How to load the data from a staging table to interface table
Hi..
I have a staging table having these many columns
invoice_number,invoice_date,vendor_name,vendor_site_code,description,line-amount,line-description,segment1,segment2,segment3,segment4,segment5
I want to insert data into oracle interface tables
1st table is ap_invoices_interface which is primary
and 2nd is ap_invoice_lines_interfaces.
According to the invoice_id I have to insert the sum of amount in the amount column of primary table
can anyone plz give the codes .
any help appreciate
Hi,
you need to write pl/sql procedure or package for validiating the data and inserting.
first u need to know wat r the mandatory colums. and write the code igiving here a simple example
Create or replace procedure xxstg_po_vendors_int(errbuf out varchar2,retcode out number) IS
Cursor po_cur IS Select sno,VENDOR_NAME,SUMMARY_FLAG,ENABLED_FLAG From xxstg_po_vendor;
l_SUMMARY_FLAG Varchar(1);
l_ENABLED_FLAG varchar(1);
l_VENDOR_NAME varchar2(240);
l_err_msg varchar2(240);
l_flag varchar2(2);
l_err_flag varchar2(2);
Begin
Delete from Ap_suppliers_INT;
commit;
for rec_cur in po_cur loop
l_flag :='A';
l_err_flag:= 'A';
Begin
select summary_flag into l_SUMMARY_FLAG from po_vendors
where summary_flag = rec_cur.summary_flag;
Exception
when others then
l_summary_flag:= null;
l_flag:='E';
l_err_msg:= 'Summary_flag Does not Exist';
END;
FND_FILe.PUT_LINE(FND_FILE.LOG,'Inserting data into interface table'||l_flag);
Begin
Select enabled_flag into l_enabled_flag from po_vendors
where enabled_flag = rec_cur.enabled_flag;
exception
when others then
l_enabled_flag:=null;
l_flag :='E';
L_err_msg:='Enabled_flag Does not Exist';
End;
FND_FILE.PUT_LINE(FND_FILE.log,'Inserting data into interface table'||l_flag);
FND_FILE.PUT_LINE(FND_FILE.log,'Inserting data into interface table'||l_flag);
INSERT INTO AP_SUPPLIERS_INT
( VENDOR_INTERFACE_ID,VENDOR_NAME,SUMMARY_FLAG,ENABLED_FLAG )
values(rec_cur.sno,rec_cur.VENDOR_NAME,rec_cur.SUMMARY_FLAG,rec_cur.ENABLED_FLAG);
l_flag :=null;
l_err_msg:=null;
end loop;
commit;
end;
Regards
Goutham
Similar Messages
-
How to Load the data from excel file(Extension is .CSV) into the temp.table
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinHello Sachin,
You can use the following metalink note:How to Read Data from an EXCEL Spreadsheet into a Form Using Webutil Client_OLE2 (Doc ID 813535.1) and modify it a little bit.
Instead of copy values into forms you can save them in your temporary table.
Kind regards,
Alex
If someone's helpful or correct please mark it accordingly. -
How to load the data from .csv file to oracle table???
Hi,
I am using oracle 10g , plsql developer. Can anyone help me in how to load the data from .csv file to oracle table. The table is already created with the required columns. The .csv file is having about 10lakh records. Is it possible to load 10lakh records. can any one please tell me how to proceed.
Thanks in advance981145 wrote:
Can you tell more about sql * loader??? how to know that utility is available for me or not??? I am using oracle 10g database and plsql developer???SQL*Loader is part of the Oracle client. If you have a developer installation you should normally have it on your client.
the command is
sqlldrType it and see if you have it installed.
Have a look also at the FAQ link posted by Marwin.
There are plenty of examples also on the web.
Regards.
Al -
How to load the data from excel file into temprory table in Forms 11g?
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinDeclare
v_full_filename varchar2(500);
v_server_path varchar2(2000);
v_separator VARCHAR2(1);
v_filename VARCHAR2(400);
filename VARCHAR2 (100);
v_stop_load varchar2 (2000);
v_rec_error_log varchar2(4000);
v_error_log varchar2(4000);
ctr NUMBER (12);
cols NUMBER (2);
btn number;
RES BOOLEAN;
application ole2.obj_type;
workbooks ole2.obj_type;
workbook ole2.obj_type;
worksheets ole2.obj_type;
worksheet ole2.obj_type;
cell ole2.obj_type;
cellType ole2.OBJ_TYPE;
args ole2.obj_type;
PROCEDURE olearg
IS
args ole2.obj_type;
BEGIN
args := ole2.create_arglist;
ole2.add_arg (args, ctr);
ole2.add_arg (args, cols);
cell := ole2.get_obj_property (worksheet, 'Cells', args);
ole2.destroy_arglist (args);
END;
BEGIN
v_full_filename := client_get_file_name(directory_name => null
,file_name => null
,file_filter => 'Excel files (*.xls)|*.xls|'
||'Excel files (*.xlsx)|*.xlsx|'
,message => 'Choose Excel file'
,dialog_type => null
,select_file => null
If v_full_filename is not null Then
v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
v_filename := v_separator||v_full_filename ;
:LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);
RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));
--Begin load data from EXCEL
BEGIN
filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
application := ole2.create_obj ('Excel.Application');
ole2.set_property (application, 'Visible', 'false');
workbooks := ole2.get_obj_property (application, 'Workbooks');
args := ole2.create_arglist;
ole2.add_arg (args, filename); -- file path and name
workbook := ole2.get_obj_property(workbooks,'Open',args);
ole2.destroy_arglist (args);
args := ole2.create_arglist;
ole2.add_arg (args, 'Sheet1');
worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
ole2.destroy_arglist (args);
ctr := 2; --row number
cols := 1; -- column number
go_block('xxx');
FIRST_RECORD;
LOOP
--Column 1 VALUE --------------------------------------------------------------------
olearg;
v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
:item1 := v_stop_load;
cols := cols + 1;
--Column 2 VALUE --------------------------------------------------------------------
olearg;
:item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
cols := cols + 1;
--<and so on>
ole2.invoke (application, 'Quit');
ole2.RELEASE_OBJ (cell);
ole2.RELEASE_OBJ (worksheet);
ole2.RELEASE_OBJ (worksheets);
ole2.RELEASE_OBJ (workbook);
ole2.RELEASE_OBJ (workbooks);
ole2.RELEASE_OBJ (application);
END;
--End load data from EXCELPlease mark it as answered if you helped. -
How to load the data from excel file into table in oracle using UTL_FI
How to load the data from excel file into table in oracle
and from table to excel file
using UTL_FILE package
Please give me some exampleThis is something i tried in oracle apex
http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
Regards,
CKLP -
How to load the data from informatica into bw & how to report the data
Hi friends,
how to load the data from informatica into bw & how to report the data
using cognos.(i.e how to access the data in sap bw using cognos 8 BI suite).
Thanks,
madhu.Inorder to report BW data into Cognos you can extract data from using Open Hub to the DB table from which Cognos reads.
For BW informatic integration refer following docs:
http://www.aman.co.il/aman/pfd/DataInteg_BR.q103cd.pdf.pdf
http://h71028.www7.hp.com/enterprise/cache/3889-0-0-225-121.html
http://devnet.informatica.com/learning/ePresentations.asp
http://72.14.203.104/search?q=cache:C741L86Q19oJ:devnet.informatica.com/showcase/resources/Essbase_DataSheet.pdfinformaticapowerconnect(BI)&hl=en&gl=in&ct=clnk&cd=3
http://www.informatica.com/customers/utilities_energy/fpl_group.htm
http://www.informatica.com/solutions/resource_center/technote_sapbw_65241004.pdf#search=%22Informatica%20to%20Bw%22 -
How to get the data from a cluster table to BW
Dear All,
I want to extract the data from R/3 to BW by using 2 tables and one Cluster B2.
Actually my report contains some fields from PA2001, PA2002 and one cluster table B2 (Table ZES). Can I create View by using these 3 tables? If it is not possible how can I get the data from the cluster? Can I create generic datasource by using cluster tables directly?
In SE11 Transaction the Cluster (table ZES) is showing invalid table.
I referred some Forums, but no use.
Can any body tell me procedure to get the data from a cluster (table ZES) ?
Waiting for you results.
Thanks and regards
RajeshHI Siggi,
Thank you for your reply..
I am also planning to do FM to get the data. But it is saying that the Cluster table ZES does not exist (ZES is the the standard table, in SE11 also).
How can I use the Fields from the that table.?
What can I do now, can you please explain me about this point.
Waiting for your reply.
Thanks and Regards
Rajesh
Message was edited by:
rajesh -
How to pass the data from a input table to RFC data service?
Hi,
I am doing a prototype with VC, I'm wondering how VC pass the data from a table view to a backend data service? For example, I have one RFC in the backend system with a tabel type importing parameter, now I want to pass all the data from an input table view to the RFC, I guess it's possible but I don't know how to do it.
I try to create some events between the input table and data service, but seems there is no a system event can export the whole table to the backend data service.
Thanks for your answer.Thanks for your answer, I tried the solution 2, I create "Submit" button, and ser the mapping scope to be "All data rows", it only works when I select at least one row, otherwise the data would not be passed.
Another question is I have serveral imported table parameter, for each table I have one "submit" event, I want these tables to be submitted at the same time, but if I click the submit button in one table toolbar, I can only submit the table data which has a submit button clicked, for other tables, the data is not passed, how can I achieve it?
Thanks. -
How to recover the data from a dropped table in production/archive mode
How to recover the data/change on a table that was dropped by accident.
The database is on archive mode.Oracle Version. ? If 10g.
Try this Way
SQL> create table taj as select * from all_objects where rownum <= 100;
Table created.
SQL> drop table taj ;
Table dropped.
SQL> show recyclebin
ORIGINAL NAME RECYCLEBIN NAME OBJECT TYPE DROP TIME
TAJ BIN$b3MmS7kYS9ClMvKm0bu8Vw==$0 TABLE 2006-09-10:16:02:58
SQL> flashback table taj to before drop;
Flashback complete.
SQL> show recyclebin;
SQL> desc taj;
Name Null? Type
OWNER VARCHAR2(30)
OBJECT_NAME VARCHAR2(30)
SUBOBJECT_NAME VARCHAR2(30)
OBJECT_ID NUMBER
DATA_OBJECT_ID NUMBER
OBJECT_TYPE VARCHAR2(19)
CREATED DATE
LAST_DDL_TIME DATE
TIMESTAMP VARCHAR2(19)
STATUS VARCHAR2(7)
TEMPORARY VARCHAR2(1)
GENERATED VARCHAR2(1)
SECONDARY VARCHAR2(1)
SQL>M.S.Taj -
How to load the data from flat file ( ex excel ) to Planning area directly
Hi all ,
How can i load thedata fro m flat file directly to Planning area .
PLease help me in this.
Regards,
Chandu .download one key figure data from planning book ( interactive damand plan) and made some changes and need to upload the data back to same planning book
But, may I know why you are thinking of downloading, changing and uploading for just changing the figures for a particular key figure. You can do it in the planning book itself.
However, not all the key-figures can be changed. But, what type of key-figure you are speaking here? Is it like 'Forecast' for which the value is based on other key-figures, or is like a key-figure where some manual adjustments are to be done--so that it can be manually edited? However, in both the cases, the data can be changed in the planning book only. In first case, you can change the values of dependant key-figures and in the second case, you can change the key-figures directly.
And please note that you can change the values of the key-figures only at the detailed level. So, after loading the data in the book, use drill-down option, maintain the data at the detailed level, change the figures, and automatically, this gets reflected at the higher level.
In case you are unable to change the values, go to the 'Design' mode of the book, right-click your key-figure, under "Selected Rows", uncheck "Output Only" option. In case you are unable to see that option, then you are not authorised to change that. See if you can change the authorisations by going to the "Data View" tab in planning book configuration (/n/sapapo/sdp8b), and change the value of Status to 3.
Hope your query is answered with different solutions offered by many of the sdn colleagues here.
Regards,
Guru Charan. -
How to load the data using a plsql table in ODI.
Hi All ,
Can anyone help me on this ?
We have a PLSQL procedure which returns a plsql table as out parameter.
We are supposed to load the data in to a file using this plsql table (Table type) in ODI.
Can this be done using ODI?
Regards,
Karthik+Hi,
We have one process with a ref cursor (Oracle) as a source and remote Oracle DB as a target. I ended up writing my own KM that populates a global temporary table from the cursor first and then transfers the data to target. If temporary table is an option for you, the rest is pretty easy.
Regards. -
How to read the data from an internal table,when column names are known
Hi All
I have a specific requirement. I got an internal table with many fields (let it be my_tab). Some of the fieldnames (column names in internal table my_tab) are stored in separate internal table(let it be my_fields).
I need to store/read data corresponding to the fields (whose name is stored in my_fields) from my_tab.
I am able to build dynamic table (referred by field-symbol) with respect to the given field names in my_fields.
But i am unable to read the data corresponding to the fieldnames from my_tab.
Please provide me some pointer in this regard.
Regards
Swetabh ShuklaHI All
Thanks for the prompt response. I got solution for my question. Please check below thread. For quick reponse i posted my question in one more category. Thanks to all of you.
How to read internal table w.r.t. fieldnames stored in other table -
How to read the data from a sorted table
Hi all,
How to read data from the sorted tables. Please provide some examples.
Thanks and regards,
LisaYou can read like this :
DATA: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA ITAB LIKE SORTED TABLE OF LINE WITH UNIQUE KEY COL1.
DO 4 TIMES.
LINE-COL1 = SY-INDEX.
LINE-COL2 = SY-INDEX ** 2.
INSERT LINE INTO TABLE ITAB.
ENDDO.
CLEAR LINE.
READ TABLE ITAB WITH TABLE KEY COL1 = 3
INTO LINE TRANSPORTING COL2.
WRITE: 'SY-SUBRC =', SY-SUBRC,
/ 'SY-TABIX =', SY-TABIX.
SKIP.
WRITE: / LINE-COL1, LINE-COL2. -
How to fetch the data from pl/sql table dynamically
Hi All, I have the requirement of comparing two db views data in pl/sql. So, I have bulk collect the view into pl/sql table. But, the issue is, It is expecting to provide the column name for comparison. But, in my case, column name is dynamic. So, i cannot provide the column name directly for comparison.
For eg: In my view t1_VW, i have 4 columns. stid, c1,c2,c3,c4 and similar structure for t2_vw
my code
TYPE v1_type IS TABLE OF t1_vw%ROWTYPE;
l_data v1_type;
TYPE v1_type1 IS TABLE OF t2_vw%ROWTYPE;
l_data1 v1_type1;
test varchar2(1000);
test1 varchar2(1000);
temp1 number;
begin
SELECT * Bulk collect into l_data
FROM T1_VW;
SELECT * Bulk collect into l_data1
FROM T2_VW;
select l_data(1).stid into temp1 from dual; -- It is working fine and gives me the value properly
-- But, in my case, we are reading the column names from array, i am constructing the query dynamically and execute it.
test :='select l_data(1).stid into temp1 from dual';
execute immediate test into temp1;
-- I am getting error as follows:
Error report:
ORA-00904: "L_DATA": invalid identifier
ORA-06512: at "SYSTEM.BULKCOMPARISON", line 93
ORA-06512: at line 2
00904. 00000 - "%s: invalid identifier"
*Cause:
*Action
end;
- Please help me to get rid of this issue. Is it possible to construct the query dynamically and fetch the data?. If not, is there any other better approach to compare the data between two views?.Output should display what are all columns changed and its old value and new value.
For eg., output should be
COLUMNNAME OLD_VALUE NEW_VALUE STID
C1 20 10 1
C2 50 40 2
C3 60 70 2
C2 80 90 3Why no do this only via a simple sql ?
create table a (STID number, C1 number, C2 number, C3 number);
insert into a values (1, 20, 30, 40)
insert into a values (2, 40, 50, 60);
insert into a values (3, 90, 80, 100);
create table b as select *
from a where 1 = 0;
insert into b values (1, 10, 30, 40)
insert into b values (2, 40, 40, 70);
insert into b values (3, 90, 90, 100);
commit;And now you can issue such a kind of select
SELECT stid , c1, c2, c3
FROM
( SELECT a.*,
1 src1,
to_number(null) src2
FROM a
UNION ALL
SELECT b.*,
to_number(null) src1,
2 src2
FROM b
GROUP BY stid , c1, c2, c3
HAVING count(src1) <> count(src2)
order by stid;I would then create a new table a_b_difference having the same structure as a or b and insert into it like this
create table a_b_diff as select * from a where 1 = 0;
insert into a_b_diff
SELECT stid , c1, c2, c3
FROM
( SELECT a.*,
1 src1,
to_number(null) src2
FROM a
UNION ALL
SELECT b.*,
to_number(null) src1,
2 src2
FROM b
GROUP BY stid , c1, c2, c3
HAVING count(src1) <> count(src2)
order by stid
;Then each time there is a difference between a column in a and its equivalente one in b (per unique stid ) a record will be inserted in this table.
You can do more by adding the name of the table in front of each record in this table to see exactly where the data comes from
Best Regards
Mohamed Houri -
How to load the data from flat file
Hi ,
Im new to Oracle 10g . I have to upload a flat flle(notepad with , as a seperator) to the table in the database,
can you please tell me how to do it ?
Thanks
viviHi vivi,
Sure, read about the wonderful SQL*LOADER. This tool's purpose is exactly that.
Here's a link: Tahiti start page. Just type in sql*loader and off you go.
Since you did not mention your database version, I could not put a better one.
Regards,
Guido
Maybe you are looking for
-
Use of Apps with different Apple IDs
Can an App purchased from Store using one Apple ID be used by another Apple ID on the same iPad?
-
I'm working on an application for interacting with a database, the database has a Java API and a C API for some of the backend functions. I'd like to use some of the C API for the backend to improve the performance of the application. The problem is
-
Having trouble with condenser microphone and Logic Pro. please help
I purchased a condenser microphone that runs only with phantom power. I have an XLR cable from the mic into the phantom power interface and have an XLR to USB plugged into my computer, when i go to logic audio preferences it doesnt show that the micr
-
Firefox is not displaying the Actions menu in Google calendar
I have used Google calendar on my old XP machine. I have a new Win7 64 bit machine and now Firefox does not completely display the Google calendar page. The word Actions is displayed at the lower right corner, but the icons are off screen and unavail
-
Anti-phishing, anti-malware site blocking not working after settings to enable
Tried the anti-phishing and anti-malware test pages with correct security settings as directed; they both load fine--which they shouldn't!