How to make JDev aware of the xmldb API

Hi everybody,
I am a real beginner in Jdev, and I have to develop a
Java Application using Oracle Java developer, against
an XML-native database called eXist. I'll have to use
a java API called xmldb supported by eXist in order to
interact with the database. Although I have basic
knowloedge in Object-oriented programming, but I don't
know where to begin, especially how to make JDev aware
of the xmldb API, and how to create classical
application components (Windows, buttons, etc).
Could you help me with some orientations and
interesting links?.
Thanks a lot.
Mounir.

Hi,
don't know this database, but the database vendor should be able to explain how his DB is accessed from Java. If this requires libraries, then the vendor will provide these in JAR files, which you then configure with JDeveloper (as a custom library Tools --> Manage Libraries) or in the Project
If there is a JDB driver for it, even better. This however is not a deliverable of JDeveloper but the database vendor
Frank

Similar Messages

  • How to make text start at the top of a page in livecycle 9

    Hi, How can I get the text in a large text field to start at the top left of the field rather than at the center of the field? In addition, may one know how to make text wrap in the form as well?
    Thanks,
    David

    To set the Text alignment properties use "Paragraph" pallet you can make it visible by selecting Window>>Paragraph or Shift+F5
    And to allow text wrapping you need to select "Allow Multiple Lines" checkbox under "Object" pallet and "Field" tab. You can make Object pallet visible by selecting Window>>Object or Shift+F7.
    Good Luck,

  • I subscribed for itunes imatch - it works perfectly on my i-pad and iPhone - however on my macbook - my iTunes can no longer find my songs - i don't know how to make it look to the cloud to play my music

    i subscribed for itunes imatch - it works perfectly on my i-pad and iPhone - however on my macbook - my iTunes can no longer find my songs - i don't know how to make it look to the cloud to play my music - i think it keeps trying to find on the external harddrive where i used to keep my music

    Of course iTunes is looking for the music on the external HDD. Enabling iTunes Match does not magically change the location of the iTunes library to the cloud.
    To play the music either plug the external HDD back into your computer or create a new, empty library to use for streaming the iTM content. The latter can be accomplished by holding down the Option key when launching iTunes, choosing "create library" then enabling iTunes Match on the new library. DO NOT have iTunes scan your HDD for music.

  • How to make users to select the date from calendar control my making the date field read only in date time control in external list in sharepoint 2010

    How to make users to select the date from calendar control only, by my making the date text field read only (don't want to let users type the date) in date time control in external list in sharepoint 2010. I am looking for a solution which can
    be done through sharepoint desginer / out of the box.
    thanks.

    Congratulate you got the solution by yourself. I am new to a
    WinForms calendar component, I feel so helpless on many problems even I'd read many tutorials. This question on the
    calendar date selection did me a great favor. Cheers.

  • How to make a restart of the workflow in a process controlled workflow?

    Hi Experts,
    How to make a restart of the workflow in case of process controlled workflow? Scenario is like this:
    The user has created a shopping cart with 1000 USD. The process schema has three process level with the first level being approval with completion.
    The first level being executed by the responsible purchaser. Here, the purchaser adds the source of supply and changes the price of the shopping cart 2000 USD and approve the shopping cart.
    Now, I want the approval task to start from beginning so that the requestor can know the changes and accept/reject the changes.
    Thanks and regards,
    Ranjan

    Hi,
    Restarting workflow goes to 1st level approval step. It is not requester.
    I think you need to set condition for "Acceptance by Contact Person" in Define Process Level.
    Regards,
    Masa

  • How to make a backup if the Storage & Backup icon is missing?

    how to make a backup if the Storage & Backup icon is missing?

    http://www.apple.com/icloud/setup/ios.html
    Sounds like you have an account, so two options I would say.
    Try turning it off, then off and see what options you get, or sync your phone to iTunes and click on the summary and choose the iCloud option.

  • How to make every account in the system login automatically?

    How to make every account in the system login automatically when Mac OS X startup?
    Thanks!

    I can see one way to do it. You'll need to install a script in each user account, and have it set as a login item for each user. Let's imagine you have three user accounts. Each user in Mac OS X has a UID number. Normally your first user has the UID of 501, the second one will be 502 and so on...
    You can determine the UID by running the following AppleScript while logged in on each user:
    do shell script ("ID")
    This'll return a long block of text, but right at the start you'll see the UID number. Let's assume your three users have the UIDs 501, 502 and 503. We begin with 501.
    Create the following script and save it as an application while logged in as 501. Note that the password you're entering is the password for UID 502. Also note that the forum system is creating line breaks where there shouldn't be any. The long "do shell script" line should be one line.
    delay 5 --This delay allows time for login to complete, but it may not be necessary.
    try
    do shell script "/System/Library/CoreServices/Menu\\ Extras/User.menu/Contents/Resources/CGSession -switchToUserID 502"
    delay 5 --This delay could be shorter or longer, depending on how fast your machine is.
    tell application "System Events"
    keystroke "password for 502" --the password for UID 502
    keystroke return
    delay 1
    end tell
    on error
    display dialog "Unable to switch user."
    end try
    Open System Preferences, go to Accounts, click "login items" and drag your script (saved as an application) to the login items window.
    You basically repeat this process for each user account, modifying the script so it switches to the next user.
    This isn't ideal, because your passwords will be stored in the scripts, and each user could open the scripts and learn the passwords of the other users on that machine.
    I picked some of this up from a discussion over at the Macworld forums:
    http://hints.macworld.com/article.php?story=20031102031045417
    Message was edited by: The Preacher
    Message was edited by: The Preacher
    Message was edited by: The Preacher

  • HT4623 How to make Google Maps as the default Map App in my iPhone 5

    How to make Google Maps as the default Map App in my iPhone 5, so that I could still use the old bookmarks and use the pins to drop, Please assist.

    You cannot make Google Maps the default mapping app.

  • How to make Excel, Word, Powerpoint the Default programs?

    Hey guys,
    Just got my new MBP, and I need to know how to make Excel, Word, Powerpoint the default programs when opening one of their files? Currently, the trial version of Iwork opens the programs which drives me crazy.....
    So, for example, for an Excel file, I want Excel to open it, NOT Numbers......etc....
    Thanks In advance.
    JW

    Select a file of that type in the Finder, choose Get Info from the File menu, change the Open With entry for it to the desired application, click on Change All, and confirm the action.
    (47808)

  • I reset my phone and it now receives calls that were meant for my husband. I know how to fix this with messaging and facetime, but can't seem to find how to make it stop with the calls. Please help.

    I reset my phone and it now receives calls that were meant for my husband. I know how to fix this with messaging and facetime, but can't seem to find how to make it stop with the calls. Please help.

    It may be due to Continuity
    The following quote is from  Connect your iPhone, iPad, and iPod touch using Continuity
    Turn off iPhone cellular calls
    To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls.

  • How to make Nokia Suite remember the position and ...

    how to make Nokia Suite remember the position and the size i set it?
    because everytime i start it, it defaults in the middle of the screen and in the smallest possible size.
    Nokia Suite 3.3.86
    Windows Vista
    Greece Nokia X6 RM-559 v40.0.002

    Again, are you talking about genuine Nokia firmware, not any of some 3rd-party customised versions?
    For officially released firmware, you may force Nokia Suite to reinstall even if your firmware is already up to date. This feature might be missed in its GUI as its link is "hidden" in the prompt message, not on a button or highlighted with underscore. Try Nokia Suite, once the phone is connected, click the icon of Software Update on the top, then click the word "reinstall" in the prompted message.
    bbao
    * If this post helped you, please click the white Kudo star.
    * If this post has solved your issue, please click Accept as Solution.

  • How To Make My New MacBook The Main Base Of My iPad, iPhone?

    I just got my new MacBook Pro, and i'm transefing all my applications for iPad and iPhone, music and my photos to my new computer using a Seagate Hard Drive. Anyway, i connected my iDevices to my computer and i do not know how to make this computer be the Mac that transfes everything instead of the old one. When i go to my iPad settings, under general, i go to Wi-Fi Sync and it says i can sync it when 'GABE' is available (that is my old computer). I want it to be my new one and be able to sync with no problems and without loosing my imformation from my iPad and iPhone apps. (For example, i don't wanna loose Pages documents, Garageband songs and FL Music Studio files)
    Please help, if you have any questions into what i need please ask, this is a hard question to explain! Thank you so much.

    That's fine as long as you never want to host any other content on www.domain.com
    Personally I would have setup a separate site such as webmail.domain.com that points to the Squirrelmail directory, and setup a redirect so that hits to the top page of www.domain.com get redirected to the webmail site.
    That way you preserve www.domain.com to still be free for other web content, yet still make it easy for users to get to webmail.

  • How to make Clsuter aware EJB

              Platform: Weblogic 6.0sp2 in WINNT
              Hai,
              I have made IP loadbalancing ( The DNS Host entry swaps IP in intervals) as per
              the documentation. By Using the clsuter IP i have created a cluster entey in the
              wl 6.0 console and added two servers in the Cluster. Now i don't know how to make
              my EJB Cluster aware?. what parameters should i change in teh XML file and compilation
              option to make it cluster aware.
              Also i would like to know whether Will it be enough if i put teh same copies of
              JSP and servlets in both machine to make that too cluster aware. Will there be
              any probelm in session ?
              Regards,
              srini
              

              Hi Kumar , Lynch , Penfriend,
              Thanx for ur Quick replies .. That helped me a lot.. I am going through the examples.
              I would like to know changes that i have to make on JSP & servlets to make it
              cluster aware. I am using the IP Load balancing ( host name refers to two different
              IP at intervals ).
              Thanx.
              regards,
              srini
              Pen Friend <[email protected]> wrote:
              >Srinivasan,
              >
              >We ship a cluster example in .\samples\examples\cluster\ejb. You could
              >take a look at the deployment descriptors and try running it.
              >
              >
              >
              >Kumar Allamraju wrote:
              >
              >> By default ejb's are compiled with clustering options ON.
              >> So ejbc generates cluster aware stubs anyway. You don't need
              >> to do anything to deploy them in a cluster environment.
              >>
              >> --
              >> Kumar
              >>
              >> Srinivasan wrote:
              >>
              >>> Sir,
              >>>
              >>> (1) What option of the weblogic ejbc is required in my case. is
              >>> -clusterable
              >>> option suffice. Sir, Could you please mention which document are you
              >>> refering
              >>> too. ( I have only the cluster.pdf from BEA )
              >>>
              >>> (2) The Host name is already load balanced by teh WLBS Software.If
              >>> the host is
              >>> load balanced then will placing the same JSP and servlet in both the
              >>> servers in
              >>> cluster suffice.
              >>>
              >>> Thanks for the Help sir.
              >>>
              >>> regards,
              >>> srini
              >>>
              >>> "Lynch" <[email protected]> wrote:
              >>> >Hi,
              >>> >
              >>> >1. You need to use weblogic's ejbc to compile your ejb jar file to
              >>> generate
              >>> > the stub classes.
              >>> >2. Web cluster demands load balancing and fail-over. You need to
              >do
              >>> lots
              >>> > of work yet. Maybe you could start with the docs.
              >>> >
              >>> >Hope this helps,
              >>> >Lynch
              >>> >
              >>> >
              >>> >"Srinivasan" <[email protected]> ¼¶¼g©ó¶l¥ó
              >>> >news:[email protected]...
              >>> >>
              >>> >> Platform: Weblogic 6.0sp2 in WINNT
              >>> >>
              >>> >> Hai,
              >>> >>
              >>> >> I have made IP loadbalancing ( The DNS Host entry swaps IP in
              >>> intervals)
              >>> >as per
              >>> >> the documentation. By Using the clsuter IP i have created a
              >>> cluster
              >>> >entey
              >>> >in the
              >>> >> wl 6.0 console and added two servers in the Cluster. Now i don't
              >>> know
              >>> >how
              >>> >to make
              >>> >> my EJB Cluster aware?. what parameters should i change in teh XML
              >>> file
              >>> >and
              >>> >compilation
              >>> >> option to make it cluster aware.
              >>> >>
              >>> >> Also i would like to know whether Will it be enough if i put teh
              >>> same
              >>> >copies of
              >>> >> JSP and servlets in both machine to make that too cluster aware.
              >>> Will
              >>> >there be
              >>> >> any probelm in session ?
              >>> >>
              >>> >>
              >>> >> Regards,
              >>> >> srini
              >>> >
              >>> >
              >>
              >
              

  • How to make Verizon aware of poor coverage area

    I live in a relatively densely populated suburban community and yet we have very POOR service coverage in our neighborhood.  I remember the days of frequently dropped calls.  But now I am accustomed to never dropping a call.  But lately, and it does seem like a recent phenomenon, I drop every call upon entering my neighborhood.  So, how can I make Verizon aware of this service frustration?  I am certain that others are equally frustrated with this experience and will be considering other carriers if something doesn't change. 

        Thanks for the details, @walanlove. I checked out the 28105 area and don't see any recent changes have been made or a slew of customers reporting trouble, but it is a fairly big zipcode. You mentioned this only happens when entering your neighborhood. What's a nearby cross street we can take a closer look at? I do see customers in the 28105 area have activated Network Extenders http://vz.to/IHRT6h to improve indoor coverage. This can help with dropped calls at your home.
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • How to make/save changes to the file - /etc/httpd/httpd.conf - in Terminal

    I'm new to Unix/Terminal and am attempting to make changes in the Apache Web server's configuation file - /etc/httpd/httpd.conf - so that I can use PHP locally. (The "LoadModule php4" has a "#" mark in front of it which I am attempting to remove.) This approach is suggested in the book "Dreamweaver MX 2004 with asp, coldfusion, and php." The book includes instructions on how to adjust the files using pico in Terminal. But the book doesn't explain how to work with Unix/Terminal to enable the right access permission to save the changes in Terminal. I've been able to make the changes in pico the book recommends, but I'm not able to save the changes. I'm the only user of the computer.
    Please advise how to be able to save the changes. Thank you!
    G4   Mac OS X (10.3.9)  
    G4   Mac OS X (10.3.9)  
    G4   Mac OS X (10.3.9)  

    jamesk,
    httpd.conf is owned by 'root'. therefore, to save your changes you need to use 'sudo' when editing the file. before you do that, you should type in
    man sudo
    and read about what sudo actually does. be aware that it can give you all-encompassing power to do many things - including messing things up.
    once you have read about sudo, first do (substitute full paths, if necessary - e.g. /etc/httpd/httpd.conf for httpd.conf)
    sudo cp httpd.conf httpd.conf.bak
    to backup your httpd.conf file (in case you make an error), then do
    sudo nano httpd.conf
    to make your changes, then save the file.
    then do
    sudo apachectl configtest
    to test changes to the server config (it should let you know if there is an error).
    finally do
    sudo apachectl graceful
    to restart the server and re-read the config file.
    cheers,
    b

Maybe you are looking for