How to make ECC as central alert server, and XI as child alert server?

Hi All
I have a requirement where, i need to raise alerts in XI message processing, and also during message processing in application system (ECC system).
Now, how can i make ECC as central alert serer & XI as child alert server?
We are not using CCMS.
Thanks
Chandra

u can use the alert abap function module to raise an alert which occurs in ECC system.
but i m not sure how u will catch the errro and pass the error message to the alert FM for raising an alert.
We have done some validation in Function module based on inputs and triggered an alert using the function module.
just look at the link for the same.
Triggering by Calling a Function Module Directly.
Triggering XI Alerts from a User Defined Function
chirag

Similar Messages

  • How to make a communication of two VIs from difference computers throught VI server?

    how to make a communication of two VIs from difference computers throught VI server?
    I have built the program which is attached at below. But it doesn't work. Can any one help me?
    Attachments:
    panel5.vi ‏82 KB

    Hi Barry,
    What do you mean "it doesn't work"? What kind of errors are you seeing? Also, you only specified the file name (data.vi) when opening a VI reference. Try specifying the whole path to the VI. Also, you might want to make sure you are able to ping your other computer from the start (to see if this is a LabVIEW issue or a network issue).
    Hope this helps,
    Travis H.
    LabVIEW R&D
    National Instruments

  • How to make a commentary track in iDVD and iMovie 6

    Could someone please explain how to make a commentary track using iMovie6 and iDVD? I think I will be able to import the commentary track onto the second sound track in iMovie 6 with no problem. I just can't figure out how to make it an optional track in the final DVD.

    Yes, you can put the commentary track on the second sound track in 06. You can also attach a mic and make the commentary as a recording. I will caution that you will need to depress any original sounds associated with the film so that it does not sound like a garbled mess with both tracks competing. I imagine you know how to grab the volume level line in the audio track and nudge it lower or higher?
    I also don't see any other option than including two versions of the film on the DVD. Pretty simple fix if it will fit... I would export the plain film first before adding the other audio (or you can simply uncheck one of the audio tracks while exporting to mute it).
    Terri

  • How do we link the central organizational unit and purchase organization i

    hi friends
    How do we link the central organizational unit and purchase organization in SUS configuration? 
    regards
    vinaykrishna

    The workflow process is associated to the transaction you select by parameters in the function call.
    The Responsibility 9e.g. employee self service) is linked to a menu. The menu contains (amongst other things) functions. If the function is associated to a menu prompt, then when the user clicks on the prompt (e.g. Change Job) the function is invoked. When the function is invoked, it calls the workflow described in the function call.
    The function will already (out of the box) point to a workflow process. If you have customised your own process, you will need to amend the function call to call your workflow name.
    Look at the function in question and you will see what I mean.
    Hope that helps explain it!
    Regards
    Tim

  • Flash cs3: how to make moving/scrolling photo menu left and right?

    http://media.moma.org/subsites/2008/miro/flashsite/index.html
    - click continue, then relative size link
    How can I do this with lash cs3: how to make moving/scrolling
    photo menu left and right?
    When you move left and right and paintings move. and when you
    click on a painting, you see the the title and it links to another
    page on the site.

    scene_mc start at x = -550... x wide is 2164 px
    now I have this and its working...
    navL_mc.addEventListener(MouseEvent.MOUSE_OVER, navL_Over);
    navL_mc.addEventListener(MouseEvent.MOUSE_OUT, navL_Out);
    function navL_Over(e:MouseEvent){
              if(scena_mc.x == 0){
                                  scena_mc.x == 0;
              else if(scena_mc.x <= -10){
                                  scena_mc.x += 10;
                                  navL_mc.addEventListener(Event.ENTER_FRAME, runL);
    function runL(e:Event):void{
              if(scena_mc.x == 0){
                                  scena_mc.x == 0;
              else if(scena_mc.x <= -10){
                                  scena_mc.x += 10;
    function navL_Out(e:MouseEvent){
              navL_mc.removeEventListener(Event.ENTER_FRAME, runL);
    navR_mc.addEventListener(MouseEvent.MOUSE_OVER, navR_Over);
    navR_mc.addEventListener(MouseEvent.MOUSE_OUT, navR_Out);
    function navR_Over(e:MouseEvent){
              if(scena_mc.x == -1164){
                                  scena_mc.x == -1164;
              else if(scena_mc.x >= -1154){
                                  scena_mc.x -= 10;
                                  navR_mc.addEventListener(Event.ENTER_FRAME, runR);
    function runR(e:Event):void{
              if(scena_mc.x == -1164){
                                  scena_mc.x == -1164;
              else if(scena_mc.x >= -1154){
                                  scena_mc.x -= 10;
    function navR_Out(e:MouseEvent){
              navR_mc.removeEventListener(Event.ENTER_FRAME, runR);

  • How to make comnapy code defalut got 100 and 1001 in the PNP screen

    Hi Expart ,
    can u tell me my que how to make comnapy code defalut got 100 and 1001 in the PNP screen in HR reporting?
    Regards
    Razz

    Use the below code in the   INITIALIZATION   
                     INITIALIZATION                                      *
    initialization .
    " Make Default values for Company Code 2100 & 2200
      PNPBUKRS-LOW  = '2100'.
      PNPBUKRS-HIGH = '2200'.
      append PNPBUKRS.
    regards
    .....lakhan

  • How to make Nokia Suite remember the position and ...

    how to make Nokia Suite remember the position and the size i set it?
    because everytime i start it, it defaults in the middle of the screen and in the smallest possible size.
    Nokia Suite 3.3.86
    Windows Vista
    Greece Nokia X6 RM-559 v40.0.002

    Again, are you talking about genuine Nokia firmware, not any of some 3rd-party customised versions?
    For officially released firmware, you may force Nokia Suite to reinstall even if your firmware is already up to date. This feature might be missed in its GUI as its link is "hidden" in the prompt message, not on a button or highlighted with underscore. Try Nokia Suite, once the phone is connected, click the icon of Software Update on the top, then click the word "reinstall" in the prompted message.
    bbao
    * If this post helped you, please click the white Kudo star.
    * If this post has solved your issue, please click Accept as Solution.

  • What is the difference between Outlook features using exchage server and using 3rd party mail server ?

    Hi~ I'd like to know what the difference is between Outlook features using exchage server and using 3rd party mail server.
    If I use 3rd party mail server with Outlook, Outlook features are the same as Exchange Server ?
    I want to use all Outlook features..

    The basic features (and many advanced features) are identical in all accounts. With pop3, your mail, calendar, contacts, tasks, notes are stored in a pst and are only on the computer. IMAP accounts only sync email back to the server, not calendar,
    contacts, and tasks. Outlook.com EAS accounts (aka Hotmail) syncs calendar and contacts back to the server. Exchange mailboxes stores everything on the server - mail, calendar, contacts, custom views, rules - and if you open the mailbox in outlook on
    any other computer, the mailbox is identical. Because everything is on the server, you'll have much better syncing with smartphones and tablets with Exchange mailboxes.
    Calendar sharing, open other users folder, and retention policies are Exchange-only. Mail Tips and apps (linked under the reading pane header in Outlook 2013) are Exchange-only.
    Diane Poremsky [MVP - Outlook]
    Outlook & Exchange Solutions Center
    Outlook Tips
    Subscribe to Exchange Messaging Outlook weekly newsletter

  • How to make HTTP connection between a midlet and a php server?

    As the title above, can anyone share how to make a HTTP connection between those 2? J2ME and PHP. Thanks a lot!

    Can you be a little more specific on what you really want.
    When i started doing j2me application, i was required to be able to comunicate to a oracle client database, and my first though was using PHP based pages to comunicate and do the query. Later they would just generate the answer and get it on the cellphone. You can communicate with a PHP server via either GET or POST. I'd choose POST as is more secure IMO.
    Here are quite a good ammount of examples of how you can do it
    http://www.java2s.com/Code/Java/J2ME/Networks.htm
    They aren't PHP based examples, but you have can an idea of how it can be done

  • How to start 1 JCO-unicode-Server and 1 JCO-none-unicode-Server

    It is possible to start one JCo-Server that is unicode-able and another one JCo-Server that is not unicode-able in one program?
    I want to share one service that my Java-Program is providing for 2 SAP-Systems. But one SAP-System is a Unicode-System and the other a None-unicode-System.
    I've implemented the tip of the following site for my Unicode-System, but anyhow it does not function:
    http://help.sap.com/saphelp_nw04/helpdata/de/87/b55a4201301453e10000000a155106/content.htm
    If I start the JCo-Server for my Unicode-System first, then the communication for this system will work, but for the other, none-unicode system not.
    If I start the JCo-Server for my None-unicode-System first, then only the communication for the none-unicode system will work.
    Any Ideas??
    Or another question: How can I make the Unicode-System communicate-able with a none-unicode JCo-Server?
    Thanks for reply.

    Hi,
    i've solved my problem: I changed all my JCo-Objects in my program from from version 2.1.8 to 3.0.2.
    After that I don't needed to input information wether it's a unicode-connection or not.

  • How do I get Mail to download mail and delete it from the server?

    I don't think Mail is downloading my E-mail from my server to my computer.
    My main e-mail account is set up as a POP mail account and I have it set to: "remove a copy from server after receiving message: right away"
    I have a couple of years of e-mail on my computer and it was getting slower and slower to access many of e-mails. I checked the e-mail account on the server and the file size was huge. I browsed the file and there was a ton of old e-mails in my mail file. I figured this is what was making it really slow to access my e-mails. So I went the the setting in Mail under the advanced tab that says: Remove Now. I clicked it and it took a long long time but then my mail file on the server was emptied. But when I went to access the message in the Mail program I would get this message in italics in the body of the e-mail:
    The message from Kathleen <[email protected]> concerning “Re: Tivo” has not been downloaded from the server. You need to take this account online in order to download it."
    I was online and all my e-mail messages had this exact message (with the name and subject different). Why is that. I thought POP meant it was suppose to download to my computer?

    Verify/repair your disk first (not just permissions), as described here:
    The Repair functions of Disk Utility: what's it all about?
    After having fixed all filesystem issues, if any, and making sure that there's enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
    1. Quit Mail if it's running.
    2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong -- e.g. by dragging it to the Desktop while holding the Option (Alt) key down.
    3. Locate Envelope Index and move it to the Trash. If you see an Envelope Index-journal file there, delete it as well.
    4. Open Mail. It will tell you that your mail needs to be "imported". Click Continue and Mail will proceed to re-create Envelope Index -- Mail says it's "importing", but it just re-creates the index if the mailboxes are already in Mail 2.x format.
    BTW, you haven't answered which mailbox has the problem. I could be that just rebuilding that mailbox fixes it -- you should verify/repair the disk and make a backup copy of the Mail folder first, nevertheless, though.
    Note: For those not familiarized with the ~/ notation, it refers to the user's home folder, i.e. ~/Library is the Library folder within the user's home folder.

  • How to Make Hair Appear in Front of and Behind an MC Object?

    Hello again,
      I am making a character with lots of hair. I would like to know how to make the hair appear both in front of and behind the Movie Clip object.
      I'll explain further. I have the "frontHair" connected to the "head" MC. When I pivot the head, a bare spot shows in an outlined shape of the arms/legs/torso. I thought I'd remedy this by making "hairBack" and then layer it behind the object. This opens up a can of troubles.
      I can't seem to get the "hairBack" to appear behind the torso and arms. Also, the "frontHair" is now blocking me from grabbing onto the arms and legs.
      It's crucial that this character has all of the hair, but I can't seem to figure out how to make it happen.
      Please, help!
    Thank you,
       Mike
    p.s. While returning from a beer run, I thought about masking. I'm still trying to work out the logic on this one.

    Thank you for replying. II didn't know which specific layers and objects you were referring to, but I figured out the problem I was having.
      I used only one newly created "hair" object and set it to "Guide" to get it out of the way (in a sense). I then selected all the body parts (movie clips) that I could and selected "Move to Front" for each one. I used the Selection Tool to move the head (with connected hair) out of the way. After doing this I was able to select the "torso"; which was previously hidden behind the Armature Layer. I then put the head back in place and I was set to roll.
      Ah, but then I encountered another error. My animations are set to 24fps, but they are moving at least 10 times slower. This happens within Flash and in the exported swf files.
    The topic deals with "text field variable names" errors and compiler errors dealing with "Symbol 'fps' ".
    This is the address to that topic. http://forums.adobe.com/thread/1009225
    Thank you (again),
      Mike

  • How to make a selection in one photo and move it to another photo

    I have always used Photoshop Elements, from 7 up to 12.  I just bought Photoshop CC.  I am totally confused over it.  There's not photo Bin, that is where I use to drag from the open photo down to the one I wanted the selection in.  I tried doing it
    by making the pictures smaller and dragging them down to the bottom, but then things got messed up and every time I opened another photo to use it open on top of the previous one.  To me this is important as this is what I have done
    in Elements all the time.  I can learn the other stuff about Photoshop later, but this one thing is important to me to be able to figure out.  I make pictures for people who have lost their pets or for birthdays and use a lot of digital scrapping stuff in
    them.  It's always been easy to do so, but now I am totally in a daze over how to do it.  Always wanted Photoshop, but I only have 30 days to decided if I like it and if I can't figure this one thing out I will have to return the program.  Can someone
    point me in the right direction for some tutorials on how to do this one thing?

    Oh,  and I'm not sure what you mean Load Files into Stack.  ??????
    In the menu Edit there is an item Scripts and there is an Item Load …
    If you want to rescale, rotate, … parts of your composition you should work with Smart Objects.
    So see if Photoshop > Preferences > General > Palce or Drag Raster Images as Smart Objects is checked and then use File > Place to put the elements into your layered file.
    Whenever you need to adjust one select it in the Layers Panel and invoke Edit > Free Transform (cmd-T).
    The advantages of Smart Objects are numerous:
    • multiple instances of a SO in a containing document that update simultaneously on saving an edited SO (please note that for a SO to maintain a connection to the external file one needs to use File > Place Linked instead of File > Place Embedded )
    • the possibility of placing vector content as Vector Smart Objects (though this will output as pixels)
    • non-destructive application of Filters
    • non-destructive application of transformation, warp, puppet warp (not all of these are available for Vector SO, but by converting such a one to a regular SO they become applicable)
    • combination of elements of different color spaces
    • the ability to Replace Contents of SO (for example when faking as-of-yet non-existent products by mapping packaging design elements onto images of a blank container and the design is likely to change)
    • Stack Modes for certain combinations of photographic images

  • How to use cfdocument  create a PDF file and save the file in server?

    Hi,
    I want to use cfdocument to create a PDF file and save it in
    the server for other people to download,can you give me a idea how
    to do this.Thanks.
    <cfdocument format = "PDF" pagetype="A4"
    orientation="portrait">
    </cfdocument>
    Mark

    Hi
    <cfdocument filename="" format = "PDF" pagetype="A4"
    orientation="portrait">
    </cfdocument>
    Give the physical path to the filename. You have write
    permission for this folder to create a PDF file.

  • How i make the partitions in my hard and when make recovery windows not deleted

     i hope find solution for it i have windows 8 recovery in my laptob that have harddisk 1000 gigabite 
    i want make the (c) partion and the recovery partion and 1 other partion i make it but when i make the recovery the windows back my partions to the rest so i want to make the recovery without rest my hard and remove my files for example in my new partion (d) 
    i make that new partion and put all my data on it but when i renistal my recovery windows it delete the partion and my data so i hope find solution to how let my laptop not remove that partion and the data on it 
     thanks

    the partion i want make i don't want the widnows remove or delete files on him when i make backup the recovery 

Maybe you are looking for