How to look at Sync Speeds

Previously on the home hub 2 and BT Total broadband you could look at your up and down sync speeds under the hub manager. Obviously now the connection comes through the openreach modem and then into the home hub. How can i access the modem page to view the sync speed ?
IT SUPPORT TECHNICIAN - Comptia A+ Certified, MTA Qualified and MTSC qualified
Solved!
Go to Solution.

You can't. It's Openreach kit and the firmware is locked.
The only way to get a rough idea of your sync is from your IP profile which can be found by running a test at www.speedtester.bt.com.
The IP profile is about 96.7% of your sync rate.
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution’

Similar Messages

  • Since itunes 2.0.4 has been downloaded. My ipod doesn't synchronize properly/ at all.The LED screen shows  "copy 1 or 2 from 101" and it will remain like that. It looks like sync but there's nothing to happen. It doesn't stop by it self. How to solve?

    Since itunes 2.0.4 has been downloaded my ipod doesn't synchronize properly/ at all. The LED screen shows çopying 1 or 2 from 101' and itt will remain like that.
    It looks like sync but nothing is happening. The sync doesn't stop by itself. Is there anybody to solve this problem? In previous versions never a problem.

    I have exactly the same issues with my new 80G iPOD. I have found that when connecting to my PC, the iPOD does not start iTUNES 7. This can be resolved by stopping the iPOD Service in Computer Management, connecting the iPOD and then starting it again. Then when you start iTUNES it finds the iPOD. - http://docs.info.apple.com/article.html?artnum=93716
    Seems like a stupid long-winded way to do things, but at least you can get some stuff on to your iPOD.
    As far as using Restore goes - I just get the restoring iPOD message you described, which it blatantly isn't :((
    DELL   Windows XP Pro  

  • Questions and answers on DLM, sync speed and real ...

    I was confused about some DML details and posted on a BE forum (https://avatar.bethere.co.uk/forum/viewtopic.php?t=43542) and got what was to me an incredibly helpful response from Tom (drsox).  I thought it would be of interest to some readers here so copy it below.  Once again, many thanks Tom.
    1) FTTC DLM applies only between the cabinet and the modem? 
    >> Yes, as there isn't any broadband / data signal going anywhere further down the line to the exchange if you are on FTTC! 
    2) What are the different parameters that apply on this hop? I know there is a current sync speed, a current snr, a target snr and an ip profile. Anything else? 
    >> The IP profile isn't really related to DLM, it just "follows" your sync rate. In the past the IP profile would take up to 3 days to "follow upwards", leaving you with a high sync and awful speeds! This has been changed now on 21cn and "RE-ppp"ing (rebooting the router) would force the IP Profile to update instantly. 
    DLM changes the SNR target. So where BE have hard coded / set SNR targets such as 3db, 6db, 9db, 12db etc.. They only change upon user request. BT use their DLM system where line instability or line error counts are collected and analysed, the SNR target and interleaving settings are then modified in increments to try and stabilise the line. 
    This image shows quite well how, over a 6 day period, BTs DLM noticed that my line fault was fixed. I didn't get the full speed back for a week. 
    3) Is the ip profile the same as the BRAS profile? 
    >>Yes 
    4) The DLM keeps statistics of errors etc to dynamically change the ip profile? 
    >> Changes the SNR target and interleaving for the line which will reduce the speed, and therefor the IP profile. 
    5) There is a general theory that the DLM is incapable of telling the difference between an error and a modem power cycle, so that power cycling can cause your profile to lower. Is that correct? 
    >> Yes, if you resync / power cycle your router multiple times in a day it is likely to try and "combat the line errors" and reduce your sync rate by increasing the SNR and / or interleaving on the line. 
    6) Can other connections and disconnections have the same effect? For example, if I reboot the router (where this is separate from the modem)? Or use the router interface to disconnect/reconnect the broadband? 
    >> PPP drops (router reboots while leaving the BT Openreach VDSL modem on and connected) won't affect DLM. The IP profile will match your sync rate upon reconnection of the PPP session. 
    7) If you have a low ip profile, does this mean that the sync is limited to the ip profile? 
    >> Other way around, if you have a low sync rate then the IP profile will match the sync rate. If you get an awful sync rate and the IP profile follows downwards, then you resync higher but the router "keeps the PPP session open" (which is possible if you resync quick enough) then your IP profile will stay low, even though the sync is high. Until you reboot your router or disconnect and reconnect the PPP session. 
    8) Can the sync rate change dynamically without a reconnection? If the ip profile gradually rises, will the cabinet force a resync to make sure the customer is actually getting the benefit of the higher ip profile, or must the user intervene with a modem resync? 
    >> See above - Sync can rise without affecting the IP Profile and the cabinet does not force a RE-PPP. 
    8) As I understand it, if the ip profile gets stupidly low for some reason, it can only be reset by BT wholesale? This will only be done after a visit to your home and a telephone call from the engineer to the BT wholesale central admin? 
    >> Mixed reports plus I don't think people understand the difference between sync speeds, line faults, the delay in DLM increasing sync after a fault.. I expect half the reports on the BT forum are not related to a stuck BRAS / IP profile. It is possible for the ISP or a BT engineer to reset the IP profile and possibly DLM training. 
    9) (8) This applies to all ISPs using BT Wholesale: some may be more willing to force this process to happen on behalf of their customers, but none can cirumvent it? 
    >> GEA providers (I believe) still have DLM but don't have BRAS / IP profiles unless they implement their own. 
    10) Who sets the snr? As I understand it, the customer has no direct control. Is this different for different ISPs? 
    >> Mixed information again, I believe that BT Wholesale give providers DLM override controls and SNR settings but none? (or few) ISPs use this system. 
    11) Real download/upload speeds are physically limited by the sync rate. They are also naturally limited by local limitations (such as wireless connections), server limitations, and congestion at various points along the route? Any more? The congestion along the route will vary bewteen ISPs as they use different routes with different capabilitues. 
    >> It is possible for BTs regional or local cabinet network to become congested. Supposedly the minimum speed you should achieve over the BT part of the network is 15mbps. ISPs such as Plusnet, BT etc.. then layer their own "discriminatory" traffic management on top of that (ie, slow down torrents etc.). 
    12) Real speeds are 'unnaturally' limited by throttling. This will also vary from ISP to ISP. Sky claims to have none, and BT none except for p2p. PlusNet and John Lewis have significant (but well explained)throttling. All the more expensive operators have none. 
    >> What you said  
    13) The ip profile affects the sync rate, and therefore actual speeds. Does the ip profile effect actual speeds in any other way? 
    >> Not quite right. The IP profile directly affects the speeds you can achieve but the sync rate affects the IP profile. The sync rate is determined by the stability and quality of your line and what DLM thinks it can cope with. 
    14) Many people (including AndrueC above) report real speeds from speedtests that are consistent and not close to the ip profile. These can't be explained by congestion (that would make them inconsistent). They can't be explained by server limitations, as they are consistent accross servers and the same servers give better speeds to other people. They can't be explained by local limitations, too many people claim sudden drops where the local conditions have not changed. They should not be able to be explained by throttling, as they as seen for many ISPs who do not throttle (I don't hold with the ISP lying theory here). What other factors are there that can explain these cases? 
    >> AndrueC and some other Sky customers have strange symptoms where speeds are around 20mbps rather than the full sync speed. The only logical explanation is either local cabinet congestion, contention between BT and the provider's network (not enough investment by the provider) or artificial traffic management on the providers side. It is also possible that the router that the customer has attached to their line is unsuitable for the higher speeds. For example an old ethernet router may only be able to cope with 20 or 30mbps! A friend of mine has a TP-Link ethernet router running Tomato on a BT 80mbps service but the TP-Link's CPU limitation causes his service to only perform at around 68mbps; he has a replacement router on order. (Obviously wifi will significantly reduce performance). 
    15) If you get a stupidly low ip profile, how long can you except it to take before it climbs to something more reasonable? (eg in my particular case, my profile is currently around 15Mb, and from BT service line tests should be around 58Mb). And the classic question, is it best to power cycle the modem (1) never, (2) occasionally (how often) or (3) never if at all possible? Mine did jump from 3.5Mb to 15Mb on one power cycle. Was that just coincidence? 
    >> My FTTC line took about 6 to 7 days to go from 40mbps to 80mbps after a line fault. It is possible that your 3.5mbps to 15mbps increase was the "re-ppp" affecting the BRAS profile and that your sync had slowly been increasing over time. 

    what a waste of money sending an engineer to "fix a fault" which does not exist.  Precisely.
    In my original BE post to which Tom so helpfully responded, I began:  It seems to me that DLM is an excellent concept with a highly flawed implementation, both technically and administratively.   I think that sending out an engineer to fix an obviously flawed profile is the main example of an adminastrative flaw.  I understand (I can't remember source, maybe Tom again) that they are sometimes relaxing the requirement for a visit before reset.
    Maybe the DLM system is too keen on stability vs speed.  This will keep complaints down from many people: most users won't notice speed too much as long as it is reasonable, but will be upset if their Skype calls and browsing are being interrupted too often.  
    However, it does lead to complaints from people who notice the drops after an incidence (as in your thread that has drawn lots of interest), or who only get 50 instead of 60.  The main technical flaw is that DLM can so easily be confused by drops from loss of power, too much modem recycling, etc, and then takes so long to recover.

  • How to get 802.11n speed for Apple TV?

    I installed my first Apple TV yesterday. Great stuff!
    My iTunes movie library is on a Core 2 Duo MacBook Pro. I have not yet used the AirPort Extreme 802.11n Enabler on this MacBook, since I just found out it exists. If I use it, can I utilize 802.11n sync speeds with the Apple TV? How?
    My AirPort network uses only an "old" 802.11g AirPort Extreme base station, not the "new" AirPort Extreme base station with 802.11n.
    I have three 802.11g AirPort Express base stations on my network, mainly for using AirTunes.
    My iMac connects to my wireless network using 802.11g, and I don't think the 802.11n Enabler works with it.
    My cable modem current connects to my Airport Extreme (802.11g) base station via Ethernet.
    I understand I can get a new AirPort Extreme 802.11n base station to replace the 802.11g one, and that would let me use the higher 802.11n speed from the MacBook to the Apple TV. It would also allow (unless I misunderstand) all my 802.11g devices to access the network at the lower speeds they are capable of. Correct?
    I also understand there is something called a "dual band network" that involves using both base station types in one large network, but I don't know what the advantage of doing that would be, compared with just replacing the old base station. Can someone fill me in on that?
    And, is there any way to get 802.11n speeds from the MacBook Pro to the Apple TV without getting an 802.11n base station?
    Thanks in advance.

    If I use it, can I utilize 802.11n sync speeds with the Apple TV? How?
    And, is there any way to get 802.11n speeds from the MacBook Pro to the Apple TV without getting an 802.11n base station?
    No. Unless you set up an adhoc network between your Mac and the Apple TV.
    I understand I can get a new AirPort Extreme 802.11n base > station to replace the 802.11g one, and that would let me > use the higher 802.11n speed from the MacBook to the Apple > TV.
    Yes, it would.
    It would also allow (unless I misunderstand) all my 802.11g devices to access the network at the lower speeds they are capable of. Correct?
    If you set things up this way, then I believe you wont be able to use wideband mode on the AEBSn. Your AEBSn will be opperating in mixed mode and its 802.11n performance will be degraded. The best set up would be to keep your old router to service the G only devices, and have your new AEBSn service the N capable devices. This would allow you to take full advantage of the performance increase provided by 802.11n capable devices.
    Message was edited by: ctomer

  • How can I re-sync my iPhone and iPad after accidentally deleting my iTunes library (without losing all of the apps on my devices)?

    Long story short: A sequence of bad decisions on my part caused me to delete my entire iTunes library (song files, apps, itl file, everything in the music folder).  Another bad decision left me without a Time Machine backup of this folder. I have a backup of my music and I can redownload audiobooks from Audible, so I'm not stressed out about my audio.
    The problem is my iPhone and iPad. I've downloaded >400 apps and have over 100 on each device. How can I begin syncing them to this new, app-free library without having every app deleted (along with their organization, settings and related-documents). I use these devices heavily so this is a huge conundrum for me.
    The next step would seem to be to restore my audio files to a new iTunes library, but how do I then sync my devices to that library without wiping out every app on my iDevices?  I'm a pretty technical user and am willing to hand edit the ITL files if necessary.  I think that i _may_ be able to find a version of the itl file that's about a year old from an ancient backup. But that still doesn't solve the whole problem.
    Thank you,
    Spencer

    I managed to lose an earlier reply I'd started before you came back with your "solved" so I didn't bother to retype it.
    It went something like this:
    You should be able to recover the media with the tips in  this post from forum regular Zevoneer but I'm not sure what the implications are for your application settings. You can probably transfer your purchases into an authorised library, backup the device, recover any other media using third party tools, then restore the device from the backup.
    The older .itl file is useful however as iTunes should see this as the "home" library for your device which will allow you to preserve the application settings. (.itl file? Mac? I assume the library has migrated from PC to Mac at some point). Any files in the Previous iTunes Libraries folder or did you kill those as well? The most recent of these would be the best place to start.
    And no, the .itl file is not editable by mortals...
    Once you've restored the media from backups or recovered whatever else you useful can from the device, the scripts MusicFolder Files Not Added and Super Remove Dead Tracks should help get the library up to speed with the contents of the media folder.
    tt2

  • How do you change the speed of a detached audio clip?

    I have a piece of detached audio.  Video Frame rate is 23.98.  The piece of Video above it is Video Frame Rate 24.
    How do I change the speed of this detached audio clip?

    Nope, the Automatic Speed did not work.  I exported the XML, and then ran it through X2Pro to try and get my AAF, and it still spits out conform warnings/errors on those same spots.  Automatic Speed apparently did nothing helpful to my situation.  (Can Anyone explain Automatic Speed?)
    Will have to try going through Cinema Tools per the similar issues noted in this conversation: http://forums.creativecow.net/thread/344/28007
    Curious to see what FCPX would do with this media, importing the 24p file to a 25 Project cause a noticeable shift in both time and pitch.
    I imported the time coded audio separately, and played it against the obviously speed and pitched changed video with embedded audio. The files did not sync.
    The audio remained in time and pitch, while the video didn't. So the audio tc doesn't seem to effect playback in FCPX, but video definitely does, and it seems rather buggy.
    So, if your video is 24.0 and your audio is 23.98 and you are in a 23.98 timeline, FCPX might be changing the speed of the video without really reporting it. Resetting speed doesn't do anything, hitting "automatic speed" screws it up a bit more (it goes the wrong way). Changing the speed to something like 96% (FCPX reports 96% but I know it's really ((24000/1001)/25) which is just short of 96%. Turning off the "preserve pitch" checkbox actually pitched the audio back to normal.
    I didn't create the 24.0 vs 23.9 media that you have, but perhaps you are having similar issues, or a different combination/permutation therein.
    But to answer your question, the time coded audio was not changed, only embedded audio.
    and
    But here some notes which makes things hopefully clearer.
    Resampling and changing playback speed are two totally different things.
    Samplerate for audio is the same as fps for video (not dpi for video) so let's call it sps.
    You can record audio at any sampling rate. But let's take 48 kHz and 32 kHz here.
    Record 60 seconds. Once recorded both files as stand alone files will play 60 seconds.
    But forced to play back in a NLE timeline with a fixed sps of 48 the first file will playback correctly. The second one will play at 2/3 of the time (32/48). The other way round the 48 sps file will play longer in a 32 sps timeline.
    Now for those poor guys who have to work with NTSC:
    A real world second is not a second in NTSC video world. Its 1001/1000 seconds.
    So selecting a 48k sps audio preset in a timeline preset means that a real world audio of 60 seconds is only 1000/1001x60. That means that those 60 seconds are only 59.94 seconds long. Its too short.
    One way - if you stay strictly in NTSC - is to record audio with 48048 Hz. This way a real world 1 second audio will match a 1 second NTSC video.
    Next option with BWAVE files is to change the playback settings in the BEXT header of the file. This won't resample the file!!!
    Now about the TC. BWAVE doesn't have a TC in a way you're used when handling video. It has a timestamp in the header. This timestamp contains the Samples after Midnight. Based on that the NLE will convert this to TC which can be displayed. So in NTSC world this might give a wrong interpretation.
    For example if you have a "Start TC" of 00:10:00:00 (thats what you see on your audio recorder) it means that using 48kHz the timestamp is at 600x48,000 = 28,800,000 samples. Since the real sampling rate in the timeline though is 48048 Hz you have to divide the source stamp by this number. This results in 9.99000999000999 minutes. So for a 23.976 fps project this is a TC of 00:09:59:10.
    So setting the Bext header and/or iXML chunk to the correct playback speed will keep everything intact. Again this is without resampling!
    Using an AIFF there aren't these options.
    So you can edit all the stuff without resampling when using BWAVE. But resampling will happen when you export a final movie.

  • The option to sync apps is no longer available in iTunes, though it used to be. Can anyone tell me how to access the sync apps button please?

    Can anyone tell me how to access the sync apps button please? I used to be able to select it but it is no longer visible.

    You have to connect and select iPhone in computer iTunes Sidebar.
    If you don't see the Sidebar, toggle it on in iTunes menu View > Show Sidebar.
    Take a look at this screenshot on updating apps.

  • Increase in attainable rates and sync speed

    I've noticed that my line is now syncing at 79999 down and 20000up, lasst week, and for the past 6 months the attainable rate has been 60000 down and 15000 up,
    I'm still only getting 71000 down via the bt speedtest and 9000up, getting slightly better results on bbc though.
    Also noticed my latency to the bbc is down from 25ms to 21ms
    have there been any changes to the network or is this the DLM deciding that my line is good enough to handle higher speeds?

    I don't think your line will improve even more, as you are at the limit of your package. 
    If you look at your modem stats you will see both sync rate and max attainable rate.  The max attainable rate will only change significantly if something changes in your line.  The sync rate will change as DLM thinks fit.  If you see your max attainable rate is over around 90000, then maybe you could get more stable sync rate if BT offered a higher level Infinity package.
    DLM will always keep your sync rate below the max attainable for stability.  For reference, my values are a good but not perfect:
    Max: Upstream rate = 23773 Kbps, Downstream rate = 81184 Kbps
    Path: 0, Upstream rate = 20000 Kbps, Downstream rate = 73999 Kbps
    Down Up SNR (dB): 7.9 14.5
    Over the month or so I have been monitoring, my max attainable has dropped slightly, from just over 85000 to values around 82000.  My sync speeds have gone up a lot to reach their current appropriate value, because I had had a previous wiring issue that had lowered my DLM.

  • Continual Drop in Sync Speed

    I have been experiencing a continual drop on sync speed and thus actual line speed over the last few weeks. I had a HH4 replaced aftger teh last one died and since then the line speed seems to be getting slower and slower.
    I am on DSLMax (good old ADSL) and normally sync around 8mb as am very close to the actual exchange - am now down to 6.4mb and am sure it will drop again.
    Normal instructions from the phone support has been applied - reset hub etc.... and has not made a difference...
    Can I ask one of the mod's to try and help out - see why the line is syncing lower than it normally does/has been for the last 3 years....
    thanks
    Pete

    in order for the forum members to help please can you post the adsl stats from your router you may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or if HH4/5 then go to troubleshooting then logs and you are looking for 2 line together when hub last connected to internet and they will show your connection speed and noise margin or if netgear enter 192.168.0.1). Then run  btspeedtester  (MAC users may have problems). when first test completes then run diagnostic test and post the results ( do not reset the router).
    are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
    Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
    Someone may then be able to offer help/assistance/suggestions to your problem
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • How do You Make Accurate Speed Changes To Clips?

    How do you apply a speed change to an audio clip in with frame accuracy? I have 2 audio clips, one from a camera and the other from a cheap solid-state recorder. The latter has audio drift and needs a one-off, constant adjustment to sync it with the camera audio.
    However, FCP only wants to execute clip speed changes down to 1/10th of 1%, which is not small enough. Does anyone know what to do here - either within FCP or Sountrack Pro? Thanks.

    I just know that often when capturing long segments of DV tape for our shows, we occasionally get a clip that comes in at 47.998 or 48.002, instead of the solid 48kHz.
    When I export to aiff, it seems to clear up any sync drifting we experience with the original clips.
    Might give it a go.
    STPro is a solid option as others pointed out. I simply suggested a quick fix to a possible sync/drift issue. (quicker than learning a new interface...though that's something that should be done anyway, for the tools STPro offers).
    K

  • What is sync speed limited by?

    Assuming my line is all ok, what is sync speed limited by?
    The reason i ask is im told my exchange and line is rated for 2 meg (which i was syncing at around 2.5), on sppedtest was getting 2 meg download...so all is looking well...but then randomly one saturday (about 2 weeks ago) i changed over a filter and disconnected the extension wiring, reset the home hub and synced at 3.9 meg, with a nice SNR of 5.9db. Obviously i was well impressed as my speed went up!
    Why was this sync different? As im yet to get anywhere near that again?

    neild7744 wrote:
    Assuming my line is all ok, what is sync speed limited by?
    It's essentially governed by the characteristics of the line. Even if the line is OK, it'll still have properties that could limit the possible speed to an extent. eg lines all attenuate the signal, even good lines.
    There are other factors, "hard" caps for example can be imposed by the hardware, possibly due to the service you're buying. An "up to 8Mbps" service will never go faster than that, even if the line is capable.
    The reason i ask is im told my exchange and line is rated for 2 meg (which i was syncing at around 2.5), on sppedtest was getting 2 meg download...so all is looking well...
    Not really relevant to your question, but...while your line may well be "rated for 2 meg" the exchange will be capable of more than that. If you get anything less, it's due to one of the reasons above.
    but then randomly one saturday (about 2 weeks ago) i changed over a filter and disconnected the extension wiring, reset the home hub and synced at 3.9 meg, with a nice SNR of 5.9db. Obviously i was well impressed as my speed went up!
    Why was this sync different? As im yet to get anywhere near that again?
    On the face of it, it sounds as though either the filter or the extension wiring is causing some noise/interference on the line, which was slowing things down.
    If this behaviour is consistent and repeatable, it should be fairly easy to find and eliminate the cause, which may give a very worthwhile improvement to your speed.

  • Loss of sync speed (over 50%), openreach say line ...

    Hi,
    I hope someone can help!
    For the last 24 months my sync speed has been a consistent and stable 7000+ so my BRAS profile was 6500.
    Last weekend the connection dropped and now will not sync any faster than ~3000, so half the usual speed, well actually less because my BRAS is now 2500
    I have checked all ADSL filters, connected the ADSL router directly to the master socket removing face place to disconnect the extension wiring, tried a different and known working router - another home hub and a Cisco, etc etc smae results.
    The SNR on the line is unchanged at 35dB as previously be good for 7000+, so I can't understand why my sync is now 3000
    At a sync of 3000 the SNR is 6dB (previously 7000 sync @ 6dB) which would suggest the line
    is noiser than before, although no additional noise is heard on the voice line.
    Openreach have been to visit - the line passed all of their tests. The openreach engineer also could not sync faster than ~3000.
    He went to the exchange and redid the wiring to the DLSAM - no speed improvement.
    He called me from the exchange and said that the DLSAM is "sending to me @ 7.2" - so I thought great, he's sorted it, then he told me no it would not be any better as "the line loses 1 meg for each km" .... so we entered a bit of dialogue about how the line could not be synced @7.x at the exchange end and 3.x at my end,  about line sync, DMT tones etc etc I think I was going over his head! He then went on about maybe it's slower because there are now more users on the exchange - again I explained about how the contention actually works on the VC to the BT core, not by BT Wholesale decreasing sync speed on the DSLAM sync... again going over his head....
    So basically he thinks it's fine as the line tested ok and I doubt I'll get any further change.
    Now here is the strange thing -
    ...it was only after the call that I realised that he'd have no visibility of the sync speed on the DSLAM so when he said it's "sending to me at 7.2" he meant that he was plugged directly into the DSLAM port with his portable tester... Now he should be syncing @ 8Meg when connected directly to the DSLAM in the exchange, so it must be a fault on the DSLAM port / profile?
    How do I go about getting BT wholesale to move me to a different port? Not only has my speed decreased but I get random re-syncs.
    Please help!!! :-)
    Cheers
    Matt
    PS provider is BT Total Broadband

    Here's the other strange thing - I just reset the line to clear the stats, and made sure no other PCs were connected, i.e no significant volume of data being send/received, and in 5 minutes I have 160,000 FEC/Interleave errors - that's not right surely?
    ADSL line status
    Connection information
    Line state
    Connected
    Connection time
    0 days, 0:05:17
    Downstream
    3,392 Kbps
    Upstream
    448 Kbps
    ADSL settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.1
    Latency type
    Interleaved
    Noise margin (Down/Up)
    5.9 dB / 22.0 dB
    Line attenuation (Down/Up)
    36.0 dB / 21.0 dB
    Output power (Down/Up)
    19.5 dBm / 11.8 dBm
    Loss of Framing (Local)
    64
    Loss of Signal (Local)
    11
    Loss of Power (Local)
    0
    FEC Errors (Down/Up)
    165234 / 2
    CRC Errors (Down/Up)
    217 / 2147480000
    HEC Errors (Down/Up)
    nil / 0
    Error Seconds (Local)
    685

  • HT1338 how can I improve the speed of my Macbook?  It's become incredibly slow...

    how can I improve the speed of my Macbook?  It's become incredibly slow...

    Hi,
    Troubleshooting Steps are... Restart...  Reset...  Restore from Backup...  Restore as New...
    Try a Reset of the Phone... You will Not Lose Any Data...
    Turn the Phone Off...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    The Apple logo will Appear and then Disappear...
    Usually takes about 10 - 15 Seconds...
    Turn the Phone On...
    If that does not help... See Here:
    http://support.apple.com/kb/HT1414
    iPhone User Guide
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    iPhone Syncing
    http://www.apple.com/support/iphone/syncing/

  • TS3999 how can I stop syncing my outlook calendar with icloud and not loose the existing calandar data in outlook?  the calendar data which downloads to outlook, was also wiped off the gmail calendar after the icloud sync , how can I restore the data to g

    How can I stop syncing my outlook calendar with iCloud and not lose the existing calendar data in outlook?  The calendar data which downloads to Outlook was also wiped off the Gmail calendar after the iCloud sync, how can I restore the data to Gmail?

    same issue, looks like nobody answered you from last JULY....

  • ATV sync speed super stupid slow.

    How quickly does it take you to sync one 45 minute TV show from your ATV to your computer? Mine takes me about 45 minutes. Is this normal? If not, how can i speed this up? I have a wireless Linksys router that hasn't been slow transferring files from my MBP to my G5, or any other capacity. If it is the ATV, why does the sync speed blow?

    Well, it's new in that it's always been this way since i bought it new. It's just always seemed slow. It took about 2 hours to sync 8 shows from X-Files Season 2 last night. That works out to being about 2.5 GB, but that STILL seems super slow for this network. I have no issues streaming, so i wonder if this length is supposed to happen.
    Now, just to be clear, i have a wireless Linksys router (WRT54G V8). I'm pretty savvy re: computers, but i'm a bit weak on networks, so it might not be optimized. I know sometimes my handheld phone can interfere with me streaming to my airport, but only when it is in use.
    Otherwise, the router is hardwired to a Comcast modem. Thoughts?

Maybe you are looking for