How to make my form be compatible with older adobe versions

Hello,
I created a dynamic form with adobe lifecycle 9. As users try to use the form, they get this error:
"This PDF form requires a more recent version of Adobe® Reader® or Adobe Acrobat® software. While this form may appear to be working, some elements may not function correctly or may not appear at all."
Is there a way to make the form be compatible with older adobe versions?
Thanks.

In the File Menu -> Form Properties under Default Tab, choose the Target Version of Adobe Reader that you expect users to have the minimum version.
If any of the functionality does not compatible with the selected version, then the warnings will be displayed under report tab. You can access it by going to Window menu -> Report.
Thanks
Srini

Similar Messages

  • How to make windows 8.1 compatible with dng converter 8.1?

    I have installed the DNG Converter 8.1 so that I can view/edit RAW files on Photoshop Elements 12, but Windows 8.1 states "the source folder does not contain any supported camera raw files".  I have an Sony Alpha 6000 (version 8.4), and have moved the RAW files into a folder on my C drive.  DNG Converter won't work even if I run it on Windows 8, is there no way to make Windows 8.1 compatible with DNG Converter 8.1? 

    From that faq:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    I see that you need the DNG converter 8.4 to convert Sony Alpha 6000 raw files.
    Download that version of the DNG converter to replace your version 8.1.
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh for Mac
    Adobe - Adobe Camera Raw and DNG Converter : For Windows for Windows

  • How to make UK Airport Express work with older US Time Capsule 5GHz?

    I just replaced two dead Airport Express units and the new one's fail to recognise the 5Gz network of my TC when try to set them up in AirPort Utility.  The other networks I have show up but since I reserve the TC 5Ghz exclusively for music streaming around house to AEX-attached speakers, not having the new models playing along is deeply frustrating. The TC was bought in US three years ago. The AEX are UK and brand new.  No problems at all with the other AEX units I have which all function perfectly.  These were also US models.  I'm fearing a change that prevents UK AEX from working with US TC 5GHz wifi.
    Any ideas?

    The US and UK will doubtless have different allowable 5ghz channels.
    Firstly set the country code in the TC if possible to UK although it might not appear on the list.
    Note to find the right page to enter country is simple.. start the manual setup.. in the find a setting box, type country.. the correct page will pop up. Change that to UK.. I suspect it cannot happen but try regardless.
    Someone else might like to comment if you can force the firmware upgrade to use the correct version from UK.. but maybe hard written into the firmware.. and only countries listed will be those in the region the airport is sold in. Time manufacturers got rid of regional distribution.. and just select anywhere in the world.
    If as I suspect no go on that one, just setup the TC to a wireless channel manually shared with UK. The problem now is the TC set to auto can choose a channel not allowed in the UK and therefore invisible to the UK Airport Express.. so lock the channel of the TC to one that is common.

  • HT5988 I downloaded Mavericks and now my WD Smartware that I use for Time Machine is no longer compatible with this OSX version?  How do I make that unit compatible?  olefromca

    I downloaded Mavericks and now my WD Smartware that I use for Time Machine is no longer compatible with this OSX version?  How do I make that unit compatible?  olefromca

    I agree entirely, been messing with this since the upgrade to Mavericks but I didn't find it quite as easy as uninstalling the WD smartware as it still operates when you plug the drive back in - I think it gets loaded onto the drive and runs from within (?). The advice from WD was that time machine was faulty and I should contact Apple...thanks guys!
    Anyway, for the OP's benefit, this is what I found:
    1. My problem was that time machine couldn't see any further back than before the Mavericks install, but if I opened up and interrogated the WD drive, the old backups were still there.
    2. When TM started doing new backups, it overwrote the ones that it could see, not the oldest ones on the drive. This indicated to
    me that the WD software had somehow partitioned off the old backups and excluded that part of the drive from being overwritten. Of course, as the drive was practically full, it meant that any new backups wouldn't fit in the available space.....
    3. The only way I could find to resolve this was to use the disc utility to erase and repartition the external drive. This will obviously remove all of the old files and backups, but I was more concerned about keeping a current profile as backup rather than a load of stuff from months ago.
    4. Anyway, what happens after the eraseure has completed is that you get the WD icon on the desktop, and you're invited to install the software - this means the software has now been deleted. Juts don't reinstall it, just let TM do it's backup and all is well.
    Usual disclaimers and warnings about keeping another copy of your system etc. obviously apply, and I know this is a radical move to delete all your old data but it worked for me. I guess I didn't appreciate that you could use the external drive without the software that came with it and just followed the screen guide.
    I'm also aware that if you don't want to use TM to do a complete restore and only want to find one old version of a document, this is difficult. However, you can then install the WD software and find the file but you'll then have to do this all again.....

  • Hi can anyone tell me how to make the forms url short to the end user

    Hi,
    Im using oracle forms 11gR2 and everything is working fine, but my question in how to make the forms url short to the end user.
    For example my forms url is  " http://localhost:9001/forms/frmservlet "  now i want to modify this url as   "myweb.gov.ae"
    can anybody suggest me the possibilities to change to default forms url to our own url as mentioned in the above example.
    Thanks & Regards,
    Hari

    You would have to either -
    * edit the code pointed to by the new action attribute to
    include the form
    processing and email generation, or
    * edit the form processing script to also include the insert
    record and
    check user name scripting
    The former is probably the better procedure, since I suppose
    you'd want to
    do the check user name before sending the email.
    Unfortunately, this means
    you will have to get your hands into the code, or hire
    someone to do it for
    you.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "ducati1" <[email protected]> wrote in
    message
    news:gkriis$et6$[email protected]..
    > Hi guys.
    > I have a page with a form on it here.
    >
    http://www.thechallenge.net.au/superredemption.php
    > I want the data placed in the textfields within the form
    to come to me in
    > an
    > email upon submission.
    > Now normally I would action the form to use this page
    here
    >
    http://www.thechallenge.net.au/Redemptionform.txt
    > But because the action of the form is now <?php echo
    $editFormAction; ?>
    > due
    > to an insert record and check user name server behavior
    I cannot use my
    > normal
    > method.
    > Can anyone tell me how I can get around this problem?
    >

  • How to make a list item field with DATE data type?

    I have a column with DATE data type. Using forms 6i I want to generate a poplist list item field with this column while the value of the elements in the list to will be day names like SATURDAY,SUNDAY,MONDAY. if we change the data type from date to char, it will work properly but now with DATE data type behind it, it gives the following error message
    "FRM-32082: Invalid value for given item type.
    List WEEKREST
    Item: WEEKREST
    Block: EMPRESTS
    Form: MODULE3
    FRM-30085: Unable to adjust form for output."
    Using forms 6i how to make a list item field with DATE data type which can hold day names?

    Set your date column as a hidden (non-displayed) field. Create your list item with the varchar2 day names. Create the list item as a non-base-table field that accepts the text values of day names. On that field, create a when-validate-item trigger that translates the text into a real date, which it then uses to set the value of the actual base-table item.

  • HT1199 My mac has OSX version 10.8.2 and I'm try to install an aiport express base station which requires 10.5.7 or later. Yet when I try to install the software it says the base station is not compatible with my mac version - how do I resolve?

    My mac has OSX version 10.8.2 and I'm try to install an aiport express base station which requires 10.5.7 or later. Yet when I try to install the software it says the base station is not compatible with my mac version - how do I resolve?

    You already have the software installed that you need if you have 10.8.2.
    If AirPort Utility cannot find the Express, that is another matter. More software is not needed. More troublehooting is needed.
    Power up the Express for a full minute
    Hold in the reset button on the Express for 7-8 seconds and release
    Allow a full minute for the Express to restart
    Click the AirPort icon at the top of the Mac's screen
    Look for a heading of New AirPort Base Station
    Just below that, click on AirPort Express
    What happens?

  • How to make a form for input in web interface builder

    Hi expert:
        How to make a form for input in web interface builder?I have already used it to do PS planning, but I don't know how to  draw lines and checkboxes . Thanks in advance.
    Allen

    WAD:
    Open the WAD and create a new template. On the left hand navigation you will have several Web Items available. Under 'Standard' you have 'Analysis' item. Pull that into your template to the right. Under the Properties tab you need to pick the query [form/layout] that you have built in Query Designer.
    You will also find other items such as Button group, Checkbox, drop down, list box etc available. Pick and drag into the template whatever it is you require. Lets say you want a button. Under the Properties tab select the 'Command' that you require. You could use standard commands that are available there. You could also define functions and commands that you require.
    Query Designer:
    Open the QD and drag the characteristics and key figures that you require into the rows and columns of the QD. You would need to specify restrictions under the Filter tab of the QD based on the granularity of data that you require. You would need to remember that the key figures need to be made Input Ready [do this by clicking on KF and on the planning tab select "change by user and planning functions"].
    This shouldgive you a start. After you've explored it yourself a bit we can discuss further and I can certainly provide you additional details/material on these areas.
    Srikant

  • How can I get my Microsoft Outlook for MAC to work with ATT/Yahoo's email system?  ATT/Yahoo is telling me they're not compatible with the MAC version...

    I have tried to make my Microsoft Office for MAC's OUTLOOK program work as the default email system.  But ATT/Yahoo says its service is not compatible with the MAC version of Microsoft Outlook...  Has anyone been able to make it work?  I can't change my ISP right now.

    You might try asking your OutLook for Mac question in the Office for Mac forums. http://answers.microsoft.com/en-us/mac?auth=1

  • How to make uiactionsheet and uidatepickerview compatible both ios 7 and ios 8 ?

    how to make uiactionsheet and uidatepickerview compatible both ios 7 and ios 8 ?

    I do not know actually why there is no option "dock transparency". That is strange that Apple is proudly speaking about Retina display and now covers it by such big and untransparent stripe of something. I also like the display and I am strongly dissapointed seening it painted in such blurred colors. And I do not care about algorithms that are behind it and how complicated there are. It is not working for me and happy to see for most of the community. That definitively is not a dock. I would like to make it full transparent this would be more iOS7 light style. At the dock there are icons which stay all the time at the same place, why do we need something to emphasize their meaning?

  • Is Forms 10g compatible with Oracle database 8.1.7.4.0 ?

    Hello Folks,
    Is Forms 10g compatible with Oracle database 8.1.7.4.0 ?
    Thank You
    Anna

    There shouldn't be problems. [url https://metalink.oracle.com/metalink/plsql/f?p=130:14:3453894956402291720::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,207303.1,1,1,1,helvetica]Metalink Note:207303.1

  • How to make an hypertext link workable with adobe reader for IOS ?

    Hello,
    Hypertext links in a PDF file work perfectly well on Mac OS (Yosemite).
    The same document on an IPAD with IOS is not able to open an hypertext link ...
    How could I do to solve this problem ?
    An author who want to publish electronic books with hypertext links on mobile devices

    Hello Steve,
    All my best wishes for the new year.
    To answer your question :
    . I am writing books on my IMAC with Yosemite  (10.10.1) using Word (14.4.7)
    of  OFFICE MAC.
    . I can open Hyperlink connection by clicking on the link
            . I save the document in a .PDF format
    . This document is sent to my IPAD with IOS 8.1.2
    . In this .PDF document I am no more able to open hyperlink connection
    Please see attached an abstract of my book.
    Thanks a lot for your help and advices.
    Michel Poncet
    Tel: +33 4 76 89 50 82
    http://www.amazon.fr/Glariand-Copent/e/B007NXP7FU
    De :  Steve Werner <[email protected]>
    Répondre à : 
    <[email protected]>
    Date :  vendredi 2 janvier 2015 03:34
    À :  Michel Poncet <[email protected]>
    Objet :   How to make an hypertext link workable with
    adobe reader for IOS ?
    How to make an hypertext link workable with adobe reader for IOS ?
    created by Steve Werner <https://forums.adobe.com/people/Steve+Werner>  in
    Adobe Reader for iOS - View the full discussion
    <https://forums.adobe.com/message/7058559#7058559>
    Hyperlinks can be of several types. What are you linking to? Exactly what
    application did you test the hyperlinks with on the Mac? What application
    did you use to create the hyperlinks?
    If the reply above answers your question, please take a moment to mark this
    answer as correct by visiting:
    https://forums.adobe.com/message/7058559#7058559 and clicking ŒCorrect¹
    below the answer Replies to this message go to everyone subscribed to this
    thread, not directly to the person who posted the message. To post a reply,
    either reply to this email or visit the message page:
    Please note that the Adobe
    Forums do not accept email attachments. If you want to embed an image in
    your message please visit the thread in the forum and click the camera icon:
    https://forums.adobe.com/message/7058559#7058559 To unsubscribe from this
    thread, please visit the message page at
    , click "Following" at the
    top right, & "Stop Following" Start a new discussion in Adobe Reader for iOS
    by email
    <mailto:[email protected]eso
    ftware.com>  or at Adobe Community
    <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=
    14&container=4631>  For more information about maintaining your forum email
    notifications please go to https://forums.adobe.com/thread/1516624.

  • Hi all, how to make slide show on Iweb with out QuickTime?

    Hi all, how to make slide show on Iweb (with out QuickTime or link to YouTube) to be watched in any computer/system?
    I used Imove - share - exported - medium (m4v)
    This the one I did.
    http://360motorcycleadventures.com
    Must looking profissional (no YouTube frame)
    The problem is: I lot people don't have QuickTime, any body can point me the right direction?
    Thanks' in Advance.

    I use this slideshow often :
    http://www.wyodor.net/iWebBlogTest/Wyodor_1/WebBanner.html
    See it here in an iWeb page :
    http://www.wyodor.net/_Demo/MyHouse/Huis.html
    These are the slideshows :
    http://www.wyodor.net/_Demo/Gardens/flagstones.html
    http://www.wyodor.net/_Demo/Gardens/gardens.html
    And here in a non-iWeb page :
    http://www.wyodor.net/htmlegg/SmallCard/SmallSlideshow.html
    This is the slideshow itself :
    http://www.wyodor.net/htmlegg/SmallCard/VintageParis/
    Or use WOW slider :
    http://www.wyodor.net/htmlegg/TallCard/TallWow.html
    There are lots of slideshows out there. Choose the one you like.
    And search/browse this forum for other solutions.

  • Is Adobe Form Central compatible with WIX?

    Is Adobe Form Central compatible with WIX.com?

    Hi kbeam-bci,
    While I'm not very familiar with WIX.com, Adobe FormsCentral does have an Embed Form option, which allows you to embed your form on a website. There are also several Embed options, such as including (or not) the page background colors and header, among others.
    Please let me know if this answers your question.
    Best,
    Sara

  • How to make pdf file auto open with adobe reader after downloaded

    how to make pdf file auto open with adobe reader after downloaded

    I note from your system details that you have the plugin for adobe pdf s so I would have expected the files should open in firefox '''without''' you needing to explicitly download them.
    Once the files are open in firefox, you will also get the option to save them permanently to a location on your computer. If you wish I suppose you could set the file type pdf to be associated with and be opened by firefox instead of with the Adobe Acrobat Reader, but that would just seem to be an additional complexity.

Maybe you are looking for