How to make Target Value field mandatory in WK contracts

Dear All,
Can the Target Value field in quantity contracts be set to a mandatory field like in Value contracts?
Regards.

Hi
quantity contracts are used when you would like to limit quantity irrespective of the value of contract. Therefore quantity field is made mandatory here.
similarly value contract is used when you would like to limit value irrespective of quantity of goods.Therefore value field is made mandatory here.
Hope it helps you.

Similar Messages

How to make the CATEGORY field mandatory in the SMIN Support Ticket in test management?

Hi,
how to make the CATEGORY field mandatory in the SMIN Support Ticket in test management?
Rg,
Karthik

Hi Kamal,
This note steps will no validation that the user actually enters a value and the message will be created even if this 'required field' is left blank.
Any other way to validate the enter a value also?
Rg,
Karthik

How to make Sales Office field mandatory in VA01 initial screen?

Hi,
How to make Sales Office field mandatory in VA01 initial screen? I mean in the first screen where we enter the document type and the sales area?
Regards,
Ajit

Dear Deepak,
Thanks for the clarification.
But, as far, I have understood the query - it is very simple and that is..
Whenever one creates a Sales Order (T.Code: VA01), Parameter: Sales Office needs to be mandatory (for all Sales Order, irrespective of Customer Account).
Until-unless, user won't enter the parameter: Sales Office, System will not lead to next page (now, here we need to enter Customer/ material etc...).
I have answered the query, in this regards, only.
Best Regards,
Amit.
Note: Pls. correct me, if I am wrong. Thanks for everyones guidance.

How to make tax classification field mandatory in sales order ?

Hi,
while creating sales order, " how to make tax classification field mandatory ".
Please tell me the procedure.
In tcode OVA2. what are the entries for fields,table.
Regards,
sapsduser

Dear ,
Could you please share why you want to make tax Classification field mandatory in sales order.
Maintain Tax classification field for customer in Customer Master Data = (Sales Area Data - Billing document Tab page)
Tax Classification field for Material in Material Master Data = Sales Org. 1 View.
While creating sales order and enter customer and material system automatically fetch the tax classification related data into sales order.
Tax is calculated based on the ship to party.
Hope this will help you.....
Regards,
Manoranjan.

How to make material code field mandatory in VA01

Dear all,
I want to make material code field mandatory while creating sales order (VA01). As of now even if I dont enter material code , and just enter customer code and P.O. number , I am able to save my sales order.
I tried to do it with incompletion log , but could not succeed.
SHD0 could be an option, is there any simpler way out ?
Please suggest.
Regards,

Hi,
You have 2 options.
1 - Incompletion Log
If you add Material filed to your incompletion log, then when you try to save the sales order it'll give the "Save / Edit" pop up message. But then by pressing Save button you can save the sales order.
If you want to avoid that pop up; do this. (To avoid user saving Incomplete sales orders)
Go to VOV8 Tx.
Go in to your sales document type
Under "Transaction flow" section mark the "IIncompletion messages" tick box
Then try with a new sales order without a material number
If won't give that pop up message any more where as it'll always go in to the incompletion log. So you can't save it without maintaining the material.
That's a alternative way of doing.
2- SHD0.
Best regards,
Anupa

How to make "Marketing lead" fields Mandatory ?

HI Experts ,
I have very urgent requirement . I have to make "Marketing Lead" attribute mandatory and what object is behind it .
I have to make "Phone" & "email" as mandatory fields but i don't know where to start and what object i have to enhance .
Any suggestion will really appreciated .
Regards ,
Rishi

Hi Rishi,
That's probably COD_MarketingLead.QC screen.
Open this screen, select the Section Group, go to Ext. Explorer, and click on Adjust Properties.
Find the field you want to set as mandatory and change this property to True. This will make the blue star appears right next to the field.
Then write a logic just like suggested by Sunil in the OnSave.absl script to add a hard stop in case the field is not filled, with error messages, etc.
Hope this helps!
Best regards,
Fernando Giroleti
SAP Cloud Service Center AMEA

Help required: how to makes sales office field mandatory, in inquiry and qu

I want to make the field sales office as mandatory , in Inquiry and quotation, please guide me how i can do it.

hi
if so then u do one thing.. enter the Tcode and then in variant name .. keep the field empty and search for Transaction variant by giving only the tcode.VA11
if u find any transaction variants for Va11 then u can use that or else serach with VA01 and c how many Transaction Variants u r getting.. to my guess u must only be getting BUS2030..
if that is the case u have to create new transaction variant for va11 and then proceed the process
=====================
GOT THE SOLUTION
=====================
SHD0 > enter tcode VA11 > F5 > Give the Enquiry type (IN) > give the details sales org, dist chnl, div, > Press Enter > will get the fields with options..
Same in the case of VA21 .. giving sales org , dist chnl, div is not compulsary.. just give the document type and can proceed..
Reward if USeful
Thanx.. Naren..

How to make default values in selection field?

hi,
      i have selection field date , using data element 'QENTST' using following code in view INIT Method. i get the input selection field when i test application.
DATA: LT_RANGE_TABLE TYPE REF TO DATA.
CALL METHOD WD_THIS->M_HANDLER->CREATE_RANGE_TABLE
EXPORTING
    I_TYPENAME                     =     'QENTST'
RECEIVING
    RT_RANGE_TABLE           =     LT_RANGE_TABLE.
CALL METHOD WD_THIS->M_HANDLER->ADD_SELECTION_FIELD
EXPORTING
    I_ID                                     = 'QENTST'
    IT_RESULT                         = LT_RANGE_TABLE
    I_OBLIGATORY                 = ABAP_TRUE.
What i need now , to make default value in this selection field( low = sy-datum and high = sy-datum + 10 ) . I have checked , i found one method called... SET_RANGE_TABLE_OF_SEL_FIELD. Bt i m not able to understand how to assign values to input table parameter in this method?
Thanks In Advance.
Saurin Shah

Hi,
Refer this Article by Thomas on how to make default values in Select Options:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60474842-91ca-2b10-3390-d2fd30f335fd
I hope it would solve your problem.

How to make WBS element field in Notification a mandatory.

How to make WBS element field in Notification a mandatory.
Should I use USer Exit.
In cutomization I didnt find ant standard customization

Hi,
If it is about WBS element field in Maintenance Order then check up user exit ;- IWO10009 PM Order: Customer Check for 'Save' Event
For Notification i am not sure whether this field is ther , but anything u can perform checkings via
QQMA0014 QM/PM/SM: Checks before saving a notification
Alternatively u can also explore via Transaction variant SHD0 ..
regards
pushpa

Can you suggest how I can make only "salesperson" field mandatory?????

Hi gurus,
I want to make the field "Salesperson" in the Communication tab in the PO header mandatory.
When I set the field selection accordingly(field "salesperson" as required entry), other fields such as your reference, our reference, telephone number becomes mandatory.
can you suggest how I can make only "salesperson" field mandatory without making related fields mandatory?????
Regards
Sara

Hi,
Go to spro->MM->purchasing->PO->Define screen out at document -> select NBF ->Reference data, header->set field Reference, salesperson etc. as mandatory.
reward full point if resolve,
Regards,
Chetan.

Re: How make delivery group field mandatory in va02 in shipping tab in sap abap

/h
Hi experts i want to make delivery group field mandatory in va02 in shipping tab using enhancements. can anybody help me
<removed by moderator>
With Best Regards
Nagaraj
/h
Message was edited by: Manish Kumar

Hi Nagaraj Muniyappa,
Can please show me a snapshot of the same? Because I didn't found any delivery group field in shipping tab in VA02.
And there are many exits/badis are available for sales order you can use them.
regards,
Rajesh Sadula.

Need to Make end customer field mandatory in sales order form.

I need to make end customer field mandatory when sales channel entered as some value...
for this i have used when validate record on order form
when i enter a value in sales channel as desired value the form is getting saved automatically and the field is getting mandatory
but my requirement is to make field mandatory and then to save the order.
let me know the sequence how it works if any one knows.

Sanni,
>
when i enter a value in sales channel as desired value the form is <b>getting saved automatically</b> and (then) the <b>field is getting mandatory</b>
but my requirement is to make field mandatory and then to save the order.
>
Which trigger are you using to do the "getting saved automatically'?
Does this trigger fire before the trigger that is making the field mandatory?
Regards,
PS: Is this an Oracle EBS query? If yes, this is the wrong forum
Edited by: Prabodh on Jun 14, 2012 4:48 PM

How to make valuation type field not changeable in delivery tab of PO

Hai friends,
I am new to badis..please guide me to solve the issue...
how to make valuation type field not changeable in delivery tab of PO...
The field shd be in display mode only ...actually...there a badi has been used before
to get valuation type from a ztable depending on material and plant...
Now ..my requirement is that the user shd not change the default value brought from the ztable...

Hi SRINIVAS,
You can achieve this from BADI only if BADI is allows you to do this. You cannot achieve everything from a BADI. Check if there is any expoting field in the methods that can be ticked for making the field in display mode. If not then you cannot achieve this from BADI.
The field you want to default to display is a standard or zfield. If z, then you can changethe attribute of the screen field to Output only.
Regards,
Manish

How to make visible value attributes of a Search Node

Hi All,
We have a requirement to enhance the search context node SEARCH ( Dynamic Query Object SVYQ ) of component SVY_S.
But the enhancement category of Attribute Structure CRMST_QUERY_SVYIL is 'Can't be enhanced'.
So we are adding value attributes to this context node. How to make this value attributes available in view configuration tab?
Please suggest a better approach if there is any.
Thanks in adv.

Hi Suchindra,
You assign these enhanced attributes to design layer. so you can see these fields in Config tab.
How to do:
IMG->Customer Relationship Management -> UI Framework -> UI Framework definition -> Maintain
design layer
Here include the enhanced attributes and then go to component work bench and in context attributes right click assign the desing layer, selct your attribute and in the bottom click on SAVE button.
Then check it in configuration tab your attributes will available in show available fields.
I hope this will solve your problem
Regards,
Sagar

Vendor Master Management - How to make 'Corporate Group' field an autoupdat

Vendor Master Management - How to make 'Corporate Group' field an automatically updated field
Frnz,
I am doing a Spend Analysis and thereby restructring some aspects of SAP and business processes. One of the intiatives is to leverage the 'Corporate Group' field in Vendor Master for getting the consolidated spend visibility at the corporate group level of vendors. So far this field wasn't been used to effect. I can update it manually, but the question remains is how do I do with the change management of the corporate group of large vendor base in the scenario of everhappening Mergers and Acquisitions. Are there any alternatives anybody can suggest ? (Like linking D&B numbers etc)
Thanks in advance for your suggestions..

Hi Shiv,
Let me elaborate the purpose of using this field. I want to have a consolidated spend visibility across a corporate group which has multiple vendor codes. Its difficult everytime to group the spends of these vendors manually especially when the number of vendors are too high. Also sometimes the names of vendor companies may not indicate that these are from same corporate group but in fact they could be. In order to have the reports generated on corporate groups, I must maintain this field in vendor master or a Z table. But the problem here is, it should be possible to update this field as and when there are any mergers or acquisitions at vendor side and the corporate group of a particular vendor gets changed due to this. So this has to be effected in vendor master or Z-table automatically. I do know that there are certain agencies like Dunn & Brad (DNB) which provide possibly the details on corporate group of a company but its not fully effective for Indian Vendors as its not mandatory on them to have DNB number & also its a disconnected process and I was looking to connect it seamlessly to Corporate Group field so that I need not bother to update these things manually everytime. I also wanted to explore various possibilities of doing this.
I hope I have spelled it out correctly.

How to make Target Value field mandatory in WK contracts

Similar Messages

Maybe you are looking for