How to make reports based on Data block work on web?
I am using form 6i and oracle 9ias
I have successfully call the common reports from the form on the web using run_report_object, then web.show_documnet(..);
But when it come to the reports based on the data block from the form, it doesn't work. it always fetch all the records from the table which the data block is based
Anyone can tell me how to make that work?
thanks
I have successfully do this when I am running forms and >reports in localhostTell me how did you achieve this?
Did you have both Reports and Forms running under same oracle home?
and off course was it a clinet server architecture?
What version for Form and Reports did you use?
Which executables did you use and what was your call from forms? When you call from Forms, which Reports executable use to run the report?
The data integration can only be achive if both the product were running under same Oracle home and were in client server architecture. I do not think data integration is possible in web architecture.
Thanks
Rohit (Orcale Reports Team)
Similar Messages
-
Process Chain - How to make decision based on data in PSA and execute DTP
Need to create process in Process Chain, which will execute the DTP based on data in PSA.
Say we have two DSO A & B, both getting data from same datasource.
In process chain, we need to read data in one of the date field in PSA and make a decision, which DTP to get execute in process chain.
Say if date field contains year = 2000, than load to DSO A, if year is 2001, load data to DSO B.
Suggest the solution. ...Hi,
Tyr this steps.
1) Develop ABAP process types
ABAP report to read PSA data using function module
Trigger events based on year
event1 -> for even year data
event2 -> for add year data
2) Develop local process chains for each DTPs and schdule it with events mentioned above.
Do reply with comments. -
How to schedule the webi report based on data changes in the report data
Hello,
I want to schedule a webi report based on data change in a column in the report.
The scenario is something like below:
1. If a data of a particular column changes from 2 to 3 than I would like to schedule this report and sent it to users mail box.
I know how to apply alerts or schedule a report or data tracking for capturing changes in the report but I dont know how to schedule the report only for data changes.
Anybody done this before.
Thanks
GauravHi,
May be these links can help you:
http://devnet.magicsoftware.com/en/library?book=en/iBOLT/&page=SAP_R_3_Master_Data_Distribution_Defining_Change_Pointers.htm
SEM-BCS: Load from data stream schedule
Attribute Change Run -
How to make linkage query In Data Model for search
I want to make an linkage query as a condition for my report in BI Publisher. how to make the linkage in Date Model ?
This is the forum for SQL Developer, not for general SQL or PL/SQL questions.
Please repost this in the SQL and PL/SQL forum. -
How to make use of adjacent data elements within the same buffer
Hi,
Does anyone know how to make use of adjacent data elements within the same buffer? To make my question clearly, I would like to give you an example. In my application, I set "sample to read" as 10 which means at each loop 10 data samples will be taken into a buffer. Now, what I would like to do is to do some calculations on adjacent data samples in same buffer. I tried to use "shift register" for this, but it seemed to me that it only can deal with the calculation between data from adjacent loops. In other words, it skips 9 data elements and take the 10th one for the calculation.
Here I also attach my VI showing what I did.
Thank you very much in advance,
Suksun
Attachments:
wheel_encoder_1.vi 98 KBHi Suksun,
I hope you'll forgive me for distilling your code - mainly to understand it better. I tried to duplicate your logic exactly - which required reversing the "derivatives"-array before concatination with the current samples array. As in your code, the last velocity is being paired with the first position. If first velocity is really supposed to be paired with first position, just remove the "Reverse 1D Array" node.
cheers
Message Edited by Dynamik on 01-07-2006 03:17 AM
Message Edited by Dynamik on 01-07-2006 03:19 AM
When they give imbeciles handicap-parking, I won't have so far to walk!
Attachments:
encoder2.GIF 14 KB
encoder2.vi 102 KB -
How to make report with access 2010 from SharePoint Discussion lists 2013
HI,
I want to make an access report from SharePoint Discussion lists 2013. When i open the list with access, the body of the list is in HTML format in access. Also if i reply something to one subject in the discussion, the reply is not mapped to that subject
but instead it is shown as a separate entry in the database.
Anyone can please help?
SAN
Santhiya
SanthiyaHi Santhiya,
I have seen a similar post from you, my understanding is that you wonder that the reply is mapped to the related subject. You can take a look at Daniel's reply in the following thread:
http://social.technet.microsoft.com/Forums/en-US/dfb5bcb9-0076-412a-b34f-46aa9cfba876/how-to-make-report-with-access-2010-from-sharepoint-discussion-lists-2013?forum=sharepointgeneral
Thanks,
Wendy
Wendy Li
TechNet Community Support -
How to make the exchange of data between 2 while loop in real time
hello
I have 2 while loop
the 1st while loop includes the data acquisition program
the 2nd while loop includes the control program
my question is how to make the exchange of data between 2 while loop in real time
I tried with the local variable and direct wiring between the 2 while loop
it does not work (there is a delay)
Solved!
Go to Solution.Bilalus,
Queues are only good to transfer data if your application isn't deterministic. Since you are using Real Time, I am assuming that your application requires determinism. If you are using Timed Loops and you use queues to transfer data between your loops, you are losing determinism. In this case, you need to use the RT FIFO functions.
Warm Regards,
William Fernandez
Applications Engineering
National Instruments -
How to make reports on FI Line items
Hi all,
Let me know how to make reports on FI Line items especially drill down reports. suggest me steps for developing reports through Bex query designer. Am new in reporting on FI. How to make the drilldown reports. Plz let me know step by step.
Thanks,
JackHi
Follw the steps
Step1
Lets take an example of ODS Accounts Payable: Line Items Technical Name: 0FIAP_O03
install all this 0FIAP_O03 ODS from the Business content.
For more details on FI Line item ODS
http://help.sap.com/saphelp_nw04/helpdata/EN/af/16533bbb15b762e10000000a114084/frameset.htm
Step2
After installing make sure that all the infoobjects and transfer rules and update rules are in active state
Step3
Now type the transaction code RRMX , you will get into the query designer
Step4
Select the Infoprovider from the above example 0FIAP_O03 . now you will arrive to the screen where you can see Rows and colums
Step5
Drag and drop the characteristic infoobject in to the row which is necesseayfor the report output
Step6
Drag and drop the Keyfigure infoobject into the column which is necesseayfor the report output
Step7
Now under Free characteristics draga and drop the charactor infoobject which you need to navigate in the reporting.
Note: Before dragging the objects in the freecharacteristic make sure that you need to check the navigation in the ODS level
Step8
Now save the report , when you save give the technical name of the report and save
now execute the report
Santosh
Edited by: Santhosh Nagaraj on Nov 15, 2009 1:35 AM -
How to Save Multiple Records In Data Block
Hi All,
I Have Two Blocks --> Control Block,Database Block
Please Any Idea How to Save Multiple Records In Data Block when User changed Data in Control Block.
Thanks For Your Help
SaNow i have to use each record of control block(ctl_blk) as where condition in data base block(dat_blk)and display 10 records from database table.>
Do you want this coordination to be automatic/synchronized or only when the user clicks a button or something else to signal the coordination? Your answer here will dicate which trigger to put your code in.
As to the coordination part, as the user selects a record in the Control Block (CB), you will need to take the Key information and modify the Data Block's (DB) "DEFAULT_WHER E" block property. The logical place to put this code is the CB When-New-Record-Instance (WNRI) trigger. You code will look something like the following:
/* Sample WNRI trigger */
/* This sample assumes you do not have a default value in the BLOCK WHER E property */
DECLARE
v_tmp_dw VARCHAR2(250);
BEGIN
v_tmp_dw := ' DB_Key_Column1 = '||:CONTROL.Key_Column1||' AND DB_Key_Column2 = '||:CONTROL.Key_Column_2;
Set_Block_Property('DATA_BLOCK', DEFAULT_WHER E, v_tmp_df);
/* If you want auto coordination to occur, do the following */
Go_Block('DATA_BLOCK');
Execute_Query;
/* Now, return to the Control Block */
Go_Block('CONTROL_BLOCK');
END;
The Control block items are assigned with values in Form level (Key_exeqry).If your CD is populated from a single table, it would be better to create a Master - Detail relationship (as Abdetu) describes.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly. -
How to make form based authenticaiton in adf security?
Hi all
How to make form based authenticaiton in adf security?
help give example video or project.
Thanks lhagvaHave you read the docs (http://download.oracle.com/docs/cd/E17904_01/web.1111/b31974/adding_security.htm)?
Timo -
How to make report high 3.33 inch per page(11g report)
Dear all,
How to make report high 3.33 inch per page
so if there are more than one page in the report it will start printing in the correct position on the next page,
i make generate to PDF then print
Thanks,
SakrHello Sakr,
This is a good question:
You can visualize:
http://1.bp.blogspot.com/_KYY-OV98iIo/S4-7ISbC5NI/AAAAAAAAAGw/bmelGzNg6UI/s1600-h/MainSection.bmp
You can change Height that shows 11 in the visual aid.
Mark Correct or Helpful !
Edited by: New Yorker on Aug 26, 2011 11:40 AM -
Base data block on a web service
Hy,
I need to integrate an oracle forms application with data provided from other applications (via web services), like countries, cities, users ecc.
there is a way to base a data block (in forms web 6/10 with Java Importer) on a data returned from a web service?
Can i base block on a PL/SQL variable, returned from java, that contains data from web service?
Thanks at all.
Davidehere is a snippet:
PROCEDURE BT_Poll IS
|| Name : BT_Poll
||
|| Aufgabe : Hier werden Bücher bestellt
||
|| Autor : 05.03.2006, VOL
|| Updates :
R_App SPU_Type.T_App := Init_App ('BT_Poll');
v_list ORA_JAVA.JARRAY;
R_String Const_lokal.T_CSV_Datensatz;
E_kein_Webservice EXCEPTION;
PRAGMA EXCEPTION_INIT (E_kein_Webservice, -105100);
v_Akt_Record NUMBER;
BEGIN
Go_block ('Workitems');
v_Akt_Record := Akt.Record;
Clear_Block;
-- user, pw, server
v_list := BpelWorkflowClient.getAllWorkItems (
a0 => Const_lokal.usr_Buchbesteller,
a1 => Const_lokal.pwd_Buchbesteller,
a2 => Const_lokal.srv_Default);
-- v_list_laenge := ORA_JAVA.get_array_length (v_list);
:PARAMETER.PA_ANZ_POLLS := ORA_JAVA.get_array_length (v_list);
FOR i in 0 .. :PARAMETER.PA_ANZ_POLLS - 1
LOOP
:WORKITEMS.ALL := ORA_JAVA.get_String_array_element (v_list, i);
Get_CSV_Daten (:WORKITEMS.ALL, ';', R_String);
:WORKITEMS.Task_Titel := R_String.Wert_01;
:WORKITEMS.Task_ID := R_String.Wert_02;
:WORKITEMS.ISBN := R_String.Wert_03;
:WORKITEMS.Buch_Titel := R_String.Wert_04;
:WORKITEMS.Autoren := R_String.Wert_05;
:WORKITEMS.Preis := R_String.Wert_06;
:WORKITEMS.Bestellername := R_String.Wert_07;
create_record;
END LOOP;
Go_Record (v_Akt_Record);
IF :PARAMETER.PA_ANZ_POLLS = 0 THEN
go_block ('BUECHER');
END IF;
EXCEPTION
WHEN E_kein_Webservice THEN
WHEN OTHERS THEN
END;
FUNCTION getAllWorkItems(
a0 VARCHAR2,
a1 VARCHAR2,
a2 VARCHAR2) RETURN ORA_JAVA.JARRAY IS
BEGIN
args := JNI.CREATE_ARG_LIST(3);
JNI.ADD_STRING_ARG(args, a0);
JNI.ADD_STRING_ARG(args, a1);
JNI.ADD_STRING_ARG(args, a2);
RETURN JNI.CALL_OBJECT_METHOD(TRUE, NULL, 'de/opitzconsulting/bpel/wf/client/BpelWorkflowClient', 'getAllWorkItems', '(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)[Ljava/lang/String;', args);
END;
[/pre]
the getAllWorkItems is a generated Package which wraps the workflow-webservice-method
try it
Gerd -
How to engage the "today´s date" in works?
how to engage the "today´s date" in works?
I don't understand this question. assuming you are interested in getting todays date in a cell of a table you can enter the formula:
=today() -
Adobe Captivate 7 Project How to make Rollover cations, audio, and video work in HTML format?
Honestly, I don't even know why this is an option. The conversion to Flash is completely unusable.
I have exported some things to Flash, and since I program in Flash all the time I was able to manipulate to work to some degree. Most text captions are built with multiple elements and completely fall apart.
Sorry, I can't be of more help. -
How to make my Execute Immediate statement to work??
Hi, Sir:
I use SQL Oracle 9i,
I have following procedure called by a trigger:
CREATE OR REPLACE PROCEDURE emps_check IS
s_sql VARCHAR2(500);
BEGIN
DBMS_OUTPUT.PUT_LINE('1. Start to Delete all rows in the emps' );
delete from emps;
DBMS_OUTPUT.PUT_LINE('2. Start to insert into emps from emp' );
s_sql:='INSERT INTO Emps(EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) select EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO from emp;';
DBMS_OUTPUT.PUT_LINE('3. s_sql= ' || s_sql );
EXECUTE IMMEDIATE s_sql;
DBMS_OUTPUT.PUT_LINE('3. Procedure call OK, Employ Name ' );
EXCEPTION
-- Use this to trap the ORA-00942: table or view does not exist
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('Procedure call Exception: Employ Name ' );
end emps_check;
My trigger is:
CREATE OR REPLACE TRIGGER emps_biu_after
after INSERT OR UPDATE or delete on emp
for each row
begin
if TO_CHAR(SYSDate,'DY')= 'SUN'
then
DBMS_OUTPUT.PUT_LINE('Today is holiday, ename =' );
else
DBMS_OUTPUT.PUT_LINE('Today is working Day, ename =');
emps_check();
end if;
end;
When I use following to update emp table:
SQL> UPDATE emp T1
2 SET T1.sal = 200.0
3 WHERE T1.ename like '%SCOTT%';
I got:
Today is working Day, Trigger Call Procedure emps_check()
1. Start to Delete all rows in the emps
2. Start to insert into emps from emp
3. s_sql= INSERT INTO Emps(EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) select EMPNO,ENAME,JOB,MGR
Procedure call Exception: Employ Name
Trigger Call Procedure emps_check() Success
Looks like EXECUTE IMMEDIATE s_sql; did not work.
What is wrong??
How to make my Execute Immediate statement to work??
ThanksYou may omit the ';' character...
s_sql:='INSERT INTO
Emps(EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO)
select EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO
from emp';
... and something else
IN PL/SQL when a procedure , function doews not take
any parameter(s) then its call can be made as simply
its name without a pair of parenthesis....(It seems
that you are influenced by Java...:) )
SimThanks Sir:
I remove this ; but still error:
1 UPDATE emp T1
2 SET T1.sal = 768.1
3* wHERE T1.ename like '%SCOTT%'
SQL> /
Today is working Day, Trigger Call Procedure emps_check()
1. Start to Delete all rows in the emps
2. Start to insert into emps from emp
3. s_sql= INSERT INTO Emps(EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) select EMPNO,ENAME,JOB,MGR,
Procedure call Exception: Employ Name
Trigger Call Procedure emps_check() Success
My code as follows:
CREATE OR REPLACE PROCEDURE emps_check IS
s_sql VARCHAR2(500);
BEGIN
DBMS_OUTPUT.PUT_LINE('1. Start to Delete all rows in the emps' );
delete from emps;
DBMS_OUTPUT.PUT_LINE('2. Start to insert into emps from emp' );
s_sql:='INSERT INTO Emps(EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) select EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO from emp';
DBMS_OUTPUT.PUT_LINE('3. s_sql= ' || s_sql );
EXECUTE IMMEDIATE s_sql;
DBMS_OUTPUT.PUT_LINE('3. Procedure call OK, Employ Name ' );
EXCEPTION
-- Use this to trap the ORA-00942: table or view does not exist
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('Procedure call Exception: Employ Name ' );
end emps_check;
what is other wrong??
Yes, I am java guys,
Thanks
Maybe you are looking for
-
MBP wakes up immediately after sleep
So my MBP has been waking up from sleep right after I put it into sleep mode for some reason. According to the console it's Wake reason: XHC1. After it wakes up to the login screen it then goes to sleep normally if I leave it, but choose apple menu -
-
How do i create a shortcut on my windows pc for accessing my icloud email
How do i create a shortcut on my laptop desktop to access an icloud email detailed instructions please , not computer literate, please don't assume I know all the terms I want to click on shortcut...enter icloud name....enter password.....read and wr
-
Deleting remembered email address in Mail
Hi I have many email addresses that Mail has remembered that I no longer need, or want. How do I remove them. They are not in my address book Thanks
-
Wireless Mighty Mouse loses Bluetooth Connection
Our new iMac arrived today and works fine except for the wireless mouse which loses the Bluetooth connection frequently, especially when the mouse is "Turned off" and then turned back on (every time?). Has Apple acknowledged this problem? It appears
-
Issue after Lion upgrade - recognising older OS iPad
I have the older OS on one family iPad and now it doesn't show Lion upgrade - Any ideas