How to make Attribute Change run alignment & Hierarchy changes in Aggregat

Hello
I want to understand that How to make Attribute Change run alignment & Hierarchy changes in Aggregate?
I posted previously the same question but there were not good answers and i was not able to understand clearly .....
If there is Process chain XXY which makes Attribute change run for Master Data 0SPELLING ?
Now there is Aggregate TRT which includes :
0SPELLING , Fiscal Period , Purchase Product, Purchase Category ?
Now pls answer following question ?
1) Does the Process Chain XXY which makes only attribute change run alignment for 0SPELLING , Will this process chain automatically do the Change run alignment for 0SPELLING in Aggregate TRT ? YES or NO
2) If Yes, then we are just suppose to do Roll up for Aggregate TRT after Process chian XXY completes and finish job ?
3) If No, then what steps are suppose to be DONE so as to make sure that Aggregate TRT has new values and perfect values for 0SPELLING ?
Please answer and coorect if i have any wrong question....

for e.g.
u have 0spelling whicha has attributes x,y and z on day 1 with 10 records
so do ur aggregates on day1 with same values
now on day2 u had new values of attributes y,z,s,d and new hierarchies and so u add new records
with data load u will load the data with version M of modified and is not available for reporting
If u do attribute change run then this modified version is activated to A i.e. active version .
It will also do the change run alignment for Aggregate for new attribute values and new hierarchy values for aggregate.
now in order for this data to be available for reporting u will need to do the roll up of aggregate.....
if u roll up aggregate before attribute change run , new data is not avaialable for reporting
if u roll up aggregate after attribute change run, then data is available for reporting
if u dont roll up aggregate eventhough new data is in dataprovider, still new data will not be available for reporting.
this is how it works

Similar Messages

  • How to make Attribute Change run alignment & Hierarchy changes in Aggregate

    Hello
    I want to understand that How to make Attribute Change run alignment & Hierarchy changes in Aggregate?
    I posted previously the same question but there were not good answers and i was not able to understand clearly .....
    If there is Process chain XXY which makes Attribute change run for Master Data   0SPELLING ?
    Now there is Aggregate TRT which includes :
    0SPELLING , Fiscal Period , Purchase Product, Purchase Category ?
    Now pls answer following question ?
    1) Does the Process Chain XXY which makes only attribute change run alignment for 0SPELLING ,   Will this process chain automatically do the Change run alignment for 0SPELLING in Aggregate TRT ?         YES or NO
    2)  If Yes, then we are just suppose to do Roll up for Aggregate TRT after Process chian XXY  completes and finish job ?
    3) If No, then what steps are suppose to be DONE so as to make sure that  Aggregate TRT has new values and perfect values for  0SPELLING ?
    Please answer and coorect if i have any wrong question....

    for e.g.
    u have 0spelling whicha has attributes x,y and z on day 1 with 10 records
    so do ur aggregates on day1 with same values
    now on day2 u had new values of attributes y,z,s,d and new hierarchies and so u add new records
    with data load u will load the data with version M of modified and is not available for reporting
    If u do attribute change run then this modified version is activated to A i.e. active version .
    It will also do the change run alignment for Aggregate for new attribute values and new hierarchy values for aggregate.
    now in order for this data to be available for reporting u will need to do the roll up of aggregate.....
    if u roll up aggregate before attribute change run , new data is not avaialable for reporting
    if u roll up aggregate after attribute change run, then data is available for reporting
    if u dont roll up aggregate eventhough new data is in dataprovider, still new data will not be available for reporting.
    this is how it works

  • How to make a JApplet run in a Browser

    HI ALL:
    Can anyone tell me how to make a JApplet run in a IE.
    I am using JComponents and Visibroker for JAVA ORB for connecting to another ORB's which would in-turn connect to a C++ Server and finally to the SQL Server.
    I am getting a NoclassFoundException whenever I am running my JApplet.
    My code is >>
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    <html>
    <head>
    <meta http-equiv="Content-type" Content="text/html;charset=iso-8859-1">
    <title>
    ORB ISSUE TRACKING SYSTEM
    </title>
    </head>
    <body>
    <Applet
         CODE="file://D:/IssueTrackingSystem/IssueTrackingSystem.class"
         Width=700
         Height=700
         Align=middle
    >
    <param name="CABBASE" value="IssueTest.cab">
    </Applet>
    </Body>
    </Html>
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    The Cabase file is a winzip file having all the ORB's compliant classes and my source classes to interact with the ORB Server.
    Help is urgent.
    Regards
    Ritesh

    I have been having exactly the same problems but I was using JDK 1.2.
    I discovred the problem could be resolved by using the Plug-in on navigaor or IE and bingo it was perfect.
    I also discovered that using the AppletViwer would allow me to see the applet. Then I upgraded to JDK1.3 or 2 or whatever it is and nothing.
    I recompiled the classes using the !.3 still nothing. The applet vewer don't work and the plug in don't work.
    I tried to recompile using the oldjavac ( I assume 1.2) and nothing I do will make this JApplet run. Ordinary a�pplets are OK. Applications with swing are OK, but JAPPLets are dead
    I have come to the conclusion SUN has screwed up big time and are frantically scrabbling about looking for a fix. I have reveert to javascript/DHTML as this is both consistent and stable and for considerably less effort and aggravation you can get 90% of the functioonality.

  • How to make a job run on a appointed node

    I have a problem. The database is Oracle 10g, RAC, two nodes
    There are some job which run on everyday night. Now, something happened, the job run on Node A can't work as normal, but if run on node B, It will work well.
    so I just want to submit the jobs on Node B, I submited the jobs on Node B, but the jobs always run on Node A.
    I want to know how to make a job run on a appointed node.

    the Job just transfer some procedure to add partitions for some table, to merge the records from some tables to one table and so on.
    the problem is when the job run on Node A, it is very very slow, the procedure would run hours and not success end, but if on Node B it will successfully end in seconds.
    restart the Node A would be a way for the problem, but may it will leave a hidden trouble. I want save the scene to find out the problem
    so can you help me

  • How to make a loop run for specific period of time ?

    hello !
    i'm new to labview and could'nt found how to make a loop run for 2 sec for example, and then to exit.
    Solved!
    Go to Solution.

    Hi Hookso,
    You can do it using the different loops like While loop and For Loop. Roderic has already stated how to do it using a for loop. I have illustrated in the attached vi how to do it using a while loop and Elapsed Time function. Take a look.
    Regards,
    Nitzz
    (Give kudos to good Answers and Mark it as a Solution if your problem is Solved) 
    Attachments:
    Untitled 2.vi ‏36 KB

  • How to make tomcat still running after reboot

    hi all,
    i want ask about how to make tomcat still running after our computer reboot.
    so our server still can serve the the request without we start manualy the tomcat.
    please replies
    thank's before

    *nix or win32 or other?                                                                                                                                                                                                                                           

  • How to make keynote presentation run automatically

    how to make keynote presentation run automatically

    Keynote can enter play mode when the file is opened:
    Inspector > Document > Automatically play on opening

  • How to make mac desktop run faster . It is starting to freeze up in Safari sometimes.

    How to make IMAC desktop run faster.

    Mavericks is the Operating System, while you could call it a program it's the OS. We need to know:
    what year iMac you have including the amount of RAM installed, the capacity of the internal HD and how much is stored on it and under what conditions the computer runs slowly. Please CAREFULLY read Help us to help you on these forums

  • Do I need to run "Change run" if I have no aggregates in the cubes

    Hello
    Do I need to run "Change run" if I have no aggregates in the cubes?
    If yes, why?
    thanks

    Hi there,
    As said the change run will activate the modified records from a master data of a characteristic.
    If this characteristic is used in any aggregate then the change run will also rearrange the aggregates.
    Diogo.

  • Attribute Change Run for Hierarchy

    Dear experts:
    we are trying to create a process chain for a hierarchy. When we included "Execute InfoPackage" into process chain, it automatically dragged other 2 steps into process chain as well, which are "Save Hierarchy" and "Attribute Change Run".
    My Question is when we looked into "Attribute Change Run", the obj type is "Execute InfoPackage" instead of "Hierarchy". Shouldn't we choose hierarchy as object type when operating Attr change run??
    Besides, I checked SAP document. It is said the "Attr Change Run" is only necessary when the hierarchy occurs in aggregates. Can anyone please explain to me what that means.
    Thank you very much
    Regards
    SzuFen

    Haven't really looked at the object types in the process chain (we're still using event chains here for the most part), but I would be inclined to leave it as, and only change it if you have a problem.
    The process chain tool drags steps into the chain by default, e.g drop and build index, attr change run.  That doesn't mean you have to keep them in the chain.  If you do not have hierarchies in your aggregates, you could remove the step.  Now of course, the burden falls on you to remember to add it if you ever create an aggregate with a hierarchy in it.
    Of course the next would be, if most of your queries use a hierarchy, you would probably want the hierarchy in the aggregate, otherwise the aggregate isn't going to be used.

  • How to make a Java application that will change the client box's IP address

    HI how to make a Java application( that application would be run on the client ) that will change the client box's IP address ( IP address of itself )

    If you can do that through the command line, then use Runtime.getRuntime().exec(...) to execute your command.

  • How to make this example run on IE ?

    for example below :
    * LunarPhasesRB.java requires the following files:
    *    images/image0.jpg
    *    images/image1.jpg
    *    images/image2.jpg
    *    images/image3.jpg
    *    images/image4.jpg
    *    images/image5.jpg
    *    images/image6.jpg
    *    images/image7.jpg
    * It is a modified version of LunarPhases.java that
    * uses radio buttons instead of a combo box.
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    import java.net.URL;
    public class LunarPhasesRB implements ActionListener {
        final static int NUM_IMAGES = 8;
        final static int START_INDEX = 3;
        ImageIcon[] images = new ImageIcon[NUM_IMAGES];
        JPanel mainPanel, selectPanel, displayPanel;
        JLabel phaseIconLabel = null;
        public LunarPhasesRB() {
            //Create the phase selection and display panels.
            selectPanel = new JPanel();
            displayPanel = new JPanel();
            //Add various widgets to the sub panels.
            addWidgets();
            //Create the main panel to contain the two sub panels.
            mainPanel = new JPanel();
            mainPanel.setLayout(new BoxLayout(mainPanel, BoxLayout.PAGE_AXIS));
            mainPanel.setBorder(BorderFactory.createEmptyBorder(5,5,5,5));
            //Add the select and display panels to the main panel.
            mainPanel.add(selectPanel);
            mainPanel.add(displayPanel);
         * Get the images and set up the widgets.
        private void addWidgets() {
             * Create a label for displaying the moon phase images and
             * put a border around it.
            phaseIconLabel = new JLabel();
            phaseIconLabel.setHorizontalAlignment(JLabel.CENTER);
            phaseIconLabel.setVerticalAlignment(JLabel.CENTER);
            phaseIconLabel.setVerticalTextPosition(JLabel.CENTER);
            phaseIconLabel.setHorizontalTextPosition(JLabel.CENTER);
            phaseIconLabel.setBorder(BorderFactory.createCompoundBorder(
                BorderFactory.createLoweredBevelBorder(),
                BorderFactory.createEmptyBorder(5,5,5,5)));
            phaseIconLabel.setBorder(BorderFactory.createCompoundBorder(
                BorderFactory.createEmptyBorder(0,0,10,0),
                phaseIconLabel.getBorder()));
         //Create radio buttons with lunar phase choices.
         JRadioButton newButton = new JRadioButton("New");
         newButton.setActionCommand("0");
         newButton.setSelected(true);
         JRadioButton waxingCrescentButton =  new JRadioButton("Waxing Crescent");
         waxingCrescentButton.setActionCommand("1");
         JRadioButton firstQuarterButton = new JRadioButton("First Quarter");
         firstQuarterButton.setActionCommand("2");
         JRadioButton waxingGibbousButton = new JRadioButton("Waxing Gibbous");
         waxingGibbousButton.setActionCommand("3");
         JRadioButton fullButton = new JRadioButton("Full");
         fullButton.setActionCommand("4");
         JRadioButton waningGibbousButton = new JRadioButton("Waning Gibbous");
         waningGibbousButton.setActionCommand("5");
         JRadioButton thirdQuarterButton = new JRadioButton("Third Quarter");
         thirdQuarterButton.setActionCommand("6");
         JRadioButton waningCrescentButton = new JRadioButton("Waning Crescent");
         waningCrescentButton.setActionCommand("7");
         // Create a button group and add the radio buttons.
         ButtonGroup group = new ButtonGroup();
         group.add(newButton);
         group.add(waxingCrescentButton);
         group.add(firstQuarterButton);
         group.add(waxingGibbousButton);
         group.add(fullButton);
         group.add(waningGibbousButton);
         group.add(thirdQuarterButton);
         group.add(waningCrescentButton);
            // Display the first image.
            phaseIconLabel.setIcon(new ImageIcon("images/image0.jpg"));
            phaseIconLabel.setText("");
           //Make the radio buttons appear in a center-aligned column.
            selectPanel.setLayout(new BoxLayout(selectPanel, BoxLayout.PAGE_AXIS));
           selectPanel.setAlignmentX(Component.CENTER_ALIGNMENT);
            //Add a border around the select panel.
            selectPanel.setBorder(BorderFactory.createCompoundBorder(
                BorderFactory.createTitledBorder("Select Phase"),
                BorderFactory.createEmptyBorder(5,5,5,5)));
            //Add a border around the display panel.
            displayPanel.setBorder(BorderFactory.createCompoundBorder(
                BorderFactory.createTitledBorder("Display Phase"),
                BorderFactory.createEmptyBorder(5,5,5,5)));
            //Add image and moon phases radio buttons to select panel.
            displayPanel.add(phaseIconLabel);
           selectPanel.add(newButton);
           selectPanel.add(waxingCrescentButton);
           selectPanel.add(firstQuarterButton);
           selectPanel.add(waxingGibbousButton);
           selectPanel.add(fullButton);
           selectPanel.add(waningGibbousButton);
           selectPanel.add(thirdQuarterButton);
           selectPanel.add(waningCrescentButton);
            //Listen to events from the radio buttons.
           newButton.addActionListener(this);
           waxingCrescentButton.addActionListener(this);
           firstQuarterButton.addActionListener(this);
           waxingGibbousButton.addActionListener(this);
           fullButton.addActionListener(this);
           waningGibbousButton.addActionListener(this);
           thirdQuarterButton.addActionListener(this);
           waningCrescentButton.addActionListener(this);
        // Load the selected image (lazy image loading).
        public void actionPerformed(ActionEvent event) {
           phaseIconLabel.setIcon(new ImageIcon("images/image"
                                  + event.getActionCommand()
                                  + ".jpg"));
         * Create the GUI and show it.  For thread safety,
         * this method should be invoked from the
         * event-dispatching thread.
        private static void createAndShowGUI() {
            //Create a new instance of LunarPhasesRB.
            LunarPhasesRB phases = new LunarPhasesRB();
            //Create and set up the window.
            JFrame lunarPhasesFrame = new JFrame("Lunar Phases");
            lunarPhasesFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            lunarPhasesFrame.setContentPane(phases.mainPanel);
            //Display the window.
            lunarPhasesFrame.pack();
            lunarPhasesFrame.setVisible(true);
        public static void main(String[] args) {
            //Schedule a job for the event-dispatching thread:
            //creating and showing this application's GUI.
            javax.swing.SwingUtilities.invokeLater(new Runnable() {
                public void run() {
                    createAndShowGUI();
    }i know run above example on command line while i don't how to make run on IE ?
    because mostly people are used to look at sth on IE ?
    so i think it's important to runs javacode on IE .
    who can help me ?
    thanks!

    If you want it to execute inside a web browser then you need to convert it to an applet. Alternatively you can investigate Java Web Start.

  • How to Make the fields Delta enabled or Change pointer enabled in R/3

    Hi ,
    I have a scenario, in which we are using the DS 0CUSTOMER_ATTR to load the master data.There are some fields added to this data source but this fields are not delta enabled i.e. when these fields change in R3 it does not write to Change Pointers ( and hence no delta ). For this reason every week we have to do a full load which takes very long.
    Can any one suggest how to make this fileds delta enabled or how to know weather these fields are writing the Change pointers or not in R/3 when they change?
    Regards,
    Vishnu

    Hi Vishnu,
    In your case you need to build the logic for your custom fields as you have enhanced the Business Content DS..
    The way you can build the logic would be using the CDHDR and CDPOS tables if the changes are recorded in those tables.
    The above tables contain any changes done to any documents..
    Let me know if it helps..
    Best Regards
    Avinash

  • Launchd: how to make a script run every weekday?

    I'm trying to make a script run every weekday as a LaunchAgent. Is there a way to do this like you could in cron?
    Here is the relevant portion of my LaunchAgent plist:
    <key>StartCalendarInterval</key>
    <dict>
    <key>Hour</key>
    <integer>9</integer>
    <key>Minute</key>
    <integer>0</integer>
    <key>Weekday</key>
    <integer>3</integer>
    </dict>
    I have tried changing the Weekday integer to 1-5 or 1,2,3,4,5 but neither worked. It only works with a single integer. Do I have to create 5 separate plists for each weekday?
    Any ideas?

    Thanks VK, for others who are looking to do something similar, here is the relevant part of the code to make the command run every day (since that field is missing) at 7:00pm and 7:01pm:
    <key>StartCalendarInterval</key>
    <array>
    <dict>
    <key>Hour</key>
    <integer>19</integer>
    <key>Minute</key>
    <integer>00</integer>
    </dict>
    <dict>
    <key>Hour</key>
    <integer>19</integer>
    <key>Minute</key>
    <integer>01</integer>
    </dict>
    </array>

  • How to make my iMac run faster

    Hi there,
    I have a 2011 iMac which is hardly used.  I have upgraded the ram to 12 GB when I purchased it.  However, it takes ages for the computer to run, especially during start-up.
    Any thoughts on how to make it run faster?
    Cheers,
    Gary

    Make sure you installed the correct RAM. Installing the wrong type will cause the system to become unstable and slow.

Maybe you are looking for