How to make third party cables work on iphone?

I have been using the original Apple charger cable that came with my phone (iPhone 5C) for a good year, but then it broke. So I bought this non-Apple cable because I didn't really wanna spend a lot of money for an original one. I have already charged my phone with third-party cables before, so I thought it would work. The first time I used the non-Apple cord, there were minor difficulties because I had to plug and un-plug it several times before it actually charged. 2 days later, I plugged an original cable (which was my sister's) to charge my iPhone. Obviously, it worked. But later on, when I went to charge my iPhone with the non-Apple cable, a message popped up (This accessory may not be supported). I dismissed it, thinking it would still charge. No such luck. I tried to unplug and plug it, but still, it won't charge. Now, I have to charge through my laptop. Can anyone tell me how to make third-party cables work? I don't really wanna bring my laptop everytime I charge. I'm planning to only use this cable until I get my hands on an original one. Please help.

Are you seeing the EE (or T-Mobile) network name and network bars in the top right hand corner of the screen? Turn off WiFi (Settings>WiFi - turn this off). Is there anything next to the network name in the top right hand corner (3G, E or o)? E is Edge and o = GPRS.
If there's nothing next to the network name, turn off the iPhone and then turn it back on. To do this, press and hold down the button on the top until you see the 'Slide to Power Off' message. Slide and then wait for the iPhone to shut down. To turn it back on again, press and hold the top button again unti lkthe Apple logo shows on the screen.
EE and signal bars top left = Yes
Turned off Wifi and next to the EE is 'o' which you say is GPRS? What does that mean please??
Got this reply from another forum but still no success???

Similar Messages

How are the third party apps for the iPhone?

Being a long time Palm user, then moved to BlackBerry I watched the quality of third party apps really plummet due to a more restrictive development agreement.
Now considering an iPhone, I'm curious about how healthy the 3rd party app community is for iPhone, something I miss from my Palm days. From what I've heard, the development for iPhone applications is even more restrictive than for BlackBerries.
Anyone that wouldn't mind addressing one or all of these questions for me from their own experience, would be greatly appreciated.
1) Do you use third party applications on your iPhone, or do you find the native Apple software to be sufficient?
2) Are there alot of different choices for utilities, or do you find yourself pigeonholed to 1-2 programs.
3) Would you say that the third party apps are "mature" that is stable, follow similar flow/integration with the phone and designed in an intuitive way?
Again thanks for anyone that chooses to help me with this. I was really disappointed with the apps available for the Blackberry. At $15-$25 dollars each, I was usually let down by the quality and selection and overall experience.

Snarg wrote:
1) Do you use third party applications on your iPhone, or do you find the native Apple software to be sufficient?
The native software is excellent and I also have apps to fill in for things not available as part of the out of the box iPhone.
2) Are there alot of different choices for utilities, or do you find yourself pigeonholed to 1-2 programs.
If you go to the app store and browse, you'll find lots of different utilities. In some cases, there are a dozen different options that do the same basic thing and in other cases there are a couple.
3) Would you say that the third party apps are "mature" that is stable, follow similar flow/integration with the phone and designed in an intuitive way?
Some apps are well done and others aren't. Since they are developed independently, there is variability. The apps I use most frequently seem pretty stable. It all depends on your needs.

How to make tmobile sim card work on iphone 4

My daughter has a SIM pay monthly deal on T-Mobile and I have just bought an unlocked to EE/Orange/T-Mobile iphone4.
Why can the number not receive/make calls or texts?
SIM only pay monthly 10 (12 months) is the phone plan

Are you seeing the EE (or T-Mobile) network name and network bars in the top right hand corner of the screen? Turn off WiFi (Settings>WiFi - turn this off). Is there anything next to the network name in the top right hand corner (3G, E or o)? E is Edge and o = GPRS.
If there's nothing next to the network name, turn off the iPhone and then turn it back on. To do this, press and hold down the button on the top until you see the 'Slide to Power Off' message. Slide and then wait for the iPhone to shut down. To turn it back on again, press and hold the top button again unti lkthe Apple logo shows on the screen.
EE and signal bars top left = Yes
Turned off Wifi and next to the EE is 'o' which you say is GPRS? What does that mean please??
Got this reply from another forum but still no success???

How do you make third party application window backmost using labview

Hi Guys
I know i can do whatever i want on labview windows.i can make third party application window frontmost.
But How to make third party applicaiton window backmost using labview.
Thanks

Hi wenjie1wang,
I have attached an example that uses the "Call Library Function Node" that accesses the "user32.dll" file that is responsible for manipulating with the windows such as minimising it.
After opening the VI you have to enter the name of the window you want to minimise, you can hard code that as a constant. Also on the front panel the control "nCmdShow" can be changed to dictate the action you want to do with the window.
Furthermore, please look at the Microsoft Developers Network to find more useful ways to use the property node in your project.
http://msdn.microsoft.com/en-US/
Let me know if this works.
Regards
Art
Applications Engineer
National Instruments
Attachments:
Minimise Window in Win7.vi ‏14 KB

How is an OCR executed in Acrobat X Pro? Recognize does not work. Third Party OCR works great!

How is an OCR executed in Acrobat X Pro? Recognize text does not work. Third Party OCR works great!

How was the pdf created. When I want to get the best results I scan to TIFF at 300 dpi and then import the TIFF file into Acrobat.
What scan resolution and format for the scan was used?

HT4623 How to stop third party apps download with out you permission from ATT partners that cant see any connections on your account due to you not being the prchaser?

How to stop third party apps download with out you permission from ATT partners that cant see any connections on your account due to you not being the purchaser or on account as long as someone else is paying they can not hold legal resposible there third privacy due to legal privacy laws.

Then you should read these.
http://forums.macrumors.com/showthread.php?t=1804704&highlight=sonnet+tempo+pro
http://forums.macrumors.com/showthread.php?t=1721573&highlight=sonnet+tempo+pro
This was strange but has to do with how startup disk and nvram interact
http://forums.macrumors.com/showthread.php?t=1795765
I think your problems were solvable and not that the Sonnet card and 5,1 is not bootable, in fact the 5,1 is easier, there are more supported cards.
I have the 1,1 where the Sonnet Pro is recommended but for data only and are not bootable because of the 32-bit EFI firmware. NOT the 4,1 and 5,1. The 2008's are problem child and have a mix of PCIe 1.1 slots, first implementation of EFI64 that also has problems. Also the 4,1 has two PCIe 2.x slots 3 and 4 that share a controller but that simply limits bandwidth.
I would have left the TRIM support and NVRAM changes in Yosemite to a separate thread if you wanted to focus on the Sonnet Tempo Pro support in Mac Pro 2010-12 5,1s.
Also the make of SSD can vary and they also have their own firmware as do bootable controllers along with the EFI of the Mac, all of which have to work together. Meaning it might be that Samsung 840 va 840 EVO vs 840 Pro will all be slightly different but my experience is Samsungs work well (as do others like Crucial with the proper firmware - and there was/is an issue with the firmware of the Samsung 840 but not with booting).
The PCIe card gets seen and treated as external and therefore 'eject' but of course you can't when it is the system boot drive.
One thing I found last week and meant to mention: After installing or changing PCIe cards, RESET SMC made all the difference in the world with the long boot delay. Some PCIe cards will add a few seconds, system has to search the device tree which now shows another controller with multiple devices - and sometimes NVRAM and SMC are what I will call "dirty" and need to be rebuilt and reset.

How to configure third party order ?

how to configure third party order ? and how the business know that the customer has received the goods so that invoice to be raised?

hi shoban,
Third party order processing is as follows:
Assume three companies X, Y and Z
X - The company,
y - The customer
Z - Vendor
When ever X gets a PO from Y to supply some goods, X has an option of either manufacturing those goods or procuring those goods.
If he is procuring the goods, there are two methods that are generally followed:
Method 1) After receiving the PO from Y, X creates a sales order against Y.
Now at the same time he also creates a PO to a vendor Z to produce the goods
Z produces the goods and supplies to X
X receives the goods from Z
Then X delivers the same goods to Y.
After that X invoices Y and Z invoices X.
Note : Here there is no direct/ Indirect relation between Z and Y.
This process is known as Trading Process. and the Material here is created with Material type HAWA.
The other method is a Third party order processing method:
Here the glaring difference is that instead of Z supplying the material to X and X in turn supplying the same material to Y.
X authorizes Z to supply the material to Y on his behalf and notify him once the delivery is complete.
Now Z supplies the material to Y and acknowledges the same to X.
Z will send a copy of delivery acknowledgement and invoice to X.
After receiving the delivery confirmation and invoice from Z, X has to verify the invoice and this process is known as invoice verification and is done in SAP through Tcode MIRO.
The next step for X is to create an invoice and submit to Y
Only after the invoice verification document is posted then only X can create an invoice for Y.
This is the business flow that is followed for third party order configuration.
There are few steps that have to be configured to enable the system to function as mentioned above.
Step1)
If you are always followwing a third party process for a material then you have to create the material using item category group BANS.
The procument type should be marked as External procurement (F) in MRP 2 view of the material master record.
if you are not always allowing third party order processing then u can create a material master record with item category group as NORM and the procurement type should be marked as ( X) meaning both types of procurment ( in house manufacturing and external procurement).
step 2)
the item category in the order should be manually changed as TAS.
For that you need to confugure the item category determination
ord type + item cat grp + usge + Hiv level = Item cat + Manual item cat
OR + NORM + + = TAN . + TAS
OR + BANS + + = TAS
Step 3)
make sure that during the item category configuration for TAS you need to mark relevnat for billing indicator as F
step 4)
The schedule line cateogry for this type should be CS.
make sure that you mark subsequent type as NB - purchase requisition in this schedule line category as this will trigger the purchase requision order immediately after the creation of the sales order and the PO to vendor is created against this purchase requiesion.
Hope it helps
Mastan

Third party cables blocked?

I got some third party USB cables for charging my iphone 5s, so I could charge it at work and in the car without unplugging the home one every time.
They worked fine...until they didn't. I've been seeing online many people who claim you can just doa workaround, but that's not working for me. Every cable I plug in does absolutely nothing now. I used to get the warnings and now I get nothing, and the little lightning bolt icon doesn't show up. The official cable seems to work just fine.
I borrowed these cables from a friend, who has an iPad Air and an iPhone 5s and she's had no problems with these cables. Why would mine be different?
So, plain and simple, is Apple really going out of their way to block these cables from working? I would love to buy official cables, but at $40 each? That's disgusting.
What are my options?

Some third party cables don't meet the specs Apple is designed to require. If you want to use them that is your decision. No one is forcing you to buy Apple but you do need to buy those which meet specs if you want them to work with Apple products. Many of the reputable third party vendors do meet those specs.
I am quite confident that anything selling for 10% of the Apple price fails to meet specs. But it you want to keep going with you can. Just you are not going to get any sympathy here.
Allan

Third Party Cables

Have apple block Third Party Cables from working with ios 8?

I have one third party cable that will still charge an iPhone 5 running iOS 7, but will not charge an iPhone 5 running iOS 8 giving the message about "unsupported device..." The interesting thing is that if I plug that same cable into my iPad Air or iPhone 6, both running iOS 8, neither of those even acknowledge that a cable is connected. There is a software component, and a hardware component. I just gave the cable to someone who has an iPhone 5 running iOS 7 and everyone is happy for now...

Did latest iPhone update and now non of my third party apps work. They open then close immediately. I tried to restore but can't as my iphone wont sync with itunes now and I will loose my apps. Also my largest app "Sat Nav" has gone. Help ??

Hi All
I have run into problems with my iPhone 4. I hadn't done an update for a while so decided to get my itunes and iphone 4 up to date. I downloaded all the latest versions. However now non of my third party apps work and my largest one has vanished. I try and open them and they flash up and then close again. I thought the easiest thing to do was to restore so I tried to syn my apps onto itunes so I wouldn't loose them. However it won't let me sync the apps onto iTunes. It ill allow me to syn the old version when I just started but since then I have bought a dozen other apps. Can anyone help. thanks

Well this won't work for me...
I had all of my apps and music stored in iTunes, I updated to the newest 9.2 iTunes and did a 4.0 update to my iPhone 3G all the while not noticing that EVERYTHING IN iTUNES was GONE. When I got done updating my iPhone it was late so i went to bed... Next day came back to sync everything and thats when I saw it was all gone...
http://support.apple.com/kb/HT1451
did what the link said and NOW I have all my 6K+ MUSIC back but not ONE APP. The App's are completely gone from when you nav. to the location the link says... There isn't a mobile sync folder there...
NOT SURE WHAT TO DO NEXT... Very Frustrated and MAD. I don't want to redownload all my apps manually. TO many to do it that way.

How to use third party package in java application

hi, i am a student , new to java world can any of u tell me how to import third party package in our java application.
i want to know how CLI is done in java.
i am going thru this link http://www.codezoo.com/pub/component/5574
not able to get anything.
please please help me

There are two steps -
1. Import the classes you need from the package(s) using the Java import statement in your classes that need access to them.
2. include the 3rd part code (one or more .jar files and/or root directories holding the code's package tree and .class files) to your javac and java class path and optionaly to the class path found in your .jar's manifest file.

How to use Third Party DLL in Adobe Illustrator Plug In

Hi Everyone,
I want to design plug-in for Adobe illustrator CS6(64 bit). As first step I am referring sample plug ins from ../SDK/SampleCode. I am not getting how to use third party DLL in plug in.
Please let me know how to refer C# DLL in illustrator plug in.
Thanks in advance.

There's no C# API for the Illustrator SDK, so your plugin must be C++ at the very least. That said, you can probably write a bridge if you need to call out to a C# library/DLL.

How to make a Button to work Actively even if there is a mandatory field..?

Hi All..
How to make a Button to work Actively even if there is a mandatory field to be fulfilled..???
I am badly in need of this logic, as i have to incorporate in my code..
Points will be rewarded without fail..

Hi Pavan,
I also faced the same requirement. U can do one thing like remove the obligatory keyword of that parameter/select-option. U can handle the same using the program in at selection-screen event. See this sample of code,
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_land1 for T005-LAND1 <b>[Needs to be mandatory]</b>                 no intervals no-extension.
SELECT-OPTIONS: s_panid FOR zoindex_val-zopanid.
SELECT-OPTIONS: s_effdat FOR zoexchrate-zedate.
SELECTION-SCREEN END OF BLOCK b2.
*-- AT SELECTION-SCREEN
AT SELECTION-SCREEN.
CASE sscrfields-ucomm.
*-- Obligatory Country Code
IF s_land1[] IS INITIAL.
    MESSAGE e050 WITH text-050.
                 "Please select the Country Code
ENDIF.
So whenever u do F8/Enter other than that push button, it will prompt u to enter the country code first then only u can proceed.
Hope this would help u in some way. Please do reward the helpful answers.

How to install third party plug-ins from photoshop elements 11 to new 13 in my PC win7?

how to install third party plug-ins from photoshop elements 11 to new 13 in my PC win7?
Thank you.

Hi ,
Your windows is 32 bit or 64 bit .
If win 7 32 bit
Just copy the plugin from PSE 11 and paste it to PSE 13 plug-in folder.
If win 7 64
PSE 11 and PSE 13 are installed as a 32 and 64 bit respectively , so you need to install plug-in again.
Thanks,

How to make material availability check work during Work Order creation

Hi Experts,
Kindly advice about these matters:
1. How to make material availability check work during Work Order creation?
My requirement is Work Order can not be created when it has missing parts. I have set the config to '3' can not created when is has missing parts, but it still does not work.
I have implemented SAP Notes 1148139 on my system (SAP ECC 6 Ehp 5) also, but still does not have any effect.
I must not set the config Res./Purch Doc creation to 'immediately', because it does not fit to my user requirement. Is there anyone knows how to solve this requirement?
2. How to make information message/ Availability check screen appear when sparepart is missing, without clicking Availability Check button? for example: appear when clicking Save button.
Thank you
-amoonra-

Hi Maheswaran,
I have implement the prerequisite notes. (Notes 790219 and 1034962). Do you know why it is still does not work?
Thanks
-amoonra-

How to make third party cables work on iphone?

Similar Messages

Maybe you are looking for