How to manually add library to my WL domain using admin console?

Hello All,
In need to manually add the JSF2:0 shared library into my
domain using the admin console. How can I do that?
Should I go to Admin Console -> Deployments -> Install -> Upload (from my desktop) -> now how do I tell where this should be installed in weblogic?
Thanks,

this link http://download.oracle.com/docs/cd/E21764_01/apirefs.1111/e13952/taskhelp/library/DeployLibrary.html shows the steps involved

Similar Messages

  • I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
    In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

  • How does one add tables to an existing universe using COM designer SDK.

    Morning All
    How does one add tables to an existing universe using COM designer SDK. I have tried:
    objUniverse.Tables.Add (strTable_Name)
    but get "Cannot create Table" error.
    Any ideas?
    Thanks in advance.
    Anita

    Hi Anita,
    -Use the Add method to add classes and objects to an existing universe using a VB 6 application.
    Adding a Class
    Definition: Function Add(Name As String) As Class
    Syntax: NameOfClassesVariable.Add
    Adding an Object Instance
    Definition:  Function Add(Name As String, [ClassName As String]) As Object
    Syntax: NameOfObjectsVariable.Add(name, [class])
    - name is the name of the object.
    - class is the name of the class containing the object. This parameter should be used in cases where more than one objects exist with the same name.
    Sample Visual Basic 6 Code
    Dim DesApp As Designer.Application
    'MODIFY AND EXPORT CLASSES AND OBJECTS OF AN EXISTING UNIVERSE
    Sub modify_and_export_universe()
    Dim DesUnv As Designer.Universe
    Dim DesCls As Designer.Class
    Dim DesObj As Designer.Object
    Dim DesDBCol As Designer.DBColumn
    Dim DBColName As String
    Set DesApp = New Designer.Application
    'Login to designer
    Call DesApp.LogonDialog
    'Make sure to log on with your administrator profile
    'e.g : "hostname","username", "password","Enterprise"
    'Make Designer application visible
    DesApp.Visible = True
    'This line disable warning messages from Designer
    DesApp.Interactive = False
    'to Open  locally  the universe you want to modify
    'Set DesUnv = DesApp.Universes.Open("club_uni")
    'Use OpenFromEnterprise method (Universes Class) to import a universe from the repository and opens it
    Set DesUnv = DesApp.Universes.OpenFromEnterprise("Universes", "club_uni", False)
    'Add a valid connection which already exists
    DesUnv.Connection = "club"
    'open the universe
    'Call DesApp.Universes.Open("club_universe")
    'Add the table Account and refresh the view in the main window
    Set DesTab = DesUnv.DBTables.Item("Customer").Insert
    DesUnv.ArrangeTables
    'Add a class
    Set DesCls = DesUnv.Classes.Add("Class MyCustomer")
    'Looping through all the fields of the DB Table Account
    For Each DesDBCol In DesUnv.DBTables.Item("Customer").DBColumns
    'Store name of the column
        DBColName = DesDBCol.Name 
         'Add an object to the class
        Set DesObj = DesCls.Objects.Add("Obj " & DBColName)
         'Affect a field to the object
        DesObj.Select = "Customer" & "." & DBColName
    Next
    'Save the existing universe with the same name club_uni or you can change
    DesUnv.SaveAs "club_uni"
    MsgBox "Universe created and saved Class MyCustomer has been added!!"
    'Close the universe
    UnvFullName = DesUnv.FullName
    MsgBox "The UniverseFilePath is " & UnvFullName
    'Close the universe
    DesUnv.Close
    'This line disable warning messages from Designer
    DesApp.Interactive = False
    'Export the universe to the CMS DB (to the last universe folder)
    'Make sure you save the universe before exporting it
    Call DesApp.Universes.Export("Universes", UnvFullName)
    MsgBox "This document has been exported successfully !!"
    'Close designer
    DesApp.Quit
    Set DesApp = Nothing
    End Sub
    Hope this helps.
    Regards,
    Deepti Bajpai

  • How to manually add music from your library

    I'm attempting to manually add an album in my library onto my iphone library, but it won't let me.
    On the phone summary it only has "Manually manage videos" and not music, and on the Music tab it only allows me to add voice memos.
    Can anyone suggest what I'm doing wrong?

    Did you follow the steps in this article?
    Managing content manually on iPhone, iPad, and iPod
    Also make sure that no restrictions are set in Settings/General/Restrictions.

  • How to manually add music

    I want to add music manually from my mac. however when i try to set it up to do that, it wipes my itouch music out completely and have to do a complete re-sync for music from the Library. Isn't there some way to sync it and only add new music that i have added?
    Also, how do only add certain tracks on the albums that I have added to library. thanks in advance to help!

    I just use the manually manage music selection. I don't ever sync music because my music library would be huge and I constantly add and delete music.

  • How to manually add second detail on master detail page

    Hi,
    Apex 4.1
    can anyone tell me which steps to take excactly to manually create a second detail region on a master-detail form ?
    So far I've copied the first detail region and customized it to the second detail table. Copied the processes and adjusted them.
    What happends now is whenever I push one of the 2 "add row" buttons the rows are always added to the last region shown on the page. (also if I try to change anything on the data on the form and submit it all kind of errors show up )
    It seems like the javascript:addrows() does not work for the region it's defined in, but how to adjust this ??
    If I'm forgetting any other steps please also let me know.
    Found multiple threads on this but so far no explanation on how to manually do this.
    Cheers
    Bas

    Bas,
    Multiple tabular forms or detail regions on a master-detail form are not yet supported. So you best option would be to make one or both of the detail regions read-only report regions with edit links on each row, which would take you to a detail edit page. Alternatively you could try to manually build two tabular form regions on your page, however you will not be able to use any of the built-in tabular form features then, incl the add-row functionality, the multi-row update processes and declarative validations. So all of this would need to be hand-coded in PL/SQL and JavaScript. We have plans to support multiple tabular form regions out of the box, but we don't yet when this might make it into APEX.
    Regards,
    Marc

  • How to "manually add songs" only

    A few simple steps to manually manage your music in your iTunes so that your manually add songs to your iPod (provided the song amount, i.e. the Gb used, is less than the storage capacity of the touch device used).
    Step 1.
    Create a playlist and drag every song into the playlist you wish to be on your iPod/iTouch/iPhone.
    Step 2.
    Return to the music section in iTunes and press "cmd" and "select" at the same time on one of the 'ticks' to unselect all songs.
    Step 3.
    Return to the playlist and press "cmd" and "select" at the same time on one of the 'ticks' to select all songs in the playlist.
    [Note in doing step 2 followed by step 3, only the songs in the playlist are checked in the music section]
    Step 4.
    Return to the music section and sort by checked songs
    Step 5.
    Select all the checked songs and drag them onto the iPod/iTouch/iPhone.
    Step 6.
    Return to the music section in iTunes and press "cmd" and "select" at the same time on one of the 'ticks' to select all songs.
    [Now what you have is only the songs you want on your device and all the songs will show up in the manually added songs section on your device. Also by reclicking all the music in your iTunes library you avoid the unnecessary complications of songs not playing/transferring while listening to music on your computer]
    A bit time consuming but it works well who like to carefully manage their library.

    Hi Chris,
    I will delete this thread and repost with correct terminology to avoid confusion. Also I will include the rationale behind why you would take this approach so that people can choose to see whether they will benefit from it. I'd have liked this to exist prior so I can manage my music statistics.
    Your way is right also, but is not the only way to do it and is certainly not the correct way for me. You don't "manage" your music your way.
    A few simple steps to manually manage your music in your iTunes so that your manually add songs to your iPod (provided the song amount, i.e. the Gb used, is less than the storage capacity of the touch device used).
    Reason: This is a good approach (not the only approach might I add) if you wish for your playcount to be tracked and a failsafe way of managing your songs individually so you do not need to rely on playlists.
    Step 1.
    Create a playlist and drag every song into the playlist you wish to be on your iPod/iTouch/iPhone.
    Step 2.
    Return to the music section in iTunes and press "cmd" and click on the "touchpad" at the same time on one of the 'ticks' to unselect all songs.
    Step 3.
    Return to the playlist and press press "cmd" and click on the "touchpad" at the same time on one of the 'ticks' to select all songs in the playlist.
    [Note in doing step 2 followed by step 3, only the songs in the playlist are checked in the music section]
    Step 4.
    Return to the music section and sort by checked songs
    Step 5.
    Select all the checked songs and drag them onto the iPod/iTouch/iPhone.
    Step 6.
    Return to the music section in iTunes and press "cmd" and click on the "touchpad" at the same time on one of the 'ticks' to select all songs.
    [Now what you have is only the songs you want on your device and all the songs will show up in the manually added songs section on your device. Also by reclicking all the music in your iTunes library you avoid the unnecessary complications of songs not playing/transferring while listening to music on your computer]
    A bit time consuming but it works well who like to carefully manage their library.

  • How to manually add rows to DataSet ?

    Hi,
    Apologies if I have missed something obvious - but how should
    I manually add rows to an empty dataset ?
    I've seen the setDataFromArray example in the
    samples
    - but I just want to take a value from a form field and add it to
    the dataset.
    Thanks,
    Richard

    I've just answered it myself...
    use this in the head :
    var ds1 = new Spry.Data.DataSet();
    ds1.data=[];
    function addToDS(newItem){
    // Create row id
    var recordID = "ROWID-" + ds1.data.length;
    // Add new record to the dataset
    ds1.data.push({ myItem: newItem, ds_RowID: recordID });
    ds1.loadData();
    Just call addToDS(value of an input field) using an onclick
    event.

  • How to manually add audio book to the ipod

    How do I manually add an audiobook to my ipod?

    First make sure your iPod is set to manually manage by enabling the Manually manage music and videos option from under the iPod's Summary tab.  Once you have done this, you can manually click and drag the audiobook and its tracks over to your iPod from under the Devices section in the lefthand pane of iTunes.
    B-rock

  • How to manually add RAC Resources

    I have been experimenting with RAC on 10gr2 database running on Oracle Enterprise Linux 4.
    I lost the disk that contains the OCR, which was not mirrored. :(
    I reinstalled Clusterware successfully, but when I ran crs_stat -t I see gsd,ons and vip but not the database resources for the two nodes (instances,listener,database service).
    These resources were registered automatically when the DB was created using OUI and selecting cluster installation
    How can I use crs_profile and crs_register to manually add/register these resources?

    user616051 wrote:
    I have been experimenting with RAC on 10gr2 database running on Oracle Enterprise Linux 4.
    I lost the disk that contains the OCR, which was not mirrored. :(
    I reinstalled Clusterware successfully, but when I ran crs_stat -t I see gsd,ons and vip but not the database resources for the two nodes (instances,listener,database service).
    These resources were registered automatically when the DB was created using OUI and selecting cluster installation
    How can I use crs_profile and crs_register to manually add/register these resources?ah ... a promising candidate for a RAC certified expert Certification ;-)
    There is a RAC forum that should help with RAC/clusterware installations : RAC, ASM & Clusterware Installation
    Best to mark question answered here and post in that forum ... rgds - bigdelboy.

  • How to manually add HP C410a Scanner in Mountain Lion?

    I just got a new MBA running Mounta Lion. I'm 100% up to date on Software Update. I've also downloaded and installed the "full featured" HP software for my C410a specifically for Mountain Lion from http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=0&prodSeriesId=4059515&prodNameId=4059651&swEnvOID=4142&swLang =8&mode=2&taskId=135&swItem=mp-111985-1
    My C410a is happily connected to my network with an Ethernet wire. I have other computers, both Windows 7 and OSX 10.7 that can print and scan no problem. My new computer, however, can't seem to find the scanner. It had a hard time finding the device as printer too, but when I was in Print & Scan and I clicked on the plus-symbol, I was able to choose "IP" and enter my devices IPv4 and then OSX finally detected what was going on and gave me the proper options to add my C410a. I did a test page and everything - it all works. I can't seem to find how to add this as a scanner, however. ***?
    Halp me, please! How do I add this network enabled scanner?!?!
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03378792 #N541

    Here's a screenshot that may be relevant:

  • How do I add my apple id to a used iphone that I purchased and activated? it is still under the previous owner's id.

    How do I add my apple id and erase the previous owner's id, when my phone has been activated and ready to use?

    Unless you have the previous owners password you cannot remove the Apple ID.  The previous owner did not correctly prepare that iPhone For sale and needs to remove all information.  If the Activation Lock is not set by turning on Find My Phone in Settings, iCloud, you can go to Settings, General, Reset, Erase All Content and Settings to get rid of it.  If Find My Phone is on, only the previous owner can clear it.

  • HT1937 how i can add the ipad in my acount using the s.n. only

    how i can add the ipad to my acount without connecting it to the pc only using the serial number

    Sorry. The question doesn't make sense.

  • How do i add Linux systems to be monitored using Virtual agent/SNMP in OLT?

    Dear All,
    I need to know the process to add Linux systems to be monitored using Virtual agent and SNMP in OLT ?
    I have added my details to Virtual agent and chosen ssh and all i get is cannot connect
    Appreciate if someone can give me the detailed screenshot by screenshot process.
    Regards
    Praveen

    On 05/13/2010 09:30 AM, Raja Vengala wrote:
    >
    Yes, the problem is with the old packaged PLINK.exe. Downloaded version is working smoothly. Any reason for shipping the old version ??
    From: Mikael Fries
    Sent: Wednesday, May 12, 2010 11:56 PM
    To: Praveen Arora; Drupad Panchal; Matthew Demeusy; Ashish Dave; Raja Vengala
    Subject: RE: OLT Linux system moniting issue
    Praveen
    I have set up LINUX and virtual agent configs a couple of times, and it has worked pretty ok.
    What I found was that you might have to download a newer version of PLINK.exe and put that onto your OLT system.
    (with the packaged version, I also had some communication issues)
    Try to download the lates plink.exe and see if that works…
    (you may want to restart you system after replacing plink.exe)

  • How to manually add songs and playlists to ipod with new version of itunes?

    So I didn't have any problem adding songs to my ipod nano manually until I updated itunes a few minutes ago, and found the settings completely different than previously.  I can no longer just drag songs and playlists to my ipod.  I have "manually manage music" and "enable disk use" selected.  I do not want to sync my whole library to it.  I have more songs in my library than can fit on my ipod.  And I already have my playlists set up how I want them.  Can someone help?  

    go to iphone, then on the page below click the Add To... icon on the top right.
    then its easiest to view them by songs. and then you can drag and drop from them and click Done when finished

Maybe you are looking for

  • IPhone 4 battery dies quickly, won't charge properly and is very hot!

    Hi, my iPhone 4 won't charge properly and the battery drains really fast plus the handset is very hot. Does it need a new battery? It just suddenly started happening yesterday before lunch and hasn't been right since! I haven't done any software upda

  • With itunes 11 I can no longer see Genius in the Sidebar. ?

    Selecting it in General Preferences fails to display it.

  • Adobe Media Encoder not working w/ DVDSP

    I'm doing a test to see if the video quality of a 1920x1080 video file will look better at about 8mb/s coming out of Compressor 4 vs CS5.5 the trouble is, i have an mpa and m2v coming out of Adobe and an ac3 and m2v coming from Compressor. but...and

  • How to include two charts in one web template

    I need to dispaly two charts which are based on same query and on characteristic 1 vs KF's and the other on characteristic 2 vs KF's in one web template. How can this be done? Thanks in advance, Murali.

  • Broken Alias in Time Machine?

    I'm trying to restore a file that was backed up last August via Time Machine.   The file is a Pages document and indicates such when I find it in TM.  However when I go to restore it it won't restore.   If I double click on the file it just shows a b