How To make/configure  Broadband connection in Sun java desktop system

Hi all,
I am using sun java desktop system Release 3 solaris 10 version in my sun ultra workstation. I have a problem with it. I can not make broadband connection , in it. so pls let me know how can i make broadband connection with my ADSL modem ?
Thanks
Partha

Try this:
Log into a termina as rootl. (Select failsafe terminal or command login)
To get the name of your network interface driver, type:
/usr/sbin/ifconfig -a You'll see something like this:
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
hme0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 129.156.226.245 netmask ffffff00 broadcast 129.156.226.255
In my case it is hme0 so I create a file called /etc/dhcp.hme0:
touch /etc/dhcp.hme0If you want to set a hostname, put it in a file called /etc/hostname.hme0 for example:
rm /etc/hostname.hme0
echo myhostname > /etc/hostname.hme0Most broadband providers preconfigure ADSL modems to default to DHCP so if you do this, connect the ultra 10 to the broadband modem and reboot, the ultra 10 should pick up an IP address and be connected to the internet.

Similar Messages

  • Problem Connecting to Sun Java(tm) System Messaging Server 6.2-3.05

    Hi All,
    I am trying to connect to Sun Messaging Server from my program. Till now I tested the program against all other popular IMAP servers with out any problem. I have set the debug to true. I am not able to figure why the connection is getting reset. Any help would be greatly appreciated
    Thanks in Advance
    Srinivas
    DEBUG: setDebug: JavaMail version 1.4.1ea-SNAPSHOT
    * OK [CAPABILITY IMAP4 IMAP4rev1 ACL QUOTA LITERAL+ NAMESPACE UIDPLUS CHILDREN BINARY LANGUAGE XSENDER X-NETSCAPE XSERVERINFO AUTH=PLAIN] Messaging Multiplexor (Sun Java(tm) System Messaging Server 6.2-3.05 (built Nov 23 2005))
    IMAP DEBUG: AUTH: PLAIN
    A0 CAPABILITY
    * CAPABILITY IMAP4 IMAP4rev1 ACL QUOTA LITERAL+ NAMESPACE UIDPLUS CHILDREN BINARY LANGUAGE XSENDER X-NETSCAPE XSERVERINFO AUTH=PLAIN
    A0 OK CAPABILITY completed
    IMAP DEBUG: AUTH: PLAIN
    A1 LOGIN KBahadur mypassword
    javax.mail.MessagingException: * BYE JavaMail Exception: java.net.SocketException: Connection reset;
    nested exception is:
         com.sun.mail.iap.ConnectionException: * BYE JavaMail Exception: java.net.SocketException: Connection reset
         at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:476)
         at javax.mail.Service.connect(Service.java:275)
         at javax.mail.Service.connect(Service.java:156)
         at com.gavs.mail.receiver.MailReceiver.receive(MailReceiver.java:74)
         at com.gavs.mail.receiver.MailReceiver.poll(MailReceiver.java:39)
         at com.gavs.calendar.server.HTTPPushServer$4.run(HTTPPushServer.java:72)
    Caused by: com.sun.mail.iap.ConnectionException: * BYE JavaMail Exception: java.net.SocketException: Connection reset
         at com.sun.mail.iap.Protocol.handleResult(Protocol.java:315)
         at com.sun.mail.imap.protocol.IMAPProtocol.login(IMAPProtocol.java:307)
         at com.sun.mail.imap.IMAPStore.login(IMAPStore.java:521)
         at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:456)
         ... 5 more

    I vaguely remember that there was a Messaging Server bug that
    caused it to fail because JavaMail was sending it two packets
    containing the data but it was expecting all the data to be in one
    packet. I thought JavaMail was fixed to send it one packet, to
    avoid the bug, and I thought the server was fixed as well so be
    sure to check for relevant patches. And be sure you're using the
    latest version of JavaMail.
    If I remember correctly, telnet was batching the data for the entire
    line and sending it in a single packet, which is why it worked when
    using telnet.
    You might try a network protocol analyzer (sniffer) like snoop on
    Solaris or tcpdump on Linux to see exactly what packets are being
    sent.

  • Sun Java Desktop System [ SSH hanging]

    Hello,
    I am running latest solaris 10 release (10/09 Generic_141445-09 ) using gnome-terminal GNOME Terminal 2.6.1 (supplied with solaris)
    from within gnome terminal, as root, I can start interactive ssh session from this box to anywhere fine.
    BUT
    from within gnome terminal, as ANY OTHER user, the INTERACTIVE ssh connection from this box to any server HANGS (remote commands run fine)
    This issue does not happen from within XTERM window:
    from within XTERM terminal window, I can successfully start an interactive ssh session to anywhere (as any user).
    so that means problem is either with some environment variable(since it works for root from gnome-terminal) OR with the GNOME terminal app (but it is working for root???)
    root user is using /sbin/sh shell. other users use /usr/bin/bash. there is no .bashrc file at the moment,
    can anyone help? do i need a patch? or reset some variable?
    thx.
    -BG
    Edited by: badeguruji on Dec 29, 2009 9:57 AM
    Edited by: badeguruji on Dec 30, 2009 7:42 AM

    hi,
    The session that hangs does it establish a connection first? Does it prompt for a password etc? If you could tell me the results of the below commands:
    As root
    ssh server
    ssh user@server
    As a user
    ssh server
    ssh root@server
    If the first two tests pass and the second two fail then could you please send the following output:
    As root
    ssh -v server (just login with a password then kill the connection)
    As a user
    ssh -v server (again run either until it hangs or login if you can and then kill the connection)

  • Sun Java Desktop System

    Please what is this all about? Where can one get to read well about this..is it free to get?

    But is there any Linux Distibution in which Java and its GUI application just compiles "natively" such that all swing APIs and all avaliable GUI platforms, all available look and feels and the Huge Java API are sort of pre-bundled in it.
    I think this can sort of accelerate Java based application development. Of course i know its possible to put all this together by oneself by using any specie of Linux but i believe that an all-in-one distribution can still inspire java development on linux platform....well pardon my ignorance if there is any.

  • Is it possible to make a broadband connection in iOS for ipad?

    Hi, is it possible to make a broadband connection on iPad using iOS 6.1.3 ?
    As I had this problem in my apple devices, I searched a lot and finally I found out how to make a broadband connection like what what we do on widows 7 or windows 8 on Mac OS X mountain Lion, but I still can't make it on iPad, I just want to know if it's possible.
    Thanks.

    For example, in the university where I study in order to use wi-Fi you are given a user name and a pass word first you connect to the Wi-Fi but you won't have access to the Internet if you just try to connect to the Wi-Fi after that you have to connect to the broadband you've made in your PC with that username and password, this is what I mean. Of course I have used Wi-Fi this way on windows and Mac but not in iOS.

  • Java Desktop System, Release 2 - Error activating XKB configuration

    Hi,
    There is know problem with Java Desktop System, Release 2:
    If you log in using accessibility features on the Java
    Desktop System for the Solaris platform, the following
    error dialog might appear: Error activating XKB configuration.
    How can I solve this problem? Can I disable accessibility features (especially when I log in using NoMachine NX Client)?
    Thanks,
    Rafal

    I have been trying to install Oracle version 10g on Sun Java Desktop System Release 2 (Linux) but unable to do so.Some error message?
    Can I install Oracle on Sun Java Desktop System Release 2 (Linux)? How to do that?As far I know Sun JDS release 2 is based on SuSE so check Suse related installation papers.
    You can find them on http://www.oracle.com/technology/tech/linux/install/index.html
    What version of Oracle ver 10g Release 1 should I download?Depends on architecture (CPU) and installed OS version (32bit, 64bit).

  • How to make SAP B1 connection with Windows Sharepoint Service 3.0

    how to make SAP B1 connection with Windows Sharepoint Service 3.0 through asp.net web part code.. I get the security error when i run that web part......
    public bool ConnectToCompany()
                oCompany = new SAPbobsCOM.Company();
                oCompany.Server = "192.168.1.58";
                oCompany.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005;
                oCompany.CompanyDB = "SBODemoUS";
                oCompany.DbUserName = "sa";
                oCompany.DbPassword = "abc";
                //oCompany.UseTrusted = true;
                oCompany.UserName = "manager";
                oCompany.Password = "manager";
                oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English;
                oCompany.LicenseServer = "192.168.1.58:30000";
                int i = oCompany.Connect();
                if (i != 0)
                    return false;
                return true;
    protected override void RenderContents(HtmlTextWriter writer)
                if (conn.ConnectToCompany() == true)
                    writer.Write("Hello" + this.Context.User.Identity.Name);
    Edited by: bikalg on Nov 28, 2010 9:43 AM

    Hi.......
    Welcome to SAP Business One Forum.....
    Unfortunately this is the wrong forum you posted here.
    I would suggest you post it in SDK or System Administration Forum and definitely you get the solution and close this thread from here......
    Regards,
    Rahul

  • How to make the wifi connection with Ipad in china since it requires user's name and password.

    How to make the wifi connection with Ipad in china since it requires user's name and password just like the dialed-up?

    The same way you would connect to a secure wifi network in any other country. Supply the username and password when prompted.

  • How do i configure DSN connection to database Programmatically

    Hi to all,
    Can anybody assist me as how could i configure DSN connection to database Programmatically.
    Thanks in advance.
    Regards
    khiz_eng

    Hi DrClap,
    Many thanx for your advise, i have also done with MS-Access but now i wnated to have with .csv value, how i am going to have this .I have searched the whole JDBC forum already unable to find for .csv
    Please provide me and solve my problem
    Thanks in advance.
    khiz_eng

  • How to make a jar file from a java file?

    how to make a jar file from a java file, is there any one tht can help me thank you;

    You can study this.
    http://java.sun.com/docs/books/tutorial/jar/basics/index.html

  • How to make a data base connexion in java?

    I have an oracle 7 data base that i want to connect how to make a data base connexion in java?

    J
    D
    B
    C
    Search these forums or follow the JDBC tutorial

  • How can I deploy JBI Application in Sun Java System Application Server 9?

    I developed a demo "Loan Processing Composite Application " in Netbeans.org(http://www.netbeans.org/kb/55/loanprocessing.html).
    The guide only show the deployment using Netbeans6.Now I want to deploy it directly using Server9 , how can I do?
    How to deploy a soa application in Sun Java System Application Server 9? Is there any doc?
    Please~~I'm puzzled.

    To deploy a JBI application to Sun's App Server, you will need a JBI compliant ESB installed. OpenESB would be my first choice here. Then as far as installing your components without Netbeans, there are two choices. 1) Copy your SA's to the JBI/ESB autodeploy directory and you binding components and service engines to the JBI/ESB autoinstall directory. 2) Use the ant tasks that the JBI specification (http://jcp.org/en/jsr/detail?id=208) requires for all JBI implementations. OpenESB's JBI tasks are detailed here: http://wiki.open-esb.java.net/Wiki.jsp?page=JBIAntTaskReference. These ant tasks can be wrapped with maven goals if needed.
    Jeff

  • How to see console output in Sun Java(TM) System Web Server 6.1 SP7?

    Dear All,
    I am having Sun Java(TM) System Web Server 6.1 SP7 installed on Windows 2000 Prof.
    I have deployed few applications and they were running successfully.
    From debugging point of view, i like to see the output from System.out.println .
    Prior to SP7 there is a console which shows this output. But now the batch files only starts and stops the admin and site server services. Where to see for console output?
    Is there command like tail.exe of Weblogic awailable for Sun Java System Web Server or any setting to be done in Admin?
    Please revert.
    -Sameer

    Response headers can be found in srvhdrs pblock.
    Those can be manipulated by using set-variable
    http://docs.sun.com/app/docs/doc/820-1638/6nda01tea?l=en&a=view#abuis
    You can read more about these in
    Sun Java System Web Server 6.1 SP8 Administrator's Configuration File Reference
    http://docs.sun.com/app/docs/doc/820-1638?l=en
    and
    Sun Java System Web Server 6.1 SP8 NSAPI Programmer's Guide
    http://docs.sun.com/app/docs/doc/820-1643?l=en

  • Is there any way to make a socket connection to a java file on the net?

    Is their anyway to make a socket connection to a java applet that I place on a webhost? I want to connect to a javaapplet from my vb.net program and send commands to it. Like http://www.geocities.com/Sylonious/javafile.jpx:7070
    ?

    Is their anyway to make a socket connection to a java
    applet that I place on a webhost? I want to connect to
    a javaapplet from my vb.net program and send commands
    to it. Like
    http://www.geocities.com/Sylonious/javafile.jpx:7070
    ?You wouldn't have a port in the url, you would need to have the socket open in the applet code. The vb.net program would also need to be on the same server as the applet or you'll have security issues and I doubt that's possible with geocities. I don't know what you would need to communicate with a vb.net if anything, but I'm sure it's possible.

  • Sun Java(tm) System Messaging Server 6.3-0.15 outgoing mail issue

    Hi,
    We are running Sun Java(tm) System Messaging Server 6.3-0.15 (built Feb  9 2007).
    with this java code if i change  email.setFrom(SenderEmial);   to any other email address than the mail server will send email form that email instead of authenticated which is a problem for us so that any one can misuse it. i need help regarding this issue.I think its due to lack of SSL security so i want to know that how i can enable SSL.
      Email email = new SimpleEmail();
        email.setSmtpPort(25);
        email.setAuthenticator(new DefaultAuthenticator("[email protected]","myPass"));
        email.setDebug(false);
        email.setHostName("mail.sunjavamail.com");
        email.setFrom(SenderEmial);  //By changing this my mail server is sending emails from any email address.
        email.setSubject("Hi");
        email.setMsg("Test Mail");
        email.addTo("[email protected]");
          // email.setTLS(true);
       // email.setSSL(true);
        email.send();
        System.out.println("Done");
    Thanks..

    Hi,
    I do not think this is unusual.  Out of the box there are no restrictions on From: addresses, they're not required to match the domain of the sender or match up with DNS results.  You can configure various restrictions or even modify the from address based on the users authenticated credentials, but not by default. 
    See the following documentation for details on restricting From: addresses:
    https://wikis.oracle.com/display/CommSuite/Mail+Filtering+and+Access+Control#MailFilteringandAccessControl-FROMACCESSDescription
    https://wikis.oracle.com/display/CommSuite/Handling+Forged+Email+by+Using+the+Sender+Policy+Framework

Maybe you are looking for

  • After downloading itunes it changes all my icons to the itunes icon and the only software that opens is itunes? to

    Why does itune change all the icons on my desktop to the itune icon after downloading?  Then resulting in the only software that will open is itunes?

  • How to find the structure in this user exit

    My requirement is add new field to Delivery due list ALV report(VL10G).For enhance this report i will append one field(LIKP-SDABW) in this structure SHP_VL10_ITEM.This structure is not showing in the include LV50R_VIEWG05 USEREXIT_PREPARE_LAYOUT_FILL

  • Itunes wont even come up!!!!

    i just downloaded the new itunes 7 but i wont work every time i click on it it says, 'Quicktime Version 7.0d0 is installed, Itunes requires Quicktime version 7.1.3 or later plaease reinstall intunes' but i already did several times and i restarted my

  • Mapping default values

    I've following requirement 1) output XML consist a section of address data which are mandatory (mandatory data are pointed below with * *);           *<ShipToParty>*                *<Party>*                     <Identification>                       

  • Incorrect photos in iPhoto trash

    Don't know if this is the correct forum. I can't find a specific forum for iPhoto 5. iPhoto 5 is being used for a particular library for compatibility with another user who is limited to this version of iPhoto (PPC, G5, OS 10.5). The problem is that