How to look for kMAT material in Testing client?

Hi PP members:
How to look for KMAT material in Test client,
Note: I went to mm60 and entered material type: KMAT it did not populate any
materials
Is there any way where I can find the materials, If yes please let me know
thanks
Suren

Hi Saritha:
When I went to SE16, and entered MTART as KMAT it giving the following
It is replying me back "No table entries found for specified key"
Also want to bring to your kind attention I left MATNR field blank as I donot know
the VC materials
thanks

Similar Messages

  • How to look for the Table Name

    Hi Friends,
    Sometimes we need to download the table for the desired information if the same is not available from a particular report. How to look for the table name? Is there a report or a particular feild, where we can find the name of the particular table?
    Thanks for the assistance.
    Regards

    Hi Friend,
    If you want to see the structures then go to SE11. Sometimes it happens that you cannot find the table names but only fields. In such case, if you want to find the Table names which is not available, then go to SE90.
    Abap Dictionary > Fields > Table Fields.
    Now Enter the Field name in Right Hand Side of the screen then Execute. You will see the all tables by which that Fields are used.
    Regards,
    Jigar

  • How  to  look for  fi doc  number in cj88

    HI  expert:
          when I  run cj88.   the system generate FI  doc number.   how to look for FI doc number.
    can you tell me !
    thank you !!!!

    Hi,
    You can see the FI Doc. thru' given instruction
    Go to T-code CJI3 then fillup the WBS no. in which you want to see the Settlement document.
    Execute then filter up document type AA  double click on this & click on FI document.
    Hope it will solve your problem.
    Regards,
    Vishal Kr. Sharma

  • How to look for business partner number in GTS

    Hi Experts,
    How to look for the business partner number in GTS when we have the Customer Id number in r/3?
    Please let me know the path in GTS.
    Edited by: Anurag87 on Dec 9, 2010 2:17 PM

    Hello,
    just simple in GTS in transaction BP find by "3 External number" (which is yours R/3 number).
    Or in se16 table /SAPSLL/PNTBP type in field BPVSY you external number from R/3 system.
    Cheers,
    Gabriel.

  • How to look for a keyword in SAP MaxDB Library 7.6

    Hi,
    how to look for a keyword in SAP MaxDB Library 7.6 ( http://maxdb.sap.com/doc/7_6/7e/c3fb0e72fcf84580f7ee9fcec672b7/frameset.htm)
    Thank you.

    http://maxdb.sap.com/documentation/
    =>
    Section u201CDownloadu201D - HTMLHelp file < 7.8 or 7.7 version >
    HTMLHelp file
    .chm, full text search, print-optimized, 6.3 MB
    < download it or open it >
    < If downloaded, Then start on your server:
           maxdb-chmdoc-en-78_740.chm   >
    and type a keyword in field u201CType in the keyword find:u201D and search.
    Itu2019s working fine.
    Regards, Natalia Khlopina

  • How to look for sales order number if I know outbound delivery number?

    How to look for sales order number if I know outbound delivery number?

    Hi ,
        If you want to see the Sales order Number from Outbound delivery or invoice,go to their respective T-codes,say for example,
    for delivery,Goto Tcode: VL02N / VL03N.There you will find Document Flow Icon,click on that,or press F7.
    You will get a window,there you can see the Sales order Number before your outbound delivery Number
    With Thanks and Regards,
    Priya

  • How to look for spaces in an extract file in order to trigger a MOVE_IT rule

    In studio I am defining a variable field on a section and I want to pull information from my extract file using a simple MOVE_IT rule. 
    I am trying to pull information from a record that has spaces in columns 10-14.  How do I enter the information required in the DATA field to request this? 
    For example, if I was pulling the information from a record that had "XXXXX" in column 10-14 I know the DATA field would be 10,XXXXX
    I cant seem to figure out how to look for spaces at a particular offset.
    Thanks.

    Using XPath to locate the elements you are after is very easy.
    Try something like this:
    import java.io.File;
    import javax.xml.parsers.DocumentBuilderFactory;
    import javax.xml.transform.Transformer;
    import javax.xml.transform.TransformerFactory;
    import javax.xml.transform.dom.DOMSource;
    import javax.xml.transform.stream.StreamResult;
    import javax.xml.xpath.XPath;
    import javax.xml.xpath.XPathConstants;
    import javax.xml.xpath.XPathFactory;
    import org.w3c.dom.Document;
    import org.w3c.dom.NodeList;
    import org.xml.sax.InputSource;
    public class BasicXMLReplaceWithDOM4J {
         static String inputFile = "C:/student.xml";
         static String outputFile = "C:/studentRenamed.xml";
         public static void main(String[] args) throws Exception {
              // Read xml and build a DOM document
              Document doc = DocumentBuilderFactory.newInstance()
                        .newDocumentBuilder().parse(new InputSource(inputFile));
              // Use XPath to find all nodes where student is named 'Suresh'
              XPath xpath = XPathFactory.newInstance().newXPath();
              NodeList nodes = (NodeList)xpath
                   .evaluate("//stud_name[text()='Suresh']", doc, XPathConstants.NODESET);
              // Rename these nodes
              for (int idx = 0; idx < nodes.getLength(); idx++) {
                   nodes.item(idx).setTextContent("Suresh-Renamed");
              // Write the DOM document to the file
              Transformer xformer = TransformerFactory.newInstance().newTransformer();
              xformer.transform(new DOMSource(doc), new StreamResult(new File(outputFile)));
    }- Roy

  • I'm looking for study material "ACI for System Engineers (ACISE)" 700-702

    Hi there
    It seems that Cisco is falling behind schedule.
    Currently I'm looking for study material for the 700-702 certification "ACI for System Engineers (ACISE)".
    Unfortunately the only thing I can find is an instructor lead "boot camp" in Bloomington, MN.
    Since I'm not interested in brain dumps from pass4sure or similar sources, can anybody help me with any other resource - boot camp, book, online training?
    Thank you

    Here is just a few.  I hope it helps
    Policy Driven Data Center with ACI, The: Architecture, Concepts, and Methodology
    http://www.ciscopress.com/store/policy-driven-data-center-with-aci-architecture-concepts-9781587144905
    Troubleshooting Cisco Application Centric Infrastructure
    https://github.com/datacenter/aci-troubleshooting-book
    https://aci-troubleshooting-book.readthedocs.org/en/latest/
    The Operations Guide should be released this summer
    http://www.virtualizationadmin.com/blogs/malhoit/news/cisco-sets-aci-release-date-july-31st.html
    Operating Cisco Application Centric Infrastructure
    http://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/Cisco_OperatingApplicationCentricInfrastructure.pdf
    Where to go for Cisco ACI Information
    http://adaptingit.com/where-to-go-for-cisco-aci-information/
    Cisco Application Centric Infrastructure Fundamentals
    http://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/aci-fundamentals/b_ACI-Fundamentals.html
    Cisco APIC Getting Started Guide
    http://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/getting-started/b_APIC_Getting_Started_Guide.html
    Cisco Application Policy Infrastructure Controller (APIC)
    Configuration Examples and TechNotes
    http://www.cisco.com/c/en/us/support/cloud-systems-management/application-policy-infrastructure-controller-apic/products-configuration-examples-list.html

  • Why there iare no accounting views for KMAT material ?

    Hello PP members
    Why there are no accounting views for KMAT material, in a Standard SAP sytem
    Is is because KMAT material cannot be valuated
    Please clarify

    Baskaran, PP consultant, Rajesha:
    Thank you for replies
    Round Robin of discussions
    Valuation is done at quantity / value level (KMAT - No valuation is done at either Qty/value level)
    KMAT is neither valuated or stocked for that plant when GR is done, the only thing it will do update the sales order
    As KMAT is configurable material, the system calcuates the material cost dynamically as per the customer selection
    Accouting view is used to select the correct G/L account during stock postings
    The above can be viewed in OMS2
    Due points have been assigned

  • How to find Materials Variants for KMAT material

    How can I find what are material variants for a given KMAT material, Is there a specific table or
    transaction code from which I can find

    Hi
    In T-code CU44 you can find all the material variants for the K-mat
    Regards
    Brahmaji

  • How to  find a KMAT material, for a given class (class type:300)

    I know the class (class type:300), but I would like to know for which KMAT material is this class is being used. Is there a transaction or table for which I can find

    Hi
    Try the tables KSSK,KLAH. Pass the class value as 300 you wil get all the materials which are assigned to class type 300. you can pass the material to MARA to and filter with material type KMAT.
    Regards
    S.Senthil

  • Looking for automated way to test print PnP printer after install then delete

    At times we test 20 to 30 printers in a day. I am looking for automated ways to increase the efficiency of this. I would like to simply have the printer install using PnP print a test page then delete itself after the test page or on removal. Are there any settings that can be changed on the computer to change the PnP process to make this possible. I am currently trying to learn and understand the Plug and play process so that I may find out how to get started. Any ideas would be greatly appreciated.
    Thanks
    This topic first appeared in the Spiceworks Community

    Chris
    I spent all day Googling and doing side by side comparisons of my old and new systems.
    My display is a Dell U2410. It has several presets, including sRGB and Adobe RGB. I've been using sRGB.
    On my OLD system, (Win XP, PsCS2, DwCS4) there seems to be no distinction between color managed and non color managed apps, even on this wide gamut display. I could capture (digital camera) in Adobe RGB, open and edit in PsCS2, save as .psd, convert to CMYK for print, or convert to sRGB for SFW. All images looked identical and they printed and displayed perfectly. I thought this was normal, and seemed logical. This also seems to be the source of my incorrect assumptions. I was trying to get my new machine to behave like my old one.
    So I get this new machine (Windows 7, PsCS5, DwCS5) and now (still in sRGB display mode) all color managed apps appear de-saturated. Non color managed apps are OK. If I switch the display to Adobe RGB, color managed apps are OK, but non color managed apps are way too saturated. From my investigation, I believe this is normal behavior on a wide gamut display. I've tried changing the Control Panel > Display > Screen Resolution > Advanced settings > Color Management options, but to no avail. Either I'm missing something, or Windows 7 is doing color management differently.
    It seems my only option now is to use Adobe RGB display setting for Ps, etc. and switch to sRGB for Dw and non color managed apps. Or, have 2 separate files for print and web. I've Googled 'til my eyes are numb and still not sure I'm getting this. Any enlightenment would be greatly appreciated.
    Finally, I don't see an edit function here, so I can't remove my previous incorrect reply. Moderator, please feel free to do so.
    Thanks

  • Subcontracting for KMAT material (VC)

    Hi Guru's,
    Can anybody let me know what is the process/config/steps that needs to be done for creating a subcontracting order for the below scenario ?
    We get sales order for a KMAT Material based on the customer configuration. We have Super BOM's. Based on the configuration, the system selects the BOM components. The finished product will be manufactured by the subcontracting vendor. We have to pass the component list (Selected component list for that specific configuration) to the subcontracting vendor through a sub contracting PO, how do we do that ?
    thanks,

    Hi,
    I think its not  possible  (i'm not sure), pls ref my thread ..
    Edited by: Jayakumar Raju A.S on Aug 11, 2009 7:15 PM

  • CIF problem for kmat material

    Hello,
    I am getting following error message ---
    ' NO configuration for  CONFIGURABLE PPDS-PDS DESKTOP_01' while doing CFM2 transction.
    I am working with KMAT ,material with PDS.
    kmat material is DESKTOP_01.
    We are constructing this scenario.
    Please let me know the solution.
    Regards,
    Ravindra

    Hello Uma Maheshwar,
    Thank you for your answer.
    I have not done the configuration specified by you.
    I will do the same.
    Please let me know ,
    If I am using two classes,
    class 300 for parent kmat material and class 001 for the child materials.
    Please let me know how can we do the CIF ?
    What care must be taken by the doing the cif for materials.
    Waiting for your reply.
    Regards,
    Ravindra

  • How to look for a certain value in a database using sql

    Hello everyone. How do you do this in SQL? Or, is there a way to look for a certain value in a database? What I'm trying to do is this:
    I want to look for the exact value "abcdefg" in the database so that oracle will return me details on the following that contains the said value:
    1. the name of the table(s)
    2. the column/field name(s)
    Note: "abcdefg" could exist in different tables with different column names with different data types.
    Any help is much appreciated. Thanks.
    UPDATE: What about if I just want to check those fields/columns with string data types?
    Message was edited by:
    dongzky
    Message was edited by:
    dongzky

    Just a teeny tweek
    DECLARE
       l_dummy   VARCHAR2 (4000);
    BEGIN
       FOR rec IN (SELECT table_name
                     FROM all_tables)
       LOOP
          FOR rec2 IN (SELECT column_name
                         FROM user_tab_cols
                        WHERE table_name = rec.table_name)
          LOOP
             BEGIN
                EXECUTE IMMEDIATE    'select 1 from '
                                  || rec.table_name
                            || ' where to_char('
    || rec2.column_name
    || ') = ''CAS'' and rownum = 1'
                             INTO l_dummy;
                DBMS_OUTPUT.PUT_LINE (rec.table_name || ' ' || rec2.column_name);
             EXCEPTION
                WHEN NO_DATA_FOUND
                THEN
                   NULL;
             END;
          END LOOP;
       END LOOP;
    END;

Maybe you are looking for