How to make the graph follows the position of the video frame

Hai..
I want to open the video (. avi) and graph together in one VI.. The videos and graphs can be controlled (forwarded or rewind) in the desired position.. However, the graph should follow where's the position of the video frame..   The graph generated from the data in excel, after reading data, then there is the processing of signals, such as filter, mean, find the peak, etc.. After that the result will appear in the graph..
Until now, I've been able to display video and graph.. I'm trying to use WMP and also IMAQ..
Because I want to show the position of the graph or signal when the video plays, I was making a cursor or a line on a graph that follows the position of the video..
First, I'm trying using WMP.. I can forward and rewind video using WMP, after that I make a cursor on the graph and the position of cursor I put in the position video.. And then when I run the program, the signal that arises from the right, but the cursor in the graph follow the position of the video (the cursor appears on the left) different side with the signal..
I also tried using IMAQ when I tried to use the video controls, so the video can be forward or rewind using the slide, and I made a graph control to follow the video.. But the video isn't playing, it just show only images or frame in the video..
Can we create a graph that can follow the position of the video? (graph can be in forward and rewind just like with video)
I've tried many ways but until now have not been successful.. can someone help me?
Any help is greatly appreciated thank you.

This should do pretty much what you want, assuming that a slider is how you are controlling your video position. You are going to have to play around with it a little but it should give you the basic idea.
Attachments:
Slider.vi ‏35 KB

Similar Messages

  • How to make use of adjacent data elements within the same buffer

    Hi,
             Does anyone know how to make use of adjacent data elements within the same buffer? To make my question clearly, I would like to give you an example. In my application, I set "sample to read" as 10 which means at each loop 10 data samples will be taken into a buffer. Now, what I would like to do is to do some calculations on adjacent data samples in same buffer. I tried to use "shift register" for this, but it seemed to me that it only can deal with the calculation between data from adjacent loops. In other words, it skips 9 data elements and take the 10th one for the calculation.
             Here I also attach my VI showing what I did.
        Thank you very much in advance,
                            Suksun
    Attachments:
    wheel_encoder_1.vi ‏98 KB

    Hi Suksun,
          I hope you'll forgive me for distilling your code - mainly to understand it better.  I tried to duplicate your logic exactly - which required reversing the "derivatives"-array before concatination with the current samples array.  As in your code, the last velocity is being paired with the first position.  If first velocity is really supposed to be paired with first position, just remove the "Reverse 1D Array" node.
    cheers
    Message Edited by Dynamik on 01-07-2006 03:17 AM
    Message Edited by Dynamik on 01-07-2006 03:19 AM
    When they give imbeciles handicap-parking, I won't have so far to walk!
    Attachments:
    encoder2.GIF ‏14 KB
    encoder2.vi ‏102 KB

  • Hi , How to make a calculated kf as local in the query definition

    Hi ,
    How to make a calculated kf as local in the query definition
    Regards,
    Ravi.

    Hi,
    Calculate KF consists of Basic, restrict and other calculated kFs stored in Metadata repository.
    Calculate KF is a replicate of Formula and acts as Global.
    Calculate KF acts as Global--you can use Globally.
    Formula as Local--you can use as local to Query.
    you can create the Calculate KF as follow:
    Goto Query Designer>Open/Create Query>Select Key Figures Mode on left side of Query>Select that KF node> right click Select Calculate Keyfigure.
    then one popup window dispays, so you make the calculations based on Basic KF, Restirct Kf and Formule. then save it.
    Regards,
    Suman.

  • How to make ENTER key in internet explorer run the  BIP report?

    In BI publisher 11g, users wanted that after entering the values for the parameter, they hit the ENTER key ( on the keyboard)  and the report should run .
    In Mozilla firefox, when I hit ENTER key on the keyboard report runs fine... but in Internet explorer, it does not ( infact in internet explorer TAB key works)
    How to make ENTER key in internet explorer run the report?
    Thanks
    Ashish

    Perform the following steps and tell us if it  resolve this issue:
    1. In Internet Explorer, click Tools, and then click Internet Options.
    2. Click the Security tab.
    3. There are four security zones listed:
    * Internet
    * Local intranet
    * Trusted sites
    * Restricted sites
    Click the zone being used by P6, which is noted at the bottom right hand corner of the browser window when the P6 URL is being accessed.
    4. Under Security level for this zone, click Custom Level.
    5. Under Downloads, under Automatic prompting for file downloads, click Enable, and then click OK two times.
    6. The browser will need to be restarted for the change to take effect.
    Refer to the following Microsoft Knowledge base article for additional file download and active x controls which should also be enabled: http://support.microsoft.com/kb/883255

  • How to make a redirect without auto-redirect from the portlet "edit" mode?

    How to make a redirect without auto-redirect from the portlet "edit" mode?
    I use some sofisticated customizing with server-side validation of the form data. I want to redirect to the page of the portlet "show" mode and to the "edit" mode depending on the validation results. How can I do it?

    Heay.....this worked for me.
    I am able to change the mode programatically from edit to show.
    HttpPortletRendererUtil.handleEditAction(portletRenderRequest,"OK");
    I removed Apply , OK and Cancel buttons and applied my own Submit and Back button in Personalize mode and then change the mode to show on click of Back button using the above mentioned statement.
    Thanks
    ~Neeraj Sidhaye
    Try_Catch_Finally @ Y !
    ExtremePortal @ Gmail　Ｄｏｔ　Ｃｏｍ

  • How to make an ebook and sell it on the ibook or app store??

    How to make an ebook and sell it on the ibook or app store??
    Can anybody help me please T^T
    By the way I'm in Thailand and want to sell my ebook around the world.
    This is my dream ^^.. Help me please...

    Hi,
    Start with the ADC iOS dev center here.
    http://developer.apple.com/devcenter/ios/index.action
    Carolyn

  • How to make more than one person can access the database at one time

    how to make  more than one person can access the database at one time 

    Please post further f'up's in the Access forum.
    In short: for different reasons it is best practice that each user gets its own local copy of the database. This means that you need to split it into a front-end which only consists of the forms, queries, reports etc. Everything which doesn't need to be
    shared. And a back-end, which only stores the data.
    Take also a look at Allen Browne's article:
    Split your Access database into data and application.
    When you've splitted your database, you may often consider to use SQL Server as back-end. Here you may read Armen Stein's
    The Best of Both Worlds: Access-SQL Server Optimization.

  • Hello, i would like to know how to make horizontal sites and it moves with the scroll

    Hello, i would like to know how to make horizontal sites and it moves with the scroll

    Hi
    You can refer to these videos :
    http://www.lynda.com/Muse-tutorials/basics-horizontal-scrolling-websites/108131/115685-4.h tml
    https://www.youtube.com/watch?v=gZI_K1TXqOM
    Thanks,
    Sanjit

  • Will apple next update to help fix the location following data problems will the ipod touch 2g be included ?

    will apple next update to help fix the location following data problems will the ipod touch 2g be included ?

    Chances are the 2g itouch will not be included in the update. Also no one yet knows if it will be fixed in the next firmware but apple has said they know of this bug.

  • Does anyone here know how to make a background soundtrack for a Tai Chi Video?

    Good morning,
    Does anyone here know how to make a background soundtrack for a Tai Chi Video in Garageband. I have been looking around at the different sounds and music in Garageband but I have not been able to find anything that would go with the video.
    Here is an example of a Tai chi video if you were wondering
    http://youtu.be/a6pJf2otwv8
    I want to create something like this for a video I did for a fitness gym for a Yoga instructor and Tai Chi instructor.
    Any tips would be appreciated.

    Brandon,
    you will not have to do any importing in GarageBand. Intalling Mainstage will extent GarageBands Loop Library and Instruments Library.
    After you installed MainStage the additional loops and Instruments will show in GarageBand just like all other Loops. you will simply see more loops.
    For example:
    or:

  • HOW TO MAKE AN ANIMATION SCENE GO BACK TO THE NAVIGATION?

    I'm creating this animation for a class and I'm supposed to do the following:
    "Build a basic animation that runs for 10 secs and then returns to the navigation area in scene one."
    the highlighted text is what i need to do..can anyone tell me how to do it in Action Script 2.0?!?..thanks..I really appreciate the favor!

    thanks but uhm perhaps i was not specific enough..heres the full assignment:
    Controling the Timeline in a multi scene movie
    Scene one - Build a one frame navigation scene with three buttons. Each button should link the user to one of scenes in the flash movie. Make sure that this scene is paused from the start to prevent the playhead from moving past the navigation buttons in the first scene.
    Scene two - Build a basic animation that runs for 10 secs and then returns to the navigation area in scene one.
    Scene three - Build another basic animation that runs for 10 secs and then returns to the navigation area in scene one.
    Scene four - Build a final basic animation that runs for 10 secs and then returns to the navigation area in scene one.
    Extra Credit -  Add sound to the file that begins as each scene begins to play and that ends when the playhead returns to the main navigation scene.
    I've created the buttons and few scenes but i just want the scenes after playing to go back to the navigation area and maybe you can tell me how to how make sure scene one is paused from the start..thanks

  • How to make a simple C program universal from the command line???

    Hi all,
    I've developed widgets that use a simple C program. I had no clue how to make it universal. Apple documentation is all about big projects to be developed inside Xcode and so on, but I don't understand even the introductory remarks...
    As far as I've read, I have to make a binary for PPC and a binary for i386, and then merge it with lipo. Fine. I get my PPC binary from:
    gcc-4.0 prog.c -o prog_ppc -lm -arch ppc -arch ppc64
    Now, it seems that I have to use:
    gcc-4.0 prog.c -o prog_i386 -lm -arch i386
    The latter command didn't work until I added -L/Developer/SDKs/MacOSX10.4u.sdk/usr/lib/ at the end. With this, it creates a binary file, but with the following message:
    /usr/bin/ld: warning fat file: /usr/lib/system/libmathCommon.A.dylib does not contain an architecture that matches the specified -arch flag: i386 (file ignored)
    and I guess this is quite an issue if I don't have the common math functions, no?...
    Can somebody help me? I googled a lot on this, and found nothing helpful.
    Cédric

    Thanks, it helped me. I googled a bit to build up my Makefile, and this is what I got.
    CC= gcc-4.0
    CFLAGS= -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch ppc -arch i386
    LDFLAGS= -Wl,-syslibroot,/Developer/SDKs/MacOSX10.4u.sdk -lm
    TARGETS= skycalc.fixed.c
    all: $(TARGETS)
    $(CC) $(TARGETS) $(CFLAGS) $(LDFLAGS) -o skycalc_universal
    Thanks again.

  • I was able copy the hardrive of my old macbook from "My Passport" onto the desktop on an older iMac. but i dont know how to make my hardrive and user name be the main one since someone had used it in the past and had their info on the comp. please help!

    I recently broke my 2008 macbook. i was able to use an external hardrive to back up my data onto My Passport. I was going to buy a new computer but a friend told me sher had an older version of the iMac. (not sure how old but it doesnt have a camera if that helps) i was able to hook it up and turn it on but i ran into a few problems. 1) the "authentic" user or whatever it says is someone who previously used the computer. i added me as a user but im not sure how to make me the main user. 2) after hooking up My Passport, i was able to drag my files and copy them to the desktop.(i think i did it correctly) now, i dont know how to make my hard drive and applications and iformation the "main " info. The current apps on the iMac are super old versions of iTunes and iPhoto and such. 3) while trying to open the apps from my macbook on the iMac, it said it didnt have the right software to open these apps.
    I am so computer illiterate so someone please help!!! Also, i do not have internet in my new apartment yet so if there is a way to make this happen without using the internet that would be preferred. sorry for the horrible spelling and poorly written paragraph.
    THANK YOU!!

    You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
    You need to get a new computer or a refurbished one.

  • How can I print out the graph I need only, without the controls and indicators?

    I'm doing some programming in LABVIEW. I need to print out only the graph, without the buttons, controls, indicators. I tried to look for such a function in LABVIEW, but in vain. How can I achieve the result I expect in my programming?

    Hi Fenny,
    you should use the report generation functions to create a report containing your graph image and print it.
    Take a look at the Sample Test Report.vi you find in the report examples of LV.
    Just look at the part of the diagram where it is used Append Control Image to report.vi (in the center of the report functions chain); a graph reference is wired to the Ctrl reference input ( to create a reference of your graph right click on it and select create reference).
    Let me know if you need more help,
    Alberto

  • How to make a JTree respond to changes in the Hashtable

    Hi,
    Can anyone give the classes and methods from which I can make the JTree reflect to changes in the Hashtable. Im using the hashtable to construct a JTree but changes in hashtable are not reflected to the JTree.
    I used tree.updateUI(). It works if I insert to a collapsed node. In case a node is expanded and if I add a node to it through the Hashtable it does not reflect.
    Thanking u,
    Karan.

    A JTree will reflect changes made to its model if this model does fire the appropriate events. So, make sure to update the tree's model whenever necessary. See also [How to Use Trees|http://java.sun.com/docs/books/tutorial/uiswing/components/tree.html].

Maybe you are looking for