How to make attachments work in Guided procedures

Hi,
I have created a simple application in GP where there is an input and the same user can see the output.During the process we can see an attachment symbol. when i attach a file and send it the other screen or the other user doesnt recieve that attachment. why is it so..and how can i send attachments during process

Attachments need to be configured at a high enough level that they flow through the process.
See help at: http://help.sap.com/saphelp_nw04s/helpdata/en/de/e4544262fe1f56e10000000a1550b0/frameset.htm
-Cindy

Similar Messages

How to make MDM work?

Hi Guy,
I'm newbie for MDM.I already intalled it on my machine(Window Xp)but dunno how to make it work.
The installed components are MDM/Syndicator/Import server,Console/Import mgr/Data mgr/Syndicator.
Do I have to install any component else?And Can you guy give me any guides/documents/Posts how to make it work.Cause I have to demo it next week but right now still blank about it...
Thanks
Parinya.

Hi Jack,
For Demo Purpose,
1.Create few master records in R/3 Servers [ MM(Tcode MM01) /Employee(PA40) /Vendor(Xk01) /Customer(XD01) according to your MDM Repository(For Example "Products").]
2.Extract those master datas from R/3 Servers.
3. You will get the xml file of master datas.
4.Open the import manager and import the xml file into the MDM server.
5.In Import manager ,you need to map the records[Source Fields(Imported records) VS Destination Fields(MDM repository)].
6.Once you imported the record ,u can see the records in the MDM Data manager.
   We can Create/edit/Delete those records .
   We can merge the records for consolidation purpose.
   We can perform Data enrichments process   like Validation,Workflow,Assignments..etc.
7.Once cleaned the Master records,it is ready to distribute to R/3 servers.
8.Syndicator is used for sending data back to the R/3 servers
   Here also we have to do Mapping against R/3 servers.
   Using XI We can connect the R/3 Servers.
Hope u will understand this.
This is very simple example for MDC-MDH Scenario.
For futher learning on how to create a repository/Enrich the mater datas, go through reference documents in the Service Market place.
Best Regards
Devaraj PK

TS1559 I stop receiving I message in my iPad recently I changed my apple password how can make it work again?

I stop receiving I message in my iPad recently I changed my apple password how can make it work again?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
 Cheers, Tom

How to make isight work with skype

hi
Does anyone Know how to set up the Camera with skype or msn messenger .
I have a Macbook pro with the camera in the top of the Monitor but have no idea how to make it work on any other program except photobooth , it works on ichat but i don't use ichat only Skype or Msn messenger ..
So if anyone can help me getting it to work on those would be great
thanks

Hello Globalmark
For your problem dealing only with Skype, Skype supports their product with a comprehensive Help system for answers to your Skype-specific questions.
If you cannot find the answer you need from their Knowledgebase, Troubleshooter, User Guides, or dedicated Skype-user forum, you can get technical support directly from Skype.
MSN (now Microsoft) Messenger for Mac cannot use ANY camera unless you are using the "corporate" version. The personal version is a text only app.
This post will give you the options available to you for using your MacBook Pro to contact those whose only chat client application is MSN (now Microsoft) Messenger.
Your posted system info shows that you are still using Mac OS X (10.5.1). If that is correct, you may want to consider the advantages of updating to the latest version of Leopard.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
Not necessarily. That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio. You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise.

TS2634 I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

I have the same problem.
Two similar discussions:
https://discussions.apple.com/message/23081658#23081658
https://discussions.apple.com/message/23281391#23281391
I have not yet seen any official response to the question: "Is the Apple AV Composite cable fully supported with 30pin connector devices upgraded with iOS7 - specifically ? - eg. iPad 2, iPhone 4, iPhone 4s"
If it is not currently supported is that then due to a bug / oversight and in that case is it something that will be fixed in the near future?
Please let us know what feedback you got from asking Apple support.

How to make buttons work in Interactive Adobe Forms

Hi Experts,
I am new to interactive form. Though i have worked in normal/non-Interactive form, i do not know how to make buttons work in interactive adobe forms using ABAP (I don't know JAVA). Can any one help me out and walk me through to how to code in ABAP to make buttons work.
Kind Regards,
Sharat.

Please refer to my earlier post ... You will get an idea
Please refer to the below thread for detail solution
Sample Interactive form example ?....urgent...
Cheers
Satya

Deleted itouch files using ifile from cydia. i restarted it but now it shows the apple logo and that is it... it doesnt respond. any ideas of how to make it work?

I restarted my itouch using the home button and top button...it restarted but it only shows the apple logo and that is it. I deleted all files from ifile and then it froze... any ideas of how to make it work again?

Discussions of hacked ipods is not permitted here.

I have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

i have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

Who was your original carrier; did you call them to ask them to unlock your phone, and are you aware of what their unlock policy is (THey may only unlock for international sims and not US sims

HT201343 My mac is OS X 10.6. has not airplay. how to make it work?

My mac is OS X 10.6. has not airplay. How to make it work?

OS 10.6 is Snow Leopard, which does not support Air Play. If you upgrade to OS 10.7 Mountain Lion (which is what you list in your category) then you may be able to use Air Play depending on the age of your computer.
See this document:
http://support.apple.com/kb/HT5404

Today my money is deducted Rs.60 when I try to download paid applications of any amount and I am getting message transaction declined, so why my money is deducted. I lost almost Rs 480 rupees . So how to get refund and how to make card working?

Today my money is deducted Rs.60 when I try to download paid applications of any amount and I am getting message transaction declined, so why my money is deducted. I lost almost Rs 480 rupees . So how to get refund and how to make card working?

Today my money is deducted Rs.60 when I try to download paid applications of any amount and I am getting message transaction declined, so why my money is deducted. I lost almost Rs 480 rupees . So how to get refund and how to make card working?

How to make tablesorter work for GroupedColumns??

Hi all,
I imported the class of TableSorter.java to my project. It automatically picks up my normal columns, they all can be sorted.
but the groupedColumns generated by the drag and drop table node into the design area wont pick up, even i set the property of "onAction" of the column to "Sort"(method) it wont sort the content for me.
how to make it work?
thanks

hi!
you can get lead selection in the action handler then inset your code for currentContextElement.
wdContext.currentContextElement().getTableSorter().sort(wdEvent, wdContext.nodeXXX());
thanks
vishal

How to make rss work

So, I'd like to get RSS working on my iMac. When I click on an RSS logo/button, I get the message "No associated application could be found." HUH??? Any idea on how to make RSS work??? In either Safari or Mail.

RSS has been removed from Mail and Safari in Mountain Lion, so you will need to use a thrd party application such as Vienna.

How to make stylesheets work ???urgent

Hi,
How to make stylesheets work.I tried including the CSS file on the
header
<%@ include file="stylesheets.css" %>
<%@ include file="stylesheets.inc" %>
and both options does not work. can somebody tell me what is wrong here.
Thanks
jack

Hi,
below thing does not work ?? any idea ??
<TITLE>IBMSWG - <%= childCategoryListBean.getCurrentCategory().getName() %></TITLE>
<META NAME="Keywords" CONTENT=" passive, components">
<META NAME="Description" CONTENT=" varistors">
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<link rel="stylesheet" href="stylesheets.css" type="text/css">
<script language="JavaScript">
<!--
function xxx
Thanks
jack

How to make Matlab work after loading Yosemite ?

How to make Matlab work after leading Yosemite on a Macbook pro ?

R2014b should work with Yosemite. What version do you have?

How to make attachments work in Guided procedures

Similar Messages

Maybe you are looking for