How to make Lion Server alert a user of new calendar event on his iPhone?

Hi!
I'm trying to make the Lion Server alert / notify a user of new events that are added to his shared calendar... Using my own iPhone, I can add and edit events on his calendar and he can see them in iCal on his iPhone, but only if he manually launch the app. What I'd like to achieve is to have the app send out an alert--like it would with reminders and apps like that--every time I add or edit an event on his calendar.
ps. Push notifications are turned on in the Server App.
Any help appreciated!
Thanks!

I solved my issue thansk to this post:
http://support.apple.com/kb/TS2481?viewlocale=en_US&locale=en_US

Similar Messages

How do i stop the alerts when I enter new calendar events

When I enter a new event in Calendar, it automaticly adds two alerts to it. One by email and one by text message. With every event, I have to go back to the event and change both of the alerts to "none". Going to Preferences - Alerts and "Turn off shared messages in Notification Center", it does not change a thing. This didn't happen until I started Snow Leopard.
Any help would be greatly appreciated.

The Desktop and Screen Saver preference panel has two parts and the Screen Saver section has a slider bar near the bottom: set that to Never (far right).
You might also want to use the sliders in the Energy Saver preferences, particularly putting the screen to sleep. Set that to the same as the Screen Saver otherwise a yellow warning triangle may appear. These settings are not the best, of course, so you might want to change back when your viewing is finished.

How to make Lion Server serve NTP

Is there a simple way to turn on NTP serving in Lion Server? In 10.4 it was just a check box, now it's invisible. Command line only now?

This can still be set with a checkbox.
You need to run Server Admin 10.7 either on the server itself or from a 10.7 client.
Select your server from the list in Server Admin and login to it. Select the server itself from the list of items available. In the General tab check Enable Network Time Server.
Hope this helps.
-Erich

How to make a reading implausible in user define validations?

Hi all,
Can any1 tell me how to make a reading implausible
in user define validations.
Regards,
Darshana.

I don't have an example at hand right now, but I've done this in the past.
If my memory doesn't fail me, one of the return parameters of the user-exit in which you have to make your validations has a parameter that let's you define (im)plausibility.
Edit: the user exit has:
EXCEPTIONS
PLAUSI_ERROR
So, raise this exception to get an implausible reading.
Hope this helps!
Kevin
Edited by: Kevin De Wilde on Jul 8, 2008 11:09 AM

How to make the server threadsafe (Please Help)

Hi to all,
I have urgent question, and any
reply will be welcome.
How i make my server that use rmi threadsafe,
i want that each request from clients,the
server will make a separate thread.
the ejb use jndi to do this, how can i do this in rmi
i want that a client will get a reference to a factory
object in the server, the factory object will create a
thread and will return the reference to the client.
Thanks,
dan

Hi Bill,
Thanks for your reply.
at the rmi specification it said that :
3.2 Thread Usage in Remote Method Invocations
A method dispatched by the RMI runtime to a remote object implementation may or may not execute in a separate thread. The RMI runtime makes no guarantees with respect to mapping remote object invocations to threads. Since remote method invocation on the same remote object may execute concurrently, a remote object implementation needs to make sure its implementation is thread-safe.
this is all what sun has to say about using
threads with rmi.
do you have any example for using rmi server
that handle concurrent access?
again,
lots of thanks for your help.
dan

How to make local server in j2me

hi can i anyone help me out to establish a local server. i am using netbeans and dont know how to make loca server and how can i make the connection. i know about socket connection, http connection and datagram connection but dnt know about server connection where i can register my midlet and recieve data from it and post it aswell.
Best Regards
Naseem Sarwar

hi
write a servlet on ur server side for handling clients data and also it response back once data to another..
and simply on clients write HttpConnection code for sending/receiving data ..
always think abt optimiztaion of data send/recieve for speed.
regards
Akash Kumar & Nagendra
[email protected]
[email protected]
Indiagames Ltd

How to start Integration server with the user XISUPER

Hi,
How to start Integration server with the user XISUPER?
Regards,

Mahesh,
In the post installation document, under Creating User XISUPER,
I see the following,
1.You must now log on to the Integration server host with the user XISUPER, to switch the initial password to a valid password.
2.You must restart the J2EE engine to transfer the user creation to the J2EE immediately.
I am unable to proceed here.Can you please help me to resume the post installation steps ?
Thanks,

How do I delete a calendar event in my iphone?

How do I delete a calendar event in my iphone? It allows me to "edit" the event but not to totally delete it. Or at least I can't seem to find a "delete" option anywhere!

Did you create the event somewhere else? A lot of time when u create it on lets say PC or mac, you wont be able to edit it unless its from the same device.
Its also possible its created under a mail account. I would suggest making all your events via icloud, then u should be able to edit it on all platforms regardless on which device made the event.

How do I get my calendar to sync on iCloud? I changed a calendar event on my iPhone 4 and it has not changed in Entourage on my MacBook. This is supposed to be automatic, isn't it?

How do I get my calendar to sync on iCloud? I changed a calendar event on my iPhone 4 and it has not changed in Entourage on my MacBook. This is supposed to be automatic, isn't it?

Entourage will not sync with iCloud, not now, probably not ever, time to change.

How do I enter a calendar event in my iPhone 4 iOS5 that repeats every third Thursday?

How do I enter a calendar event in my iPhone 4 iOS5 that repeats every third Thursday?

If you have Outlook 2007 on your computer you can set up the event to repeat every third Thursday on a calendar on your computer within Outlook. Then sync your iPhone with Outlook on your computer using iTunes.

How can I hide the time of the day in calendar events in OS 10.9?

How can I hide the time of the day in calendar events in OS 10.9?

Currently, the order in which the phone numbers appear (in a contact) is dependent on the sequence to which you enter them. There is no way to change that order other than re-entering them in the desired order.

How do I make Lion Server support more than one Time Machine disk?

Under Snow Leopard Server, I had two disks set up for Time Machine backups. This came about as I'm running a Mac Mini with the 500 GB internal drives which turned out to be insufficient for one of the connected Macs which uses a terabyte drive. I then added an external 6 TB drive and made it a Time Machine destination too. Worked beautifully. When I upgraded to Lion Server the external large drive was no longer available for backups and the interface for configuration within Server only allows for one drive to be in use at a time. Any suggestions (short on reverting to Snow Leopard) as to how to re-enable having both drives available for networked Time Machine access?
Thanks!

Hi Adam,
Before I even realised that the Server app had a setting for TM, I just configured TM backups on my (SL) clients as I had done in SL.
I shared the drive(s) on the server I wanted to use.
For each client, I mounted the appropriate shared drive containing its sparseimage file, then set TM on the client to use that drive.
Then I unmounted the shared drive and started TM.
It mounted the remote drive (without displaying it in Finder) and opened the sparseimage, showing the "Time Machine Backups" volume on the desktop.
So you could use any drive attached to the server to backup any client.
It worked fine for me.
In the end, I changed my clients to use the (single) shared "Backups" volume which Server.app creates because I can fit all my stuff on one drive.
HTH

Lion Server: All network users have disappeared

Hi,
A search through the forums and kbase didn't give me anything that mapped well to my problem. Here's the situation:
Specs:
Mac Pro (2008) 6GB RAM, SSD boot with space available, OS X Lion (latest) with Server.app
Services:
File Sharing
Users: less than 15—accounts only used for file server access.
This is the only server on the local network, all network routing is taken care of by a Meraki router.
I went to add a new user to our fileserver, and was unable to connect to the server over Apple Remote Desktop. At the time, file sharing from the server (I *believe*) was still working. I logged in with the file server's local admin account via SSH and tried to use Kickstart to get ARD running again—something I'm well versed in. The script ran as usual, but ARD could still not connect. So, as everyone was in a meeting, I tried to use `shutdown` to reboot the fileserver from the CLI, something I've also done in the past (but not frequently). Usually that takes about a minute to work, and then my shell disconnects—but after 5 minutes, the Mac had not rebooted.
At that point, I decided to walk to the server and manually force it down by holding the power button in. That powered off the Mac, and 30 seconds later, I booted it up.
Back on my Mac via ARD, I was able to remotely control it and got to the Fileserver's log in screen, which featured a red dot in the use field I'd never seen before. It's tool tip read "network users are currently unavailable" (paraphrased, perhaps). I logged in with the Fileserver's local admin user (as usual) and launched the Server.app, only to find that in the `Users` section, there were no users listed, and the plus and minus buttons were greyed out.
I tried rebooting but got the same results. I then repaired permissions and verified the boot drive. Lots of permissions repairs (as usual) but nothing improved. Another reboot after the permission repair and disk repair, just for safety's sakes… and as you can guess by me posting here… no improvement.
I'm not heavily versed in Server. I'm not even sure if those users are stored in a database, and where that DB would live. Does server make dumps or backups of the users on its own? Should I have been? Is this LDAP? Anyone have some next steps I can try? What info would be useful?
My first goal would be to recover a damaged DB. I only have just under 15 users, so re-creation isn't difficult. But, under the department of "I don't know a ton about Lion Server" I don't know if network users act like OS X users… where you could create a new user with the same username, but if their UID is different, then they won't have access to their owned files on the fileserver… is Server that exacting? Does it care who owns the file?
Thanks in advance for any ideas, or resources you can point me to!

It gets far weirder……
Now no one, myself included can log in.
Checking the logs, which I'll try to attach a small sample of here (Dropbox link below since you can only attach images here), I see repeated instance of both `opendirectoryd` crashing and respawning, and of server manager unable to authenticate:
1/19/15 4:57:06.658 PM com.apple.opendirectoryd: Assertion failed: (0 == (connection->flags & eODConnectionFlagSocketValid)), function __odconnection_connect_block_invoke_2, file /SourceCache/opendirectoryd/opendirectoryd-172.17/src/odconnection.c, line 988.
1/19/15 4:57:07.641 PM com.apple.launchd: (com.apple.opendirectoryd[13760]) Job appears to have crashed: Abort trap: 6
1/19/15 4:57:07.641 PM com.apple.launchd: (com.apple.opendirectoryd) Throttling respawn: Will start in 9 seconds
1/19/15 4:57:07.761 PM ReportCrash: Saved crash report for opendirectoryd[13760] version ??? (???) to /Library/Logs/DiagnosticReports/opendirectoryd_2015-01-19-165707_localhost.cras h
1/19/15 4:57:17.276 PM PasswordService: -[AuthDBFile getPasswordRec:putItHere:unObfuscate:]: user with slot 4873a20f-0cc0-f7c3-0000-000a0000000a not found. Result: 80 Other (e.g., implementation specific) error
1/19/15 4:57:17.277 PM AppleFileServer: _Assert: /SourceCache/afpserver/afpserver-585.7/afpserver/AgentSession.cpp, 856 (4294952813)
1/19/15 4:57:32.703 PM servermgrd: servermgr_accounts: got error 2100 trying to auth to local LDAP node
https://dl.dropboxusercontent.com/u/1344045/server-sample.log.txt

Steps to setting up email for Lion Server Alerts

Can anyone describe the steps to configuring email alerts on Lion Server? I see a place to enter the email address in the Alerts window but no messages ever get emailed.
Is there another setting I need to turn on to get the server to send email?

Hi all,
I arrived to active BI platform in sapnetweaver trial version 7.01, i follow this steps.
1/You need to login to 001 client as SAP* password minisap
2/Create your own user in SU01 transaction and log in with your own user.
3/Then run Administration workbench of BW (RSA1) and create and assign of logical system to your client,
4/replicate DataSources form its own BW system.
It's easy and simple.
Trial version had a limit, when i tried to create a transformation between a datasource an InfoObject i meet some trouble. Log message suggest to install frontend of sap netweaver to resolve this trouble.
This topic is close
Thanks Uday
Kinds Regards.
Souad

Mavericks server alerts and User account questions

Hi
I'm looking for more detailed information about setting up Alerts in Mavericks Server, plus I seem to have a strange problem with new user accounts when setting up.
More Info.
I have a Mac Mini acting almost 100% exclusively as a Time Machine backup device with encryption of three portable computers on a wired network. This was originally set up three years using Snow Leopard Server and a 2Tb external FireWire Drive.
The external drive is now proving too small, and in any case is showing the possible first signs of failure when tested, so the intention is to replace it with a RAID of some sort, probably a 2-drive RAID 1 device but if the budget allows we might be able to look at RAID 5 or 6 units.
It seems a good opportunity to clean install Mavericks Server on the Mini, so I've set up a test station on my MacBook Pro with my Mac Pro (both running 10.9.2) as a test backup client. The Server OS is on an external FireWire boot drive, and the TM backup folders are on another external, in this case a USB 3.0
For obvious reasons there does not seem to be any reason to turn on more services than absolutely necessary, so just Time Machine and File Sharing for the moment. All works well but I can't seem to get Alerts working. I've listed 3 different eMail addresses (all mine) for the alerts to be sent to, and I have two Admin Accounts for Notifications, both using the same AppleID I set the Server software up with. I've gone through the rather sparse setup help information carefully, and there is no information about additional services being required, although I did try setting up the Mail client (tested sending and receiving) on the Server and having it running whilst the backups were being tested.
As I said, the test backups went fine and when I disconnected the backup drive from the Server to simulate a failed drive the TM on the Mac Pro client showed an alert saying the backup drive could not be found. However, there were no emails or Notifications received, either on the Mac Pro or my iPhone from the Server.
There seems to be minimal amount of information available about the workings of Mavericks Server, but I have gone through what I can additionally find online about Mountain Lion Server, with no real indication of what it is that I am missing. The only instructions seem to be exactly what I've done, so your advice would be appreciated.
Another thing that puzzles me, is that when restarting the MacBook Pro I get all the Admin and Standard User Accounts (created in Server.app) showing at the login screen. This is only four Accounts in total, so what would happen if this was 50 Users? If I click on the 'User' tab in Server.app I get 83 User Accounts showing, but that was not the case until this evening, as only the Admin and Stardard User Accounts I had set up were visible.
It's obviously possible that I've mucked up the install and basic setup somehow, but I can't see that anything I've done would have these effects as I've been careful to follow the options put in front of me.
Thank you in advance.

There's nothing to fetch. You assign the value from the function GET_APPLICATION_PROPERTY(USERNAME); as you would any value returned from a function.
DECLARE
myVar VARCHAR2(50);
BEGIN
myVar := GET_APPLICATION_PROPERTY(USERNAME);
END;Hope this helps.
Craig...
-- If my response or the response of another is helpful or answers your question please mark the response accordingly. Thanks!

How to make Lion Server alert a user of new calendar event on his iPhone?

Similar Messages

Maybe you are looking for