How to make a field Mandatory in a Table view?
How to make a field Mandatory in a Table view?
The requirement is, the user should not be able to append a new Row, unless and untill he enteres the data in the column SOLD-TO. Now how do i acheive making this field madatory. Normally in Edit form view, we can go in customizing and flag Mandatory, for table view we don't have this option.
Please can anyone of you guide me in this approach?
Jagadish.G
Hi Jagadish,
have a look in this thread, part of the code you can use in eh_insert method or logic to write enable/disable insert button.
Re: Assignment Block Mandatory
regards
Ismail
Edited by: Ismail Shaik on Oct 21, 2009 11:36 AM
Similar Messages
-
How to make a field mandatory in billing
How to make a field mandatory in billing document,if m right with the help of incomplition log but how.....
plz reply the full configuration.Hi Mohan,
We normally create a billing document with reference any other document say Order or delivery.
so, all the necessary information in the invoice will be taken from preceeding doucments. Thats way in the order level we check for incompletion log. If any important data is missing in the order level then the succeding documents will not be created.
Thats way in the billing documents all the necessary information will come automatically either from preceeding documents or from master data.
Still you want to make any field mandatory, you can do these by modifieing Billing documents user exists,you can make which ever the fields are mandatory and to be checked before saving. so when you are going to save the invoice, it will check if these fields are maintained or not.
Hope this is clear.
Reward if helpful.
Thanks,
Praveen -
How to make all fields mandatory in sales order T- code VA01 initial screen
Dear all,
how to make all fields mandatory in sales order T- code VA01 initial screen itself
The fields are
Sales Organization
Distribution Channel
Division
Sales Office
Sales Group
Regards,
Amar ReddyHi,
You can use Transaction Variant to achieve this functionality.Please go through the following link which helps you in creating the same.
[Link|http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation]
Regards,
Phani Prasad -
How to make extended field mandatory in Master Agreement
Hello All,
I am new to SAP CLM, and I have requirement where one extended field in master agreement needs to be made as mandatory field.
I tried in extension definition but check box to make it required is disabled and I am unable to find other way to do it.
Can some one help me and Please let me know how make extended fields mandatory in CLM.
Regards,
PrabhatHi
This could be achieved using Page Customization.Go to Setup-> User Interface-> Page Customization, open master agreement object (create new with UI ID:contracts.contract.ui.buyside.default if doesn't exist ) and add a new customization for extended field with Property set to Required.
Regards
Mudit Saini -
How to make some fields mandatory for a custom screen we have added
Hi All,
Please let me know how can I make some fields mandatory through coding in PBO for only some fields of a screen.
Say if I have 4 fields in my screen(module pool not selection screen) i want to make mandatory 2 fields based on some conditions how to do this? I tried using screen-group but this will make mandatory all the fields of that screen mandatory.
I want only specific fields based on condition in run time.
Regards
MaheshHi Mahesh,
Try this ..
Assign the same group to those fields , say GRP
in PAI
IF <CONDITION>
Loop at screen.
if screen-group1 = 'GRP'.
screen-required = '1'.
modify screen.
endif.
endloop.
ENDIF. -
How to make a field mandatory in SAP Business one ?
How to make a text field mandatory in SAP Business one?
hi nishant,
check this link
Making fields mandatory
To Set Mandatory Fields in Documents
Jeyakanthan -
How to make Required Fields in WDA Dynamic Table
Hello all,
I have a WDA Dynamic Table and want to make some fields as mandatory fields.
can you please show me how to do this?
thank you very muchHi,
Write the below code:
DATA: lr_table type ref to cl_wd_table,
lr_table_column type ref to cl_wd_table_column,
lr_input type ref to cl_wd_input_field.
lr_table ?= view->get_element( id = 'TABLE' ). " TABLE id ID of Table UI
* Get column
lr_table_column ?= lr_table->get_grouped_column( id = 'TABLE_COL' ). TABLE_COL is the ID of table Column
*Get Cell Editor
lr_input ?= lr_table_column->get_table_cell_editor( ).
*Set Required
lr_input->set_state( cl_wd_input_field=>e_state-required ).
hope this helps u,
Regards,
Kiran -
How to make some fields mandatory based on radio button selected
Hi,
As per requirement i have two radio buttons in my screen.
1.update
2.Display.
When the user clicks update then certain fields of selection screen should be made mandatory.
And if the user cliks the Display Radio Button then certain fields should be made mandatory.
How to code for it.
Thanks and Regards,
SmritiHi ,
use this code ,
now according to your requirement you make changes to your parameters.
parameters: r1 as radiobutton group g1, " this id you update button
r2 as radiobutton group g1. " this is for display
PARAMETERS: TEST1(10) MODIF ID SC1, " assume these are the fields as parameters.
TEST2(10) MODIF ID SC2,
TEST3(10) MODIF ID SC1,
TEST4(10) MODIF ID SC2.
AT SELECTION-SCREEN OUTPUT.
if g1 = 'X'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'SC1'.
SCREEN-INTENSIFIED = '1'.
MODIFY SCREEN.
CONTINUE.
ENDIF.
IF SCREEN-GROUP1 = 'SC2'.
SCREEN-INTENSIFIED = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
elseif g2 = 'X'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'SC1'.
SCREEN-INTENSIFIED = '1'.
MODIFY SCREEN.
CONTINUE.
ENDIF.
IF SCREEN-GROUP1 = 'SC2'.
SCREEN-INTENSIFIED = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Please let me know if you still need any help.
Thanks and regards,
Rajeshwar -
How to make a field profit center mandatory in sales order?
Dear GURUS,
Please help in getting answer for following question.
How to make a field profit center mandatory in sales order?
With Regards
Sandeep D.Hi,
There are 2 ways to make profit center mandatory
1.Transaction Variant
2.Incompletion procedure
1.Transaction Variant
Step 1:Goto Tcode shd0 and input transaction as va01 and give name of transaction variant as ( example. zva01 ) and click on create or F5
Step 2.Then it takes you to sales order screen.Just click on enter untill you see profit center field.
Step 3.check the box required against profit center.
Step 4.click on save ( under a package name or as local object ) and exit
Step 5.Assign transaction variant to your sales order type through tcode v0v8.
2.Incompletion Procedure
You can add the field table-vbap,field- prctr,status-04,check-warning to your existing incompletion procedure Tcode- ova2 assigned to your order type in tcode vov8 and check the box - incomplete messeges for your order type through tcode vov8.
If incompletion procedure is not assigned to your order type than you have to create a new incompletion procedure and assign it to order type. -
How to Make Assignment field in Details Tab Mandatory in MIRO
Hi Experts,
I would like to know how to make the field "assignment" in Details tab of transaction MIRO as a Mandatory field, Give all the posible ways and their causes and effects.
Thanks In advance.Hi,
check the field statusgroup of the reconcilation account for your vendors and change thisfield status group for the field Assinment to Mandatory.
But make sure that then all your endors haven an sort key in the master data.
Regards, -
How can i make reference field mandatory in MIRO?
Hi Experts,
How can i make reference field mandatory in MIRO screen.
Reference field is not available in field status group.
I have checkedthe reference number in RE document types in OBA7 .
But still without entering anything in reference field in MIRO,the document is getting save.
Any other solution??
Regards,
Sumeya offrinHi
Strange....what you did should work.
Was an accounting document created for this MIRO? Was it RE type?
Ofer -
How to make amount field as mandatory in portal
Hi experts,
We are working on EHP5 , Ecc 6.0. I am working on claims and reimbursements module . We have already done the configurations and in the portal i need to make an amount field as mandatory . I have gone to content administration - Portal Content - Content provided by SAP- End user content - Employee self Service - I views- Benefits and payments - India- Claim Advance request . Here i have selected an iview then Right click on that we can see the properties. there i have made the field as mandatory . It is getting applicable. But when i close the particular screen and click on that iview the same screen comes across with the field not getting mandatory . Wat are the other steps which i need to make this field as mandatory and gets applicalble to all claim types. So please reply .
. So please respond experts.
Thank you
LokeshHello Lokesh,
For all specific claim types while configuring customized header fields in view V_T77WWW_CLHLDC
& configuring customized multiple line fields in view V_T77WWW_CLMLDC there is an option in the form of checkbox to make those fields mandatory.
The mandatory checkbox can be seen inside the box generic properties.
I trust this clarifies.
Regards,
Pankaj -
How to make warehouse field inactive for all users in all documents autom.
Hi All,
Can anyone pls tell me "**how to make warehouse field inactive for all users in all documents without having to do it through form setting** "for each and every user. It should be visible but inactive
Thanks & Regards,
Mukesh AgrawalHi,
As a work around create a warehouse SelectWH and map the mandatory acoounts as a On hold account(in chart of accounts).So there will not be any posting on this account.
And set this warehouse as default warehouse for all users.
So without selecting the appropriate warehouse the user can not add the document.
I think this might resolve you issue. -
How to make Business place mandatory
Hi, SAP Gurus,
How to make business place mandatory in "MIRO ". As i know there are two ways
1) Through Screen Variant T/code: SHD0
2) Validation
But here i Never worked on sreen variant level and validation, I need step by step to make business place mandatory in MIRO
bY USING ABOVE T/CODES,
Regards,
PrabhakarHi Bhanu,
Use T.Code GGB0 - Validation maintenance - Change Validation overview.
Choose Financial Accounting in Application area. Select Line Item and click Validation create icon.
Give a Validation ID BP and text Business Place Mandatory and save.
Click Step icon - Step 01 - now the prerequisites; check and message will come in margin panel.
Give text for the step 01. Click Prerequisites. You can see the Table Fields Structure BKPF, BSEG, and SYST.
If you double click on this you view individual fields relating to these master tables.
Your prerequisite may be like this :
Company Code is = XYZ ; T.Code = MIRO & F-43; Posting key = 31 ( Credit Vendor)
Double click BKPF > double click BKPF-BUKRS> click "=" > click constant > a pop up box will open
here fill up your company Code XYZ. This will automatically come in the top box. Click "AND". Now there is a back arrow
button in the table field panel and come back to the original display of master tables. Here double click SYST
Click SYST-TCODE > click "=" > click Constant > in the pop up box enter tcode MIRO. If you want to add F-43,
you have to click "AND" after this and repeate SYST-TCODE = F-43. Now click back arrow and double click BSEG and
click BSEG-BSCHL > Click "=" > Click Constant > in the popup window enter 31 and save the prerequisites.
(For the above requisites, the system will check if Business Place is 1000 is filled up during transaction and if not it has to
give a error message.)
Now Click Check in the right margin below prerequisites menu. Again the table list will be seen with BKPF, BSEG and SYST
Double click BSEG > click BSEG-BUPLA > Click "=" > Click constant and in the pop up box fill the business place 1000 and save
the check menu.
In the right margin now double click message. Here you can create a message text of your own "Business Place mandatory"
Save the Message and come back and finally save the Validation so created.
Now use T.Code OB28 and enter your Company Code > give call point 2 > and Activation level 1 and save the entries.
Now you can check for the transaction in MIRO where without filling the Business Place field you cannot save the entries.
Hope the above steps will be clear for you. If you have any doubt please revert back.
Best Regards,
Sadashivan -
How to make relationship block mandatory?
Hi,
Please let me know how to make relationship block mandatory to create a business partner?
VinayHi Vinay,
Did you try to set the flag mandatory in the configuration of the relationship view for a field (e.g. relationship).
Just go to the view in the component workbench, select your configuration, mark a field and go to Show Field Properties.
Hope this helps.
Regards, Thea
Maybe you are looking for
-
Migrating from MS SQL Server 2005 database to Oracle 10g
Hello, I wanted the full procedure or steps to Migrate the MS SQL Server 2005 database to Oracle 10g. Is there a known procedure to do this or is there a tool which is used? I have not done migration of database from MS SQL Server to Oracle. Any help
-
I bought my very first iPhone 7 days ago. Thinking this was the best move from the blackberry. hmmmmmmmmm Not seeeming so today!!! I added over 100 phone contacts manually and last night all contacts were gone. My iphone contacts were replaced by my
-
Connecting n96 to WPA Enterprise
Has anyone been able to connect a n96 to WPA Enterprise (TKIP Encryption; PEAP; EAP-MSCHAP v2) WLAN? thanks.
-
I bought photoshop a few years ago and want to download it to my new laptop How do I go about that?
-
Buttons to click (search, go, preview, etc.) not showing
On many, but not all, web sites I can't see the buttons to click. For instance, when I try to purchase something the "add to cart" button doesn't show. Or on a gamesite the 'online games' or 'download games' butons don't show. Yet when I hover the