How to mange TDS in SAP B1

Hi Experts,
Please tell me how I mange TDS in SAP B1 and also tell me the steps.

hi Naveen
first tell me which versio u are using if its 2007 B then u may use the Addon on provided fot TDS by citi xsys if u are using 8.8 Then it comes along with the package first u would require to set up the TDS
go to admin-setup-finace-tds
1 First define the financial year master
2. then define the TDS section as applicable by your business neeeds
3 nature of Ascess and certiface series needs to be designed
then under admin-setup-finacial-GL Account dtermination- purchasing TAB
CHECK ON WITHOLDING TAX option
then under business partner master data go to accounting-tax-check on subject to witholding TAX then add teh TAX codes Applicable
under item master data check the option for witholding tax
then while making the Invoice places the Wtax AS YES and the system woul calculate teh value on teh basis of the percentage defined
Regard
Manish

Similar Messages

How to handle TDS for Contractor under Section 94C in SAP B1 9.0

Hi Expert
If the credit or the payment (One time Payment) in pursuance of the contract does not exceed Rs.30,000/-, no deduction has to be made at source. However , if the aggregate of all amounts paid/credited or likely to be paid/credited exceeds Rs. 75,000/- then tax at source is to be deducted.
how to manage this in SAP B1 with single WTax code??
regards,
Raviraj

HI Raviraj,
Have you checked the same by setting the threshold as 75000? You may not be able to deduct TDS at the the time of payment but you can use DP Invoice for the same.
Try this, it should work.
Thanks,
Joseph

How to deduct tds on advance payment IN SAP

How to deduct tds on advance payment to vendors.

Hi Kishore,
You need to define the Extended Withholding Tax type based on payment. Assign WHT code to WHT type and complete the relevant configuration. Below link will help you to config WHT in SAP.
http://help.sap.com/saphelp_470/helpdata/en/e5/0781474acd11d182b90000e829fbfe/content.htm
Assign WHT type and code in vendor master data.
Standard SAP will start deducting WHT on downpayment.
Hope it helps.
Thanks,
Deepanshu

How to generate TDS certifcate and CHallan forms

Hello All,
How to generate TDS cerficates and challan forms for Pakistan withholding tax in ECC system,
Regards,
Ramana

Hi,
Check whether you have activated Withholding tax for your company code and country. Each country has
its own versions like India has Country India Version. Check with SAP the version for Pakistan whether
there is any country specific functionality. Ofcourse, you can use the other versions if the same
parameters suits the tax classification if your country.
Regards,
Sadashivan

How to do this in SAP SD

Companies
1. TATA
2. Godrej
A customer went to godrej web site or called and ordered a refrigirator. wat godrej do here is send that order to TATA .
TATA going to deliver the order to customer. and also TATA going to invoice the customer on behalf of Godrej. means invoice shows godrej logo and customer name and payment information.
when customer see the invoice he feels like the invoice and order(refrigirator) camefrom directly from Godrej.
But Invoice and order delivering done by TATA. and TATA also collects the Payments.
TATA and Godrej look their books quarterly basis.
TATA giving services like this.
This is only example.this is happening in real time in other companies.
Please find me a solution
How to do this in SAP SD.

HI,
You can use Third Party process as pointed out by Srinivas.
Blewo are the links that will help you in 3rd party process...
http://help.sap.com/saphelp_46c/helpdata/en/e6/4a78e39e0311d189b70000e829fbbd/content.htm
http://www.sap-img.com/sap-sd/process-flow-for-3rd-party-sales.htm
let us know.
Regards,
SB

How to extract data from SAP in FDM 11121

I came across some documents from version 11113, says there is a SAP adapter, however ,when I check 11121 there's no such adapter, does anyone know how to extract data from SAP in FDM 11121?

I download a package from Bristlecone, but I dont see any xml files in it, just a bunch of dll and I didn't find any instructions on how to set up/configure in FDM, it just explained how to register in SAP app server and client.
Hyperion 11113 has readme on sap adapter(Hyperion Readme Template), but I cannot find the same readme file in 11121, all I can find is ERP Integration Adapter document. any idears where I can find at least a readme document?

How to find out Which SAP programs are affecting Which Z programs?

Do we have a program/tool that can tell us the following:
How to find out Which SAP programs are affecting Which Z programs in the entire development server?
We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other?   I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level.
We need are looking for something a little larger u2013
thanks in advance
Vishnu

Do we have a program/tool that can tell us the following:
How to find out Which SAP programs are affecting Which Z programs in the entire development server?
We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other?   I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level.
We need are looking for something a little larger u2013
thanks in advance
Vishnu

How to assign modified forms (SAP scripts etc.,) to Dunning texts

Hello, how do I assign forms (SAP scripts etc.,) to dunning texts according to no 5 above?
I've copied the form f150_dunn_01 and modified it. Now I want to assign my modified form to dunning text. In txn fbmp I have created new procedure and when I clicked on Dunning texts it takes me to dunning text screen where I should be able to assign my modified form. But the screen is greyed out and not editable. Is there anything I'm missing or I've permission issue?
Please help
Regards
Naz
Most of the config for Dunning is done with TCode FBMP.
Key Steps are :-
1.     Define the dunning procedure or use the standard
2.     Define the dunning levels (desired stages of reminder)
3.     Define the dunning interval (frequency of reminder)
4.     Line item grace periods & Min.days in arrears (acct) govern the criteria for picking items to be dunned along with Minimum amounts
5.     Assign forms (SAP scritps etc.,) to dunning texts. Forms contain the contents of the reminder notice and the format of notice.
6.     You can include the Sp GL Transactions as well.
7.     Customer/Vendor Master Records needs to be updated with the Dunning
8.     Procedure etc, Dunning tab in the master data
9.     Use F150 to run.

Hi Praveen,
Ok let me go through the steps that I have done so for.
1. New dunning procedure 004 been created in Txn FBMP
2. Then by choosing the assigned dunning procedure 004, trying to update the form by selecting the company code and then Dunning text. But the screen is grayed out.
Please pass me your email address then I will send you the screen shoots.
Thanks
Naz

How to Pull data from sap r/3 tables to oracle tables

how to fetch data from sap r/3 tables & data pulled to oracle table .
GIVE THE APPROPRITE ANSWER FOR THIS.
THANKS IN ADVANCE.
If it is useful for me , i am giving point.
regards ,
Navita
Edited by: NAVITA YADAV on Mar 7, 2008 2:07 PM
Edited by: NAVITA YADAV on Mar 7, 2008 2:08 PM

You need to perform some native SQL to fetch data. Before doing this connection must be exists b/w your R/3 and Oracle server.
Basis team will help you to have connection.
Check the connection name in the table DBCON.
Check the below code to handle native SQL.
SELECT SINGLE DBMS
           FROM DBCON
           INTO DBTYPE
           WHERE CON_NAME = DBS.
IF DBTYPE = 'ORA'.
    TRY.
      EXEC SQL.
        CONNECT TO :dbs
      ENDEXEC.
ERROR Handling for Native SQL *************
      IF SY-SUBRC <> 0.
        MESSAGE `Docusphere connection failed.` TYPE 'I'.
        EXIT.
      ENDIF.
EXEC SQL PERFORMING loop_output.
    OPEN C1 FOR
    SELECT UK1, UK7, uk6, uk9, uk22, uk23, uk25    "field names of Oracle table
    FROM IIS_DOCS_AP10D
    WHERE ( UK2 = 'ZFIINVOICE' OR UK2 = 'ZFIPAYREQ' )    AND
    UK19 = 'E'                                           AND
    UK20 IS NULL
ENDEXEC.
      DO.
        CLEAR W_OUTPUT.
        EXEC SQL.
          FETCH NEXT C1 into :wa1-arc_doc_id, :wa1-bukrs, :wa1-belnr, :wa1-gjahr, :wa1-wi_id, :wa1-ARCH_METHOD, :wa1-barcd.
        ENDEXEC.
enddo.
Reward points if helpful.................

How to deliver items in SAP R/3 using sap gui

Hi all,
I have created an order.I want to deliver the items contained in it. pls tell me how to do it using sap gui.
Regards,
Kiran.

Hi Anil
You can create a normal ABAP report to delete or modify records from database table.
You can use statements such as delete or modify for this purpose.
First select the records from table bring them into internal table and use that table to delete the records from database.
Note: If you are trying to delete records from Z tables then this approch can be adopted but if you are dealing with Standard tables it`s not a option to directly delte the reocrds from database table .
For that purpose you can use BDC or any othe available FM/BAPI.
Note :When you are deleting records from the database table please use locking function module to lock the database entries.
Regards
Neha

How to give connection between sap R/3 to sap BI 7.0 system

how to give connection between sap R/3 to sap BI 7.0 system

Hello,
Check this links:
http://help.sap.com/bp_biv135/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
You can look at:
OSS Note 184971 'Notes on BW source system connections' and http://help.sap.com/saphelp_nw04/helpdata/en/80/1a61e5e07211d2acb80000e829fbfe/content.htm
You can use this best practice connectivity guide for connecting BW to any SAP source system . It explains step by step procedure to connect the source systems to BW.
http://help.sap.com/bp_biv135/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
http://help.sap.com/saphelp_nw2004s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
http://help.sap.com/bestpractices/crossindustry/businessintelligence/v131/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
check this:
http://wiki.ittoolbox.com//index.php/HOWTO%3ARe%2DConnect%5FR/3%5Fand%5FBW#Type_Transaction_SM59._Maintain_RFC_destinations
Regards,
Jorge Diogo

How to print lables in SAP SCRIPT

Hi all,
Here i have a requirement in SAP Script How to print the lables instead of Hard coding the field Description. Please help me how to do.
Regards
Raghava

Hi
First Create a Lable in script
Refer This link for creation of lable in SAP SCRIPT
How to create lables in SAP SCRIPTS?
Ranga

In solman 4.0 how to send message to SAP through service desk

Dear all,
I have configured service desk functionality, My requirement is from service desk how to send message to SAP.
Regards,
Pavan.

Hi,
Following the steps:
Basic configuration - RFC Connections to SAP
Check if the RFC Connectino SAPOSS is working properly
Check if load distribution group is set to EWA
The RFC Connections:
- SAP-OSS (Send Message to SAP)
- SAP-OSS-LIST-O01 (Update Message from SAP)
will be created automatically by the system with a user which has been assigned
previously.
IMG Path: SAP Web Application Server | SAP Web Application Server | SAP Solution Manager| Basic Settings | SAP Solution Manager System | Connection to SAP | Assign user for forwarding Service Desk Message
With transaction SM59 you can adjust the RFC connections.
- For further information on SAP R/3 Front-end connections, see SAP Notes: 33135, 766505, 24177
- To forward Service Desk notifications and Issues to SAP, you need to assign a user to the SAPNet R/3
Front-end connection to SAP.
Activities:
- 1. From the SAP Solution Manager (transaction SOLUTION_MANAGER), choose (Edit-> Global Settings.
- 2. Choose Display<->Change.
- 3. For SAP Service Marketplace, specify http://service.sap.com as the URL.
- 4. In the Connection to SAP tab, specify SAPOSS as the RFC destination. Note that the entry is casesensitive.
- 5. For User forwading messages, enter a valid user and a password. This user will require all the authorizations for SAPNet R/3 Front-end for your customer number.
- 6. Save your changes.
The system automatically generates the following RFC destinations and assigns the S-User and password you specified: SAP-OSS, SAP-OSS-LIST-O01
Good Lucky!

How we create RFC in SAP R/3

Hi all.
I want to create a iview and when i click on preview or Deploy, it shoud display screen of Transcation SE11.
I think we can do this by creating RFC of transcation(SE11). So Please tell me-
How we create RFC in SAP R/3 for transcation SE11.
I will rewards u points.
Thanks in advance
waiting---
Naresh Kumar

Hi Naresh,
there is better way, you can display an transaction in the portal with an iView. Then use this URL of the transaction, then you can insert a html view with the URL of the transaction.
You can add tabs with different transactions for example.
Best Regards,
Marcel

Urgent ...how to send output of sap through mail

Could you please guide me how to send output of SAP Script through mail in PDF format.
Thanks in Advance....
Regards,
Kumar.

*& Report ZSPOOLTOPDF                                                 *
*& Converts spool request into PDF document and emails it to           *
*& recipicant.                                                         *
*& Execution                                                           *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on      *
*& screen                                                              *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver,
           p_sender LIKE somlreci1-receiver,
               p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
        INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
      wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
      gd_eventparm LIKE tbtcm-eventparm,
      gd_external_program_active LIKE tbtcm-xpgactive,
      gd_jobcount LIKE tbtcm-jobcount,
      gd_jobname LIKE tbtcm-jobname,
      gd_stepcount LIKE tbtcm-stepcount,
      gd_error    TYPE sy-subrc,
      gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject   LIKE sodocchgi1-obj_descr,
      it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      gd_sender_type     LIKE soextreci1-adr_typ,
      gd_attachment_desc TYPE so_obj_nam,
      gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
      gd_destination LIKE rlgrap-filename,
      gd_bytecount LIKE tst01-dsize,
      gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
        INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
           c_no(1)     TYPE c   VALUE ' ',
           c_device(4) TYPE c   VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
    PERFORM get_job_details.
    PERFORM obtain_spool_id.
Alternative way could be to submit another program and store spool
id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
       to sap-spool
       spool parameters   %_print
       archive parameters %_print
       without spool dynpro
       and return.
Get spool id from program called above
IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
    PERFORM convert_spool_to_pdf.
    PERFORM process_email.
    if p_delspl EQ 'X'.
      PERFORM delete_spool.
    endif.
    IF sy-sysid = c_dev.
      wait up to 5 seconds.
      SUBMIT rsconn01 WITH mode   = 'INT'
                      WITH output = 'X'
                      AND RETURN.
    ENDIF.
ELSE.
    SKIP.
    WRITE:/ 'Program must be executed in background in-order for spool',
            'request to be created.'.
ENDIF.
      FORM obtain_spool_id                                          *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
                 INTO TABLE it_tbtcp
                 WHERE      jobname     = gd_jobname
                 AND        jobcount    = gd_jobcount
                 AND        stepcount   = gd_stepcount
                 AND        listident   <> '0000000000'
                 ORDER BY   jobname
                            jobcount
                            stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
    message s004(zdd) with gd_spool_nr.
    gd_spool_nr = wa_tbtcp-listident.
    MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
    MESSAGE s005(zdd).
ENDIF.
ENDFORM.
      FORM get_job_details                                          *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
       IMPORTING
            eventid                 = gd_eventid
            eventparm               = gd_eventparm
            external_program_active = gd_external_program_active
            jobcount                = gd_jobcount
            jobname                 = gd_jobname
            stepcount               = gd_stepcount
       EXCEPTIONS
            no_runtime_info         = 1
            OTHERS                  = 2.
ENDFORM.
      FORM convert_spool_to_pdf                                     *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
       EXPORTING
            src_spoolid              = gd_spool_nr
            no_dialog                = c_no
            dst_device               = c_device
       IMPORTING
            pdf_bytecount            = gd_bytecount
       TABLES
            pdf                      = it_pdf_output
       EXCEPTIONS
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed = 11
            OTHERS                   = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
    TRANSLATE it_pdf_output USING ' ~'.
    CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
    it_mess_att = gd_buffer.
    APPEND it_mess_att.
    SHIFT gd_buffer LEFT BY 255 PLACES.
    IF gd_buffer IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
ENDFORM.
      FORM process_email                                            *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
      FORM send_email                                               *
--> p_email                                                       *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject         = 'Subject'.
gd_attachment_desc = 'Attachname'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod        = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod        = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
    gd_sender_type = space.
ELSE.
    gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                               tables it_mess_bod
                                      it_mess_att
                                using p_email
                                      'Example .xls documnet attachment'
                                      'PDF'
                                      gd_attachment_name
                                      gd_attachment_desc
                                      p_sender
                                      gd_sender_type
                             changing gd_error
                                      gd_reciever.
ENDFORM.
      FORM delete_spool                                             *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
       EXPORTING
            spoolid = ld_spool_nr.
ENDFORM.
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      Send email
FORM send_file_as_email_attachment tables it_message
                                          it_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
data:   t_packing_list like sopcklsti1 occurs 0 with header line,
        t_contents like solisti1 occurs 0 with header line,
        t_receivers like somlreci1 occurs 0 with header line,
        t_attachment like solisti1 occurs 0 with header line,
        t_object_header like solisti1 occurs 0 with header line,
        w_cnt type i,
        w_sent_all(1) type c,
        w_doc_data like sodocchgi1.
ld_email   = p_email.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name   = ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
regards,
venkat

How to mange TDS in SAP B1

Similar Messages

Maybe you are looking for