How to load jpegs from memory stick to ipad2
How do I load picture to my ipad2 using memory stick.
The memory stick format was Sony's attempt to control the portable storage market.
They failed miserably. Almost nobody supports or uses the memory stick format.
Transfer to a pc or to a decent memory card and use the camera connection kit.
Similar Messages
-
How to download photos from memory stick pro duo
I have an older Sony digital camera that uses a memory stick pro duo. I have the apple camera connection kit but my memory stick does not fit in it. What is the easiest way to download photos from it to my iPad?
You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
Cheers, Tom -
Transfer file from memory stick and add as Attachment to email
How to transfer file from memory stick to email attachment? I would like to send the whole folder. Plz help. tks!
I think you should use the winzip freeversion to zip the folder and attach the same to mail and send them to yr receipents.
http://www.winzip.com/mac/en/product_overview_mac.htm
regards -
How to load data from a ODS to CUBE Request ID - by - Request ID?
<i>How to load data from a ODS to CUBE Request ID - by - Request ID?</i>
The problem is that... some requests had been eliminated of the cube and the delta control between the ODS and CUBE was lost. The flag "<b>data mart status of request</b>" of all the requests of the ODS had been blank.
Now it is necessary to load some requests from the ODS for the cube.
Notes:
- it is not possible to make a complete load selecting the data to be loaded;
- the PSA is not being used;
- considering the data volume it is impracticable to reload the cube completely.
Thanks in advance,
Wesley.Dear R B,
Considering the following:
-> the delta control was lost;
-> the data already are active in the ODS;
-> part of the data of the ODS already is in the cube.
The indicated procedure it only guarantees the load of the data that are in the ODS and that are not in the cube.
Tks,
Wesley. -
How to load data from a flat file which is there in the application server
HI All,
how to load data from a flat file which is there in the application server..Hi,
Firstly you will need to place the file(s) in the AL11 path. Then in your infopackage in "Extraction" tab you need to select "Application Server" option. Then you need to specify the path as well as the exact file you want to load by using the browsing button.
If your file name keeps changing on a daily basis i.e. name_ddmmyyyy.csv, then in the Extraction tab you have the option to write an ABAP routine that generates the file name. Here you will need to append sy-datum to "name" and then append ".csv" to generate complete filename.
Please let me know if this is helpful or if you need any more inputs.
Thanks & Regards,
Nishant Tatkar. -
How to load images from css file in JavaFX 8
I have this css file which loads images in JavaFX 8 application:
#pill-left {
-fx-padding: 5;
-fx-border-image-source: url("/com/dx57dc/images/left-btn.png");
-fx-border-image-slice: 4 4 4 4 fill;
-fx-border-image-width: 4 4 4 4;
-fx-border-image-insets: 0;
-fx-border-image-repeat: stretch;
-fx-background-color: null !important;
#pill-left:selected { -fx-border-image-source: url("/com/dx57dc/images/left-btn-selected.png"); }
#pill-left .label {
-fx-text-fill: #d3d3d3;
-fx-effect: dropshadow( one-pass-box , rgba(0,0,0,0.75) , 0, 0.0 , 0 , -1 );
#pill-left:selected .label {
/* -fx-text-fill: black; */
-fx-text-fill: white;
-fx-effect: dropshadow( one-pass-box , white , 0, 0.0 , 0 , 1 );
#pill-center {
-fx-padding: 5;
-fx-border-image-source: url("/com/dx57dc/images/center-btn.png");
-fx-border-image-slice: 4 4 4 4 fill;
-fx-border-image-width: 4 4 4 4;
-fx-border-image-insets: 0;
-fx-border-image-repeat: stretch;
-fx-background-color: null !important;
#pill-center:selected { -fx-border-image-source: url("/com/dx57dc/images/center-btn-selected.png"); }
#pill-center .label {
-fx-text-fill: #d3d3d3;
-fx-effect: dropshadow( one-pass-box , rgba(0,0,0,0.75) , 0, 0.0 , 0 , -1 );
#pill-center:selected .label {
-fx-text-fill: black;
-fx-effect: dropshadow( one-pass-box , white , 0, 0.0 , 0 , 1 );
#pill-right {
-fx-padding: 5;
-fx-border-image-source: url("/com/dx57dc/images/right-btn.png");
-fx-border-image-slice: 4 4 4 4 fill;
-fx-border-image-width: 4 4 4 4;
-fx-border-image-insets: 0;
-fx-border-image-repeat: stretch;
-fx-background-color: null !important;
#pill-right:selected { -fx-border-image-source: url("/com/dx57dc/images/right-btn-selected.png"); }
#pill-right .label {
-fx-text-fill: #d3d3d3;
-fx-effect: dropshadow( one-pass-box , rgba(0,0,0,0.75) , 0, 0.0 , 0 , -1 );
#pill-right:selected .label {
-fx-text-fill: black;
-fx-effect: dropshadow( one-pass-box , white , 0, 0.0 , 0 , 1 );
The images are located at the Java package com.dx57dc.images
In Java 7_25 this code works as expected but in JavaFX 8 b99 I get this error:
ava.lang.NullPointerException
at com.sun.javafx.sg.prism.NGRegion.renderContent(NGRegion.java:1129)
at com.sun.javafx.sg.prism.NGNode.doRender(NGNode.java:1598)
at com.sun.javafx.sg.prism.NGNode.render(NGNode.java:1520)
at com.sun.javafx.sg.prism.NGGroup.renderChildren(NGGroup.java:233)
at com.sun.javafx.sg.prism.NGGroup.renderContent(NGGroup.java:199)
at com.sun.javafx.sg.prism.NGRegion.renderContent(NGRegion.java:1249)
at com.sun.javafx.sg.prism.NGNode.doRender(NGNode.java:1598)
at com.sun.javafx.sg.prism.NGNode.render(NGNode.java:1520)
at com.sun.javafx.sg.prism.NGGroup.renderChildren(NGGroup.java:233)
at com.sun.javafx.sg.prism.NGGroup.renderContent(NGGroup.java:199)
at com.sun.javafx.sg.prism.NGRegion.renderContent(NGRegion.java:1249)
at com.sun.javafx.sg.prism.NGNode.doRender(NGNode.java:1598)
at com.sun.javafx.sg.prism.NGNode.render(NGNode.java:1520)
at com.sun.javafx.tk.quantum.ViewPainter.doPaint(ViewPainter.java:99)
at com.sun.javafx.tk.quantum.AbstractPainter.paintImpl(AbstractPainter.java:210)
at com.sun.javafx.tk.quantum.PresentingPainter.run(PresentingPainter.java:95)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471)
at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:304)
at com.sun.javafx.tk.RenderJob.run(RenderJob.java:58)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at com.sun.javafx.tk.quantum.QuantumRenderer$PipelineRunnable.run(QuantumRenderer.java:129)
at java.lang.Thread.run(Thread.java:724)
D3D Vram Pool: 13,331,480 used (5.0%), 13,331,480 managed (5.0%), 268,435,456 total
20 total resources being managed
4 permanent resources (20.0%)
1 resources locked (5.0%)
7 resources contain interesting data (35.0%)
0 resources disappeared (0.0%)
D3D Vram Pool: 13,331,480 used (5.0%), 13,331,480 managed (5.0%), 268,435,456 total
20 total resources being managed
4 permanent resources (20.0%)
1 resources locked (5.0%)
7 resources contain interesting data (35.0%)
0 resources disappeared (0.0%)
D3D Vram Pool: 13,331,480 used (5.0%), 13,331,480 managed (5.0%), 268,435,456 total
20 total resources being managed
4 permanent resources (20.0%)
1 resources locked (5.0%)
7 resources contain interesting data (35.0%)
0 resources disappeared (0.0%)
What is the proper way to load images from css in Java 8?
Ref
How to load images from css file in JavaFX 8 - Stack OverflowThere is nothing special to do - you execute the statement from your program just like any other SQL statement. The only thing to be aware of are the privilege/permission issues:
When loading from a file on a client computer:
READ CLIENT FILE privilege is also required for the database user.
Read privileges are required on the directory being read from.
The allow_read_client_file database option must be enabled.
The read_client_file secure feature must be enabled.
Revoking these privileges is also the only way you can prevent a user from executing the statement. -
How to Load Hierarchies from flatfile in BI7
Hello Gurus,
How to load Hierarchies from flat file in BI7
As when creating datasource in BI7,
IT GIVES FOLLOWING OPTIONS
TRANSCTION DATA
MASTER DATA TEXTS
MASTER DATA ATTRIBUTES...
ALL THESE WE BRING TO PSA LEVEL BY INFOPACKAGE AND SEND DATATARGET BY DTP...
But how about Hierarchies...
Looking for reply
Regards
GuruLook at the below blog for step by step procedure :
Hierarchy Upload from Flat files
http://help.sap.com/saphelp_nw04/helpdata/en/fa/e92637c2cbf357e10000009b38f936/frameset.htm -
How to load software from a small sized CD on macbook pro?
How to load software from a small sized CD on MacBook Pro?
Welcome to Apple Support Communities
The disc drive of the MacBook Pro does not support mini CDs, so you need to get an external DVD drive that supports mini CDs. After connecting it, insert the mini CD and install the application you want.
If you have got another PC with a DVD drive, you can use Remote Disc > http://support.apple.com/kb/HT5287?viewlocale=en_US&locale=en_US -
Step by Step details on how to load data from a flat file
hi can anyone explain how to load data from a flat file. Pls giv me step by step details. thnx
hi sonam.
it is very easy to load data from flat file. whn compared with other extrations methods...
here r the step to load transation data from a flat file.......
step:1 create a Flat File.
step:2 log on to sap bw (t.code : rsa1 or rsa13).
and observe the flat file source system icon. i.e pc icon.
step:3 create required info objects.
3.1: create infoarea
(infoObjects Under Modeling > infoObjects (root node)-> context menu -
> create infoarea).
3.2: create char /keyfig infoObject Catalog.(select infoArea ---.context menu --->create infoObject catalog).
3.3: create char.. infoObj and keyFig infoObjects accourding to ur requirement and activate them.
step:4 create infoSource for transaction data and create transfer structure and maintain communication structure...
4.1: first create a application component.(select InfoSources Under modeling-->infosources<root node>>context menu-->create applic...component)
4.2: create infoSource for transation data(select appl..comp--.context menu-->create infosource)
>select O flexible update and give info source name..
>continue..
4.4: *IMp* ASSIGN DATASOURCE..
(EXPAND APPLIC ..COMP..>EXPAND YOUR INFOSOURCE>CONTEXT MENU>ASSIGN DATASOURCE.)
>* DATASOURCE *
>O SOURCE SYSTEM: <BROWSE AND CHOOSE YOUR FLAT FILE SOURCE SYSTEM>.(EX:PC ICON).
>CONTINUE.
4.5: DEFINE DATASOURCE/TRANSFER STRUCTURE FOR IN FOSOURCE..
> SELECT TRANSFER STRUCTURE TAB.
>FILL THE INFOOBJECT FILLED WITH THE NECESSARY INFOOBJ IN THE ORDER OR SEQUENCE OF FLAT FILE STRUCTURE.
4.6: ASSIGN TRANSFER RULES.
---> NOW SELECT TRANSFER RULES TAB. AND SELECT PROPOSE TRANSFER RULES SPINDLE LIKE ICON.
(IF DATA TARGET IS ODS -
INCLUDE 0RECORDMODE IN COMMUNICATION STRUCTURE.)
--->ACTIVATE...
STEP:5 CREATE DATATARGET.(INFOCUBE/ODS OBJECT).
5.1: CREATE INFO CUBE.
-->SELECT YOUR INFOAREA>CONTEXT MENU>CREATE INFOCUBE.
5.2: CREATE INFOCUBE STRUCTURE.
---> FILL THE STRUCTURE PANE WILL REQUIRE INFOOBJECTS...(SELECT INFOSOURCE ICON>FIND UR INFOSOURCE >DOUBLE CLICK > SELECT "YES" FOR INFOOBJECT ASSIGNMENT ).
>MAINTAIN ATLEAST ON TIME CHAR.......(EX; 0CALDAY).
5.3:DEFINE AND ASSIGN DIMENSIONS FOR YOUR CHARACTERISTICS..
>ACTIVATE..
STEP:6 CREATE UPDATE RULES FOR INFOCUDE USING INFOSOURCE .
>SELECT UR INFOCUBE >CONTEXT MENU> CREATE UPDATE RULES.
> DATASOURCE
> O INFOSOURCE : _________(U R INFOSOURCE). AND PRESS ENTER KEY.......
>ACTIVATE.....UR UPDATE RULES....
>>>>SEE THE DATA FLOW <<<<<<<<----
STEP:7 SCHEDULE / LOAD DATA..
7.1 CREATE INFOPACKAGE.
--->SELECT INFOSOURCE UNDER MODELING> EXPAND UR APPLIC.. COMP..> EXPAND UR INFOSOURCE..> SELECT UR DATASOURCE ASSIGN MENT ICON....>CONTEXT MENU> CREAE INFOPACKAGE..
>GIVE INFOPACKAGE DISCREPTION............_________
>SELECT YOUR DATA SOURCE.-------> AND PRESS CONTINUE .....
>SELECT EXTERNAL DATA TAB...
> SELECT *CLIENT WORKSTATION oR APPLI SERVER >GIVE FILE NAME > FILE TYPE> DATA SAPARATER>
>SELECT PROCESSING TAB
> PSA AND THEN INTO DATATARGETS....
>DATATARGET TAB.
>O SELECT DATA TARGETS
[ ] UPDATE DATATARGET CHECK BOX.....
--->UPDATE TAB.
O FULL UPDATE...
>SCHEDULE TAB..
>SELECT O START DATA LOAD IMMEDIATELY...
AND SELECT "START" BUTTON........
>>>>>>>>>>
STEP:8 MONITOR DATA
> CHECK DATA IN PSA
CHECK DATA IN DATA TARGETS.....
>>>>>>>>>>> <<<<<<<<<----
I HOPE THIS LL HELP YOU..... -
I need how to load data from MS Excel(csv format) to NW Excel
Hi,
I am doing Migration project from SAP MS to NW Manually.
I need how to load data from MS excel (csv format) to NW excel .
For example 2008 budget data.
Could you please help me in this.
Thanks and Regards
KrishnaHi,
You need to create a transformation file and a conversion file if required. First upload the excel (csv) file into BPC using Manage Data and Upload File option.
Create the transformation file (refer to the sap help on how to define a transformation file). You need to specify the mapping correctly and include all your application dimensions and map them to appropriate columns of the flat file.
Before running the import package, do validate the data in the flat file you uploaded into BPC with the transformation file you created.
Thanks,
Sreeni -
Help - Step by Step Material on How to load Data from flatfile to BI 7.0
Hi BI Experts,
Can any one send the document or a pdf file on how to load data from flat file to BI 7.0 in step by step process.
Thanks in Advance
Regards
Ramakrishna Kamurthy
+91-99631010731. On log on you will be placed in the SAP Easy Access Strategic Management/ Business Analytics
1. You see the screen divided in two segments.
2. Follow the left segment.
3. Click on the Business Information Warehouse.
4. Sub Menu  BW Administration.
5. You find various entries in it.
6. Now double click on UG_BW_RSA1-Administrator Workbench
2. Creation of Info Area
1. Click on InfoObjects.
2. Now in the right hand side screen select the InfoObjects (First item on the top). Right click the mouse and select Create InfoArea.
3. A dialog box pops up.
4. Give the InfoArea as ZIVY_Iarea.
5. Give the Long Description as ZIVY Info Area.
3. Create a Catalog:
1. Select the InfoArea just created ZIVY_Iarea.
2. Right click the mouse pointer and select the option Create InfoObject Catalog
3. A dialog box pops up.
4. Give the InfoObjCat = ZIVY_CHCAT
i. Description = ZIVY Character Catalog
ii. InfoObjectType: Check the Character. ( As we are creating the master data, check the Character)
iii. Now at the bottom of this dialog box you see an icon called CREATE. Click this icon.
1.
1. The next screen in front of you is the Edit InfoObject Catalog.
2. Simply click the activate icon present on the Application Toolbar.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CUST and
i. Description Customer Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CUST: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP .
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_CUST, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_CITY
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CITY and
i.
Description
Customer
City Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CITY: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 25
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CITY, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_STATE
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_STATE and
i.
Description
Customer
State Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_STATE: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 25
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_STATE, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_CTRY
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CTRY and
i. Description Customer Country Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CTRY: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data
2. Check the With Texts and make suitable Text Table Properties.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CTRY, by clicking the icon ACTIVATE.
1. Creation of Attributes and InfoObject from the ZIVY_CUST InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_CUST. Double click the InfoObject ZIVY_CUST.
6. You find the screen Change Characteristic ZIVY_CUST:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_CITY and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Similarly, type ZIVY_STATE, ZIVY_CTRY.
11. Now, we will create another InfoObject ZIVY_TEL, from here.
12. So type ZIVY_Tel and enter the ENTER KEY.
13. A dialog box pops up, and request you If you want to Create an InfoObject
14. Select Create Attribute As Characteristic and click the check mark.
15. Another window pops up. Give the following:
i. In the General Tab:
1. Long Description: ZIVY Telephone Number
2. Short Description: ZIVY Telephone Number
3. DataType : NUMC
4. Length : 10
5. Uncheck Attribute Only
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies
iv. Now click the TICK MARK
1.
1. Click the ACTIVATE
2. A window pops up.
i. Select activate dependent InfoObjects.
ii. Click the Check Mark.
1. Creation of InfoObject: ZIVY_DATE
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_DATE and
i. Description ZIVY Date.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_DATE: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: DATS
2. Length: 8
ii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CTRY, by clicking the icon ACTIVATE.
2. Create ZIVY Application Component:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Right click the mouse pointer and select the entry Create Application Component
5. A window pops up.
i. Application Component: ZIVY_APPCOMP
ii. Long Description : ZIVY Application Component
iii. Click the check mark.
1. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_CUST
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the Customer Info Object.
2. Select the Customer Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_CUST
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_CUST,
3. Second field is ZIVY_CITY.
4. And so on.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_CUST MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_CUST,
4. Third field is 0TXTMD.
5. Click the Transfer Rule adjacent to 0LANGUAGE
6. A window pops up.
a. Check the CONSTANT and give the value as EN
b. Click the TICK MARK.
7. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_CUST_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_CUST_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_CUST alias Customer Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_CUST_ATTR.
ii. Select ZIVY_CUST_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_CUST_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_CUST alias Customer Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_CUST_TEXT.
ii. Select ZIVY_CUST_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_CUST_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_MAT and
i. Description ZIVY Material Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_MAT: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP 17).
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_MAT, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_GROUP
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_GROUP and
i. Description ZIVY Material Group.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_GROUP: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data
2. Check the With Texts and make suitable Text Table Properties.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_GROUP, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_COLOR
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_COLOR and
i. Description ZIVY Material Color.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_COLOR: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_COLOR, by clicking the icon ACTIVATE.
2. Creation of InfoObject from the ZIVY_MAT InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_MAT. Double click the InfoObject ZIVY_MAT.
6. You find the screen Change Characteristic ZIVY_MAT:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_GROUP and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Similarly, type ZIVY_COLOR.
11. Click the ACTIVATE
3. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_MAT
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the ZIVY Material Info Object.
2. Select the ZIVY Material Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_MAT
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_MAT,
3. Second field is ZIVY_GROUP.
4. Third field is ZIVY_COLOR.
5. Check the mapping. If you dont see the mapping.
6. Click on the empty row in the group Assign InfoObjectField, the box to the right.
7. Type ZIVY_GROUP, ZIVY_COLOR.
8. Check the transfer rules.
9. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_CUST MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_MAT,
4. Third field is 0TXTSH.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_Material_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_Material_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_MAT alias ZIVY Material Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_MAT_ATTR.
ii. Select ZIVY_MAT_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_Material_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_MAT alias ZIVY Material Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_MAT_TEXT.
ii. Select ZIVY_MAT_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_MATERIAL_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_SPER and
i. Description ZIVY Sales Person Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_SPER: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 20
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP 24).
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_SPER, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_SREG
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_SREG and
i. Description ZIVY Sales Region.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_SREG: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 20
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_SREG, by clicking the icon ACTIVATE.
2. Creation of Attributes from the ZIVY_SPER InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_SPER. Double click the InfoObject ZIVY_SPER.
6. You find the screen Change Characteristic ZIVY_SPER:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_SREG and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Click the ACTIVATE
3. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_SPER
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the ZIVY Sales Person Info Object.
2. Select the ZIVY Sales Person Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_SREP
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_SPER,
3. Second field is ZIVY_SREG.
4. Check the mapping. If you dont see the mapping.
5. Click on the empty row in the group Assign InfoObjectField, the box to the right.
6. Check the transfer rules.
7. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_SREP MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_SPER,
4. Third field is 0TXTSH.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_SREP_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_SREP_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_SPER alias ZIVY Sales Person Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_SPER_ATTR.
ii. Select ZIVY_SPER_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_SPER_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_SPER alias ZIVY Sales Person Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_SPER_TEXT.
ii. Select ZIVY_SPER_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_SPER_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii.
Browse the data.
1. Creation of InfoObject Catalog with Key Figures:
1. Select the InfoArea just created ZIVY_Iarea.
2. Right click the mouse pointer and select the option Create InfoObject Catalog
3. A dialog box pops up.
4. Give the InfoObjCat = ZIVY_KEYCAT
i. Description = ZIVY Key Figures Catalog
ii. InfoObjectType: Check the Key Figures.
iii. Now at the bottom of this dialog box you see an icon called CREATE. Click this icon.
1.
1. The next screen in front of you is the Edit InfoObject Catalog.
2. Simply click the activate icon present on the Application Toolbar.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_KEYCAT,which is ZIVY Key Figures Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_AMT and
i. Description ZIVY Amount Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Create Key Figure ZIVY_AMT: Detail.
2. In this screen the following fields have to be modified:
i. In the Type/ Unit Tab
1. DataType: Amount
2. Unit/ Currency = 0Currency
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_AMT, by clicking the icon ACTIVATE.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. -
How to load data from Quikbooks into PeopleSoft General Ledger module ?
Folks,
Hello.
My client's data is currently stored in Quikbooks.
After install PeopleSoft FSCM 9.0, I need to load the data from Quickbooks into PeopleSoft General Ledger module. But I don't know how to use PeopleSoft Integration Broker to integrate with Quikbooks.
Can any folks tell me how to load data from Quikbooks into PeopleSoft General Ledger module ?Hi,
If the data load is one time process, then you can use PL/SQL or datamover to load the data to PeopleSoft application.
If you want to load the data in real time, then you need to create In-bound and out-bound nodes to perform the transaction.
Thanks
Soundappan -
How to discard blocks from memory ?
Hi,
How to discard blocks from memory ?
Thank you.To add to what has already been posted. The full Oracle version should be included on all posts since many features and most bugs are version dependend.
Oracle will flush dirty blocks from the buffer cache and overlay unchanged blocks as needed to fit new requests to the buffer cache. It also reuses space in the shared pool so the question of which blocks you want to flush from memory and why can be important to getting the most appropriate answer to your questions.
On a production instance it should be unnecessary to manually flush either the buffer cache or shared pool as a normal part of opertations.
HTH -- Mark D Powell -- -
How to transfer files from USB stick
How can you transfer files from USB stick to ipad2?
Buy a portable wi-fi router with file sharing such as MOCREO 5-in-1 Portable WiFi (not personaly vouching for this one it just happens to be the one I have and it cost less than the apple connection cables).
Plug your USB stick into the router
Connect your phone via wi-fi to the router.
Log into the routers built in file managment or use any FTP capable app to connect (GoodReader, ifiles, etc)
Transfer files. -
Load PDF From Memory using Adobe Acrobat SDK
Load PDF From Memory using Adobe Acrobat SDK
//The below variables are global;
DWORD FileSize;//size of main PDF file
char * lpBuffer;//PDF buffer,please save binary PDF data into this buffer
DWORD dwDataSize;//size of main PDF file
DWORD dwDataIndex;//is a pointer for lpBuffer position.ex. lpBuffer[dwDataIndex]
//write the following code in the initialzation of your application
ASFileSys myFileSys;
memset (&MyFileSys, 0, sizeof(ASFileSysRec));
MyFileSys.size = sizeof(ASFileSysRec);
MyFileSys.open = ASCallbackCreateProto (ASFileSysOpenProc, MyASFileSysOpenProc);
MyFileSys.close = ASCallbackCreateProto (ASFileSysCloseProc, MyASFileSysCloseProc);
MyFileSys.flush = ASCallbackCreateProto (ASFileSysFlushProc, MyASFileSysFlushProc);
MyFileSys.setpos = ASCallbackCreateProto (ASFileSysSetPosProc, MyASFileSysSetPosProc);
MyFileSys.getpos = ASCallbackCreateProto (ASFileSysGetPosProc, MyASFileSysGetPosProc);
MyFileSys.seteof = ASCallbackCreateProto (ASFileSysSetEofProc, MyASFileSysSetEofProc);
MyFileSys.geteof = ASCallbackCreateProto (ASFileSysGetEofProc, MyASFileSysGetEofProc);
MyFileSys.read = ASCallbackCreateProto (ASFileSysReadProc, MyASFileSysReadProc);
MyFileSys.write = ASCallbackCreateProto (ASFileSysWriteProc, MyASFileSysWriteProc);
MyFileSys.remove = ASCallbackCreateProto (ASFileSysRemoveProc, MyASFileSysRemoveProc);
MyFileSys.rename = ASCallbackCreateProto (ASFileSysRenameProc, MyASFileSysRenameProc);
MyFileSys.isSameFile = ASCallbackCreateProto (ASFileSysIsSameFileProc, MyASFileSysIsSameFileProc);
MyFileSys.getName = ASCallbackCreateProto (ASFileSysGetNameProc, MyASFileSysGetNameProc);
MyFileSys.getNameAsASText = ASCallbackCreateProto (ASFileSysGetNameAsASTextProc, MyASFileSysGetNameAsASTextProc);
MyFileSys.getTempPathName = ASCallbackCreateProto (ASFileSysGetTempPathNameProc, MyASFileSysGetTempPathNameProc);
MyFileSys.copyPathName = ASCallbackCreateProto (ASFileSysCopyPathNameProc, MyASFileSysCopyPathNameProc);
MyFileSys.diPathFromPath = ASCallbackCreateProto (ASFileSysDiPathFromPathProc, MyASFileSysDiPathFromPathProc);
MyFileSys.pathFromDIPath = ASCallbackCreateProto (ASFileSysPathFromDIPathProc, MyASFileSysPathFromDIPathProc);
MyFileSys.disposePathName = ASCallbackCreateProto (ASFileSysDisposePathNameProc, MyASFileSysDisposePathNameProc);
MyFileSys.getFileSysName = ASCallbackCreateProto (ASFileSysGetFileSysNameProc, MyASFileSysGetFileSysNameProc);
MyFileSys.getStorageFreeSpace = ASCallbackCreateProto (ASFileSysGetStorageFreeSpaceProc, MyASFileSysGetStorageFreeSpaceProc);
MyFileSys.flushVolume = ASCallbackCreateProto (ASFileSysFlushVolumeProc, MyASFileSysFlushVolumeProc);
MyFileSys.createPathName = ASCallbackCreateProto (ASFileSysCreatePathNameProc, MyASFileSysCreatePathNameProc);
MyFileSys.getItemProps = ASCallbackCreateProto (ASFileSysGetItemPropsProc, MyASFileSysGetItemPropsProc);
MyFileSys.firstFolderItem = ASCallbackCreateProto (ASFileSysFirstFolderItemProc, MyASFileSysFirstFolderItemProc);
MyFileSys.nextFolderItem = ASCallbackCreateProto (ASFileSysNextFolderItemProc, MyASFileSysNextFolderItemProc);
MyFileSys.destroyFolderIterator = ASCallbackCreateProto (ASFileSysDestroyFolderIteratorProc, MyASFileSysDestroyFolderIteratorProc);
MyFileSys.urlFromPath = ASCallbackCreateProto (ASFileSysURLFromPathProc, MyASFileSysURLFromPathProc);
MyFileSys.getParent = ASCallbackCreateProto (ASFileSysGetParentProc, MyASFileSysGetParentProc);
MyFileSys.createFolder = ASCallbackCreateProto (ASFileSysCreateFolderProc, MyASFileSysCreateFolderProc);
MyFileSys.removeFolder = ASCallbackCreateProto (ASFileSysRemoveFolderProc, MyASFileSysRemoveFolderProc);
MyFileSys.displayStringFromPath = ASCallbackCreateProto (ASFileSysDisplayStringFromPathProc, MyASFileSysDisplayStringFromPathProc);
MyFileSys.setTypeAndCreator = ASCallbackCreateProto (ASFileSysSetTypeAndCreatorProc, MyASFileSysSetTypeAndCreatorProc);
MyFileSys.getTypeAndCreator = ASCallbackCreateProto (ASFileSysGetTypeAndCreatorProc, MyASFileSysGetTypeAndCreatorProc);
//These need to be implemented for 7.0 Windows
MyFileSys.acquirePlatformPath = ASCallbackCreateProto (ASFileSysAcquirePlatformPathProc, MyASFileSysAcquirePlatformPathProc);
MyFileSys.releasePlatformPath = ASCallbackCreateProto (ASFileSysReleasePlatformPathProc, MyASFileSysReleasePlatformPathProc);
//MYFileSys Callbacks Functions definations
static ACCB1 ASInt32 ACCB2 MyASFileSysOpenProc (ASPathName pathName, ASUns16 mode, MDFile *fP)
dwDataIndex = 0;
dwDataSize = FileSize;//size of main PDF file
return 0;
static ACCB1 ASInt32 ACCB2 MyASFileSysCloseProc (MDFile f)
dwDataIndex = 0;//set PDF buffer pointer to zero
return 0;
static ACCB1 ASInt32 ACCB2 MyASFileSysFlushProc (MDFile f)
return 0;
static ACCB1 ASInt32 ACCB2 MyASFileSysSetPosProc (MDFile f, ASUns32 pos)
dwDataIndex = (DWORD)pos;
return 0;
static ACCB1 ASInt32 ACCB2 MyASFileSysGetPosProc (MDFile f, ASUns32 *pos)
*pos = (ASFilePos)dwDataIndex;
return 0;
static ACCB1 ASInt32 ACCB2 MyASFileSysSetEofProc (MDFile f, ASUns32 pos)
return 0;
static ACCB1 ASInt32 ACCB2 MyASFileSysGetEofProc (MDFile f, ASUns32 *pos)
*pos = (ASFilePos)dwDataSize;
return 0;
static ACCB1 ASSize_t ACCB2 MyASFileSysReadProc (void *ptr, ASSize_t size, ASSize_t count, MDFile f, ASInt32 *pError)
*pError = 0;
if ( ptr == NULL )
return 0;
DWORD dwRemaining = dwDataSize - dwDataIndex;
DWORD dwReadSize = min( dwRemaining, (DWORD)( size * count ) );
CopyMemory(ptr, &lpBuffer[ dwDataIndex ], dwReadSize );
dwDataIndex += dwReadSize;
return (ASSize_t)dwReadSize;
static ACCB1 ASSize_t ACCB2 MyASFileSysWriteProc (void *ptr, ASSize_t size, ASSize_t count, MDFile f, ASInt32 *pError)
return 0;
static ACCB1 ASInt32 ACCB2 MyASFileSysRemoveProc (ASPathName pathName)
return 0;
static ACCB1 ASInt32 ACCB2 MyASFileSysRenameProc (ASMDFile* f, ASPathName oldPath, ASPathName newPath)
return 0;
static ACCB1 ASBool ACCB2 MyASFileSysIsSameFileProc (ASMDFile f, ASPathName pathName, ASPathName newPathName)
return 0;
static ACCB1 ASInt32 ACCB2 MyASFileSysGetNameProc (ASPathName pathName, char *name, ASInt32 maxLength)
return 0;
static ACCB1 ASInt32 ACCB2 MyASFileSysGetNameAsASTextProc (ASPathName pathName, ASText name)
return 0;
static ACCB1 ASPathName ACCB2 MyASFileSysGetTempPathNameProc (ASPathName pathName)
return (ASPathName)PDF_MEMORY_FILESYS;
static ACCB1 ASPathName ACCB2 MyASFileSysCopyPathNameProc (ASPathName pathName)
return (ASPathName)PDF_MEMORY_FILESYS;
static ACCB1 char * ACCB2 MyASFileSysDiPathFromPathProc (ASPathName path, ASPathName relativeToThisPath)
return NULL;
static ACCB1 ASPathName ACCB2 MyASFileSysPathFromDIPathProc (const char * diPath, ASPathName relativeToThisPath)
return (ASPathName)PDF_MEMORY_FILESYS;
static ACCB1 void ACCB2 MyASFileSysDisposePathNameProc (ASPathName pathName)
static ACCB1 ASAtom ACCB2 MyASFileSysGetFileSysNameProc (void)
return NULL;
static ACCB1 ASUns32 ACCB2 MyASFileSysGetStorageFreeSpaceProc (ASPathName pathName)
return INT_MAX;
static ACCB1 ASInt32 ACCB2 MyASFileSysFlushVolumeProc (ASPathName pathName)
return 0;
static ACCB1 ASPathName ACCB2 MyASFileSysCreatePathNameProc (ASAtom pathSpecType, const void *pathSpec, const void *mustBeZero)
return (ASPathName)PDF_MEMORY_FILESYS;
static ACCB1 ASInt32 ACCB2 MyASFileSysGetItemPropsProc (ASPathName pathName, ASFileSysItemProps props)
return 0;
static ACCB1 ASFolderIterator ACCB2 MyASFileSysFirstFolderItemProc (ASPathName folderPath, ASFileSysItemProps props, ASPathName *itemPath)
return NULL;
static ACCB1 ASBool ACCB2 MyASFileSysNextFolderItemProc (ASFolderIterator folderIter, ASFileSysItemProps props, ASPathName *itemPath)
return 0;
static ACCB1 void ACCB2 MyASFileSysDestroyFolderIteratorProc (ASFolderIterator folderIter)
static ACCB1 char * ACCB2 MyASFileSysURLFromPathProc (ASPathName path)
return NULL;
static ACCB1 ASPathName ACCB2 MyASFileSysGetParentProc (ASPathName path)
return NULL;
static ACCB1 ASInt32 ACCB2 MyASFileSysCreateFolderProc (ASPathName path)
return 0;
static ACCB1 ASInt32 ACCB2 MyASFileSysRemoveFolderProc (ASPathName path)
return 0;
static ACCB1 char * ACCB2 MyASFileSysDisplayStringFromPathProc (ASPathName path)
return NULL;
static ACCB1 void ACCB2 MyASFileSysSetTypeAndCreatorProc (ASPathName path, unsigned long type, unsigned long creator)
static ACCB1 void ACCB2 MyASFileSysGetTypeAndCreatorProc (ASPathName path, unsigned long *type, unsigned long *creator)
static ACCB1 ASInt32 ACCB2 MyASFileSysAcquirePlatformPathProc(ASPathName path, ASAtom platformPathType, ASPlatformPath *platformPath)
return 0;
static ACCB1 void ACCB2 MyASFileSysReleasePlatformPathProc(ASPlatformPath platformPath)
//write the following code in your open PDF file procedure
FileSize = //size of your PDF File;
lpBuffer = (char *)malloc(FileSize);
PDDoc pdDoc = PDDocOpen( (ASPathName)PDF_MEMORY_FILESYS, &MyFileSys, NULL, true );
ASFile asFile = PDDocGetFile(pdDoc);
ASText title = ASTextFromScriptText ("PDF File Name",kASRomanScript);
AVDoc targetDoc = AVDocOpenFromASFileWithParams (asFile, title, NULL);
//Thanks
Maybe you are looking for
-
IM DESPERATE!!! ANYTHING i will rate as helpful. just please help me.
Hello. CAn anyone pleaase help me!!?I had my ipod video for a while now. I never really had trouble with it. Today..I was downloading some new music to it. I click on my ipod from the source menu and i looked at all the songs that I have on it. SO fa
-
Compression with zero elimination (reverse postings)
I executed a compression with zero elimination in a custom InfoCube in order to avoid entries that only contain zero values as key figures (for example reverse posting) are contained in the InfoCube after compressing. However, not all the entries whe
-
I use a JComboBox implementation as a cell in a JTable. The CombBox is editable . This is what I get when I try to type in something. java.awt.IllegalComponentStateException: component must be showing on the screen to determine its location at java.a
-
Video on Exported Movie Freezes During Playback, Audio Continues
This is a reoccurring problem I've found in some of my exported movies. After successfully exporting a project (in full quality), I view the movie in QuickTime player, where, somewhere in the middle of the movie the visual freezes and stays frozen on
-
Delivery from Planning when not using networks
Hi Gurus, Could anybody please help me with the following. We are using Easy Cost Planning to plan all costs against projects. We are also not using networks and activities for our projetcs. Is it possible to do delivery from projects (CNS0), without