How to load text data into internal table

I have a text file to load txt data into internal table. So how to read text data with validation and to load all text data into the internal table?
Say this is the text file:
IO_NAME, IO_TYPE, IO_SHTXT, IO_LONGTEXT, DATATYPE, DATA LENGTH
ZIO_TEST1, CHA,      IO TEST1,      IO TEST 1,        CHAR,         20
ZIO_TEST2, CHA,      IO TEST2,      IO TEST 2,        CHAR,         20
Regards,
Mau

Hi,
U can use GUI_UPLOAD for this...
Declare an internal table like
data: begin of itab occurs 0,
string(1200),
end of itab.
check the sample code:
cange as you need
DATA: DATEI_PC TYPE STRING VALUE 'C:\MATNR.TXT'.
DATA: BEGIN OF ITAB occurs 0,
TXT(1024),
END OF ITAB.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_UPLOAD
EXPORTING
FILENAME = DATEI_PC
FILETYPE = 'ASC'
CHANGING
DATA_TAB = ITAB[]
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
NOT_SUPPORTED_BY_GUI = 17
ERROR_NO_GUI = 18
OTHERS = 19.
IF SY-SUBRC NE 0. WRITE: / 'Error in Uploading'. STOP. ENDIF.
WRITE: / 'UPLOAD:'.
LOOP AT ITAB. WRITE: / ITAB-TXT. ENDLOOP.

Similar Messages

  • Loading Text data into internal table

    I have a text file to load txt data into internal table. So how to read text data with validation and to load all text data into the internal table?
    Say this is the text file:
    IO_NAME, IO_TYPE, IO_SHTXT, IO_LONGTEXT, DATATYPE, DATA LENGTH
    ZIO_TEST1, CHA, IO TEST1, IO TEST 1, CHAR, 20
    ZIO_TEST2, CHA, IO TEST2, IO TEST 2, CHAR, 20
    Regards,
    Mau

    hi Mau,
    look this code, maybe it's help u.
    <b>REPORT  ZTXTTOTABLE.</b>
    DATA: p_file   TYPE string value 'C:\teste.txt',
          BEGIN OF TI_table OCCURS 0,
            COD(5) TYPE C,
            NAME(40),
          END OF TI_table,
          a(2).
    PARAMETERS: sel_file(128) TYPE c
                default 'C:\teste.txt' OBLIGATORY LOWER CASE.
    p_file = sel_file.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename = p_file
      TABLES
        data_tab = ti_table[].
    format color COL_TOTAL INTENSIFIED ON.
    loop at ti_table.
      write: / sy-vline, ti_table-cod, at 10 sy-vline, ti_table-name,
             at 60 sy-vline.
    endloop.
    write: / sy-uline(60).
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
      CALL FUNCTION 'WS_FILENAME_GET'
        EXPORTING
          def_filename     = ''
          def_path         = 'C:\'
          mask             = ',Documentos de texto (*.txt), *.txt.'
          mode             = ''
        IMPORTING
          filename         = p_file
        EXCEPTIONS
          inv_winsys       = 1
          no_batch         = 2
          selection_cancel = 3
          selection_error  = 4
          OTHERS           = 5.
      find '.txt' IN p_file.
      if sy-subrc <> 0.
        concatenate p_file '.txt' into sel_file.
      else.
        sel_file = p_file.
      endif.
    top-of-page.
      format color COL_HEADING INTENSIFIED ON.
      uline (60).
      write: / sy-vline, 'COD', at 10 sy-vline, 'NAME', at 60 sy-vline.
      write: / sy-uline(60).
    good luck!
    Regards
    Allan Cristian

  • How to insert text data into temp tables....

    Dear All,
    I have one notepad with three columns, first column is segment1, second column is segment2 & third column is price list....
    and there is no delimiter and exact spaces..(i.e, zizak fomat)
    Ex:-
    xx yy 00009999
    kk mmmm 00009333
    Data is available like above example...So, I need to insert this data into one table.(2LAKSHS OF RECORDS AVAILABLE IN THAT NOTEPAD)
    So, Any can one help me, how to insert this kind of text data into temparory table...
    Regards
    Krishna
    Edited by: user12070109 on May 29, 2010 9:48 PM
    Edited by: user12070109 on May 29, 2010 9:49 PM

    Hello,
    What manu suggested this can be done through oracle forms.
    If as i read your last post you are using that in database it will not work in db. Try to use the same process in oracle forms will work by making some changes.
    And if you don't want to use forms then there is one way using SQL LOADER. It required control file to execute for uploading data.
    See the below link.
    http://www.orafaq.com/wiki/SQL*Loader_FAQ
    In this example its showing filename.csv you can use your file name like yourfilename.txt.
    So your control file will look like this...
    load data
    infile 'file_path\file_name.txt'
    into table table_name  -- use actual table name where you want to upload data
    fields terminated by " "  -- Here using spaces as you mentioned           
    (column1, column2, column3)  -- Here use the three column names of tableAnd after creating control file with the above code. You can call it in command prompt like this
    sqlldr username/password control=control_file_path\control_file_name.ctl log=log_file_path\log_file_name.log
    or
    sqlldr username/[email protected] control=control_file_path\control_file_name.ctl log=log_file_path\log_file_name.log
    Before doing this practice make sure SQLLDR.exe availabe in the machine where you have to execute. Otherwise you will have to install db client for using sqlldr.exe
    -Ammad

  • How to get editable data into internal table

    Hi ABAPers,
    I am displaying REUSE_ALV_GRID_DISPLAY report with one editable field and i have post button in report. Once i select post button i need to get editable data to internal table which i passed to REUSE_ALV_GRID_DISPLAY.
    actually i am writing below code but data is not coming to internal table.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
         i_callback_program                          =  sy-repid
         i_callback_pf_status_set                  = 'PF-STATUS'
         i_callback_user_command               = 'USER_COMMAND '
         it_fieldcat                                        = t_field[]
         i_default                                          = 'X'
        TABLES
          t_outtab                          =   <fs_display1>.       "t_display
    FORM user_command USING g_ucomm LIKE sy-ucomm
                   rs_selfield TYPE slis_selfield.
      g_test1 = g_ucomm.
      CASE g_ucomm.
        WHEN 'POST'.
          READ TABLE <fs_display1> ASSIGNING <fsw_display1> INDEX 1.    "Just for testing index 1
          IF sy-subrc = 0.
            w_display = <fsw_display1>.
            APPEND w_display TO t_display.
            CLEAR : w_display.
          ENDIF.
          PERFORM v1.
          PERFORM bapi_call.
      ENDCASE.
    ENDFORM.                    "USER_COMMAND
    Please help me how to get.
    Regards,
    Raju.

    Hi,
    Try the following:
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    i_callback_program = sy-repid
    i_callback_pf_status_set = 'PF-STATUS'
    i_callback_user_command = 'USER_COMMAND '
    it_fieldcat = t_field[]
    i_default = 'X'
    TABLES
    t_outtab = <fs_display1>. "t_display
    FORM user_command USING g_ucomm LIKE sy-ucomm
    rs_selfield TYPE slis_selfield.
    g_test1 = g_ucomm.
    CASE g_ucomm.
    WHEN 'POST'.
    * to reflect the data changed into internal table
          DATA : ref_grid TYPE REF TO cl_gui_alv_grid. "new
          IF ref_grid IS INITIAL.
            CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
              IMPORTING
                e_grid = ref_grid.
          ENDIF.
          IF NOT ref_grid IS INITIAL.
            CALL METHOD ref_grid->check_changed_data.
          ENDIF.
    READ TABLE <fs_display1> ASSIGNING <fsw_display1> INDEX 1. "Just for testing index 1
    IF sy-subrc = 0.
    w_display = <fsw_display1>.
    APPEND w_display TO t_display.
    CLEAR : w_display.
    ENDIF.
    PERFORM v1.
    PERFORM bapi_call.
    ENDCASE.
    ENDFORM. "USER_COMMAND
    Hope it helps.
    Regards,
    Gilberto Li

  • How to load xml data into a table

    Hi,
    i am a newbie. I want to insert the data of xml file into a table. I am doing this using XSU api for java.
    I am using oracle 9i and jdk 1.7.
    I am using OracleXmlSave class.
    but i am getting following error.
    java.lang.NoClassDefFoundError: oracle/jdbc2/Clob
    Please help in this regard. this is my first thread.
    thanks.
    Edited by: 979682 on Jan 3, 2013 3:39 AM

    Hi,
    You can insert XML data from XML file to Oracle database by this script :
    Hi,
    For reading and inserting the data from XML file to Oracle Database :
    1. CREATE A BLANK TABLE with same structure as XML file :
    select * from xml_test
    2. SELECT QUERY DIRECTLY ON XML FILE :
    SELECT XMLTYPE(bfilename('TEST_DIR', 'data_file.xml'), nls_charset_id('UTF8')) xml_data FROM dual
    3. CREATE ORACLE DIRECTORY AND PLACE XML FILE IN THIS DIRECTORY LOCATION:
    --CREATE DIRECTORY TEST_DIR as '/oracle/test';
    --grant all on directory TEST_DIR to public;
    4. INSERT THE XML DATA IN ORACLE TABLE:
    INSERT INTO xml_test(column1,coumn2)
    WITH t AS (SELECT XMLTYPE(bfilename('TEST_DIR', 'attachment.xml'), nls_charset_id('UTF8')) xml_col FROM dual)
    SELECT
    extractValue(value(x),'/ROW/COLUMN1') column1
    ,extractValue(value(x),'ROW/COLUMN2') column2
    FROM t,TABLE(XMLSequence(extract(t.xml_col,'/ROWSET/ROW'))) x;
    I have assumed a table with 2 columns.
    Regards,
    Rohit Chaudhari
    [email protected]

  • How to load excel data into oracle table

    How do i load data from an excel file with several worksheets into an oracle table?
    using Oracle 10g
    Excel
    sample data of excel
    Name eric Name mary
    AccountNo 123 AccountNo 321
    amount1 5.0 Amount1 1.0
    amount2 5.5 Amount2 2.0
    amount3 6.0 Amount3 3.0
    Total 16.5 Total 6.0
    Name larry Name beth
    AccountNo 123 AccountNo 321
    amount1 5.0 Amount1 1.0
    amount2 5.5 Amount2 2.0
    amount3 6.0 Amount3 3.0
    Total 16.5 Total 6.0
    Note: Assume data are aligned into columns like a real excel workbook

    I have some used something like this.
    don't ask any details as I am not a xl person, but i think its pretty straight forword.
    hope its helpful for you or someone else
    Dim i As Integer
    Dim conn As New ADODB.Connection
    Dim strInsert As String
    Dim strExecInsert As String
    conn.ConnectionString = "Provider=MSDAORA.1;User ID=scott;password=tiger;Data Source=orcl.world;Persist Security Info=False"
    conn.Open
    strInsert = "insert into xlsc ( emp, dept, doj," & _
    "dol, dob, Ce ,ED, v_date ) values("
    'this is to insert first 2347 rows from xl to orcl
    While i < 2348
    strExecInsert = strInsert & "'" & _
    Trim(Cells(i, 1).Value) & "','" & _
    Trim(Cells(i, 2).Value) & "','" & _
    Trim(Cells(i, 3).Value) & "','" & _
    Trim(Cells(i, 4).Value) & "','" & _
    Trim(Cells(i, 5).Value) & "','" & _
    Trim(Cells(i, 6).Value) & "','" & _
    Trim(Cells(i, 7).Value) & "','" & _
    Trim(Cells(i, 8).Value) & "' )"
    'MsgBox strExecInsert
    If Cells(i, 1).Value <> "" Then
    conn.Execute (strExecInsert)
    End If
    i = i + 1
    Wend
    'conn.Execute ("commit")
    conn.Close
    End Sub

  • How to get data of tabulated text file into internal table

    hi all,
    i want to get data from tabulated text file(notepad) into internal table. i searched in SCN and got lot of post regarding  how to convert excel file into internal table but i didnt get posts regarding text file.
    thanks
    SAchin

    try:
    DATA: BEGIN OF tabulator,
            x(1) TYPE x VALUE '09',
          END OF tabulator.
      READ DATASET file INTO wa.
    split wa at tabulator into table itab.
    A.

  • How to write a procedure to load the data into a table using xml file as input to the procedure?

    Hi,
    Iam new to the xml,
    can u please anyone help me how to write procedure to load the data into a table using xml as input parameter to a procedure and xml file is as shown below which is input to me.
    <?xml version="1.0"?>
    <DiseaseCodes>
    <Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
    <Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
    <Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
    </DiseaseCodes>.
    Regards,
    vikram.

    here is the your XML parse in 11g :
    select *
      from xmltable('//Entity' passing xmltype
    '<?xml version="1.0"?>
    <DiseaseCodes>
    <Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
    <Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
    <Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
    </DiseaseCodes>
    ') columns
      "dcode" varchar2(4000) path '/Entity/dcode',
      "ddesc" varchar2(4000) path '/Entity/ddesc',
      "reauthflag" varchar2(4000) path '/Entity/reauthflag'
    dcode                                                                            ddesc                                                                            reauthflag
    0                                                                                (I87)Other disorders of veins - postphlebitic syndrome                           0
    0                                                                                (J04)Acute laryngitis and tracheitis                                             0
    0                                                                                (J17*)Pneumonia in other diseases - whooping cough                               0
    SQL>
    Using this parser you can create procedure as
    SQL> create or replace procedure myXMLParse(x clob) as
      2  begin
      3    insert into MyXmlTable
      4      select *
      5        from xmltable('//Entity' passing xmltype(x) columns "dcode"
      6                      varchar2(4000) path '/Entity/dcode',
      7                      "ddesc" varchar2(4000) path '/Entity/ddesc',
      8                      "reauthflag" varchar2(4000) path '/Entity/reauthflag');
      9    commit;
    10  end;
    11 
    12  /
    Procedure created
    SQL>
    SQL>
    SQL> exec myXMLParse('<?xml version="1.0"?><DiseaseCodes><Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity></DiseaseCodes>');
    PL/SQL procedure successfully completed
    SQL> select * from MYXMLTABLE;
    dcode                                                                            ddesc                                                                            reauthflag
    0                                                                                (I87)Other disorders of veins - postphlebitic syndrome                           0
    0                                                                                (J04)Acute laryngitis and tracheitis                                             0
    0                                                                                (J17*)Pneumonia in other diseases - whooping cough                               0
    SQL>
    SQL>
    Ramin Hashimzade

  • Problem to upload the data into internal table record length more than 6000

    Hi all
            I stuck with this problem from past 3 days. I have to upload the data from excel sheet. iam making it tab delimited and trying to upload from gui_upload. but in the structure of file, we have, one field of 4000 characters, and other fields of 255 characters.
    how can i upload this into internal table . From excel sheet or from tab delimeted or any other format? or any special function module is there?  while iam doing this its truncating the datat 255 characters and not uploading the other fields also...
    can any one of you help me out. ASAP
    thnks in advance

    from one of the forum iam just pasting code which it is used in lsmw, try the same logic in ur code hope it can work.
    you have to create multiple lines with do...enddo loop., like this:
    (assuming excel_long_text-text is 924 characters long, 7 lines X 132 char)
    __GLOBAL_DATA__
    data: offset type i,
    text_132(132) type c.
    __BEGIN_OF_RECORD__ Before Using Conversion Rules
    Rule : Default Settings Modified
    Code: /sapdmc/ltxtl = init_/sapdmc/ltxtl.
    CLEAR offset.
    DO 7 TIMES.
    text_132 = excel_long_text-text+offset(132).
    offset = offset + 132.
    __END_OF_RECORD__ After Using Conversion Rules
    Rule : Default Settings Modified
    Code: transfer_record.
    ENDDO.
    also check this
    COMMIT_TEXT
    To load long text into SAP
    READ_TEXT
    To load long text into SAP

  • Step- by- Step on How to Load Excel data into Crystal Reports?

    Hi Friends,
                      Can anyone send me a Step- by- Step on How to Load Excel data into Crystal Reports? Pls help me. Thanks in Advance.
    Vijay

    It's also important to 'prep' the excel file prior to connecting to it.
    Give the data tab a meaningful name
    Make sure the column headers are unique and that every column has a header
    Delete any blank tabs
    If you have trouble with Excel changing the data type of a field (say, a social security number you want to be a string value rather than a number so you don't lose leading zero) an alternative would be to save the spreadsheet file as a CSV, create a schema.ini to specify the data types for each column (example below) and use the same steps to connect except instead of choosing Excel 8.0, scroll to the bottom and choose Text.  You have to make sure the CSV file is in the same folder as the schema.ini file that defines the columns.
    Schema.ini example:
    200912PUSD.csv
    ColNameHeader=True
    Format=CSVDelimited
    MaxScanRows=25
    CharacterSet=OEM
    Col1=SSN Char Width 9
    Col2=LAST_NM Char Width 25
    Col3=FIRST_NM Char Width 25
    Col4=DOB Date
    Col5=STDNT_ID Char Width 10
    Col6=SORTKEY Char Width 10
    Col7=SCHOOL_NM Char Width 30
    Col8=OTHER_ID Integer
    Col9=GRADE Char Width 2
    The filename in the first line needs to have the []  brackets around it, but I couldn't get it to display in this forum correctly.
    Edited by: Eric Petersen on Jan 27, 2010 9:40 AM

  • How to import legacy data into apex tables

    Hi All,
    Please tell me How to import legacy data into apex tables.
    Thanks&Regards,
    Raghu

    SQL WorkshopUtilitiesData Workshop...
    you can import the data from already exported as (text/csv/xml) data
    Note: the table name and column name should be equal if the table already Existing table.

  • Uploading  Excel sheet  data into internal table

    Hi All,
    I want to upload Excel file data into internal table. My problem is that my excel file  having more than one sheets. I want to upload  the data of particula Excel sheet..
    Please suggest me how can I upload particulat Excel sheet data .
    Thanks and regards
    Praveen

    check this link
    Uploading multiple excel sheets
    You can check Satish's answer in the above link
    Re: uploading data from excel sheets through BDC's into sap system
    <b>Award points if found helpful</b>

  • Extract the classification data into internal table

    Hi all,
    I having requirement to extract classification data for material number.
    1) Provide the selection option for material number (MATNR).
    2) Based on the material number, then extract all that data into internal table as below layout. My problem is how to retrieve the following data from different table based on the MATNR (material number).
    Please provide the sample code for select the following data. Thanks.
    Classification table
    OBJEK  (from AUSP table)
    MAFID (from AUSP table)
    KLART (from AUSP table)
    CLASS  (from KLAH table)
    ATWRT (from AUSP table)
    MSEHI  (from CABN table)
    OBTAB (check if class type=002, set it as “MARA”)
    STDCL (from KSSK table)

    Hi,
    if I understand, you´re trying to get information from the classification system for the material. You can use the following code:
    DATA: clases LIKE TABLE OF sclass WITH HEADER LINE,
          datos LIKE TABLE OF clobjdat WITH HEADER LINE.
    CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
         EXPORTING
              class              = 'DESK'               "clase a buscar
              classtype          = '001'                "tipo de la clase
              features           = 'X'
              language           = sy-langu
              object             = 'PM00A000C055'       "Material
              objecttable        = 'MARA'
              key_date           = sy-datum
              initial_charact    = 'X'
              change_service_clf = 'X'
         TABLES
              t_class            = clases
              t_objectdata       = datos
         EXCEPTIONS
              no_classification  = 1
              no_classtypes      = 2
              invalid_class_type = 3
              OTHERS             = 4.
    loop at datos.
    endloop.

  • Upload excel data into Internal table

    Hi,
    I'm trying to upload excel data into internal table, well the excel file layout will be different on each run of the report.
    Excel file will have 60 columns and 500 record limit. I can upload the excel data using 'ALSM_EXCEL_TO_INTERNAL_TABLE' and 'KCD_EXCEL_OLE_TO_INT_CONVERT' but the output table is generates 60 lines for each record i.e.., 60 * 500 = 30,000 which could cause performance.
    I try with the FM 'TEXT_CONVERT_XLS_TO_SAP', but this will only work if the file structure is static. It didn't work for dynamic file layout. Even GUI_UPLOAD doesn't work to upload excel file, it will work if I convert the file to Tab delimited file.
    Please advise if you know any alternate procedure to upload excel data into internal table.
    Thanks,
    Kumar.

    Moderator message - Cross post locked
    Rob

  • Problem in collecting Spool data into internal table

    Hi ,
    i need to download  spool request data into internal table,
    after collecting i need to loop it and delete some records,
    for this i am using  Fm  RSPO_RETURN_ABAP_SPOOLJOB
    but getting some extra spaces and lines,unable to get right format.
    please help me in this issue to prepare internal table like normal internal table with spool id.
    Regards
    sarath

    Hi ,
    Thanks for the reply,
    My requirement is like i need to collect all the records from the spool to Internal table and
    after that based on one field in the internal table i have to separate error records by deleting sucess records from that internal table(from spool),
    for that i have to loop the internal table and need to count the error records, after that download to excel and mail functionalities
    required for that .
    so please help me in this.
    Regards
    sarath

Maybe you are looking for

  • Is there any way to have a clear or transparent dock. Or to change the dock at all I would love to see that!

    It is exasperating that the iPhone dock cannot be adjusted in any way. I would love to see a transparency slider or a few style choices. C'mon apple. This makes sense!

  • Create user with read access for all tables SAP SID .*

    Hello all, could you please help me ? I would like to grant select privilege on all tables SAP<SID>.* for newly created user. I have created standard database user (not exclusive). I`m able to grant select for individual tables, but I would like to g

  • How to pass more than 3 Items in link of report attribute?

    I have a report with edit link. After user click link, then go to next page. I want to pass more than 3 items in this link, item 1 name=xxx and value=#xxx#. How can I do this? Thanks.

  • Inserting Information in PostgreSQL interval

    Hey, I am having trouble entering intervals into a PostgreSQL inverval field. Currently I using prepared statements that look like this: PreparedStatement query = conn.prepareStatement("INSERT............"); query.setObject(1, "{28.1, 29.2}"); query.

  • IF problems

    Hello All, In numbers I am trying to utilise the IF statement to preform some decision making, pictured above is the IF statement I am trying to get working, I have two colums, when I click on the leftmost check box the description in the Status colu