How to make sure I applied Service Pack correctly?

Hi all,
I am using Weblogic Server 4.5.1 and I just applied service pack 8 to
it. Is there any way I can tell I installed it correctly? Thanks.
--Tony
I tried the following java command:
java weblogic.Admin t3://10.1.1.74:7001 VERSION
but it gives me an error "Exception in thread "main"
java.lang.NoClassDefFoundError: javax/naming/NamingException" Please help
me out, thanks!

It looks like you have \weblogic\classes in your classpath, add
\weblogic\lib\weblogicaux.jar to your classpath before running
weblogic.Admin
Jim
"Tony Chan" <[email protected]> wrote in message
news:3a0b2c93$[email protected]..
Hi all,
I am using Weblogic Server 4.5.1 and I just applied service pack 8 to
it. Is there any way I can tell I installed it correctly? Thanks.
--Tony
I tried the following java command:
java weblogic.Admin t3://10.1.1.74:7001 VERSION
but it gives me an error "Exception in thread "main"
java.lang.NoClassDefFoundError: javax/naming/NamingException" Please help
me out, thanks!

Similar Messages

How to apply service pack in always on?

Hi Team,
in my environment we have always on. our management person asked me about the document service pack installation steps and pros and cons.
could you please guide me on this
thanks in advance
vijay

Hi vijay,
Do you want to apply Services Packs on SQL Server instances with AlwaysON Availability Group databases? If that is the case, the exact process will depend on factors such as the deployment topology of your availability groups and the commit mode of each replica.
But in the simplest scenario, the process involves the following steps:
1. Remove automatic failover on all synchronous-commit replicas.
2. Apply Services Pack on all remote server instances running asynchronous-commit secondary replicas.
3. Apply Services Pack on all local server instances that are not currently running the primary replica.
4. Manually fail over the availability group to a synchronous-commit secondary replica.
5. Apply Services Pack on the server instance that formerly hosted the primary replica.
6. Configure automatic failover partners as desired.
And some best practices should be observed before performing server updates in order to minimize downtime and data loss for your availability groups, for example, Backup all the System and user databases. For more information, please review this article:
Upgrade and Update of Availability Group Servers with Minimal Downtime and Data Loss.
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Product release Didn't Change After Applying Service Packs

I have applied Service Pack 2,3,4 Crystal XI. My product Version 11.0.0.1883 stayed the same even after applying t service packs. Would anyone have any ideas why it still shows the old release, nd thanks for helping with my issue.
Jim Dyer

Hi Jim,
Make sure you are the local PC admin and that DEP is disabled. I've seen this happen also and there were no warnings or errors, it just didn't update.
Try re-installing the patches from a local drive and be sure to turn DEP off. Search Forums for more info on how to.
Also, what OS are you installing on?
Thank you
Don

Primavera P6 v6.2.1 apply service pack 3 without dba privilege

Hi,
I have a Primavera P6 Project Management v6.2.1 database and admuser has no dba rights. It has only the privileges like connect,resource,select any dictionary,create job only. I tried to apply service pack 3 but it failed since it has no dba rights for admuser.
Admuser don't have dba rights or create any view, create any synonym privileges also.
If anyone applied service pack 3 on primavera p6 v 6.2.1 database schema by using manually running scripts. Please update me.
Regards,
Gokulnath

You need to involve your DBA in this. The only supported method of upgrading is going to be to grant admuser the appropriate role/permissions required which you will need Sytem access to do.
It doesn't make sense to try and circumvent this when it is as simple as "GRANT DBA to admuser", run the SP3 update, and "REVOKE DBA FROM admuser". Additionally you likely need to apply the SP3 client update to all users of that database (not sure exactly what SP3 entails as I have never installed it).

How to make use of Portal service in the web dynpro application

hi
I have some portal service and how to use that in the web dynpro application.
and also what is the main diff between Portal Component and web dynpro application.
do we required portal to run web dynpro application.
thanks
mmukesh

Hi,
>> I have some portal service and how to use that in the web dynpro application.
Yes. U can use Portal service in webdynpro. Check the link given by subathra.
>> and also what is the main diff between Portal Component and web dynpro application
Portal Components are components designed to run in portal server while webdynpro application can run in J2EE WebAS.
>> do we required portal to run web dynpro application.
No for general cases. Just WebAS is sufficient to run webdynpro appl. But if u use portal service in ur webdynpro appl, then make sure both (portal service and webdynpro appl) run on same J2EE engine. That is mandatory.
Regards,
Vijai

How to make use of asynchronous service in CAF development

Hello SDNs,
How can we make use of asynchronous service in CAF development;
Actually i am new to CAF development; my business requirement suites for the service provided by SAP. But the service provided is asynchronous; is it not possible to use the asynchronous service in my CAF application? if it is possible, can any one please tell me the drawbacks of using it!
You help would be highly appreciated.
Thanks,
Sireesha.B

Hi,
>> I have some portal service and how to use that in the web dynpro application.
Yes. U can use Portal service in webdynpro. Check the link given by subathra.
>> and also what is the main diff between Portal Component and web dynpro application
Portal Components are components designed to run in portal server while webdynpro application can run in J2EE WebAS.
>> do we required portal to run web dynpro application.
No for general cases. Just WebAS is sufficient to run webdynpro appl. But if u use portal service in ur webdynpro appl, then make sure both (portal service and webdynpro appl) run on same J2EE engine. That is mandatory.
Regards,
Vijai

Applying Service Pack on multiple instance SQL Server 2008 R2 Cluster and Standalone.

Friends,
Its my first time I am applying Service pack to both Standalone and Clustered SQL 2008 R2 servers. I have multiple instances running on both stand alone and Clustered environment. I don't know how to apply pack with multiple instances. Do I need to apply
the service pack each instance one by one or I can just run the pack to each node of cluster and each box of stand alone server? Will I get any multi instance selection option during the installation process so that I can select multiple instances at once??

When installing service pack for multiple instances in a standalone machine, you just run the installer and it lists all the instances eligible for the update. You could do it one by one or do it at the same time. Doing it at the same time saves time and
energy. If you selected multiple instances then you dont have to do anything else.
In case of cluster, if you have multiple instances then you need to be little careful.
Eg: Assume you have a 2 node cluster Node 1 and Node 2. Two instances Instance 1 active on Node 1 and Instance 2 active on Node 2. What I would do in this case is to first failover any one instance to the passive node. Assume I failed over Instance 2 to
Node 1. Now Node 1 is active node for both instance 1 and instance 2 and Node 2 is passive for both instances. At this point I run the service pack on Node 2. Once patching is done, I reboot the node and then failover the instaces one by one to Node
2. At this point both instances 1 and 2 would get upgraded and will be active in Node2. Now Node 1 is passive and so run the update there. Once the service pack is installed, reboot and then fail back Instance 1 back to Node 1. Note: I would also failover
Instance 2 to Node 1 just to confirm that failover works completely after service pack update.
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

HT4515 How to make sure that after browsing that the webpage is not running in the background, but totally closed down

How to make sure that after browsing that the webpage is not running in the background, but totally closed down

Double tap the Home button, tap & hold the Safari icon until it starts to wiggle, tap the red minus sign to remove it from the Multi-Tasking bar. Tap the Home button when finished.

I just upgraded to the new 4, but not sure how to make sure all my apps (purchases) get over to the new phone from iphone 3. can't seem to find instructions. thanks.

I just upgraded to the new iphone 4, but am hesitant to get it plugged in b/c I don't know how to make sure all the apps purchased on my iphone 3 get to the new phone. can't seem to find instructions so I'm sure it just "does it", but hesitant to literally pull the plug. thanks.

Follow these instructions: iPhone: Transferring information from your current iPhone to a new iPhone, http://support.apple.com/kb/ht2109

I am trying to update my iphone to the latest software version, but am getting a message saying 'make sure your network settings are correction and your connection is active'. i know my connection is active, so how can I fix this problem?

I am trying to update my iphone to the latest software version, but am getting a message saying 'make sure your network settings are correction and your connection is active'. i know my connection is active, so how can I fix this problem?

Hi there pamela123456,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
-Griff W.

Stopping sql server services while applying Service pack On SQL server 2008 and 2008 R2

Hi,
I am planning to apply service pack 3 for SQL 2008 R2 and Service pack 4 for SQL server 2008. This is my first time and I am applying first QA and DEV environment. I have one confusion. In cluster once you fail over sql resources to active node all of the
sql services including SQLSERVER and Agent are automatically stopped in passive node where we apply service pack. But in Stand alone, The services are not automatically stopped. Do I need to manually stop those services like SQLSERVER, Agent, Browser
and others if any before I start applying service pack?
Early Response is highly appreciated.
Thanks In Advance

Hello,
You don’t need to stop SQL Server services. Let SQL Server setup do it as needed.
Please read the following article for the cluster you would like to update:
https://support.microsoft.com/kb/958734?wa=wsignin1.0
The following article may be useful too:
http://www.sqlcoffee.com/Tips0014.htm
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How to make an user into Service authenticated user like cmadmin_service

Hi All,
I am trying to fetch the list of documents, properties, log on/logoff functionality with an iUser ex: epuser, through java code.
The list of docs are presented in the Documents Folder with teh following sample code
|
RID rid = RID.getRID("/documents");
String userName = "epuser";
IUserFactory userFactory = UMFactory.getUserFactory();
com.sap.security.api.IUser userNew;
userNew = userFactory.getUser(userName);
com.sapportals.portal.security.usermanagement.IUser user = WPUMFactory.getUserFactory().getEP5User(userNew);
ctx.setUser(user);
IResource res = null;
res = ResourceFactory.getInstance().getResource(rid, ctx);
wnen i am trying to fetch all the docs and the corresponding properties by passing " cmadmin_service " as an user name. i am getting the right results. But when i tried with "epuser " i am getting the output as Service Authentication value false.
Then i added epuser in the System Principal--->System User. still i am not getting the right results.
plz help me how to make this epuser as service authenticated user like cmadmin_service user

Hi phani,
I have no direct solution but you should check the service permissions of the resources you are trying to fetch. The exception sounds like there is the problem. Go to the Details of the CM-Resource and Select Settings-->Service Permissions.
Does the epuser has the necessary permissions for your operations?
Another thing is the way you are creating users:
The WPUMFactory has a special factory-method for creating service users. Perhaps this is a better aproach:
WPUMFactory.getServiceUserFactory().getServiceUser(user);
Best regards,
Stefan Brauneis

How to draw a perfect circle and how to make sure it is perfectly centered inside a square

How to draw a perfect circle and how to make sure it is perfectly centered inside a square in Photoshop elements using the Ellipse option.

1. Create a square canvas.
2. With the Elipse tool, hold down Shift (Shift forces a circle). Draw the circle anywhere on the canvas (Shape 1 in this example).
3. Simplify the circle layer
4. Ctrl-click the layer to select the circle.
5. Copy the selection to the clipboard (Edit > Copy).
6. Deselect the selection.
7. Paste from the clipboard (Edit > Paste). The pasted circle (Layer 1) will be centered.
8. Delete the original circle layer.
NOTE: Step 6 is the key. This guarantees that the pasted circle will be centered.
If you want a circle completely within a square you can simply draw and simplify a circle on any shape canvas. Ctlrl-click the circle to to select it and copy to the clipboard.
Then do File > New from Clipboard. This creates the circle cropped to a square on transparent background.

How to make sure that schema name is not included with generated sqls

How to make sure that schema name is not included with generated sqls with tableadapter wizard.
What should I use? Oledb, ODT.NET, where can set that I want "pure" sqls, not schemas, not ", or anything like this
I want
"Select a,b from t1" ,not "select "a","b" from schema.t1"
Also schema name is put in all parameters, all over the place... What if schema name changes. (b1test to b1prod)
. I now manually edit XML files of dataset. It works but....
thanks

The full hardware :
Processor Intel core due 3.00 MHz
RAM:1.5GB
psu:650 Watt (but i baught i cheap one so it may be actually about 400 watt)
HD Disk:160 GB
But about the power supply if it not able to run the VGA card ,Is it will not show any screen or it will not able to run the computer??

HT200131 how to make sure only my laptop can connect to my apple tv?

I don't want to see my flatmate apple tv under "connect"
how to make sure I don't click on his tv accidentally and he won't be able to connect mine?
thank you!

Hey J-Justin,
Great question! You can name your Apple TV to differentiate it from others in the AirPlay list:
Apple TV: Change the name of your Apple TV - Apple Support
http://support.apple.com/en-us/HT200028
Furthermore, you can setup an onscreen code or password to restrict access for AirPlay. The password method sounds like the best option for your setup:
Apple TV (2nd and 3rd generation): Understanding AirPlay settings - Apple Support
http://support.apple.com/en-us/HT202618
Set a password
Go to Settings > AirPlay > Security > Password > [set password]. You can use this setting to require a password for AirPlay-enabled devices to connect using AirPlay on the Apple TV. Use this setting if your device will need permanent access and you only want to enter the password once.
Thanks,
Matt M.

How to make sure I applied Service Pack correctly?

Similar Messages

Maybe you are looking for