How to link video and audio channels of multiple clips

Importing iMovie08 sequence via XML ends up with unlinked video and audio channel (only one of the stereo channels; see other post).
It is possible to link each clips audio and video track individualy.
Is there a way to do it in batch mode for all the clips in de timeline??

Dennis Connors wrote:
1. After selecting the in points on main audio and one of two video tracks, the "merge clips" is greyed. Yes,in case you're wondering, the audio is on the HD.
Your use of language is confusing me I'm afraid. You opened the AIFF file and set an IN then opened a QuickTime movie and set and IN and then with them both selected in the Browser (and the Browser the active window) that you cannot select Modify->Merge Clips... ?
I wasn't wondering anything about your audio, but now I'm wondering "What does 'the audio is on the HD' mean?"
2. The other issue is that the starting point is silent, so the only I know how to find the actual beginning is by counting frames back from the first sound. Is that what I have to do? Is would seem to me that there must be a "marker" that's not and "in" or "out" that will allow me to merge the tracks. No?
If you set an IN point in two clips you can merge them using the Merge Clips... command with the in points option. The IN points you choose can be anywhere and for anything. They can be where the clapper hits and sounds, they can be where a drum stick hits a cymbal, they can be where someone is clapping, they can be where a body falls from a building onto the sidewalk... Anything that helps you sync the sound with picture.

Similar Messages

  • How to transfer video and audio files from windows PC to new ipad?

    How to transfer video and audio files from windows PC to new ipad?

    iTunes: Syncing media content to iOS devices and iPod
    Sync with iTunes.
    Connect the iPad to the PC and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Music Tab on the right.
    Click on all of the albums, artists, playlists that you want to sync
    Click on the Sync Music Heading.
    Click on Apply in the lower right corner of iTunes
    Follow the same procedure for Movies.

  • How to unlink video and audio in FCPX

    I am new in FCPX.. can someone tell me how to unlink video and audio in FCPX ? and how to mute audio rather than low the -db ?

    There's no 'Unlink' audio (as such) in FCP X but if you select a clip in the timeline, and press Shift+Ctrl+S, the audio breaks away from the clip. Select this, and you can toggle it on and off by pressing V.
    Take care with this, because it's easy to get the audio out of sync. You need to move the audio and video together if you have to move them, so I would select them both and press Option+G to make them into a Compound Clip (to preserve sync).
    To mute the audio embedded in a clip, select the clip in the timeline and press Cmd+4 to open the Inspector.
    Click the Audio Tab at the top of the Inspector and uncheck the Audio Waveform(s). Your Audio will be muted.
    To mute audio for the entire project, go to the Roles tab in the Timeline Index (next to the film reel icon) and uncheck Audio or Dialogue (as appropriate).
    Andy

  • Linked video and audio do not move together on timeline

    Hello, I have been working in a project for a couple of days and cannot find out why the video and audio do not move together when one of them is dragged laterally on the timeline. They are linked yet do not move together. I seem to remember one of the first clips I dragged down to the timeline did what it should but they do not behave as they should. If I click on both clips the only option is unlink. When I move one part in the timeline it shows me how much they are out of sync.Any ideas?
    ~Grant

  • I have a clip with synchronized audio. When I trim a section of video it does not trim the audio. How do I trim both video and audio so that the clip remains in sync?

    Why is FCPX not allow me to cut both video and audio tracks at the same time?
    My separate synchronized audio does not trim when I trim the video. They are connected and synchronized.

    fulei wrote:
    The audio track does not edit along with the video. They go out of sync
    Sounds like a different problem than your trim problem in the first post. If your problem is they drift out of sync, we'd need to knoow more about the project and clip properties – including how the audio file you're syncing to was created.
    Russ

  • How can synchronize video and audio?? (Help me!!)

    I was writen a Client/Server program, but in Client's part Video and Audio doesn't not synchronize thought i was used method in 2.0 programer guide (use Player control Controller). Any one can help me??

    http://java.sun.com/products/java-media/jmf/1.0/guide/JavaMediaFrame.fm7.html

  • Cutting and saving individual video and audio files from a clip

    I have to cut 201 individual video and audio files for separate scenes from an 11-minute animated episode and save them as separate MP4 video and MP3 audio files. What is the most efficient way to do this?

    Without knowing more about your project, it's hard to even guess at the most efficient workflow.
    Like: Do these clips have audio or are you adding it? What format are these clips? What is the intended delivery for the 11 minute movie?
    As a general matter, one creates an event, imports clips to it. Then organizes the clips according to the needs of job, using keyword collections and ratings. Then creates a project and starts a rough cut by marking ranges in the event browser and editing to the time line. Some people start with the music, making that the primary storyline mark where they want the edit to be and cut to that.
    Upon finishing, one can choose one or more of the "destination" presets. It's possible to export Audio only or Video only or both. MP3 is one of the audio choices. Some of the presets are MP4. If you want possibly better quality and more control, export the files as master files and encode in Compressor.
    Good luck.
    Russ

  • How to Slice Video, and Audio at same time

    Hello Everyone.
    When I click on Control K, it dose create a Slice in my Timeline, I want to create a Slice for my Audio as well,  at the same time.
    But every time I Slice a Video, and when I want to delete the Slice portion of the movie that I cut, the audio is still there, and I have to use the Razor Tool to select the cut portion under the Sliced movie.
    Thanks
    Simon.

    Rod,
    Through CS3, Ctrl+K worked on all Unlocked Tracks. With CS4, things changed a bit, as one could now Target multiple and even none contiguous Tracks. Ctrl+K still functions the same BUT now only affects Tracks that are Targeted, so no need for Locking them anymore. This has not changed with CS5.
    Hope that this helps - it was changed as of CS4.
    Hunt
    PS - another workflow in CS3 and before, is to do the Crtl+K and then just ignore the Cut in some of the Clips, and just Alt+clicking on what you wish to remove, leaving the others alone. Though there is a Cut, one does not have to concern themselves with them, unless they wish to. Personally, I like the CS4 and later way of doing it - saves that Locking/Unlocking, or having to Alt+click to do things. However, I am a lazy sot.
    PPS - Colin brings up a good point - how one has mapped THEIR keyboard shortcuts.

  • How to get video and audio while chatting with your PC friends.

    Just download a program called ivisit.
    http://www.ivisit.com/
    Everything else I tried sucked. Nothing worked. Yahoo, MSN, AOL IM... they all crapped out. But ivisit rocked right out of the gate, and you can get it free.
    WIth the lite version you get only one connection and it lasts for an hour. After the hour you lose video but audio and chat still works. You have to be disconnected fro the other user for a half hour for the video feed to work again.
    But if your itching to connect to your family with your new iSight and all the other big name programs are disapointing you, then one hour is plenty of time.
    ivisit saved my christmas.

    I agree. iVisit was a lifesaver. I was regreting getting my iSight until I had a successful connection. It was truly a Macintosh program - easy to setup, intuitive, not too much tech stuff to resort to figure out how things work. I was unhappy with resolution, though. You have to pay to get good resolution.

  • Video and audio sync when viewing clips online

    When viewing clips, like on youtube, the graphics start playing, however there is no sound, only after a few seconds the graphics freeze and the sound that was missing starts playing and the graphics resume when they're in sync again.
    Also when I pause a video and click play the clip will not resume and I have to click the "time bar" and then it will play.
    My 13 MB Pro starts furiously blowing the cooling fan and consuming battery life when viewing clips on most video sites.
    How can I fix these things?
    This already happened before upgrading to Lion, btw.

    Are you capturing this thru the LS? and what is the format you are digitizing? DV? or uncompressed? Would be best I'd think if you don't capture audio and video as separate files too. That leads to problems especially with DV captures.
    How are you monitoring the audio and video? all from computer or? You could be in sync and not know it if you are using computer speakers for monitoring audio when watching video externally for example.
    If you monitor both from the computer and it is in sync, but not when you record to video, I'd suggest that you export a self contained movie of this material and import that for the print to the beta... I'll wager that will keep your sync. If this doesn't help, might want to post this in the AJA KONA forum at http://www.creativecow.net Might be something to do with your LS, not sure but do have the latest drivers installed on it...
    Jerry

  • Re-linking video and audio

    Hi,
    I had to take a clip I captured and fix it because the audio went out of sync after the camera began filming again for some reason. So I had to take the clip and move the audio over by one second. How do I re-link the audio and video after cutting it so that it is one clip and it is easier to cut without having to worry about both audio and video separately?
    Thanks

    Select both your audio and video clips. Press Shift & L keys.

  • QT 7.1.5: How to merge Video and Audio tracks?

    I have a movie without a sound track and a mp3-file which I want to merge. I know that both should have the same length.
    First I opened the audio file, selected all, copied it - then opened the video file, selected all and pasted it. Sounds good and functioned properly.
    Trying to start the movie on another Macintosh, QT asks for the mp3-file. What went wrong, what to do?
    Greetings from the middle of Germany
    Herbert

    You failed to save the new file as "self-contained".
    You should use Save As and check the box for self-contained.

  • How to download video and audio files

    Pl tell me how to download mp3 & mp4 files from fox browser

    hello afrozahamed, please have a look at the following article which should cover your question: [[How do I download music, photos and videos from the browser?]]

  • How to send video and audio (videoconference) using JMF without using RTP

    Hi everyone,
    I am creating an application using JMF, a videoconference, but I would like to transmit the packets by myself without using RTP. I would have a socket (or virtual Serial Port -- > Bluetooth) and I would send the info that way. Is it possible??
    Thanks in advance!!
    Cheers

    Yeah, you'd need to implement something like this for that.
    [http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/RTPConnector.html]

  • Linking All Video and Audio Clips at Once

    I'm running the most recent version of Premiere CC 2014 on OSX.
    Somehow I accidentally unlinked every video and audio track on my timeline (I didn't make them offline - I unlinked them so that they select independently on my timeline when I want linked video and audio from the same clip to select simultaneously).
    I don't want to have to go through my entire timeline and re-link every clip. Is there a way to easily select all media and link it? I've tried highlighting everything, right clicking and selecting "Link," but this hasn't worked.
    Any tips would be appreciated.

    I have to start you from the beginning to make sure everything is set correctly.
    Under the Edit menu, make sure "Linked Selection" is checkmarked (also Shift+L).
    Once that is done, make sure the video clip is linked the it's corresponding audio in the timeline. Do this by selecting them all, and choosing "Link" under the Modify menu (or hitting command + L).
    Try that and if it doesn't work we'll go from there.
    Joni

Maybe you are looking for

  • How big a Hard drive can my macbook take

    2 GHz Intel core 2 Duo , 80GB hard drive ,1GB ram ,late 2006. i want to upgrade my hard drive , i want to go as big as possible on my macbook. At the apple support site ,its said this macbook can only take up to 200GB , is that true ? because i have

  • Installation of Enhancement Package 1 in SAP NetWeaver 7.0

    Hello, We have install the Enhancement Package 4 in the server ECC 6.0 with EHP3. But, before we need install the Enhancement Package 1 in SAP NetWeaver 7.0 The actual Kernel is releae 700 level 185. We download the kernel 701 for Windows 64 unicode

  • How Do You Drag A Document You Have On A Mac Onto An External HardDrive??

    Ive just recently bought a Macbook Pro and was wondering how can you drag a document onto an external hard drive. Is it the same as Windows?? Because everytime I try that, it wont let me :s. If anyone could help it would be awesome because I need to

  • Convert pdf to text in adobe pro x

    I would like to convert a PDF document into text.  Can someone advise?

  • Axis Web Service SOAP Response without namespace

    Hi folks, I use the Axis Framework and eclipse to create a Webservice. I wrote a Method which returns a List of customers(complex Element). When I execute the method I get the following result: <soapenv:Body> <getAllCustomersResponse> <ns1:getAllCust