How to make timecode track in transcoded file match original

Using Compressor 4.1.3, when I make an H264 QT from a DNX36 QT, the timecode track does not replicate properly.  The first frame of timecode repeats for a frame which makes every frame after that read as one frame earlier than it is in the original file.
For example, the first frame of the original file is 01:00:00:00.  In the H264, the 1st and 2nd frames are 01:00:00:00, and the 3rd frame is 01:00:00:01.  The 3rd frame should be 01:00:00:02.
The DNX36 is a QT Reference movie exported from Avid MC 7.0.4.1.  I am reading the timecode on the QuickTimes using QuickTime Player 7.6.6. This works correctly with Mac OS 10.7.5 and Compressor 3.5.3.
The system I'm having the trouble on is Mac OS 10.9.4, Compressor 4.1.3
Any ideas on how to make the timecode track of the transcoded file match the original?
Thanks.

I'm not sure what you are getting at. Is a string child the contents of a node treated as text?
If you are trying to match a child node regardless of case I doubt this is possible as the XML standard says an XML document is case sensitive so if your parser ignored case it would not be XML complient.
Hope this helps.

Similar Messages

  • How to make Finder NOT to show files from a specific folder in "All My Files"?

    Hello!
    Can someone please advice how to make finder NOT to show files from a specific folder in "All My Files"? See the attach - I recently installed Civilization 5 from Steam and now I have a lot of unneeded files (*.log and *.ini) shown in  All My Files colder in Finder.
    I don't want to see them. Any advise?

    Using "All my Files" was very handy before all this rubbish popped up. =(

  • How to make Visitor Tracking in embedded Tomcat.

    Hi, Please help me.
    I want to know how to make visitor tracking in embedded Tomcat. If you know, how to catch all the incoming clients to Tomcat, please tell me. I don't know how to catch them.

    enable logging on the server

  • How to make mplayer play 3gp type files ??

    how to make mplayer play 3gp type files ??
    I downloaded a Japanese blue movie by amule, but I cannot play it!

    Army wrote:Actually, a few weeks ago, opencore-amr went into [extra] and ffmpeg and mplayer are being compiled against it, so Arch's mplayer should support 3gp files ootb including audio. Video playback was never an issue, because 3gp is just a container, the video codec is usually h263 or h264, which are no problem for mplayer.
    Very new versions of FFmpeg have native amr-nb support. I'm not sure if it happened before or after the most recent FFmpeg bump in the repos.

  • How to make photoshop cs4 open dng files?

    How to make photoshop cs4 open dng files?

    They are opened by Photoshop through the ACR plug-in you should make sure the ACR 5.7 update is installed for your CS4.
    Adobe - Photoshop : For Macintosh
    Adobe - Photoshop : For Windows

  • How to replace audio track in mpg file (3,4 Gb) by mp3 fies?

    How to replace audio track in mpg file (3,4 Gb) by mp3 fies? Without loosing video quality?

    I've never used muxers under Linux, but you can try mpegdemux.
    Take a look at Elecard Xmuxer Pro, for example – but that costs $$$. Look here and you may find a good, free Windows-based tool.

  • I just got logic and need help i dont know how to make a track at all

    i just got logic and need help i dont know how to make a track at all

    Pancenter wrote:
    There was a time not too long ago when people respected the incredible amount of talent that contributed to this software...Everyone -wanted- to learn about the craft and "art" that goes into being a good engineer, musician, producer...etc.      
    Beginner's did enough reading and experimentation to at the very least, ask an intelligent question.
    pancenter-
    Hey Pancenter there are still lots of us about.
    I wouldn't take the original post too seriously - I may of course be naive but it sounds like it could be a troll to me!
    I learn a lot from reading the posts of the likes of you, Erik, Bee Jay, sampleconstruct, noeqplease etc so I hope you guys don't become too dispondent when you see posts like these.
    By the same token, I hope the Logic team continue to use their talents to develop powerful software that caters for the professional user, while allowing Garageband to continue to do its (excellent) job of providing for its market.

  • How to make a short clip out of the original one ?

    Some days ago, I asked a question on editing a clip in this forum. The responder asked me to provide a few seconds of the clip for his examination. But I got stuck. I didn't know how to make a clip of a few seconds out of the original clip and that it had the exact same format and properties as the original clip.
    Neither Premier nor After Effect have an ouput option such as "same as original source" .
    So, my question is how to make a short clip out of the original one with everything the same properties as the original one.
    Thanks in advance.

    May be I haven't made myself clear
    Sorry, but I think that I am still not following you.
    I want to export and render the short clip to a new file which I want to have everything the same as the original clip. Just like I cut off a few seconds off it and that few seconds becomes an independent file.
    OK, you have your original source file. It is complete and is also unaltered. If you want a "Copy" of it, just use Windows Explorer, or similar to make that Copy. If you want a separate file of your edited version of that source file (as it appears in the Timeline), use the WAB (Work Area Bar) to include just that edited instance of the source footage, and Export just the WAB. This will give you a separate file with the edits in it.
    I still feel that neither is what you want. If you can step me through, maybe with screen-caps, what you have and what you wish to end up with, I can see the operation more clearly.
    Good luck,
    Hunt

  • How to make Different Tracks in a Recording

    HI there ...
    I'm just starting to make my way around GarageBand ...
    I have to do a recording tomorrow ... its an audition for a pianist. He's going to have to play some solos, scales etc ... all told it will be about an hour and a half of recording or more ...
    What I need to know is ..... Every part of the audition has to end up as a different track on the cd I make of it. For example the ten scales has to play would each be a track number ... his solo piece another number and so on.
    How do I mark tracks on the recording? Also ... if I set up the recording and just press record every time he plays ..... am I going to have enough space in the one project to record everything? I thought I read somewhere that garageband has a limit on the number of bars that it can record.
    Thanks so much for any help .......

    I just looked at Amadeus Pro on the web .... Does it do recording too?
    Yes
    How many tracks can it do ....
    I don't think it's actually specified, but lots. (Actually I don't think this is what you are talkin aboujt, it can do numerous simultaneous tracks for mixing down: but yes, you can split a single recording into separate ones.)
    If I record on GarageBand ... can I use Amadeus to
    edit the GarageBand file? ...
    Yes - first export to iTunes then drag the file from iTunes to the desktop and then drag that to the Amadeus Pro icon in the dock.
    .... Cut sections out ... Mark tracks .... and burn a
    CD? ....
    Yes, yes and yes. The program is still in beta and I haven't actually tried the CD burning facility, but in any case you can burn audio CDs from iTunes.

  • How to export all tracks into audio files with the same duration

    Hi everybody.
    I am trying to export all the tracks into different audio files.
    It's 10 soft. instruments and an audio track. I tried with "File>Export>All Tracks as Audio File but the result is 11 audio files with different lengths. As the song is 3 minutes and 20 seconds I would like every single track to be 3.22 sec long.
    How do I do it? In fact, each track is composed not only by played instruments but also by moments of silence.
    Thanks!!
    Alessandro

    sambino wrote:
    I tried with "File>Export>All Tracks as Audio File but the result is 11 audio files with different lengths. As the song is 3 minutes and 20 seconds I would like every single track to be 3.22 sec long.
    The files are different lengths because each instrument does not stop playing at the same moment. It would accomplish nothing other than waste disk space if Logic appended silence to the end of each file in order to make each track the same length. The different lengths you see mean nothing because the absence of appended silence means nothing.
    each track is composed not only by played instruments but also by moments of silence.
    Naturally. And that silence is accounted for in your exported files, when the silence appears at the beginning of the track, and when it appears during the track. It just isn't appended at the end because that would be pointless. Consider this project, consisting of four tracks:
    When I use the command File > Export > All Tracks as Audio Files, Logic will produce four files that look like this:
    The files are not equal in length, which is perfectly fine. What's important is that they all start at bar 1, and will align properly when imported into some other program. So all you need is the command you already used: File > Export > All Tracks as Audio Files. In one step, it will produce all the files you need, and it will produce them correctly.
    By using Bounce, you would be gaining nothing except extra work, because you would have to do it separately for each file you wanted to produce. With Export > All Tracks as Audio Files, you get all your files with just one command.
    iSchwartz wrote:
    exporting tracks means that any panning or automation will not be rendered. So if you want the engineer to put up all of your tracks at unity gain (all faders at zero) and have your tracks & stems reproduce the mix you're hearing at your studio, use bounce, not export.
    If you want to have your tracks & stems reproduce the mix you're hearing at your studio, there's no need to go to the extra effort of using Bounce instead of Export. You only need to enable (in the Export dialog) the checkbox "Include Volume/Pan Automation." This is explained on p. 1022. When you do this, any panning or automation will indeed be rendered.

  • How to "Export All Tracks as Audio Files" in Pro Tools?

    I have a Pro Tools session that I want to mix in Logic. So I need to bounce all tracks as audio files like Logic's "Export All Tracks as Audio Files" command. Does anyone know if this is possible in PT, or do I need to bounce one track at a time (in realtime!)?

    Sorry, but the previous answers are not quite correct. Consolidate tracks will only merge all your edits and fades and make a new audio file out of it. It wont consolidate any automation or insert effects. The same is true for exporting audio from the regions pane. Therefore you still have to perform a "bounce to disk" in order to consolidate properly. So no it doesn't have the "Export All Tracks as Audio Files" option......
    Christian,
    When "exporting" from one DAW to another, it's generally understood that automation and plug-ins will not be included.
    Exporting from Pro Tools does indeed bounce the files to disk. We aren't talking about a stereo mix here. We're talking about exporting all the individual tracks. Are have I misunderstood you?
    .... which leads me on to this question. How long has logic had the "Export All..." function as I have been performing "track lays" (i.e. getting my logic stuff ready for a pro-tools mix) for films that can often take days to perform and am embarrassed to stumble across this option on this forum as I fear I may have cost myself several weeks of my life working the long way round!!!
    "Export All tracks as Audio Files" was introduced in version 7.0.
    Don't feel too ashamed though. I have a good friend, who has been using Logic daily as long as I have (8 years or so now), who only 3 months ago, saw me utilizing that feature, and his jaw dropped. He too, had been wasting "weeks" of his life, doing it the way you have been doing it. : )
    You're gonna absolutely LOVE using that feature from this day forward...!

  • How to make English and Chinese pdf files searchable?

    I have scanned many A4 English and Chinese print-outs into pdf format.  How to make these files searchable ? People mention about the OCR issue. Will the installation of Adobe make life easy and manageable?

    I know Acrobat does Japanese OCR very well; I can only assume that it works for Chinese as well.
    P.S. I just checked: Chinese (Simplified) and Chinese (Traditional) are both language selection options for OCR.

  • How to make Folder Action work on file, subfolder content change?

    Hi!
    I looking for information in how to make a Folder Action, Work Flow or any action from Automator to work on file change and not only on deletion, moving or insertion. What I want to know is if it's possible to trigger some script or app while monitoring a folder and its contents, files and subfolders, changes. Meaning that when I have a file that has its contents updated the action will be triggered like an txt file that I only insert a new line in it, for example.
    Is there any solution that is not third party? Is there an internal Mac OS X solution that would work on Snow Leopard, Lion and Mountain Lion?

    i have same problem. i would like to move automatically saved Word backup copy to another folder, but the folder action doesn't recognize the save as a new file that needs to be acted upon.

  • How to make the active save-to-file with the data from GPIB ?

    Hello,,everybody !!
    I want to make the active save-to-file with the data from GPIB since starting the measurement. To save-to-file at the end of measurment is somehow risky for losing the data because my measurment have to take for long time (eg. 24-48 hours).
    Thank you in advance for anybody's help !!

    Thanks Dennis,
    I have already append, I got it but still have one small problem that between each line it has the blank line. Example as below ,
    16:40:33 54.24
    16:40:34 54.23
    16:40:35 54.24
    I want to get rid of the blank line in between.. Do you have the idea about it ?

  • How to make my waveform from excel file perodic in labview graph

    Hi guys,
    Previously I've made a vi which integrates the excel file, to plot the graph values in labview using the values in the excel file to give the me a better flexibility to decide what waveform i want it to be. Can i know how to actually make the graph periodic, as in the waveform repeats,  because currently it can just plot out the waveform accordingly to the values i inserted in the excel. I've attached my vi and aso my csv file together. Thanks guy.
    Attachments:
    12.csv ‏1 KB
    graph.vi ‏18 KB

    So do you want to read the same values over again?
    If that is what you wish to achieve then use waveform chart as opposed to waveform graph. I editted your code slightly so that you can see the different.
    I hope this helps!
    Mehak D.
    Attachments:
    graph.vi ‏18 KB

Maybe you are looking for

  • Pull data from a table in HTML format from external URL into a Servlet

    How do I pull data from existing website html table into a Servlet? I will need to pull the data into a servlet. So, the servelet will need to go to the URL and get the data and save them as variables. I know I will need an array to store the data. I

  • Hyperlink in a Form to external spreadsheet

    Hello, I need some help trying to link an excel page to a livecycle form.  I would like to know how to add a hyperlink or a button so that when pressed, it would direct the user to that spreadsheet of information.  Once there,  if the user is done lo

  • Installing Reader 8.1.2 without an internet connection

    Hi, my personal computer in my room isn't hooked up to my internet connection, so I copied the Adobe Reader file onto a flash drive and copied the file to the other computer. When I try to install it, the installation closes after the initial 0-100%

  • Problems with M-Audio Keystation Pro 88

    Hello everyone, I am using a M-Audio keyboard as my controller keyboard in Logic 7.2. I have assigned certain instruments from Logic to differnet zones on the M-Audio. I have done this for four songs hence i have used 4 of the presets on the M-Audio.

  • Can I get the 6.04 version of garageband?

    I just bought a new Macbook Pro and the garageband system (10) is entirely different from that on my old Mac (6). I really miss the old version, I believe this one misses a lot of features. Is there any way to get the old version?