrix Xin ASCII format with tab delimiter, enter the following in the command window or m-script file in the MATLAB® environment:
>>SAVE filename X -ascii -double -tabs
This creates a file whose name is filename, and it contains the data X in ASCII format with a tab delimiter.
Import the file into LabVIEW using the Read From Spreadsheet File VI located on the Programming»File I/O palette.
2) Have you tried using the mathscript node? Did you get any errors?
"Binary Format
Complete the following steps if you want to import or export data between LabVIEW and MATLAB®.
From the MATLAB® environment to LabVIEW
To read a .mat file in LabVIEW would require a VI to parse the file. This may be easier if each variable is saved to a separate file.
" -- this was done here, no ideas if it still works,
I want to read a Matlab MAT file into labview
Hope this helps, James
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!

How to execute a .exe file in java(Jsp) without using a process ???

Hi All ,
How to execute a .exe file in Jsp without using a process ??? ...
Is it Possiable ????

itsdhanasaraa wrote:
But as this a web application ... By using Runtime i'm getting some probs ..
Let me guess, you want your web application to run a program on the client and to your surprise that's not working?
Ain't gonna happen.
its taking more time to execute .... that's y is there any other option to execute .exe file other than Runtime.getRuntime().exec("filename");Write proper English and you may be taken more seriously.
1) it's not "taking more time to execute", whatever that's supposed to mean.
2) there's no other way to execute something. Not that you should every use even that way anyway
3) whenever you start thinking of executing external programs from Java, start thinking of not using Java in the first place.

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why do i need to do some settings for it ?

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined settings to run the cd's and dvd's ?

A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

How to create a exe file of a .class file

how to create a .exe file for windows .class file of java
please answer this so that i can complete the project to be submited to collage

There is a program called JET. Is enables you to create .exe files of .class files.
This is the URL:
http://www.excelsior-usa.com/jet.html
Succes
--=tReShR=--

How to run an exe file in a java program

Hi,
Can somebody tell me how to run an exe file in a java program.
Thank you!

Yes, java.lang.Runtime.exec().
Read this carefully before you do:
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html
Don't write a line of code before you're reviewed and understood the article completely. - MOD

How to link a exe file in labview

Similar Messages

Maybe you are looking for