How to mail a report from oracle form
Hi,
I have a form which call a report and report should mail to sender.
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,MAIL);
But where to give sender mail id, I don't know.
Can anybody help me...
Thanks in advance
Hi Francois,
Refer above documentation.
Destype = mail
desname =receiver emailid
replyto = sender emailid
configure smtp server still unable to send mail.
Giving Following error:
Rep-57054: inprocess job terminated. Report generated sucessfully but distribution to destination failed.
Rep-50159: Report generated sucessfully but distribution to destination failed.
Rep-50152: Destination Id failed with an error occurred while sending mail No receipent address.
Similar Messages
-
How to invoke crystal reports from Oracle forms 11g R2 along with passing p
How to invoke crystal reports from Oracle forms 11g R2 along with passing parameter to it.
how to pass parameters to crystal report, please help.how to pass parameters to crystal report, please help.This would entirely depend on crystal reports and you might find informations on crystal reports related communities more likely...I for one have seen crystal reports the last time about 12 years ago. And even back then I simply acknowledged it's existence instead of working with it.
Maybe crystal reports can be invoked via a URL call which would make it simple as you'd need simply build an URL and show the report using web.show_document. But that's pure speculation. Also you might not be the first with this requirement, so the solution to your problem might be right under your nose and just a little google search away ;)
cheers -
How to print BIP reports from Oracle Forms?
Hi all,
I have a question in regards to printing BIP reports from Oracle Forms... We are aiming for a server installation of BIP with integration to Oracle Forms using SSO to handle security. We use Forms built-in web.show_document to render and view the report in PDF/Excel etc... We would like to by pass the viewing and print some of these reports directly to the printer.
Any idea/suggestions how we can go about this?
Thanks in advance for your time.
YahyaYahya,
via HTTP it's not possible to send a report directly to the printer. You had to go via the Scheduler, which is able to do that. With the WebService API you can call a report with the Scheduler and Execute Immediate.
Regards
Rainer -
Calling a report from oracle form 10g
how to call a report from oracle form 10g
Please see the link:
http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf -
How to run a report from oracle 10g form in .csv format
dear all,
how to run a report from oracle 10g form in .csv format? i've already run in pdf & excel format.
i'm using
SET_REPORT_OBJECT_PROPERTY (ro_report_id, report_desformat, 'PDF'); --for pdf
SET_REPORT_OBJECT_PROPERTY (ro_report_id, report_desformat, 'SPREADSHEET'); ---for excel
Please Help..i have already tried.
but the report show in htm or html format. that file will not save into csv. please help. -
How to Call a jasper report from Oracle Forms 6i.
Hi
Can anybody tel me how to Call a jasper report from ORacle Forms 6i.
Thanks & Regards
BangoForms 6i client/server? Use the HOST command to call the report. Since a Jasper report is just a call to a url, it will be something like:
v_url := '<your url to the report>';
host ('cmd /c start '||v_url);If it's web Forms 6i it even easier. Just use web.show_document(<url>). -
URGENT!!! calling crystal reports from oracle forms 10g
Is it possible to call crystal reports from oracle forms 10g?
Can someone help to answer how, if there is a solusion, to call crystal reports from oracle forms 10g.
Please provide codes with details showing step by step.
Thankshi
try something like this.
DECLARE
charWinHandle VARCHAR2(50);
numWinHandle NUMBER;
BEGIN Set_Application_Property(Cursor_Style,'BUSY');
charWinHandle := Get_Item_Property('Control.Rep',Window_Handle);
numWinHandle := To_Number(charWinHandle);
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowParentHandle
:= numWinHandle;
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowState := 2;
:Item('CONTROL.CRYSTALREPORT1').OCX.Crystal.Crysta lReport.Connect
:= 'DSN=;UID=' || Get_Application_Property(UserName) ||
';pwd=' || Get_Application_Property(password) || ';dsq=;';
Crystal_CrystalCtrl.ReportFileName( :Item('Control.CrystalReport1').interface,
'C:\Sample_Rep.Rpt' );
Set_Window_Property( Forms_Mdi_Window, Window_State,Maximize );
Set_Window_Property( 'MAIN', Window_State, Maximize );
:reptitle := 'Report Preview Window';
numWinHandle := Crystal_CrystalCtrl.PrintReport( :Item('Control.CrystalReport1').interface );
Set_Application_Property(Cursor_Style,'DEFAULT');
END;NOTE: Change the report name and path according to your required file name and path in
the "Crystal_CrystalCtrl.ReportFileName" method call. Also, the connection string shown
assumes that you will use the current USER and PASSWORD for the Form.
- To make the above Form generic so that you can run any Crystal report from it, then create
a parameter for the report name and pass it to the Form using CALL_FORM from any other Form.
Then just replace the file name with the passed parameter.
-. Run the Form
If its correct/helpful please mark it thanks.
sarah
Edited by: S@R@h on Nov 27, 2009 6:33 AM -
Calling Report from Oracle form 11g
I am new to Forms 11g, trying to call report from Oracle forms 11g .
I want to call report from oracle forms, but its giving error.
Below is the code
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('empreport'); -- report node in forms builder
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, BATCH);
set_report_object_property ( repid, report_filename, 'empreport.rdf' ); -- report name
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'RptSvr'); -- report server name
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if
rep_status = 'FINISHED'
then
WEB.SHOW_DOCUMENT('http://inorasrv-pc:7001/reports/dtd/rwservlet/getjobid='||v_rep||'?server='||'RptSvr','_blank');
else
message ( 'error while running reports-object ' || error_text );
message ( ' ' );
clear_message;
end if;
end;
Above code giving following error :
Unable to connect to report server RptSvr
I think my report servername is wrong
Where to find report server name in 11g.
I am Using weblogic server, so can i give weblogic server name
Thanks in advance.
Edited by: parapr on Aug 17, 2012 1:52 AM
Edited by: parapr on Aug 17, 2012 3:21 AMHi,
You have to have the report server
a. Installed and configured
b. Running.
See
http://docs.oracle.com/cd/E21764_01/bi.1111/b32121/pbr_strt001.htm
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_verify004.htm
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_conf003.htm#i1007341
If you are using rwservlet then you will find the name from the Configuration file referred to in the last link.
Cheers, -
Calling Report From Oracle Forms
Hi
I am calling this one report from oracle forms, I am using global temporary table to run that report. I am first inserting data into the temporary table through oracle form and then i am calling report in that form to view the data in that temporary table. The problem is, we can not view the data of an other session if we are using temporary table. When i call report from that form a new session get created due to which i can not see the data. Is there any method of calling report from oracle form that a same session is used to run the report?
Thanks.As you mention Forms and Reports do not share the database session. I had the same problem and resolved it using record groups and DATA_PARAMETER to transfer data from Forms to Reports. You could also read the Note 110495.1 on Metalink to find useful information regarding this issue.
Adi -
Calling Crystal Reports from Oracle Forms 10G
Hi everyone,
I am trying to call a crystal report from Oracle Forms 10G.
I have a button on my Form which when clicked calls a Crystal Report which the uaser then wants to save as a PDf file.
Can someone please send me the code to do this and also the exact steps that are to be followed.
Thanks
Fm.Hi Andreas,
I am trying to call the crystal report from an Oracle Form using a URL. No batch file is being used here.
I am looking for a peice of code similar to run_product or run_report built in in Oracle which calls an Oracle report from an Oracle Form.
Also I dont want to display the report on a screen or a window in Oracle Forms. I would like it to run just as we run an Oracle Report from an Oracle Form.
Is that possible ? If yes please let me know the steps to do this.
Thanks
Faiz
Edited by: IQ on May 13, 2011 11:38 AM -
Calling reports from oracle forms 9i
Hi
I succeded to call reports from oracle forms but for I have a problem for only one report so I can't call it. this a part of the code I'm using :
declare
pl_id2 ParamList;
pl_name2 VARCHAR2(30) := 'liste2';
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
begin
pl_id2 := get_parameter_list(pl_name2);
if (Id_Null(pl_id2) )THEN
pl_id2 := Create_Parameter_List(pl_name2);
IF NOT Id_Null(pl_id2) THEN
add_parameter(pl_id2,'mois',TEXT_PARAMETER,:mois);
END IF;
end if;
IF NOT Id_Null(pl_id2) THEN
if(:mois is not null) then
v_rep := RUN_REPORT_OBJECT('My_report',pl_id2);
message(v_rep);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver','_blank');
ELSE
message('Error when running report');
END IF;
end;
the problem I've remarqued is that the function message(v_rep) is always returning the value :'repserver_0'.
so when I execute the previous code I'm getting the 2 messages : 'repserver_0' and 'Error when running report'.
Rq: the report my_report is running very well in report builder.
does someone see where is the problem so can help me??
thanx.Hi,
This usually happens when the report fails on the report server. To obtain details on why a particular report has failed, use the showjobs page :
http://server.domain:PORT/reports/rwservlet/showjobs?server=repserver
and check the detailed error occured.
This is logged as Bug:3017948. It is marked to be fixed in version 9.0.4 (Reports 10g) and also has one-off patches for version 9.0.2.3 on Windows platforms. If you need further assistance about patches, please raise a Service Request (SR) with Support via Metalink (http://metalink.oracle.com).
Regards,
-Bulent -
Call Oreacle report from Oracle form
Hi,
I need call a Oracle report from Oracle Form and found the the following procedure from this forum. I have 2 parameters 'start_date' and 'end_date' passing to called report. The following example just have onle parameter
'departmentno' passing. Is that mean I need to call add_parameter twice like the following?
add_parameter(plid, ''start_date' , TEXT_PARAMETER,:control.start_date);
add_parameter(plid, ''end_date' , TEXT_PARAMETER,:control.end_date);
In the following example:
add_parameter(plid, 'departmentno', TEXT_PARAMETER,to_char(:dept.deptno));
Thanks for clarification!!
Michael
PROCEDURE pass_parameter
IS
plid paramlist;
the_param varchar2(15) := 'tmpdata';
BEGIN
plid := get_parameter_list(the_param);
/* check if 'tmpdata' exists */
IF NOT id_null(plid) THEN
destroy_parameter_list(plid);
END IF;
/* if it does destroy it */
plid := create_parameter_list(the_param);
/* create it afresh */
add_parameter(plid, 'departmentno', TEXT_PARAMETER,to_char(:dept.deptno));
/* associate the param in the form with the param in the report */
add_Parameter(plid, 'PARAMFORM', TEXT_PARAMETER, 'NO');
/* to suppress the parameter form displaying */
run_product(REPORTS, /* product name */
'formrep.rdf', /* Oracle Reports module */
SYNCHRONOUS, /* communication mode */
RUNTIME, /* execution mode */
FILESYSTEM, /* location of the Reports module */
plid, /* handle to the parameter list */
null
END;this my code on when_button_press
declare
rec_grp recordgroup;
col1 groupcolumn;
col2 groupcolumn;
col3 groupcolumn;
col4 groupcolumn;
col5 groupcolumn;
col6 groupcolumn;
col7 groupcolumn;
col8 groupcolumn;
pl_id paramlist;
i number :=1;
begin
rec_grp := find_group('emp_rec');
if not id_null(rec_grp) then
delete_group(rec_grp);
end if;
rec_grp := create_group('emp_rec');
col1 := add_group_column('emp_rec','Empno',CHAR_COLUMN,8);
col2 := add_group_column('emp_rec','Ename',CHAR_COLUMN,30);
col3 := add_group_column('emp_rec','job',CHAR_COLUMN,15);
col4 := add_group_column('emp_rec','Mgr',CHAR_COLUMN,8);
col5 := add_group_column('emp_rec','Hiredate',DATE_COLUMN,10);
col6 := add_group_column('emp_rec','Sal',CHAR_COLUMN,10);
col7 := add_group_column('emp_rec','comm',CHAR_COLUMN,10);
col8 := add_group_column('emp_rec','Deptno',CHAR_COLUMN,4);
loop
go_block('emp_r');
go_record(i);
add_group_row(rec_grp,i);
set_group_char_cell('emp_rec.empno',i,:emp_r.empno);
set_group_char_cell('emp_rec.ename',i,:emp_r.ename);
set_group_char_cell('emp_rec.job',i,:emp_r.job);
set_group_char_cell('emp_rec.mgr',i,:emp_r.mgr);
set_group_date_cell('emp_rec.Hiredate',i,:emp_r.Hiredate);
set_group_char_cell('emp_rec.sal',i,:emp_r.sal);
set_group_char_cell('emp_rec.comm',i,:emp_r.comm);
set_group_char_cell('emp_rec.deptno',i,:emp_r.deptno);
i := i + 1;
exit when :system.last_record='TRUE';
end loop;
pl_id := get_parameter_list('para1');
if not id_null(pl_id) then
destroy_parameter_list(pl_id);
end if;
pl_id := create_parameter_list('para1');
add_parameter(pl_id,'Q_EMP',DATA_PARAMETER,'emp_rec');
add_parameter(pl_id,'paramform',text_parameter,'no');
run_product(REPORTS,'D:\ora\daily.RDF',synchronous,runtime,filesystem,pl_id,NULL);
end;
---------and this is my reprot query----------
select Empno,Ename,Job,Mgr,Hiredate,Sal,Comm,Deptno
from emp
where empno=:emp_rec
order by empno;
but it show error at run time
Rep-1340
plzz solve this problem to me
fahad -
Is it possible to call a Crystal Report from Oracle Forms.
Hi Everybody,
I got a Dout about Crystal Reports. Is it possible to call Crystal Reports from Oracle Forms.Hello,
That depends are you running Forms via the WEB or client/server. I will assume you are running client/server since you are running crystal reports. The answer is yes. All you will have to do is use the HOST command or the win_api_shell to run the report. Look in the Forms manual for information on the commands and what else you may need.
John -
How to run batch file from oracle forms 9i
Hi everyone.
i have a data in csv file. i want to upload it to my database. i am using sql loader for it.
i have made a batch file which run the sql loader and transfer my data to database.
How to run batch file from oracle forms 9i.
when i press the button, nothing uploads in my database. (when i simply run the batch file it works).
here is my code
Begin
HOST('C:\temp\batchfile.bat');
message('done');
end;
Thanks in advance
regards
sajidthis is my log file, when i run manually.
SQL*Loader: Release 10.2.0.1.0 - Production on Thu Jul 1 23:27:53 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Control File: file_to_upload.ctl
There are 2 data files:
Data File: sk.csv
Bad File: sk.bad
Discard File: none specified
(Allow all discards)
Data File: sk1.csv
Bad File: sk1.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table KHAN, loaded from every logical record.
Insert option in effect for this table: APPEND
Column Name Position Len Term Encl Datatype
SR FIRST * , O(") CHARACTER
DATES NEXT * , O(") CHARACTER
AGENT NEXT * , O(") CHARACTER
COUNTRY NEXT * , O(") CHARACTER
TRANSACTIONS NEXT * , O(") CHARACTER
PKR NEXT * , O(") CHARACTER
USD NEXT * , O(") CHARACTER
BANK NEXT * , O(") CHARACTER
Table KHAN:
11088 Rows successfully loaded.
0 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array: 132096 bytes(64 rows)
Read buffer bytes: 1048576
Total logical records skipped: 0
Total logical records read: 11088
Total logical records rejected: 0
Total logical records discarded: 0
Run began on Thu Jul 01 23:27:53 2010
Run ended on Thu Jul 01 23:27:54 2010
Elapsed time was: 00:00:00.63
CPU time was: 00:00:00.17 -
How to run an XML Report from Oracle Forms 10G
Hello Friends,
I am in need of showing a xml report output through a button press trigger in Oracle Forms10G.
I have designed the report in XML Publisher and the report looks fine.I found few scripts useful in running the Oracle Report from Oracle forms10G like Run_Report_Object.But I am not aware of any script that could run a XML report and show the output directly from a Form.
All I want is to run a XML report from an Oracle Form with a button press trigger and show the output in an html version.
Can this be achieved?
If so, Kindly advise as this is an immediate work.
Regards,
Badrul.Hi,
If I am not wrong the XML publisher is same as BI publisher ...
There is one document which explains how to integrate using web service
You want to check this
http://www.oracle.com/technology/products/xml-publisher/docs/Forms_BIP_v22.pdf
or you can also try web.show_document ..
Maybe you are looking for
-
Horrible Adobe Chat Experience - How to open Canon 6D Raw files in CS5?
Hi, I just had an awful Adobe Chat experience with agent Dharma. I waited a very long time and when Mr. Dharma finally was able to help me, he wasn't able to. I was told that my product would no longer be supported and I couldn't be helped by Adobe b
-
How can I include merged projects in the printed documentation?
I have a master project with several merged projects. This works splendid with online documentation, but when I am asked to provide a printed version, it seems I have to create separate documents for each merged project. Is there any setting or fix t
-
Function module import parameter
I had used a bapi in the program and i got a dump. then i recetified the dump. But kindly tell me the reason . My program is like this.. Report xyz. DATA wa_bapireturn TYPE bapireturn. DATA it_bapireturn LIKE TABLE OF wa_bapireturn. DATA wa_bapisdst
-
all top of key board works but not right. f1 f2 f3 f4 etc... comands the computer but not i tunes
-
Hi, I want to see a report on how much amount was booked using a certain material. We are using ECC 5.0. Is there a way to do that? Thanks, N All answers will be rewarded points!