How to list the abap programs order by updated date in ECD

Hi experts,
how to list the abap programs order by updated date in ECD?
thanks.

I wrote a custom program for displaying Z* development work into an ALV report. 2500 character limit prevents me from posting, message me your email and I'll send you source code.
Edited by: Brad Gorlicki on Feb 18, 2010 11:25 PM

Similar Messages

How to debug the abap program ?

how to debug the abap program ?Can anybody explain me in details.

Hi
Debugger
This section of the ABAP Workbench documentation provides information on how to use the Debugger as a test tool for finding errors in the source code of an ABAP program.
Functional Overview
Use
The ABAP Debugger is an integrated test tool within the ABAP Workbench. You use it to check the program logic and to find errors in the source code of an ABAP program. In the Debugger, you can step through the source code of a program. The running program is interrupted after each step, allowing you to check its processing logic and the results of individual statements.
As of Release 6.10, you can also run Business Server Pages (BSP) in the debugging mode. You can also display and set breakpoints here. Business Server Pages can be displayed in the Object Navigator when you select an appropriate application under BSP Application.
Features
The Debugger provides an efficient means of identifying errors in ABAP programs. It contains the following functions:
Ways of starting the Debugger
Choosing different views
Choosing different execution options in the Debugger
Displaying source code in the Debugger
Setting and deleting breakpoints
Setting and deleting watchpoints
Stopping a program at a particular statement or event
Displaying and changing field contents at runtime
Displaying ABAP Objects and references
Displaying and positioning strings
Setting and deleting database locks
Opening the ABAP Editor, or Object Navigator
System settings and runtime warnings
Starting the Debugger
There are two possible strategies for starting the Debugger in the ABAP Workbench:
By setting breakpoints then running the program
By running the program in debugging mode.
Setting Breakpoints
A breakpoint is a signal in a specific line of the program source code. This signal indicates to the ABAP runtime processor to stop the program at the relevant line and start the ABAP Debugger. A distinction is made between static and dynamic breakpoints. For further information about the different types of breakpoints and how to use them, refer to Breakpoints.
Direct Processing
You can start the Debugger without previously having set breakpoints. This is the best procedure to use when you want to test a program right from the beginning. It is also a useful procedure if you are not overly familiar with the program and therefore are not sure where best to set breakpoints. You can start the Debugger as follows:
From the Object Navigator
Select a report or transaction and choose Program ® Test ® Debugging.
From the ABAP Editor
Choose Program ® Execute ® Debugging (or the Debugging pushbutton).
From any screen
Choose System ® Utilities ® Debug ABAP.
From any screen
Enter /h in the command field.
Display Modes in the Debugger
When you are debugging a program, there are various display modes that you can use. All of the display modes have the same structure. The top part of the screen displays an extract of the program source code. The bottom part displays the information specifically available in that display mode. There are also pushbuttons on the screen allowing you to switch to the most frequently-used display modes.
Display Modes Available Using Pushbuttons
Fields
The scrollable field display contains the contents of up to eight fields. The contents of the three most important system fields are always displayed. This is the default display mode in the Debugger. See also Processing Fields
Table
Displays the contents of an internal table. This mode allows you to display and edit the entries in an internal table. See also Processing Internal Tables
Breakpoints
A scrollable display containing up to 30 breakpoints. Next to each breakpoint is a counter. You can also delete breakpoints in this display. See also Managing Dynamic Breakpoints
Watchpoints
You can set a watchpoint for a field so that the program is interrupted whenever the value of that field changes. This display mode contains a list of watchpoints, the fields and programs to which they are assigned, the current values of the fields, and the conditions upon which the watchpoint is activated. See also Setting Watchpoints
Calls
This mode displays the current sequence of events, and the sequence of calls up to the current breakpoint. The last active call is displayed at the top of the list; previous calls are listed in reverse chronological order. When an event (for example, START-OF-SELECTION) concludes, it is deleted from the display.
Overview
This mode displays the structure of the program. It lists its events, subroutines, and modules, and shows which sections belong to which events. It also displays the section currently being processed.
Settings
This mode displays the current Debugger settings. You can change the settings by selecting or deselecting various options. For further information, refer to Settings and Warnings
Other Display Modes
You can access other display modes by choosing Goto ® Display data object.
Single field
Displays the contents and technical attributes of a field.
Structured
field
Displays the components of a structure, along with their contents and attributes. If you double-click a component, the system displays detailed information for it.
Strings
Display the content and current length of the string. You can also display part of the content by means of offset and length.
Internal table
Displays the type, line numbers and contents of an internal table.
Object
Displays the structure of an ABAP Object.
For further information on these displays, refer to Displaying Attributes and Displaying ABAP Objects
Checking System Programs for Errors
To check a program or program component that is part of the ABAP Workbench (for example, the Screen Painter), you must use the system Debugger. To start the system Debugger, choose System ® Utilities ® Debug System from any screen. To stop the system Debugger, choose Debugger ® Debugging off.
Displaying Program Attributes
You can display the attributes Fixed Point Arithmetic, System Program, and Unicode Checks of the program that has just been executed by choosing Goto ® Further Information ® Program Attributes.
Restarting the Debugger
If you choose Debugging ® Restart, debugging mode is stopped and the system takes you to the initial screen of the last transaction you called. If, for example, you started an ABAP program in debugging mode from transaction SE38 (ABAP Editor), choosing Debugging ® Restart will take you back to the screen titled ABAP Editor: Initial Screen. If you want to restart the program in debugging mode, choose Debugging.
Breakpoints
Apart from direct execution of an ABAP program in the Debugger, it is also possible to start the Debugger call by the exact setting of a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The program runs normally until the breakpoint is reached.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For further information, refer to Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
The BREAK-POINT statement in an ABAP program. Static breakpoints are not normally user-specific. However, you can make them user-specific.
Directly-set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statement
The Debugger stops the program directly before the specified statement is executed.
Breakpoints
at subroutine
The Debugger stops the program directly before the specified subroutine is called.
Breakpoint at function module
The Debugger stops the program directly before the specified function module is called.
Breakpoint at method
The Debugger stops the program directly before the specified method is called.
Breakpoints at system exceptions
The Debugger stops the program directly after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are not normally user-specific. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application, when the program execution is always to be interrupted at the same place. For further information, refer to Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints, because you can deactivate or delete them at runtime. They have the following advantages:
You do not have to change the program code
You can set them even when the program is locked by another programmer
You can define a counter that only activates the breakpoint after it has been reached
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For further information, refer to Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they are effective during the entire user session, if they are saved by choosing Breakpoints ® Save in the ABAP Debugger. For more details on the subject of sessions and user sessions, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
Breakpoints at Statements
You can use this special kind of dynamic breakpoint to interrupt a program directly before an ABAP statement is processed.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at an ABAP statement:
1.Choose Breakpoint ® Breakpoint at ® Statement...
The following dialog box appears:
2.Enter the ABAP statement.
The system sets a breakpoint at all points in the program at which the ABAP statement occurs.
3.Choose ENTER.
The breakpoint applies to all lines containing the specified statement.
Result
The system confirms the breakpoint and adds it to the list in the display. When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Breakpoints at Subroutines
You can use this special kind of dynamic breakpoint to interrupt a program directly before a subroutine is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a subroutine:
Choose Breakpoint ® Breakpoint at ® Event/Subroutine.
The following dialog box then appears:
Enter the name of the subroutine before which you want to interrupt the program. By default, the Program field contains the name of the program that is currently active. The system sets a breakpoint wherever the specified subroutine occurs in the program code.
Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
Breakpoints at Function Module
You can use this kind of dynamic breakpoint to interrupt a program directly before a function module is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a function module:
Choose Breakpoint ® Breakpoint at ® Function module...
The following dialog box appears:
Enter the name of the function module before which you want to interrupt the program. The system sets a breakpoint wherever the specified event, module pool, or subroutine occurs in the program code.
Choose ENTER.
Result
If you entered a valid function module name, the system confirms that the breakpoint has been set. If the function module exists in the system, the new breakpoint is added to the display list.
Breakpoints at Methods
You can use this special kind of dynamic breakpoint to interrupt a program directly before a method is called.
Prerequisites
You must be already running the program in the debugger.
Procedure
To set a breakpoint for methods:
1. Choose Breakpoint ® Breakpoint at ® Method...
The following dialog box then appears:
2. Enter the name of the method and class before which you want to interrupt the program. A breakpoint is then set each time the specified processing block appears in the source code.
3. Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the list in the display.
Breakpoints at System Exceptions
You can use this special form of dynamic breakpoint to interrupt a program immediately after a runtime error has occurred.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at a system exception:
Choose Breakpoint ® Breakpoint at ® System exception.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
When a system exception is triggered, a warning triangle appears in the line containing the statement that caused it. If you double-click the warning triangle, the internal name of the runtime error appears.
Static Breakpoints
You should only use static breakpoints during the development phase of an application. You must remove them from your program before you transport it.
Setting Breakpoints
To set a static breakpoint, use the ABAP statement BREAK-POINT . Place the breakpoint in the line at which you want to interrupt the program.
program RSDEBUG_01.
if SY-SUBRC 0.
break-point.
endif.
When you run the program, the runtime processor interrupts it when the breakpoints occur. You can number your breakpoints to make them easier to identify ( BREAK-POINT 1, BREAK-POINT 2 ).
Static breakpoints are not normally user-specific. The program is, therefore, always interrupted as soon as the runtime processor reaches the line containing the breakpoint. The program is interrupted regardless of the user who executes it.
However, you can set user-specific static breakpoints using the BREAK statement followed by your user name. For example, if you use the statement BREAK SMITH , the program is only interrupted when user Smith runs it. Although user-specific breakpoints appear in the program code, they are not active when other users run the program. You should, however, be careful if an application is being used by several users with the same name.
Deleting Breakpoints
Since static breakpoints apply to all users, you must remove them from the program once you have finished testing it. In the ABAP Editor, you can find breakpoints quickly by choosing Utilities ® Global search. You can also use the Extended Program Check to find them.
If you do not remove static breakpoints from your program, they will be transported to your production system. This could cause serious problems in the production system.
Dynamic Breakpoints
You can set up to 30 dynamic breakpoints without changing the program code. Dynamic breakpoints can be set either in the ABAP Editor or directly in the Debugger.
Setting Dynamic Breakpoints in the ABAP Editor
You can set dynamic breakpoints in the ABAP Editor regardless of whether you are in display or change mode. You can also set breakpoints directly from within the Debugger at runtime. To set a dynamic breakpoint in the ABAP Editor:
Position the cursor on the line of the source code at which you want to set the breakpoint.
Choose Utilities ® Breakpoints ® Set or the Stop icon. The system confirms that the breakpoint has been set.
To display a list of all dynamic breakpoints in a program, choose Utilities ® Breakpoints ® Display. You can use this list to navigate to a particular breakpoint or to delete one or more breakpoints from the program.
Setting Dynamic Breakpoints in Debugging Mode
To set a dynamic breakpoint in the Debugger:
Position the cursor on the line in which you want to set the breakpoint.
Select the line by double-clicking it or choosing Breakpoint ® Set/delete.
The system sets the breakpoint, and displays a small stop sign to the left of the relevant line. If the line already contained a breakpoint, it is deleted.
When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Saving Breakpoints
If you want to leave the Debugger temporarily, you can save your dynamic breakpoints so that they are still active when you return to the Debugger within the same terminal session.
To save the breakpoints that you have set in the Debugger:
Choose Breakpoint ® Save.
The system saves all of the breakpoints that you have set in the current program. These breakpoints will remain active until you either explicitly delete them or log off from the system.
You can also delete breakpoints that you have saved:
By deleting individual breakpoints from the display and then saving again. In this case, only your selected breakpoints will be deleted.
By choosing Breakpoint ® Delete all. In this case, the system deletes all dynamic breakpoints.
Managing Dynamic Breakpoints
The ABAP Debugger provides a convenient user interface for managing breakpoints. To open the breakpoint display, choose Breakpoints, or, from the menu, Goto ® Control debugging ® Breakpoints.
Example
Functions
This display mode contains the following functions for breakpoints:
Breakpoint Display
The scrollable breakpoint display contains up to 30 dynamic breakpoints. For breakpoints that you set directly, the program name and line number at which the breakpoint occurs are displayed. For special breakpoint forms, the list displays the statements, events, subroutines, and module calls at which the relevant breakpoints are set.
Counter
In the breakpoint display, you can specify a counter. When you use a counter, the breakpoint is not activated until it has been reached a specified number of times. For example, if you enter 5 for the counter, the breakpoint is not activated until it is reached for the fifth time. After the breakpoint has been activated, it remains so, and the counter no longer appears in the breakpoint display.
Deleting Breakpoints
Position the cursor on the breakpoint that you want to delete, and either double-click the line or choose Breakpoint ® Set/delete. To delete all breakpoints, choose Breakpoint ® Delete all.
Activating and Deactivating Breakpoints
Position the cursor on the breakpoint that you want to activate or deactivate and choose Breakpoint ® Activate/deactivate.
Watchpoints
Like a breakpoint, a watchpoint is an indicator in a program that tells the ABAP runtime processor to interrupt the program at a particular point. Unlike breakpoints, however, watchpoints are not activated until the contents of a specified field change. Watchpoints, like dynamic breakpoints, are user-specific, and so do not affect other users running the same program. You can only define watchpoints in the Debugger.
Use
You set watchpoints in the Debugger to monitor the contents of specific fields. They inform you when the value of a field changes. When the value changes, the Debugger interrupts the program.
Features
You can set up to five watchpoints in a program.
See also Setting Watchpoints.
You can also specify the conditions on which a watchpoint is to become active.
You can specify logical conditions between up to five conditional watchpoints.
See Specifying a Logical Expression.
You can define watchpoints as either local or global. If you define a global watchpoint, it is active in all called programs. Local watchpoints are only active in the specified program.
You can change and delete watchpoints.
See Changing Watchpoints.
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables.
See Memory Monitoring with Watchpoints
Setting Watchpoints
If you want to interrupt a program when the contents of a field or structure change, use a watchpoint. You can set up to five watchpoints, including watchpoints for strings.
A watchpoint can be either local or global. Local watchpoints are only valid in the specified program. Global watchpoints are valid in the specified program, and also in all the other programs it calls.
Procedure
To set a watchpoint, start the Debugger and proceed as follows:
Choose Breakpoint ® Create watchpoint or the corresponding pushbutton. The Create Watchpoint dialog box appears:
Decide whether you want to set a local or global watchpoint.
Enter the program and the name of the field for which you want to set the watchpoint. In the Program field, the name of the program currently running is always defaulted.
If you want your watchpoint to be activated each time the contents of the field change, the definition is now complete, and you can return to the Debugger by pressing ENTER .
To create a conditional watchpoint, that is only activated when a particular situation arises, choose one of the following relational operators.
Operator
Meaning
<
Less than
<=
Less than or equal
=
Equal
<>
Not equal
=
Greater than or equal
Greater than
You can use the Comparison field option to specify whether the comparison is to be carried out with a value that you specify or with the contents of another field. Depending on your choice from step 6, enter a value or a field for the comparison.
Result
The system confirms the watchpoint and adds it to the list in the display. When you finish your debugging session, the watchpoint is automatically deleted unless you have explicitly saved it.
Specifying Logical Links
If you have more than one conditional watchpoint, you can specify a logical link between them:
OR
Only one of the specified conditions must be met
AND
All of the conditions must be met.
Changing Watchpoints
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list. The following dialog box appears:
Choose the pencil icon in the line containing the watchpoint you want to change.
Change the watchpoint attributes in the Create/Change Watchpoint.
Choose ENTER .
Deleting Watchpoints
You cannot delete watchpoints by choosing Breakpoint ® Delete or Breakpoint ® Deactivate/activate. Instead, proceed as follows:
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list.
Choose the trashcan icon in the line containing the watchpoint you want to delete.
Memory Monitoring with Watchpoints
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables. By placing an ampersand (&) in front of the object name, you can display the reference in question in hexadecimal format. With internal tables, you can also display the table header by placing an asterisk (*) at the beginning of the name.
&objectname
Displays the references of strings, internal tables as well as data and object references
*itab
Displays the table header of the internal table itab
Example
If a watchpoint is set for the object in question at runtime, the program is stopped as soon as the reference is changed. A short dump can be intercepted in this way to stop the program being terminated when the memory is overwritten.
Analyzing Source Code
The Debugger contains an extensive range of functions that help you to analyze the source code of a program. You can step through the source code of a program in four different ways. For further information, refer to Stepping Through the Source Code
For information about functions within the source code display, see Displaying the Source Code
There are also different display modes that provide various information and display the contents of individual fields, tables, and so on:
Reward if usefull

How to call the abap program in workflow

HI Exeprts,
I need to call one abap program in workflow.
can any tell me how to call the abap program in workflow.
thanks &regards
ramesh

Dear Ramesh,
U can use REPORT business object.
Method : EXECUTE_2
Regards,
Sagar

How to access the abap program from MS Excel?

Hi ,
How to access the abap program from MS Excel or MS access ?
The abap program "z..." has the below input and output attributes
Input : Date,Index and file name with location (.htm or .xls)
Output : htm or xls file downloaded at the above location.
Please help me here.Do we haev to use BAPI and RFC?If yes,please tell me how to use them
Regards
Dinesh

Maybe this could help you up -;)
[Simple SE38 Emulator using Microsoft Excel|Simple SE38 Emulator using Microsoft Excel]
Greetings,
Blag.

How to generate an OUTBOUND INVOICE IDOC from the ABAP Program?

How to generate an OUTBOUND INVOICE IDOC from the ABAP Program? Any Function Module that can be used for this?

Hi
This is more of configuration
(1) Create a Output type with Medium 6 ( Check with your functional consultant)
(2) Maintain Partner Profiles using WE20 transaction
       Idoc type - INVOIC02
       Message type - INVOIC
       Process Code - SD09
Regards
Madhan D

How to run a ABAP Program in Batch JOB

How to run a ABAP Program in Batch JOB ?

Hello Manish,
Using transaction SM36 you can define the batch job along with the start conditions for that job.
1. Transaction SM36.
2. Give the Z name of the job in the 'Job Name' input field.
3. Click on 'Steps' button from the application toolbar.
4. On the 'Create Step 1' dialog box, give the name of the ABAP program in the 'ABAP Program' section' along with the variant.
5. Click on 'Check Input' button from the dialog box.
6. Click on 'Save' button from the dialog box once the check is successful.
7. One list will be shown. Click on Back button from the standard toolbar.
8. Click on 'Start Conditions' button from the application toolbar. Specify the start condition e.g. immediate. Click on save.
9. The job staus is now scheduled.
10.Click on Save button from the standard toolbar of SM36. The job status will be released.
Using SM37 you can monitor the status of the job.
This will sort out your problem.
PS If the answer solves your query, plz reward points.
Regards

How to Delete an ABAP Program?

Hi
How to delete an ABAP program that is in the SAP Production Server using a Transport Request. Why I am asking this is I want to maintain consistency between the Production & Development Box and I dont want to open the Production Box just to delete the ABAP Program. Once the ABAP Program in the Development Box is Deleted a Transport Request should be made when Transported to the Production it should delete the ABAP program in the Production Box.
Thanks,
Kishan

Ofcourse this is possible and Kishan is on the right path. In the request , in the objects list you will see a column "Function". This will be set to "D" ( delete ) when you delete a program. With the help of this field only the transport system knows what to do in the target system . This field is set automatically with correct value when you delete or change an object . Do an F1 help on this field for more details on other values.
Cheers.

How to get the all process orders and outbound deliveries based on material

Hi Team ,
I need one help from you regarding the MB 56 transaction.
My doubt is : How to get the all process orders and outbound deliveries based on material, plant and batch?
Please help me regarding this.
Thanks & Regards,
Srikanth.

Hi,
You can use ST05,to trace the program and find out,
hope it will help you...
thanks and regards,
veera.

How to call the Standard Program in our ZPROGRAM?

Hi Frieds can you tell me the procedure how to call the Standard program
in z----
program and we have to get the data from standard one to our customer program.
Thanks in advance,
madan mohan.

Hi,
*Submit report but export resultant list to memory, rather than
*it being displayed on screen
SUBMIT zreport EXPORTING LIST TO MEMORY.
Once report has finished and control has returned to calling
program, use function modules LIST_FROM_MEMORY, WRITE_LIST and
DISPLAY_LIST to retrieve and display report.
*Example Code (Retrieving list from memory)
DATA BEGIN OF itab_list OCCURS 0.
        INCLUDE STRUCTURE abaplist.
DATA END OF itab_list.
DATA: BEGIN OF vlist OCCURS 0,
        filler1(01)   TYPE c,
        field1(06)    TYPE c,
        filler(08)    TYPE c,
        field2(10)    TYPE c,
        filler3(01)   TYPE c,
        field3(10)    TYPE c,
        filler4(01)   TYPE c,
        field4(3)     TYPE c,
        filler5(02)   TYPE c,
        field5(15)    TYPE c,
        filler6(02)   TYPE c,
        field6(30)    TYPE c,
        filler7(43)   TYPE c,
        field7(10)    TYPE c,
      END OF vlist.
SUBMIT zreport EXPORTING LIST TO MEMORY.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject = itab_list
EXCEPTIONS
    not_found = 4
    OTHERS     = 8.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
    list_index         = -1
TABLES
    listasci           = vlist
    listobject         = itab_list
EXCEPTIONS
    empty_list         = 1
    list_index_invalid = 2
    OTHERS             = 3.
IF sy-subrc NE '0'.
WRITE:/ 'LIST_TO_ASCI error !! ', sy-subrc.
ENDIF.
Regards
Sudheer

How to trigger an ABAP program in a Process chain

Hello Forum,
1. In a process chain, if a program fails, how can we re-run it?
2. If the process preceeding the ABAP program fails, how can we start the program?
3. If an Infospoke fails in a process chain, how can we trigger that?
Thank you,
Its my pleasure to assign points,
raj

Hi,
1. U have to first check whats the reason for the failure. check in the monitor screen details button, the error message will be displayed, check the error, correct it. and to proceed with further right click on the subsequent process use Repeat option , the loads will get continue.
2. same here, if it fails check the reason, sometimes if two parallel process trying to access the same program Lock may occur, stop one process, once its done start the second process, use the transaction code SA38>select ur ABAP program, the corresponding variant->this is for running the ABAP program in the backgroud..if u want to run direct means Select the Process types Under the general services u find an ABAP program
3. same here too u should find the reason why it fails, and rectify the error, and use the repaet option to proceed with further.

How to I insert ABAP Programs in Process Chain ?

Hi mates,
I need to know how exactly in a Process Chain can I start a ABAP Program ?
For Instance, if X happens the go and execute this program it not execute Y program ?
Kindly advice

Hi,
Yes you can definitely insert an ABAP program process in a PC.
You can include a ABAP Process which is available in the Processes under PC. And it asks for a Variant and ABAP report name.
You need to create a Variant for the ABAP program.
This will also have a Output, like if in case the variants are correct and the Program logic is matched then in that case the output is given else not given. Which turns the process GREEN / RED accordingly.
Hope this helps,
Pradip Parmar

How to list the contents of an OSX directory, and output to text file?

hello there any hints with any known program that does following
I have recorded my music directory to DVD and now i would like to make an .txt file what the dvd contains...cos its way of hand to write all 100xx files by hand...
How to list the contents of an OSX directory, and output to text file?
any prog that does that? any hints?
best regards

This script makes a hierarchical file listing all files in a folder and subfolder:
Click here to launch Script Editor.
choose folder with prompt "Choose a folder to process..." returning theFolder
set theName to name of (info for theFolder)
set thepath to quoted form of POSIX path of theFolder
set currentIndex to theFolder as string
do shell script "ls -R " & thepath returning theDir
set theDirList to every paragraph of theDir
set newList to {"Contents of folder \"" & theName & "\"" & return & thepath & return & return}
set theFilePrefix to ""
repeat with i from 1 to count of theDirList
set theLine to item i of theDirList
set my text item delimiters to "/"
set theMarker to count of text items of thepath
set theCount to count of text items of theLine
set currentFolder to text item -1 of theLine
set theFolderPrefix to ""
if theCount is greater than theMarker then
set theNestIndex to theCount - theMarker
set theTally to -1
set theFilePrefix to ""
set theSuffix to ""
repeat theNestIndex times
set theFolderPrefix to theFolderPrefix & tab
set theFilePrefix to theFilePrefix & tab
if theTally is -1 then
set theSuffix to text item theTally of theLine & theSuffix
else
set theSuffix to text item theTally of theLine & ":" & theSuffix
end if
set currentIndex to "" & theFolder & theSuffix
set theTally to theTally - 1
end repeat
end if
set my text item delimiters to ""
if theLine is not "" then
if word 1 of theLine is "Volumes" then
set end of newList to theFolderPrefix & "Folder: > " & currentFolder & return
else
try
if not folder of (info for alias (currentIndex & theLine & ":")) then
set end of newList to theFilePrefix & tab & tab & tab & "> " & theLine & return
end if
end try
end if
end if
end repeat
open for access file ((path to desktop as string) & "Contents of folder- " & theName & ".txt") ¬
with write permission returning theFile
write (newList as string) to theFile
close access theFile

How to implement an abap program in a process chain

Hi,
I have an ABAP Program which uploads data into a table.
Now I want to implement this abap program in a process chain.
Please could anyone tell me how this can be done.
Thanks & Regards,
Sushanth H.S.

Hi,
A process chain is a background task for processing data into a BW instance .
I want to know how to integrate an abap program into the process chain.
Regards,
Sushanth H.S.

How AAE call the mapping program?

Hi Experts,
i almost have no experience on using AAE. after reading some documents i still have the below questions,
1. mapping program is happened in integration engine, while AAE is used for integrated scenarios without going into integration engine, then how to execute the mapping program?
2. till now all the work i have done is using the common scenario, then for which scenarios i can suggest my client that "we should use integrated scenario , and there is no 'side-effect' of using is instead."
3. in some documents "persistence" is discussed, can someone help me into more details?
thanks in advance. hope these could be explained.

> 1. mapping program is happened in integration engine, while AAE is used for integrated scenarios without going into integration engine, then how to execute the mapping program?
When you implement AAE,Adapter engine will execute your mapping program,that means AE has the capailities , they have copied moved routing ,mapping features in AE,so no need to interact with IE.
> 2. till now all the work i have done is using the common scenario, then for which scenarios i can suggest my client that "we should use integrated scenario , and there is no 'side-effect' of using is instead."
There is no side effects at all,but there are some limitations like in PI7.1 monitoring not possible,ABAP PRoxy,look ups will not supported and only supports AE adapters communication.
PI7.1 EHP1 some enhacements happend on the same
search in sdn.
> 3. in some documents "persistence" is discussed, can someone help me into more details?
can you explain bit more..
Regards,
Raj

How to call a abap program ?

Can anyone tell me how to call one abap program in another abap program ??

Hi,
You can use <b>submit</b> statement to achieve the same.
Sample Code
REPORT ZREP2 NO STANDARD PAGE HEADING.
tables: qals.
RANGES seltab for qals-prueflos.
WRITE: 'Select a Selection!',
SKIP.
FORMAT HOTSPOT COLOR 5 INVERSE ON.
WRITE: 'Selection 1',
/ 'Selection 2'.
AT LINE-SELECTION.
CASE SY-LILLI.
WHEN 4.
SUBMIT zrep1 VIA SELECTION-SCREEN
WITH PARAMET EQ 'Selection 1'
WITH SELECTO IN SELTAB
WITH SELECTO NE 3
AND RETURN.
WHEN 5.
SUBMIT zrep1 VIA SELECTION-SCREEN
WITH PARAMET EQ 'Selection 1'
AND RETURN.
ENDCASE.
Message was edited by: Jayanthi Jayaraman

How to list the abap programs order by updated date in ECD

Similar Messages

Maybe you are looking for