How to make photoshop work like mspaint

I know how dumb this sounds, but I could really use some help.
I was trying to use CS3 to resize an image (a page of a book), but  photoshop would open it in bitmap only. After realizing how much the  image quality would drop when resizing in bitmap, I tried to make  photoshop open the picture in a different mode like RGB, but I couldn't  figure out how. (The only mode I could change to was Grayscale, but it  was as bad as bitmap)
This has forced me to resize the picture in mspaint...
Below is one of the pictures I was trying to shrink; its current size is  about 2500x3200 (38k). I hope someone could tell me how to resize these  kind of pictures in photoshop (I'd settle for mspaint if resizing were  the only thing I needed to do)
http://i37.tinypic.com/29xsmk3.jpg
Thanks for any help.

Thanks for testing the image for me. I just realized the image in my 1st post had been altered by tinypic in the upload process. I'll make sure to upload the original image this time:
http://a.imageshack.us/img687/7564/book1page001.png
I have many more of these images, all of which with the same problem.

Similar Messages

  • How to make photoshop work concurrently with Lightroom?

    Usually I start adjusting in lightroom and then do hard edits in photoshop.  When I work with Tiff files in Lightroom its great because I dont have to save my changes as I work on a batch of photos.  When I open one of my tiffs from lightroom into photoshop is there a way for the edits that i make in photoshop to be applied to that file in lightroom without saving the file again in photoshop? 

    josh phoenix wrote:
    is there a way for the edits that i make in photoshop to be applied to that file in lightroom without saving the file again in photoshop? 
    No

  • Every time I send a file to the TRASH, finder ask me to type my system password to complete the removal and wasn't like this before. How do I make to work like it was before? Thanks.

    Every time I send a file to the TRASH, finder ask me to type my system password to complete the removal and wasn't like this before. How do I make to work like it was before? Thanks.

    http://www.thexlab.com/faqs/trash.html

  • How to make rss work

    So, I'd like to get RSS working on my iMac. When I click on an RSS logo/button, I get the message "No associated application could be found." HUH??? Any idea on how to make RSS work??? In either Safari or Mail.

    RSS has been removed from Mail and Safari in Mountain Lion, so you will need to use a thrd party application such as Vienna.

  • How to make MDM work?

    Hi Guy,
    I'm newbie for MDM.I already intalled it on my machine(Window Xp)but dunno how to make it work.
    The installed components are MDM/Syndicator/Import server,Console/Import mgr/Data mgr/Syndicator.
    Do I have to install any component else?And Can you guy give me any guides/documents/Posts how to make it work.Cause I have to demo it next week but right now still blank about it...
    Thanks
    Parinya.

    Hi Jack,
    For Demo Purpose,
    1.Create few master records in R/3 Servers [ MM(Tcode MM01) /Employee(PA40) /Vendor(Xk01) /Customer(XD01) according to your MDM Repository(For Example "Products").]
    2.Extract those master datas from R/3 Servers.
    3. You will get the xml file of master datas.
    4.Open the import manager and import the xml file into  the MDM server.
    5.In Import manager ,you need to map the records[Source Fields(Imported records) VS Destination Fields(MDM repository)].
    6.Once you imported the record ,u can see the records in the MDM Data manager.
       We can Create/edit/Delete those records .
       We can merge the records for consolidation purpose.
       We can perform Data enrichments process   like Validation,Workflow,Assignments..etc.
    7.Once cleaned the Master records,it is ready to distribute to R/3 servers.
    8.Syndicator is used for sending data back to the R/3 servers
       Here also we have to do Mapping against R/3 servers.
       Using XI We can connect the R/3 Servers.
    Hope u will understand this.
    This is very simple example for MDC-MDH Scenario.
    For futher learning on how to create a repository/Enrich the mater datas, go through reference documents in the Service Market place.
    Best Regards
    Devaraj PK

  • How to make this work with Firefox, HELP!

    Downloading for Real-player, after watching the full movie, I click download and it has to reread the movie from the internet. When using explorer, after downloading the movie, it reads it from memory, which makes it a fast download. How to make this work with Firefox, I like not to use Microsoft products, and I really like Firefox 7.0.1!!!! HELP!

    -> click '''Firefox''' button and click '''Options''' (OR File Menu -> Options)
    * Advanced panel -> Network tab
    * place Checkmark on '''Override Automatic Cache Management''' -> under '''Limit Cache''' specify a large size of space
    * Remove Checkmark from '''Tell me when websites asks to store data for offline use'''
    * click OK on Options window
    * Restart Firefox
    Check and tell if ts working.

  • SPA3000 FXO to SPA2000 FXS, how to make it work?

    I'd like to create an environment so I can test the dial plan of SPA3000. But when I dial throughgw0 of SPA3000 while connecting FXO to FXS of SPA2000, from SPA2000 configuration I always get Call 1 State Invalid and Call 1 Tone Reorder. It seems that SPA2000 couldn't recognize the DTMF tone sent by SPA3000. Don't know how to make it work. Please advise. Thanks in advance.

    I have a SPA3102 attached thru the FXO port to the FXS port of a SPA1001.  I don't think there is anything special in the configuration.
    On the PSTN Line Tab I have:
    Preferred Codec: G711u
    Use Pref Codec Only: no
    DTMF Tx Method: AVT
    VoIP-To-PSTN Gateway Enable: Yes
    VoIP Caller Auth Method: none
    Line 1 VoIP Caller DP: none
    PSTN Dialing Delay: 1
    VoIP Answer Delay: 0
    If you are having trouble, for troubleshooting I would run the sip debug trace on the SPA3000.  If the failure is in your line 1 dial plan you won't see anything in the trace.  If the dial plan sends the call to gw0 then you will see the sip invite for the internal call inside the adapter and you should see the FXO port go off hook.  If that looks OK you can run a trace on your SPA2000 to see the result there.  The SPA3000 Info tab will also give you troubleshooting information.  You should see the on-hook and off-hook voltage level of the SPA2000.  You may also see information about the last pstn number dialed.
    On the SPA2000, you would need to have it registered with a voip provider, or else have it set to Make Call Without Reg before it will accept an incoming call from the FXS port.
    Message Edited by hw on 02-02-2009 06:02 PM

  • How to make a leader like 'De wereld draait door'?

    How to make a leader like this one: De Wereld Draait Door - Intro (nieuw) - YouTube
    If you have any tips, please tell me .

    That's not a plug-in or effect, it's a bunch of 3D layers shaped like a semicircle with the anchor point on the straight edge rotating. You could use some expressions to make things easier. Once you get the basic globe made of cards working the best option for the rest of the animation would be to move the camera or parent the whole globe made of cards to a 3D null and animate the null's position. You may end up with a null parented to a null parented to all of the semicircles.
    It's not a newbie project. It going to take some 3D skills in AE.
    You could also do this in a 3D app. The concept is the same. Semi Circle flat cards rotating about the straight edge.

  • How to make a layout like this?

    Hu My question is how to make a work layout like this panel?
    One is affected by perspective grid and there others are not.
    Thank you!

    Please read about art boards in the manual. That's what it's there for.
    In one file you can have objects in the perspective grid and objects that are not. Use the plane switching widget to determine that:
    http://help.adobe.com/en_US/illustrator/cs/using/WSfd7453be0f56bba4-4bd07ab712480a35d44-80 00.html

  • How to make an avatar like this,

    Hello Adobe Community, i'm new here, i have a big question. I want to know HOW to make an avatar like this:
    I want to know how to do that effect that who zoom in and zoom out etc. WITHOUT SNOWING, only that effect, if you can help me please!
    That zoom effect is AWESOME... send me a tutorial please!

    I thought you said you knew how to make animated gif.  A frame is the composite of the layers that have their visibility on for the frame a frame may be made using many layers. You use tools and filters on layers.You make frame using layers.
    Photoshop also supports any size layer. Layers can be  larger the canvas size can have image data out side the canvas.  Layer image data position above can be move relative to the canvas.  The Cloud logo animation has two layer one is masked is masked the mask is not linked to the layers image data it stationary over the canvas and is more on less a masks more foe the background canvas then the layer its on. The layer it is on image data is more off canvas then over canvas. Photoshop also notes layer position in a frame information, A layer potion can be change from frame to frame. I only create two frame for that animation.  The first and last frame, The first frame I had the top late image JJMACK high and off canvas to the left.  The last frame had it low and off canvas to the right. I then had Photoshop generate 138 frames between the two frames I created.  So Photoshop moved the top layer position across the canvas  left to right and high to low direction and the stationary layer mask masked it as if it were going through the background layers clouds.  The two layers are visible in all frames.

  • RdbmsRealm - how to make it work

    I was running the example server. I would like to see if I can delegate the security to an rdbmsRealm. I followed the instruction from the documentation. I created the three tables for security in Oracle 8i Lite in my NT machine. I then startup the example server and created a security realm for my oracle 8i tables. I then selected the cacing realm and selected my oralce 8i Lite realm. However, this does not change the security because the new users that I created are still updated in the filerealm.properties file.
    My understanding is that we should be able to use the oracle realm I just created for the wls realm. As for the caching realm, I thought it's there for performance reasons.
    Could somebody tell me how to make it work? Thanks.

    Hi Susan:
    I followed you instruction and modified the config.xml file to use the rdbmsRealm in that I set up in Oracle 8i Lite. I am using the Oracle 8i Lite driver to talk to the database. I then tried to create new users. From the console, it appears that the users are added successfully. However, the new users do not exit in the oracle 8i lite rdbmsRealm. They do not exist in the filerealm.properties file neither.
    I then tried to use the cloudscape rdbmsRealm. This is achived by the following configuration in the config.xml file:
    <CachingRealm BasicRealm="defaultRDBMSRealmForCloudscape" Name="defaultCachingRealm"/>
    However, the realm initialization failed. Then I checked the definition for the cloudscape rdbmsRealm in the config file and found out that the schemaproperties entried are all chopped off. This is because of the bug you told me earlier.
    I would like to get the cloudscape rdbmsRealm working first and then try to find out why the oracle 8i Lite rdbmsRealm did not work. Could you please send me the schemaproperties entries needed for the cloudscape rdbmsRealm? Thanks.
    Helen
    "Suresh Vallabhaneni" <[email protected]> wrote:
    >
    Hi Helen
    Here is a sample of what you need in the config.xml. Modify to match your environment.
    <Security
    Realm="defaultRealm"
    />
    <Realm
    Name="defaultRealm"
    FileRealm="defaultFileRealm"
    CachingRealm="defaultCachingRealm"
    />
    <CachingRealm
    Name="defaultCachingRealm"
    BasicRealm="defaultRDBMSRealmForOracle"
    />
    SUBSTITUTE THE REQUIRED VALUES FOR THE RDBMS REALM
    <RDBMSRealm
    Name="defaultRDBMSRealmForOracle"
    RealmClassName="examples.security.rdbmsrealm.RDBMSRealm"
    DatabaseDriver="weblogic.jdbc.oci.Driver"
    DatabaseURL="jdbc:weblogic:oracle:yourdatabase"
    DatabaseUserName=""
    DatabasePassword=""
    SchemaProperties=""
    />
    Let me know if you still have a problem.
    thanks
    "Helen Semus" <[email protected]> wrote:
    Hi Suresh:
    Yes, I was selecting the default cacherealm from the console.
    I checked my config.xml for the exampe server. You are right. The schemaProperties attribute values are truncated. I guess I will have to manually modify my config.xml file to get it to work.
    Besides making sure the attributes for the rdbmsRealm element correct, is there anyother element or attribute that I need to set to enable the rdbmsRealm?
    Thanks.
    Helen
    "Suresh Vallabhaneni" <[email protected]> wrote:
    Hi Helen
    Are you trying to select the caching realm through console? There is a release note on this(http://www.weblogic.com/docs60/notes/issues.html#1029973) that selecting the caching realm through console will corrupt the config file. If you're doing otherwise, plz let me know.
    thanks
    "Helen Semus" <[email protected]> wrote:
    I was running the example server. I would like to see if I can delegate the security to an rdbmsRealm. I followed the instruction from the documentation. I created the three tables for security in Oracle 8i Lite in my NT machine. I then startup the example server and created a security realm for my oracle 8i tables. I then selected the cacing realm and selected my oralce 8i Lite realm. However, this does not change the security because the new users that I created are still updated in the filerealm.properties
    file.
    My
    understanding
    is
    that we should be able to use the oracle realm I just created for the wls realm. As for the caching realm, I thought it's there for performance reasons.
    Could somebody tell me how to make it work? Thanks.

  • How to make HD look like 4K

    I found this article rather interesting. If I had to try and make a silk purse out of a sow's ear, I would read this one again.
    RedShark News - How to make HD look like 4K

    I'd forgotten about RedShark in general ... thanks for the heads-up.
    And the point about the "impression" being at times more important than the reality (especially if not well handled) is well taken. Working professional stills for many years now ... I've had large prints that even at close inspection looked much cleaner, sharper, and less noisy than other photog's made who had "larger" sensors ... but did their post not as righteously as I did. How you set up & shoot the image/s in the first place matters ... as does how you handle your post & output.
    Craft matters ...  

  • Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

    Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

    If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
    Not necessarily.  That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
    If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio.  You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise.

  • TS2634 I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

    I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

    I have the same problem.
    Two similar discussions:
    https://discussions.apple.com/message/23081658#23081658
    https://discussions.apple.com/message/23281391#23281391
    I have not yet seen any official response to the question: "Is the Apple AV Composite cable fully supported with 30pin connector devices upgraded with iOS7 - specifically ? - eg. iPad 2, iPhone 4, iPhone 4s"
    If it is not currently supported is that then due to a bug / oversight and in that case is it something that will be fixed in the near future?
    Please let us know what feedback you got from asking Apple support.

  • How to make buttons work in Interactive Adobe Forms

    Hi Experts,
    I am new to interactive form. Though i have worked in normal/non-Interactive form, i do not know how to make buttons work in interactive adobe forms using ABAP  (I don't know JAVA). Can any one help me out and walk me through to how to code in ABAP to make buttons work.
    Kind Regards,
    Sharat.

    Please refer to my earlier post ... You will get an idea
    Please refer to the below thread for detail solution
    Sample Interactive form example ?....urgent...
    Cheers
    Satya

Maybe you are looking for

  • Link between assets in different versions. (One update changes an asset in all 3 places)

    I understand the hurdles it will take to give Adobe Muse the ability to create responsive sites, though I have very little knowledge of what it takes to make a change like this I wonder if there is a way to soften the blow of there being no true resp

  • Problem junk app in phone

    how to know which app on phone can be disable??

  • OOPS A TECHNICAL ERROR OCCURRED

    Why must it be so very difficult with all those installations of softwares? Some clever technicians should look at this. Ok it is certainly so that we customers are doing something wrong. But let us know that when we do an installation. And tell us e

  • Adobe Reader X (free) -- "Do you want to save changes" prompt

    Why is this prompt always coming up when I close a PDF document? "Do you want to Save Changes to  X   Before closing?" I am using the free Adobe Reader X 10.1.1.  I can't make any changes to the file since it's the free version, so why is it asking m

  • IWeb Publish to FTP: Double Site Name

    My attempt to mount an iWeb site publishing via FTP to my commercial host server on my acquired domain name josephscriven.org works well EXCEPT when it is up on the Internet a redundant duplication creeps into the URL. After clicking on or entering j