How to make Internet commerce with the MacBook Pro in the program iWeb. I've made since and would like to make it possible to pick the next act with debit cards. Is there anyone who can help?
How do I make Internet commerce with the MacBook Pro in the program iWeb. I've made the website and would like to ad a site where it possible to commerce with debit cards. Is there anyone who can help?
Some info on this and the following two pages...
http://www.iwebformusicians.com/Internet-Music-Sell-Distribute/Website-Buy-Page. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."
Similar Messages
-
Hey. I can not sync my iphone with my macbook air. It will not download my purchased music. Writes that there was an unknown error (-42408). Is there anyone who can help me.
Sincerely jimmiHey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David -
I have installed ios7 on my iPad 4. After installation it asked me a pass code which I have never set. After multiple attempts it is disabled. I don't have backup on my iCloud or iTunes. Is there anyone who can help to enable it or to reverse iPad to ios6. I asked Apple store & tech said to format it but I will lose all the data..!
Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
Thanks -
I have a problem, i can't change my lockscreen wallpaper? Doesnt work...is there anyone who can help me regarding this problem? Thx
To help, we need more detailed information.
--What steps are you trying?
--What does the device tell you (any pop-ups or messages)?
--Are you able to change the Home screen wallpaper, or is that affected too?
--Are you the phone's owner/administrator, or is this a device used for work (assigned/administered by IT staff, possible on an Exchange server)?
--Have you jailbroken the device? -
Is there anyone who can help me? my Photoshop CC is keep crashing, it doesn't show any error message. Suddenly " program stop responding" after few seconds of launch.
If Photoshop crashes the should be a System crash report generated by your OS. For example Windows
-
Is there anyone who can help me to design a index page
Hi guys
I would like to design a index page like this site :
http://www.hostplate.com
Is there anyone who can help me ?Your example site is built with WordPress (a popular open source framework).
You'll need to have a good working knowledge of HTML, CSS and some familiarity with PHP code & the ability to set-up a MySql database on your server. The good news is that there is a wealth of on-line information available to you.
HTML, CSS, PHP Tutorials - http://w3schools.com/
Getting Started with WordPress - http://codex.wordpress.org/Getting_Started_with_WordPress
If all this is outside your comfort zone and you're prepared to hire an experienced web developer to help you,
feel free to contact me through my web site: http://alt-web.com
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
Why the apple store taken more amount more than the amount written on their prices? Is there any one who can help me to contact the apple customer services. Thanks!
Some country's might not include tax in their prices, and if you changed or added your credit card details whilst making the purchase then a small temporary holding charge may also have been placed - in which case that should disappear within a few days (http://support.apple.com/kb/HT3702). Some apps also then allow you to make in-app purchases (though you can disable that via Settings > General > Restrictions)
-
Is there anyone who can help me out in this!!!!
Trying this for the fourth time........
Hi gurus,
I have posted this thread earlier also but didnt get any response, so I was just wondering did I ask something unrealistic?
Hi gurus,
I am working on an interface where I will be getting the production order number and then based on this order number I need to update some fields in transaction code ... CO11N...such as Quantity produced, reason of variance, batch number and posting date. So what I believe is first I need to pass the order number to the BAPI_PRODORD_GET_DETAIL to get the details of the production order and then update the production order by using the BAPI_PRODORDCONF_CREATE_TT, but my problem is I am new to ABAP I got to know what should be the process but I am not being able to implement it. So basically the program needs to pick the data from the internal table and copy it in SAP. My internal table looks liks
data : BEGIN OF it_input occurs 0,
order_no like afko-aufnr, "Order Number
opr_no like afru-vornr,
quant like afru-lmnga,
varian like afru-grund,
budat(10) type c,
matnr like caufvd-matnr, "Materials
erfmg like cowb_comp-/cwm/erfmg,
charg like mcha-charg,
END OF it_input.
So can you please help me out in this..I mean step by step or if there is any other suitable way.
Thanks,
Rajeev .......Rajeev,
Based on your post, just may not be clear what you are asking for then.
I think your general approach that you have described is correct. Without knowing the source of your data for the internal table, it is hard to completely provide an answer but a typical interface might look something like this:
1. Selection screen with parameters for the file name (If a file is the source of your data)
2. Load data from the file into your internal table.
3. Loop at your data
4. Call the Get Detail BAPI
5. Using the data returned from the get detail BAPI and your internal table create the importing, exporting, tables parameter for your Create BAPI.
This step might need some more clarification. I am not sure if you are using the right BAPI for what you are trying to accomplish. First this appears to be a Create function and not a change, second, it appears that this is for Time Ticket information against a production order. I haven't used any BAPIs for production orders before so I can't give you a definite answer. If you cannot find an appropriate BAPI, you might also try creating a BDC/Call transaction update.
6. Review the error messages/return code from your production order change
7. Output some type of report to the user regarding successful updates, errors, etc.
I hope this helps provide some guidance.
Best Regards,
Chris H. -
please help
Rajeev,
Based on your post, just may not be clear what you are asking for then.
I think your general approach that you have described is correct. Without knowing the source of your data for the internal table, it is hard to completely provide an answer but a typical interface might look something like this:
1. Selection screen with parameters for the file name (If a file is the source of your data)
2. Load data from the file into your internal table.
3. Loop at your data
4. Call the Get Detail BAPI
5. Using the data returned from the get detail BAPI and your internal table create the importing, exporting, tables parameter for your Create BAPI.
This step might need some more clarification. I am not sure if you are using the right BAPI for what you are trying to accomplish. First this appears to be a Create function and not a change, second, it appears that this is for Time Ticket information against a production order. I haven't used any BAPIs for production orders before so I can't give you a definite answer. If you cannot find an appropriate BAPI, you might also try creating a BDC/Call transaction update.
6. Review the error messages/return code from your production order change
7. Output some type of report to the user regarding successful updates, errors, etc.
I hope this helps provide some guidance.
Best Regards,
Chris H. -
Is there anyone who can help me in alv
hi frns,
i have a problem in alv.
i have 4 columns in alv and the requirments is such that
the 4th column is empty but as soon as i selcet an item in 2nd column with f4(which i have defined in catalog) help its corresponding description should come in 4th list
pls help me .Refer the threads -
Re: ALV F4 help
ALV Grid values updation using F4 values
Regards,
Amit
Reward all helpful replies. -
Hallo,
Nieuw op dit forum toch gelijk al een brandende vraag: wij hebben na jarenlang 2 Power Macs G4 gedeeld te hebben nu een iMac G5 aangeschaft die we dus samen met de G4 willen delen. Nu krijgen we alleen de oude Mac niet meer opgestart. Verscheidene toetscombinaties geprobeerd maar niets werkt. Afwisselend krijgen we een blauw scherm met pijlen of een grijs scherm met een map met vraagteken. Iemand een idee wat we kunnen doen? Apple zelf ondersteunt niet meer apparatuur van 7 jaar en/of ouder. Mogelijk ligt het ook aan het netwerk of heb ik iets niet goed aangesloten. De iMac G5 draait ook onder 10.4.11.
Elke hulp is welkom!
Groeten en dank alvast.Dutch to English translation
Hello,
New to this forum as it has a burning question: after years we have 2 PowerMac G4 divide have now bought an iMac G5 so we want to share with the G4. Now we get only the old Mac does not boot. Several combinations tried but nothing works. Alternately, we get a bluescreen with arrows or a gray screen with a folder with question mark. Any ideas what we can do? Apple itself does not support more equipment from 7 years and / or older. It is also possible to the network or something, I have not connected. The iMac G5 also running 10.4.11.
Any help is welcome!
Regards and thanks already.
Try holding the Option/alt key down at bootup, does the Startup Manager show any Drives to boot from?
English to Dutch translation
Probeer het houden van de Option / Alt toets ingedrukt te houden bij het opstarten, is de Startup Manager toont alle schijven op te starten vanaf?
Can you boot from your Install CD/DVD by holding the c key down?
English to Dutch translation
Kunt je opstart van je installatie CD / DVD en houd de c toets ingedrukt te houden? -
Is there anyone who can help me out in shopping cart creation by FM?????
Hi Guys,
I am trying to create a Shopping cart in SRM system executing the RFC from External system.I am trying hard to solve this issue since last 1 months and still i am not able to do that.plz help me out its very urgent now.
I am trying to use BBP_PD_SC_CREATE in combination with BBP_PD_SC_SAVE and Commit.
Here Below i am mentioning what all fields i using to pass the data, and what all errors i am getting after executing the function Module.
Please check it and tell me where exactly i am doing mistake.
FM ---> BBP_PD_SC_CREATE
I_REF_GUID 00000000000000000000000000000000
I_PARK X
I_SAVE X
I_HEADER
GUID 00000000000000
DESCRIPTION TEST
CURRENCY USD
PROCESS_TYPE SHC
I_ITEM
GUID 00000000000000000000000000000000
PARENT 00000000000000000000000000000000
NUMBER_INT 0000000001
NUMBER_EXT 0000000000
PRODUCT 00000000000000000000000000000000
DESCRIPTION MONITOR
CATEGORY 00000000000000000000000000000000
CATEGORY_ID 65.10
QUANTITY 1.000
UNIT EA
PRICE 1.00
PRICE_UNIT 1
GROSS_PRICE 1.00
CATALOG_PRICE 0.00
CURRENCY USD
PRODUCT_TYPE 01
LOGSYS_FI CFG300
BE_LOG_SYSTEM CFG300
BE_PLANT BUS1
BE_MOVE_REAS 0000
BE_PUR_GROUP W01
BE_PUR_ORG IBRD
BE_CO_CODE IBRD
BE_DOC_TYPE ECPO
BE_PACKNO 00000000
BE_INTROW 00000000
BE_PO_PRICE 1
I_ACCOUNT
GUID 00000000000000000000000000000000
P_GUID 00000000000000000000000000000000
DISTR_PERC 100.00
ACC_NO 0001
ACC_CAT CC
SRC_GUID 00000000000000000000000000000000
G_L_ACCT 500411060
BUS_AREA VTRS
COST_CTR 6589
SDOC_ITEM 000000
SCHED_LINE 0000
CO_AREA WBG1
PROF_SEGM 0000000000
CMMT_ITEM 500411060
FUNDS_CTR 6589
FUND BB
I_PARTNER
PARTNER_GUID 000000000000000000000000
P_GUID 000000000000000000000000
PARTNER_FCT 00000039
PARTNER_NO
ADDR_TYPE 1
ADDR_ORIGIN A
ADDR_NO 10735
PARTNER_ID 1058
same like i have passed 3 more partner details.
I_ORGDATA
GUID 0000000000000000000000000
P_GUID 0000000000000000000000000
PROC_ORG_RESP_ID 50000641
PROC_ORG_ID 50000640
PROC_GROUP_ID 50000641
When i execute it, i am getting error like
"Interface Data Contains error"
"Incorrect Interface Data for set PDDEP"
"Incorrect Interface Data for set PDDYN"
"Incorrect Interface Data for set PDFRT"
"Incorrect Interface Data for set PDHCF"
"Incorrect Interface Data for set PDDEP"
"Incorrect Interface Data for set PDORG"
"Incorrect Interface Data for set PDDEP"
"Incorrect Interface Data for set PDTAX"
"Incorrect Interface Data for set PDDEP"
"Incorrect Interface Data for set PDTOL"
"Incorrect Interface Data for set PDWGT"
"Enter Atleast one item for one limit"
Thanks alot.
GRTZ.
Regards,
Manoj TiwariHi,
before I would try to save a SC to the database, I would check how I have to fill the interface. Therefore I would suggest to read at first a SC from the database with FM BBP_PD_SC_getdetail. With this example of an existing SC you should be able to will the interface correctly.
E.g. when you check an existing SC with FM BBP_PD_SC_getdetail you see that some parameters are missing in your I_ORGDATA part. The I_ORGDATA part of my SC example looks like the following:
PROC_ORG_RESP_OT O
PROC_ORG_RESP_ID 92001699
PROC_ORG_OT O
PROC_ORG_ID 92000053
PROC_GROUP_OT O
PROC_GROUP_ID 92001699
Here you can see that you forgot the whole *OT parts! In your case the system doesn't know that you mean an orgunit.
As I mentioned above, when you know how a SC looks like on the database, it should be easy to fill the FM interface.
Best regards
Dennis -
Please is there anyone who can help me?
Hi there,
A few days ago i wrote a thread in project swing forum about a problem that i have with the JFileChooser and the fact that i am not able to set the focus to a different JComponent...
http://forum.java.sun.com/thread.jsp?forum=57&thread=200362
I am using Java sdk 1.3 and i know that this problem is already documented in the bug database however the work-around concept does not seem to work...
http://developer.java.sun.com/developer/bugParade/bugs/4373112.html
Which is what i am currently trying to do...
Could please anyone help me with this?
I am really sorry for anoying everyone with this but i tried twice in the swing forum and nobody seems to know any work-arounds...
Please help!
Kind reagrds,
JohnIn order to change component that takes the focus when the JFileChooser is shown you have to change it after it has been shown using chooser.showOpenDialog(null) (for instance). As it is shown in a dialog, you don't have the chance to access the chooser in this thread. Don't worry I am not about to demonstrate a wild way to do this with threads and such rubbish.
The way to do it is to add a ComponentListener to the file chooser before you show it.
java.awt.ComponentListener interface exposes 4 methods.
componentHidden(ComponentEvent ev);
componentMoved..
componentResized..
componentShown..
so, all you need to do is implement the 4 methods like this
chooser.addComponentListener(new java.awt.ComponentListener() {
// Methods missed out for brevity
public void componentShown(ComponentEvent ev) {
// Do your thing to find the component and have it take the focus,
then show the chooser.
I cannot guarantee that this works as I have not tried it however that should do the job. Focus cannot be changed until the component is actually visible so... -
I am having a weird problem while attempting to re-install iTunes, is there anyone who can help?
Its kind of an odd problem, never happened to me before, but my old iTunes was very outdated because my updater was not working, and today having to actually use iTunes but it was very outdated, I read on the apple support site that the only way to update my version was to delete and re install.
Upon completely deleting iTunes and all other related software (following the steps given here:http://support.apple.com/kb/HT1923), and then installing the latest version of iTunes from the apple site, I still receive the very same error message about a quarter way through the installation saying 'Error, object already exists', and when I click ok it pops up a few more times until the iTunes install wizard says there was an installation error and to either finish or try again.
I really need to use iTunes asap for some important business so any help would be much appreciated.
Additional info:
Operating system is Windows 7
Computer is a Dell
Downloaded using Google ChromeFor general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if iTunes won't install normally.
tt2 -
Is there anyone who can help me?
I am using the jdbc and to access mysql. Here is the part of the code:
Class.forName("com.mysql.jdbc.Driver");
String url = "jdbc:mysql://localhost:3306/e-trading";
Connection con = DriverManager.getConnection(url);
String insertstr="insert into negotiation (buyer_id,supplier_id,product_id,subject,content,date) values (?,?,?,?,?,?)";
PreparedStatement pstmt=con.prepareStatement(insertstr);
pstmt.setInt(1,Integer.parseInt(info[2]));
pstmt.setInt(2,Integer.parseInt(info[1]));
pstmt.setInt(3,Integer.parseInt(info[0]));
pstmt.setString(4,info[3]);
pstmt.setString(5,info[4]);
pstmt.setDate(6,date1);
pstmt.executeUpdate();
pstmt.close();
con.close();
After run the object,following error message are shown:
SQLError Message: Syntax error or access violation: You have an error in your SQ
L syntax. Check the manual that corresponds to your MySQL server version for th
e right syntax to use near 'values (0,0,2,'ggh','sgsdfg','2003-05-04')' at line
1
SQLError status: 42000
SQLError code: 1064
I just can;t solve the problem..could someone help me?date is a reserved word in mysql, you seem to have used it to describe a column name,try changing that it may work and secondly try
Class.forName("com.mysql.jdbc.Driver").newInstance() in line 1 of your published code
Maybe you are looking for
-
I like the layout feature but I don't want my site to look like a bunch of gray boxes all the time. I tried the style attribute on the border but it doesn't seem to work for me. I can't seem to hide the default gray border or change its color. How ca
-
Any help would be greatly appreciated!
-
Create RESTful web service with CSV format (bug??)
Hi All: I am using APEX 4.2.2 with APEX listener 2.0.2. I have create a RESTful web service to retreieve some data from a table. The format is "CSV" (the other option is JSON, which I am not faimilar with). then I tested and it generate with below sa
-
Creating a High Resolution DVD in Encore 2.0 built in AfterEffects
I recently created a high resolution 2 minute movie in After Effects and rendered at a fairly high resolution (Composition size is 1650 x 1275) with Sorensen 3 with high quality settings. The final movie is 1650 x 1275 and about 300mb, it plays great
-
Acknowledging individual message, leaving others in the queue
Hi, I am trying to find a way to acknowledge some messages while leaving others on the queue but when I do call m.acknowledge() on the message I want to ack all the messages previously received are removed from the queue. I have read the doc and it s