How to maintain (or change) cost centers and maintain account

Hi everyone.
I have a problem which seems to be hard to solve. I have some
purchases which should be distributed on quantity or percentage basis.
Although these purchases are bought on a regular basis their
distribution on cost centers differs from time to time. so, I want to
make these purchases with scheduling agreements and maintain their
cost centers distribution in goods receipt (migo). I know that these
kind of distributions in receipts can be made in service purchases but
with services it's not possible to make scheduling agreements.
any help will be highly appreciated. thanks in advance.

Hi Cemal,
Create PO with account assignment category K & in account assignment tab select distribution on quantity basis or on percentage basis.
Here you can define the percentage for multiple account assignment.
Even though you can change the ratio at the time of service entry sheet also.
Hope it will help you.
Regards,
Manish

Similar Messages

  • Cost centers and profit centers mapping

    Hi Friends,
    I'm through with defining cost and profit centers. How do I map the cost centers and profit centers. I've gone ahead and assigned the cost elements to cost centers in OKB9, giving 2-Business area mandatory.
    I'm just done with defining the profit centers, but i dont have an idea how do I map the profit centers.
    pls suggest.
    regards
    Pallavi

    found it

  • How to extract cost centers and their number of appendant assets to internal table?

    Hello,
    my aim is to get an internal table with all my selected cost centers and the number of their appendant assets to pass this to a SmartForm.
    The result would be something like:
    cost center
    number of assets
    100000
    65
    100001
    13
    100002
    105
    100007
    3
    100008
    57
    What I did so far: I made up an SQL statement, which I tested in the transaction DBACOCKPIT (Performance -> Additional Functions -> SQL Command Editor), which works fine and gives me exactly what I need.
    The SQL statement is (slightly simplified, and exemplarily only for costcenters 100000 and 100001):
    select costcenter, count( assetnr ) as numberofassets from
         ( select anlz.kostlv as costcenter, anla.anln1 as assetnr, anla.deakt, anla.aktiv from anla
              join anlz on anla.mandt = anlz.mandt and anla.bukrs = anlz.bukrs and anla.anln1 = anlz.anln1
              where anlz.kostlv = '0000100000' or anlz.kostlv = '00000100001' )
    group by costcenter
    Now, I want this SQL statement to work in my ABAP code. To match the requirements of the ABAP Editor (SE80), I
    - replaced all the point delimiters (.) by a tilde (~),
    - removed all commas,
    - added "into costcenter_assetcount" to store my result in an internal table.
    So in my ABAP code the SQL looks like this (alias assetnr inb the first line is printed in red):
    select costcenter count( assetnr ) as numberofassets from
       ( select anlz~kostlv as costcenter anla~anln1 as assetnr anla~deakt anla~aktiv from anla
           join anlz
             on anla~mandt = anlz~mandt
             and anla~bukrs = anlz~bukrs
             and anla~anln1 = anlz~anln1
           where anlz~kostlv = '0000100000' or anlz~kostlv = '00000100001' )
        into costcenter_assetcount
    group by costcenter
    Checking my code, ABAP Editor gives me a syntax error pointing to the SELECT of the subquery (it's in German, because this is my default language setting). After my first FROM, ABAP seems to expect a table name instead of a subquery.
    Programm Z_FIAA_ASSETCOUNT        @0A\QFehler@
    "SELECT" ist im ABAP-Dictionary nicht als Tabelle, Projektions- oder     
    Datenbank-View deklariert.
    Isn't it possible to use a SELECT subquery after my FROM in the ABAP Editor?
    What would be the best practice to put the data in an internal table?
    Looking forward to your comments!

    Hi,
    I think, You make it to complicated, try this:
    select anlz~kostlv as costcenter count( distinct anla~anln1 ) as numberofassets
       from anla
            join anlz
              on anla~mandt = anlz~mandt
              and anla~bukrs = anlz~bukrs
              and anla~anln1 = anlz~anln1
            where anlz~kostlv = '0000100000' or anlz~kostlv = '00000100001'
       group by anlz~kostlv.
    Jarek

  • Is it possible multiple line items debit & single line item credit and different cost centers and different profit centers in fbcj

    Hi all ,
    I have a requirement to Post Cash Journal Document using FBCJ tcode.
    Is it possible multiple line items debit & single line item credit and different cost centers and different profit centers
    for exp:
    pk   GL a/c   description       amount   cost center  profit center
    40  400101  telephone exp   500        1403            P 1000
    40  400101  telephone exp    100       1404            P 2000
    50  200100  cash in hand      600-                             
       This is My requirement  is it possible in fbcj
        Please suggest me.ASAP.
    Regards
       Naresh.

    Hi,
      This you can do it in two ways:
    1. Make three header under top level....one Product A, 2nd Product B ( as Billing element) and third as Common expense ( only cost). Now 1st & 2 nd WBS, you have to have sales order linking with individual lint item, for third you will accumulate all the common expense till the period end then make a reposting of the same in desired proportion to both products WBS hierarchy
    (This is if you want to have a track on the common expense as well.......like planning, budgeting & control)
    After this reposting, run RA for individual billing element and hence you will all the complement detailing and control over Revenue and expense with respect to Product A and Product B individually.
    2. If you don't want to maintain that kind of detailing the common expense and keep track of it through project, then have cost centers accordingly and make an assesment/ distribution with respect to expenses accumulated at those cost centers for the period to the respective WBS under each product. Then execute the period end processes for the project.
    Or
    You can try with have two more line items in the costing sheet as an overhead against common expenses with respect each product.
    I hope this should help you.
    Regards
    Avisek Bhardwaj

  • Link beteen cost centers and activities

    Hi
    We have 180 + cost centers and I want to have 100 + activities.. I want to link these cost centers & activities..Eventually what should happen is when processing transactions with a CO object (cost center, internal order, WBS) in AP posting, recurring entry, depreciation, PO ect the value should also hit the activities at the time it hitting the cost center
    I just want to know whether a link can be maintained in the cost center master data to link an activity..
    Thanks

    HI,
    the linkage of cost centers and activity types is done in cost center / act. type master data using the field "cost center category". if you set cost center category to "X" in the cost center, the cost center can only "use" act. types with cost center category "X" (or * which is a wildcard).
    In act. type master data you can key in up to 8 different CCtr categories, which allows you to limit activity type "test" to be used for cost center category X and Y and Z.
    The possible combinations can be seen in act.rate planning (kp26). Planning is only possible for the combination of cost center / act. type given by the linkage described above.
    Best regards, Christian

  • Cost Centers and distribution rules

    I need to allocate costs to profit centers and would like to have the costs be allocated first to the department cost center then distributed to product profit center by %.
    Example:  An invoice is first allocated to the sales department, then the distribution rule will allocate the cost between 4 product lines (33 % chemical A, 33 % chemical b, 17 % chemical c and 17 % chemical d).
    How would I setup the profit centers, cost centers and distribution rule to accomplish the above task.
    Thank you,
    Wayne

    Hi Fred,
    I assume you using 8.81?
    1. Administration - General Settings - Cost Accounting : Tick "Use Multidimensions" option
    2. Financial - Cost Accounting - Dimensions : Tick "Dimension 1" and "Dimension 2".
    Give proper description to each dimension, in your case maybe "Department" to Dimension 1 and "Product" to Dimension 2
    3. Financial - Cost Accounting - Cost Centers : Create your intended cost centre, "Sales" cost centre with dimension "Department", "Chemical A" to "Chemical D" with dimension "Product"
    4. Financial - Cost Accounting - Distribution Rules :
    As for your intention to allocate the invoice to Sales Department, since you want to allocate it 100% to Sales Department, you don't need to create a distribution rules, since B1 will automatically create a distribution rule with 100% allocation for each cost centre you created.
    As for your production cost allocation, create a distribution rule with your code "DR-P01" as an example, choose dimension "Product", set the Total with "100". In the detail section, choose each cost centre (Chemical A to D), enter respective value and click "Add" button.

  • Table for Cost Centers and Org Units

    Hi All,
    How to retrieve the list of Cost centers and the associated Organization Units?
    My HR user is in need of such list...
    Can anyone help me out....????
    Regards
    Pavan

    Hi
    I dont think you can associate a cost center with org unit, it is normally associated with position/person.
    You can check table PA0001 to get the cost center and org unit for a personnel number.
    Is this your requirement ?
    Thanks,
    Shrinivas

  • Report of projects across cost centers and vice versa

    Hi friends,
    Do we have any standard report of Projects across Cost Centers and vice versa?
    In our case, it is statistical cost center postings and real project postings. How can we get a standard report of Projects across Cost centers ?
    thanks in advance,
    San

    Refer the thread
    Reports on Statistical WBS
    In the report CJI3- Actual Line Item Report, pull in the field Partner Object in this case it would be Cost Centre (where actuals are posted)
    Regards
    Sreenivas

  • Assignment of cost centers and profit centers

    Hi Friends,
    can anybody give me a series of steps of assignment of cost centers and profit centers, like I know there is a T.code 3KEH, but I really dont know the chronological (step by step) order of steps to be followed to assign the cost centers to profit centers, as profit centers cannot be directly posted to and as the postings.
    And above all when I see the info about 3KEH, it says we need to assign only balance sheet items there and not cost items.
    Basically I've not studied Profit center accounting Properly and so I'm facing this problme
    If there is any documentation on this can anyone pass this on to: kiransandhyaATyahooDOTcom
    regards
    sandhya

    Hi Sridhar,
    Thnx for replying. I've gone ahead and defined cost and profit centers and did what you have told me to. Now this is where I'm stranded. How do I map profit and cost centers so that the we get the right kind of reports.
    Basically, my question would be: say for eg: if we are defining Company, Co.Code, before completing with Global paramters, there are a series of steps that we need to complete, right.
    Like wise, I just wanted to have a series of mandatory steps that I need to follow where the cost centers and profit centers mapping is done, atleast if I have the steps with me then I can go ahead and check the logic as to why should I define a particular step.
    Like I mentioned I happened to see some information about 3KEI, so before going to 3KEI or 3KEH, are there any other steps that I need to follow.
    I need to get the cost center and profit center reports, so that is what I'm looking for, and what do i need to configure, before getting to that point?
    I dont have a great insight into PCA, and I was not a part of the controlling configuration, but because a person has left in between the project, I'm supposed to do this and that is the reason why I dont have much time in doing R&D, and thats the whole reason why I'm seeking inputs which would actually minimise my time of R&D, once I'm able to convince my people, then again I can sit back and try to improvise my self.
    regards
    sandhya

  • How can I change game centre and iCloud account information from previous owner of my iPad?

    How can I change game centre and iCloud account information from previous owner to me?

    You can't do it on your own. The previous owner has to erase the device for you. You would need his Apple ID and password in order to delete his iCloud account. This is due to the Activation Lock in iOS 7 - assuming that your iPad is running iOS 7.
    Contact the owner and ask home to erase it remotely using iCloud, or return the device and ask for your money back. If you can't contact the pervious owner, you will have a useless iPad on your hands.
    Read this for more information. This is what you need the previous owner to do.
    What to do before selling or giving away your iPhone, iPad, or iPod ...

  • How to co-ordinate changes in database and fmx if signature of package is changed?

    hi all,
    A fmx is changes because of change in signature of called procedure? How to ensure coordinated change in database and fmx. Can we manage it in 24X7 running system? how?
    Regards,
    Rajiv

    There is a database parameter that define the dependency model of changes in stored procedures. I don't remember its name though.
    One of its setting will let you run your form without the need to recompile if the stored procedure changed.

  • Cost centers and budgets filtered by functional locations

    Hi All,
    I need report containing cost centers and budgets filtered by functional locations.
    Regards
    Hari

    Hi,
    Please find the logic below & try it at your system-
    Here cost center group is not possible (also i not checked it so do it on your own simultaneously i am trying the same).
    Use Table BSEG-> in bseg give the cost center-> with the help of cost center find the account number (field HKONT)-> take this GL account number & got to table COEP-> in this give the GL account number at field 'offsetting account' (field GKONT) & you will get the line item.
    Try it & let me know if you have any question.
    Thanks

  • Do we have a General Ledger report that combines both cost centers and WBS?

    Do we have a General Ledger report that combines both cost centers and WBS?

    Have you tried FAGLL03

  • Cost Center and GL account in Sales Order / Delivery

    I have a requirement where we want user to specify what cost center and GL account should be used while posting goods issue.
    Currently GL account and Cost Center is automatically determined based on OBYC configuration.
    Is there a way  user can populate Cost center and GL account at Sales order or Delivery document level and what ever they have specified will be used for Posting Goods Issue.
    If user doesnt specify anything then standard OBYC determination should take place.
    I looked at OVF3 transaction which can default cost center (though no GL account) but its not useful in our requirement.
    I also looked at OKB9 transaction but not sure if we can use it either.
    Again we want user to enter Cost center and GL account at either SO or Delivery document level and then that should be used for Post goods issue.
    Thanks in advance.

    Hi,
    In delivery under tab GOODS MOVEMENT DATA
    After valuation type column COST CENTER & G/L Account column available
    Now with the help of FI consultant make it change mode so user can maintain  also I observe that if delivery created without reference to order then that fields are in change mode means user cn maintain data for this but if with reference to order it is disable mode
    Check in t-code OMJJ FIELD SELECTION FOR MOVEMENT TYPE
    Put movement 601
    Then select movement type and double click on filed selection (from 201)
    Then go to additional account assignment and for cost centre make it optional or requirement
    or Else under field selection enjoy for movement type 602 indsert field KONT0 and KOSTL and check
    If this can not work there is option field selection for G/L account check that with FI
    Kapil

  • Combination of cost center and GL account in Report painter report

    Hi Guys,
    Im creating a report for  profit centers using library 0FL- which uses table FAGLFLEXT in the report painter GRR2.I need to enter cost center with gl accounts in the characteristics.as these cost centers
    are assigned with cost elements.Can I do that ? cuz when I enter combination of gl a/c and cost center,I wobn't get nay data but only gl accounts shows the correct data.How to use combination of cost center and gl a/c, or I am good only with gl a/cs.Please suggest.
    Regards
    Shaun

    Hi
    Just check the G/L account assigned in the PO against the cost center, The G/L account assigned may not be the correct one, Check out if any validation is there for the combination, contact your FI-CO guy as there are always restrictions unknown to a MM guy.
    Regards

Maybe you are looking for