How to make sure that schema name is not included with generated sqls

How to make sure that schema name is not included with generated sqls with tableadapter wizard.
What should I use? Oledb, ODT.NET, where can set that I want "pure" sqls, not schemas, not ", or anything like this
I want
"Select a,b from t1" ,not "select "a","b" from schema.t1"
Also schema name is put in all parameters, all over the place... What if schema name changes. (b1test to b1prod)
. I now manually edit XML files of dataset. It works but....
thanks

The full hardware :
Processor Intel core due 3.00 MHz
RAM:1.5GB
psu:650 Watt (but i baught i cheap one so it may be actually about 400 watt)
HD Disk:160 GB
But about the power supply if it not able to run the VGA card ,Is it will not show any screen or it will not able to run the computer??

Similar Messages

  • HT4515 How to make sure that after browsing that the webpage is not running in the background, but totally closed down

    How to make sure that after browsing that the webpage is not running in the background, but totally closed down

    Double tap the Home button, tap & hold the Safari icon until it starts to wiggle, tap the red minus sign to remove it from the Multi-Tasking bar. Tap the Home button when finished.

  • Windows Mail could not be started. Make sure that your disk is not full or that you are not out of memory (0x800C0155).

    I have Vista SP2. Every time I open Firefox (3.6.13), I get three consecutive error messages:
    1) Windows Mail could not be started. The application was unable to open the Windows Mail message store. Your Windows Mail mailbox data is currently being used by another program, such as a virus scanner. Close the program or wait for it to complete its operation, then open Windows Mail again (0x800C0155).
    2) Windows Mail could not be started. Make sure that your disk is not full or that you are not out of memory (0x800C0155).
    3) Windows Mail could not be started because MSOE.DLL could not be initialized.
    This series of messages continue to recur during my Firefox session and eventually will freeze up my session.
    I use Gmail. I do not use Windows Mail or Outlook Express and deleted Windows Live Mail. There is a a file named msoe.dll using the path C: /Program Files/Windows Mail. I also found C:/Program Files/Windows Live/RemoteActiveX even though I thought I deleted all Windows Live programs.
    I have set Firefox as the default browser. Also, in Firefox, if I click on "File=>Send Link", it triggers the series of three error messages above.
    I don't understand why Gmail would reference Winmail. Any ideas how I can fix this? Can I or should I delete the Windows Mail and Windows Live folders?

    I have had many problems with permissions on Windows Vista, 7,8 & 81.1.  It is usually after an update or installation, especially one that requires a reboot to finish (some AVG, Windows Live, Windows Updates, etc).  Once File(s), Folder(s)
    and Registry Key(s) permissions are screwed up, it can take days to work them out if ever.
    After having spent several hours on a clients PC and online forums with this problem.  I transferred her user profile with a free program called
    Transwiz (run as Administrator) to a zip file on the HDD.  I renamed her user in manage User Accounts to "Username old".  I then ran Transwiz again to restore the profile but telling it to create a new user using the original Username.
     After it completed restoring the profile, I logged out of "Username old" and logged in to Username and all wass well, I only needed to supply the email password which is not transferred.  When you move profile data, all the old permissions
    have to be removed and <st1:personname w:st="on">new</st1:personname> permissions added so the data and files belong to the <st1:personname w:st="on">new</st1:personname> user.  This cleared up all the permission
    problems.
    James Taylor

  • How to make sure that Invoices went through?

    I'm not sure if this is the right place to ask this question about EDI/IDocs.
    I want to make sure that the invoices for a particular day were received by the customer. How can I do this at the SAP level?
    I checked in WE02 and it shows me quite a few IDocs with status "07 Error during syntax check". Others are "53 Application document posted". But the customer complains that they have not been getting any invoices. Also, is there a way to see which IDoc number belongs to which Invoice number?
    Please suggest.
    Thanks

    Hi John,
       If you double click on the status 26 in IDOC (Txn. WE05), it will show you the error message with details of the error. Also you will notice that the IDOC is displayed as flat structure as opposed to a hierarchy. If IDOC is successfully sent out it will have a status record with status "03". I am not sure how you EDI subsystem is setup,  but if you are sure that it has been passed to EDI subsystem then why not check in the logs on EDI subsystem whether is was processed or not.
    Cheers,
    Sanjeev
    Message was edited by: Sanjeev Singh

  • How to make sure that "hello" uses gmail to send the invites?

    I am trying to invite someone to join a hello conversation but hello uses applemail in stead of my preferred gmail

    hi klaus, please make sure that you have set gmail as preferred app to handle mailto:-links in the firefox options like it's described in [[Change the program used to open email links]]

  • How to make sure that Safari opens in Full Screen

    When I open Safari in Mountain Lion it does not open in Full Screen.  I then get it there.  I close it.  I open it.  Does not open in full screen.  How to make it do so?

    you can download my fla project from here : http://www.megaupload.com/?d=V7QQ417Sthanks for help

  • When sending e-mails, how can I show only the name and not include the e-mail address?

    When sending e-mails, how can I show only the name of the recipient and not include their full e-mail address?

    Hi beverlyfromnull,
    Have you added the recipients to your address book?

  • Macbook Pro doesn't power up. How to make sure that's a logic board or IO board issue?

    Hi there,
    I've got Macbook Pro of this model http://everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-2-duo-2.16- 15-specs.html
    It's quite old. but as his owner told me it was working properly. Just in one day it went down. If he remembers that correctly it happend after he connected external display to it. So on press of power button, laptop doesn't react at all, even no any blinks of LEDs.
    When I connect MagSafe charge cable, LED lights up red/orange and starts to charge battery as usuall. green LED at the bottom of battery itself starts to blink. Can't say now does it charge or not I just have plugged it, but at least my quess some power comes through laptop to battery.
    Power button still doesn no effect when pushed.
    Are there any checklists or options to determine where is the problem?
    Looking forward any feedbacks on that matter
    Thank you in advance
    Regards
    Alex

    Still not sure how to troubleshoot the issue properly!
    Anyone?

  • How to Make Sure that the Apple Device and Printer are on the same Network

    Depending  on when one looks on this page, one can find members posting about issues with AirPrint or not being able to find the printer to use AirPrint. The first Item that people are told to check is the Apple Device’s settings. Sometimes the person giving instructions breaks down what to check and how to check and sometimes they do not.  Below is a video that walks one through how to print a network configuration page, what information they need to pull from that report and how to then access the Apple devices’ settings and put the device on the same network as the printer.  It then walks one through printing to the printer using the AirPrint feature. 
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?
    This question was solved.
    View Solution.

    I hope that this is helpful. 
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • How to make sure that two VC Ethernet modules are redundants

    Hi ,
    we have a blade  encluser has 16 servers and two ethernet module
    each ethernet  port is configured as a single SUS , So if one of module is failed  we are expected we will lost network connectivity of these ports
    I read many senarios  but all depend on network teaming on the serves
    Our system requirement as below
    1-Two module be redundants - so  network connectivity is up incase one of module is failed.
    2-Don't configure network team on the blade servers
    thanks

    Hi ,
    we have a blade  encluser has 16 servers and two ethernet module
    each ethernet  port is configured as a single SUS , So if one of module is failed  we are expected we will lost network connectivity of these ports
    I read many senarios  but all depend on network teaming on the serves
    Our system requirement as below
    1-Two module be redundants - so  network connectivity is up incase one of module is failed.
    2-Don't configure network team on the blade servers
    thanks

  • When i try to restore my ipod touch 4g itunes keep telling me that to make sure that my network setting is correct,and make sure that i connected to the internet ?

    when i try to restore my ipod touch 4g itunes keep telling me that to make sure that my network setting is correct,and make sure that i connected to the internet,wht is that supose to mean i allredy connected to the inter net but i dont know how to make sure that my network sitting is correct help me plz

    Try:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

  • I purchased three albums last week and only two of them were charged.   How can I make sure that the third album gets charged in a timely fashion?

    I purchased three albums last week and only two of them were charged.   How can I make sure that the third album gets charged in a timely fashion?

    Well, thanks for feeling with me, patkosanke ... AND for your wise advice.
    I did followed your advice immediately and erased all the service number as well as S/Ns.
    Can you, however, give me any "direct number" through which I can get hold of someone and request for what you're suggesting?
    I believe I had talked with the person by the name of "Charlie" (I think... I hope I'm correct...) when I was having the same problem with the last device. He was very kind and helpful, though I ended up getting the device that brought the same problem.
    Charlie told me that if I had any more problems I should call him. But I forgot to take down his direct number.
    Or maybe I should call the main office and ask for him. But my memory is questionable as to his name, and besides I don't even know his last name either. There could be more than one "Charlies" in Palm.
    So, if you could somehow email me some direct number (other than the one that keeps on hooking me up with those people in the overseas who are answering the phone only to sympathize with & apologize to me but can only issue a false hope with the SRO#. More than once I was given the promise that the supervisor would call me back within an hour or two but I ended up calling back after I had been left hanging in the air all night long.) where I can talk to someone like I did with Charlie last time who can truly carry out the promise, I would truly appreciate it, patkosanke. ^^
    Thanks
    jcinlovewpalmTX
    Post relates to: Palm TX
    Post relates to: Palm TX
    Message Edited by jcinlovewpalmTX on 03-05-2009 06:36 PM
    Message Edited by jcinlovewpalmTX on 03-05-2009 06:36 PM

  • EDiscovery_SharePoint 2013_After a set of content is placed on hold in a location, how do I make sure that anything added to the same location

    Hi everyone,
    After a set of content is placed on hold in a location, how do I make sure that anything added to the same location,that meets the filter (e.g. keyword) gets added to the hold automatically ?
    Right now the only way I can do this is to take off the hold ,re-apply the filter to the source and then enable the hold. That isn't sustainable.

    @arcycapa,
    If you have a Mac, you can download iDentify2 (http://identify2.arrmihardies.com/). It is free. You can use that change or set your contentRating. If you are on Windows, there is a commercial tool called MetaX. or download a free command line tool called AtomicParsley from (https://bitbucket.org/wez/atomicparsley). Unzip the file and run this command (AtomicParsley "C:/Users/Home Videos/name of the file.mp4" --contentRating R) from the DOS prompt without the parenthesis. Please keep in mind the forward slash in the path name listed above. This would generate a temp file. You can rename the temp file to the original file name. Just a word of caution, please make a copy of your original file somewhere. Just in case.
    Shekhar.

  • How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

    how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

    It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

  • Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the rows? Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

    Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
    Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

    The Oracle documentation has a good overview of the options available
    Generating XML Data from the Database
    Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
    You can also find some information in XML DB FAQ

Maybe you are looking for

  • Unnecessary Purchasing Processing Time in scheduling agreement

    According to its business logic, the scheduling agreement is a document  that has  already been  released  by purchasing department,  and  its scheduling lines, that have been created by MRP  are valid for goods receipt without any need for additiona

  • Having trouble with Instagram on i-phone 6 plus

    Does anyone know how to upload photos to Instagram from the i-phone 6 plus? I have tried everything!

  • Prob in entering custom wagetype in IT0008 and IT2010

    I have created a custom wage type 9b01. It is supposed to be calculated based on the no of hrs entered for an employee and the amt should be calculated automatically. I am successfully able to do that by entering this wage type in infotype 2010(and e

  • Making names used to create comments anonymous

    Is there any way to make user names in comments anonymous? We receive several hundred PDFs of academic/medical/science research each year, many of which have previously applied comments embedded. We are looking for a quick way of changing the user na

  • Apache seems to be spawning jave.exe

    processes that don't die. I have made a Java Servlet Portlet. It works fine, but it seems that Apache is spawning a lot of java.exe's and they don't die, when I am accessing the my portlet through the Portal. And if I stop Apache they still hang arou