How to link ECC Company code with BCS Consolidation unit

I have to create new consolidation unit in BCS, parallelly in SAP R/3 also I have created a company code.
I could read following in the forum :-
The Company Codes from ECC are assigned to the characteristic Company in BCS, thus creating a one to one relationship between ECC & BCS company codes.
BUT HOW TO DO THE SAME.
Also any advise on Profit centre and cost centre etc in BCS in line with ECC. This is first time I am configuring in BCS,

Typically in ECC company codes are assigned to a company. The company is typically used for cons unit in BCS, but it is not uncommon for company code to be used as cons unit.
When company code is used, it is an attribute of the characteristic company and thus in the load mapping, the company is mapped to the attribute company code. This results in company code being mapped to company.
Otherwise, if company code is in the databasis as the cons unit role, then it is simply mapped to company code to company code.
For profit center and cost center, these are typically assigned the role subassignment, but it is not uncommon for profit center to be a cons unit for a matrix consolidation. However, these characteristics must first be included in the totals/databasis infocube.

Similar Messages

  • How to Assigning the company code to the billing units from ecc to crm

    Hi,
    Iam doing the roll out project , i require the help.
    can any one suggest me how to assign the company code to the billing units from ecc to crm.
    Thanks
    Mustafa

    Hi Mustafa
    You can load this data from R/3 to CRM by going to transaction R3AS in your CRM system, and using load objects EQUIPMENT, MATERIAL, and CUSTOMER_MAIN.
    Best Regards
    Gavin

  • How to Mapping of company code to the billing units

    Hi,
    Please help me how to Mapping of company code to the billing units , iam doing the rollout project.
    Thanks
    Mustafa

    Hi Mustafa,
    External billing (A): Billing is controlled in the R/3 System.
    The company code is determined by the accounting adapter which calls
    the R3 system. You define the company code to be transferred in
    Customizing under:
    Customer Relationship Management
    Master Data
    Organizational Management
    Cross-System Assignment of Organizational Units
    Assign Company Codes and Business Places to Billing Units or
    Assign Company Codes to Billing Units.
    Also you can check attached note 717476 for further information.
    Cheers,
    Brian.

  • How to get list of company codes with current period not opened?

    Hi,
    How to get list of company codes with current period not opened?
    Is there any way we can check whether the current period is opened for all company codes.
    If not how, can we generate a report which having information of period and company code. Also please tell me, which table will have info on posting periods and company codes.
    Thanks
    Vineeth Varghese

    Hi,
    The MM periods details can be viewed In Table MARV . On the selection screen you have the option of entering the company codes , current period, year current period etc. so make the required entries and you get the all details relevant to MM periods. Also it can be downloaded as a report.Thanks

  • Workschedule - linked to company code

    Hi Gurus,
    Working on a support project, client has given the details of the company code and name of the workschedule, which is to be copied to a different company code..
    How can i get the details of the groupings which ls linked to the company code to a specific work schedule.
    There are nos PA and PSA assigned to this company code. Do i need to check each and every PA/PSA assigned to this company code to get the details.
    Please let me know the table where i can view workschedule according to the company code.
    early replies would appreciated.
    Regards,
    M Bharath

    The link is Company Code > PA/PSA > PSA groupings > Work Schedules.
    Go through the IMG nodes (instead of individual tables): Where almost every configuration activity begins with assigning groupings. One of the easiest ways to carry out this transfer is assign the same personnel subarea groupings (that are present in your source company code) to the personnel subareas in your destination company codes.
    You will have to regenerate the work schedules for all such groupings after all configuration activity is completed.
    Please be aware that Work Schedule Rules also have Employee Subgroup Groupings -- something which you will have to ensure is in place in your destination company code.

  • How to find out company code from a plant ?

    Hello friends,
    I have to modify a program that uses FM "BAPI_COMPANYCODE_GET_PERIOD".   For that, we have to export company code ID.  Currently it is hard coded with one company code.  Now we want to make this program usable by all company codes.  So instead of hard coding, I would like to dynamically find out company code based on the plant.   So I want to know - how to find out company code from a plant ?  Is there any table that has plant to company-code assignment data, or any other FM/BAPI to get this info ?
    Thanks,
    - Chetan

    hi
    u can find this from table T001K
    or just goto EC01
    here click on STRUCTURE>NAVIGATION
    double click on co code u will get the list
    u can slo try this in EC02
    regards
    kunal

  • How to setup a company code for material management

    Hi,
    While creating material in MM01, in sales org tab, when I gave plant XXXX, it is giving an error "Company code YYYY is not setup for material management".
    So can you help me , how to setup a company code for material management
    Help is appreciated
    thanks
    DIL

    Hello Sendil,
    You can maintain it with trns code OMSY or MMPI/MMPV.
    Hope this helps
    Regards
    Arif Mansuri

  • Remove Company Code with all the Employees in it from r/3?

    Hi i have a bit unusual requirement.
    i want to know how can i Remove a Company Code with all its assigned Employees completely from a system(r/3) ?
    can this be possible at all? if yes then please also mentions what can be the side effects of this action.

    Jack,
    You will have to follow reverse engineering....
    As Sikandar Guru Mentioned.....identify all the PERNRs for mass deletion....
    Secondly I believe, that you want to Delete the Company Code.....check with Finance Folks.......If they have no issues, you can delete the co. code with TCODE EC01... but this will not delete the Relationships to Personnel area...etc.
    There may be custom Features, Reports or programs functioning based on Co. Code.......
    So, in a way....its not feasible..neither wise to attempt deletion of Co. Code....
    S_PHO_48000106 is the TCode for Mass Deletion.
    Good Luck !!!
    Kumarpal Jain.
    Edited by: Kumarpal Jain on Oct 26, 2009 3:20 PM

  • Company codes with different fiscal year variants in a controlling area

    Hi all,
    When I try to assign a company code with different fiscal year variant than controlling area I get error. It is ok so far.
    However, after assigning company with same fsv to controlling area the system lets me to change company code's fsv in company code global settings and I can even save it.
    So I wonder how it would be possible ? Why do I get just a warning instead of an error and save ?
    Thanks and regards.
    M.Yusuf Dogan

    Hi Bulut,
    There are 12 normal and 3 special periods in the fsv of the company code which i'm trying to assign. However, controlling area's fsv has 12 normal and 4 special periods.  I get an error message "KT297".
    Actually, my point is that if the company code's fsv is same with co's I can assign but the system lets me change cc's fsv after assignment.
    M. Yusuf Dogan

  • How to stop the Company Code popup window in MIRO!

    Hi,
    When User logs in the system and enters into the MIRO transaction, he is asked to enter the Company Code first in order to proceed further. I know that once you enter the company code then the system does not ask it to enter again during that login, however, it will asks again whenever User login the system again!
    Can someone tell that how to stop this Company Code popup window in MIRO, so that the system should not ask for the Comp Code whenever User logs in and enters into MIRO? I think there are some entries maintained in the User Master for this!
    Thanks.

    Hi,
    It is Necessary for the user to enter the company code for which he need to process the Invoice.
    First think is if the user knows ,that he is only going to do for one company code.then
    in the T code SU3.
    In the parameter TAB
    you can make the Default value for the parameter ID BUK as your Comany Code value ( Eg 1000)
    so that when ever the user does the MIRO ,it comes with that company code only.
    and if he want to do for another comapany code ,he has to use the option of Switching the comapny code.
    so this is user dependent and has to be made for all users.
    Note .the above setting works only you have entered saved and logged off and log in again.
    also ,this value gets defaulted you all the comapny codes in all screen.
    Hope so it helps.
    Regards
    Anjanna.

  • Adding cost center on OKB9 with cost element company code with valuation ar

    hi ,
    can anybody help me out with the Adding cost center on OKB9 with cost element company code with valuation area configuration.
    i have to do this configuration but do not know the detailed steps for that one.
    Good points will be awarded.

    Hi Prem
    Select the 1 in column acct assignment details column then in the left side in detail per business area/valuation area enter your valuation area.
    Thanks
    Ashok

  • How to link the Business Partner with the SAP User ID.

    Hi,
    We are working on a scenario wherein the resources are created as Business Partners in R/3.
    now How to link the Business Partner with the SAP User ID.

    HI AP,
    Maintain the business partner in role Internet User - BUP005.
    Now assign the existing user to this BP .(you can make this assignment in tab "internet user'. Just enter the user name in the field User and save).
    You can now see the link in table HRP1001.
    Cheers,
    Rishu.

  • How to link one scroll bar with two dynamic text boxes.

    How to link one scroll bar with two dynamic text boxes.
    If i move scroll bar in one text box,automatically text will
    be moved in another text box.But scroll bar is not visible.
    Can you please help me.
    Thanks in advance.

    See the following article:
    JavaScript - setFocus Method for tabbing to next form field
    And see if iOS can even handle the sample form.
    iOS and android devices are not a powerful as your desktop of laptop computer and have limited support for JavaScript within PDF forms. This limitation for specific apps ranges from none to quite a bit but not all JavaScript.

  • How to find company code and its org unit?

    Hi All,
    For a given company code, i need to find its org unit. Please let me know the info type table or any FM.
    Thanks,
    SKJ

    Hi Ravi,
    Yes, i just came to know about that. I clicked on account assignment features button in PPOS_OLD and specified pers area, pers sub area and company code and found that an entry was created in HRP1008 for the company code with org unit.
    Thank you very much.
    SKJ

  • Manually updating company names for a given company code in BCS

    Is there a way where we do not have to manually update the names? we update the company names in UCWB > Master Data > Consolidation Units > Company
    We are maintaining the updated company code names in the source system but how can we do away with maintaining it separately in BCS? Is there a program that we can run in SAP to update the legal entity names as seen in BCS? Please advise.

    Dan is right to be cautious, i've seen this cause problems.
    It's not very difficult to make the chnages in BCS, and if you have a lot of them/frequent changes, you can always use create an upload method
    and then make all future changes by .txt file

Maybe you are looking for