How to manually edit label

I used report9i wizard to create a tabular paper report using one of the default template. Later, I manually modified the SQL and included one more field in the select statement. I was able to edit the paper layout and replaced one of the fields with the new field that I added using the property inspector. However, I can't find any place to change the label for the new field. I can't use the report wizard for one I have modified the paper layout and for two the change in SQL messed up with the field selection for display in the wizard. Can anyone help? Thanks.

Hi kiran,
Delete the request in the data target--> Catch the request from the monitor> Goto PSA--> Search the base request -> u can see a (psa)icon click on it>it will take u to the records that are in PSA( already the records available there are in edit mode) so, we can edit them,-> choose which record u want to edit> then do edition..(Note:- As all the records available there in edit mode do not select all,it is not possible to edit all at a time... choose one after one..)
Hope This helps, Assing Points if useful,
Cheerz,
<i><b>Aluri</b></i>

Similar Messages

How to manually edit a "Table of Contents"

How do I set a table of contents to display "..." or align in a "nicer way" - either through manual editing or some advanced automatic vodoo.
Right now my TOC looks like this:
Uploaded with plasq's Skitch!
And that's not a good thing.

Here are some links to older TOC question that might answer yours. There are quite a few threads about TOC if you do a search in the forum.
_http://discussions.apple.com/thread.jspa?messageID=11283337_
_http://discussions.apple.com/thread.jspa?messageID=10904870_

Manually Edit An Alias Original File Path?

How do I edit the original path that an alias uses?
I have created an alias to a network volume, but the patch that the alias is using is by share name (/Volumes/Share Name) whereas I want it to use the ip (/192.168.2.5/folder).
However, I can't figure out how to manually edit the alias path. Once upon a time the "Select new original" dialoge box had a "Go to:" line where you could manually enter a path but in 10.4 it is gone).
Any help would be much appreciated.
Message was edited by: Cobber 99

Well, you could do a couple of things. You could place the .afplocs files somewhere in the hard drive (e.g.: /Documents/afploc_folder) and then place aliases to those .afplocs in the doc (just drag them to the Dock from the Finder). You can even assign them custom names and icons through Get Info.
Another option would be save the .afploc file, and then select the original alias you wanted to modify, and assign it the .afploc as new original through Get Info.
Both these methods provide you with a clickable dock icon, that will connect to the volume.
I vaguely remember about a BSD command called mkalias that creatd aliases from the command line rather than from the Finder, but have no details on that. Maybe you should do a little research about it.
Good Luck.

I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone?

I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone? (the check marks are not bolded, does this mean they are not in my library but only on my phone?)

You uncheck the music in your iTunes library on your computer and along with sync only checked songs and videos selected under the Summary selection for your iPhone sync preferences with iTunes, only checked songs in your iTunes library will be transferred to your iPhone or remain on your iPhone and the unchecked songs in your iTunes library that are currently on your iPhone will be removed when syncing.
Or make use of iTunes playlists and choose selected playlists, albums, artists under the Music selection for your iPhone sync preferences with iTunes and select the playlists below that you want transferred to your iPhone.

Hello, How can I edit or delete a custom label in the contacts list on iOS 7.0.3 on iPhone 4S ?

Hello, How can I edit or delete a custom label in the contacts list on iOS 7.0.3 on iPhone 4S ?
i need it so muchhh!

Sort of depend on what you are trying to do precisely. In Edit mode, if you tap on any label, you will be given a list of options, plus an Add Custom Label option near the bottom of the list

How can I edit or delete a custom label in the contacts list on iOS 7 on iPhone 4S ?

How can I edit or delete a custom label in the contacts list on iOS 7 on iPhone 4S ?

Alfre311 wrote:
I've been trying to find a way to do this since I updated to IOS 7, and I've just found the solution/explanation, even tho is a bit heavy to carry out.
IOS 6 creates custom labels and save them giving you the option to delete them.
IOS 7 creates custom labels but don't save them, so there is no need to have the option to delete them.
But here comes the problem, if you have some custom labes saved in you Iphone / Ipad with IOS 6 and you update it to IOS 7, the device will keep those labels saved, but you wont be able to delete them.
I realized this by going to contacts on Icloud. There those labels that I had on my devices weren't there. So simply restoring your device and configuring it as a new one to later sync your Icloud Contacts, will solve the problem.
I know this post is old, but I might just try this with iOS 8. I have outdated custom labels that annoy me, because I still seem them in the list as options. If I get desperate enough, I may try your solution.

How to have concurrent CSV upload and manual edit in APEX on the same table

Hi there,
my users want to have csv upload and manual edit on apex pages functions together...
it means they want to insert the data by csv upload and also have interactive report and form on the same table...
so if user A changes something in csv file...then user B update or delete another record from apex fronted (manually in the apex form)...then after that user A wants to upload the csv file,the record was changed by user B would be overwritten ...
So how can I prevent it?????

Hi Huzaifa,
Thanks for the reply...
I'm going to use File Browser so that end users can upload the files themselves...
after editing data by users...a manger going to review it and in case of approval , i need to insert the data to one final table....
so it needs much effort to check two source tables and in case of difference between table of csv and other one...what to do...

How to print editable mailing labels from Address Book?

I am once again working on Holiday Mailing Labels (450 pple) and needing to export editable mailing labels from a smart group in my Address Book. but I can only print out non-editable pdf labels. Is there a way around this? Editable labels are vital!! Can I export my contacts to a file that can be imported into Microsoft Word Labels Mail Merge?

I have the same problem. After much searching for easy solutions, I just added a user account on my mac, and use the address book/contacts for the end of year mailings. This meant copying, manually, a lot of contacts! At the same time as they were entered the edits were made. I can make edits ongoing within these lists without changing the contacts in my personal user account. There oughta be a better way!!!

How do you manually edit stereo pan keyframe values?

I would like to manually edit stereo pan keyframe values instead of dragging them with the mouse. Is there a way to do this?

SuiteSpot wrote:
Pretty sure this has been mentioned before but with this new look forum there is a good chance it won't be missed now
Hehe! Very good... and yes it has, on more than one occasion.
On the subject of keyframes, there's at least one other modification that some might find useful - and that would be a means to control the 'aggressiveness' of the spline created without having to move a load of points. iZotope do it with a slider in RX in their NR and there, it's quite useful sometimes. Personally none of this bothers me too much, because I very rarely use the automation at all these days - it screws with the background noise on live recordings!

How to "Manually" publish WCF service in Service Registry

Since WCF service publication is not yet supported by ES Explorer for .NET, will someone know me how to do that in SAP NetWeaver CE 7.1.
I did the following:
Services Registry->Publish and picked up the WSDL from WCF, and pressed the Publish button.
Now when I go to "Service Definition" tab, and put service interface name in Find dialog box, the service appears in "Found Service Definitions:.." list, and can see details in "General" and "Endpoints" tabs in the bottom.
However, the "Classifications" and "System Details" tab don't show anything since I just imported the standard WSDL from WCF without any SAP specific extesions.
Can I somehow manually edit them, and classify my service, since I could not do that from the ES Explorer tool?
Edited by: Fakher Halim on Dec 9, 2008 11:49 AM

Rima,
I only have publish button on my CE page. I an using SAP NetWeaver    CE 7.1 SR5. It does not have a "Next" button on its web page. However, I could successfully do the classification of this service.
Here is what I am doing:
1. Going to the first page http://LOCALHOST:50000/index.html. Here I have 8 options, e.g. "Web Services Navigator"; "SAP NetWeaver   Administrator"; and "Services Registry".
I click on    "Services Registry".
A new browser window opens. (I can also do the same by directly navigating to http://LOCALHOST:50000/sr and logging on).
2. The title of this page is "Services Registry".
I click on "Publish" Tab, and see "Publish Services" page underneath it. On this page I just have a single text box with accompanied label "Endpoint WSDL: " and a single yellow button "Publish"
3. When I copy paste my service WSDL, the only button I can press is "Publish" .
After pressing that button, and waiting for a few seconds a green checkbox appears with message indicating that service is successfully published. I never see the "Next" button you mentioned in your solution.
Can you please guide me on that?

How to manually add second detail on master detail page

Hi,
Apex 4.1
can anyone tell me which steps to take excactly to manually create a second detail region on a master-detail form ?
So far I've copied the first detail region and customized it to the second detail table. Copied the processes and adjusted them.
What happends now is whenever I push one of the 2 "add row" buttons the rows are always added to the last region shown on the page. (also if I try to change anything on the data on the form and submit it all kind of errors show up )
It seems like the javascript:addrows() does not work for the region it's defined in, but how to adjust this ??
If I'm forgetting any other steps please also let me know.
Found multiple threads on this but so far no explanation on how to manually do this.
Cheers
Bas

Bas,
Multiple tabular forms or detail regions on a master-detail form are not yet supported. So you best option would be to make one or both of the detail regions read-only report regions with edit links on each row, which would take you to a detail edit page. Alternatively you could try to manually build two tabular form regions on your page, however you will not be able to use any of the built-in tabular form features then, incl the add-row functionality, the multi-row update processes and declarative validations. So all of this would need to be hand-coded in PL/SQL and JavaScript. We have plans to support multiple tabular form regions out of the box, but we don't yet when this might make it into APEX.
Regards,
Marc

How do I edit this script (newbie)

Editing a script
I found a script that creates a reminder event based upon the birthdays of my contacts in Address Book. It looks forward one week at a time.
I'm not familiar with creating scripts. How would I edit this to do the following (if possible)
1- I set up a contact list in Address Book for only those people whose birthdays I want to be reminded of. Is it possible to have this script only look through this contact list, not every contact.
2- Can it also be set up to delete the previously set events (so that the only events that appear are the ones for the ensuing week)
3- Can it be set up to remind me of anniversaries also? How would I edit it? (I tried to find and replace the term birthday with anniversary, but all it did was notify me of forthcoming week's birthdays but called them anniversaries)
Thanks!
===============
birthdayAlert.scpt
User set variables
set numberDaysNotice to 1 -- how many days before the birthday to alert you, 0 is that day
set timeOfNotification to 5 -- the hour you want the notification
set selectedCalender to "Birthday Reminders" -- the calender in iCal you want to add the events to
Setup
set birthdayPeople to {}
set birthdayDates to {}
Get the current date & next week
set today to current date
set nextWeek to today + (60 * 60 * 24 * 7)
Loop through everyone in the Address Book
tell application "Address Book"
set peopleArray to the name of every person
repeat with i from 1 to count of peopleArray
set thisPerson to person i
set thisBirthday to birth date of thisPerson
Check if they've got a birthday entered on their card
if thisBirthday is not equal to (missing value) then
set year of thisBirthday to year of (current date) -- otherwise it uses their birth year
See if it's in the next week
if (thisBirthday is greater than today) and (thisBirthday is less than nextWeek) then
set thisBirthday_day to day of thisBirthday
set thisBirthday_month to month of thisBirthday
Add them to our list
set birthdayPeople to birthdayPeople & name of thisPerson
set birthdayDates to birthdayDates & birth date of thisPerson
end if
end if
end repeat
end tell
If we have birthday's go into iCal and add the alerts
if (count of birthdayPeople) is greater than 0 and ((count of birthdayPeople) is equal to (count of birthdayDates)) then
tell application "iCal"
tell calendar selectedCalender
repeat with i from 1 to count of birthdayPeople
set thisDate to item i of birthdayDates
set year of thisDate to year of today
set time of thisDate to (60 * 60) * timeOfNotification
set day of thisDate to (day of thisDate) - numberDaysNotice
set thisEvent to make new event at end with properties {description:"", summary:(item i of birthdayPeople) & "'s Birthday", location:"", start date:thisDate, end date:thisDate + 15 * minutes}
tell thisEvent
make new display alarm at end with properties {trigger interval:0}
end tell
end repeat
end tell
end tell
end if

1- I set up a contact list in Address Book for only those people whose birthdays I want to be reminded of. Is it possible to have this script only look through this contact list, not every contact.
Sure - if you created a specific group of the people you want to track then just change the line:
set peopleArray to the name of every person
to:
set peopleArray to the name of every person of group "Birthdays"
(or whatever group name you used). You see, as written your script just grabs everyone's name as opposed to just the names of people in the specific group.
2- Can it also be set up to delete the previously set events (so that the only events that appear are the ones for the ensuing week)
Yes, but that's a little trickier since you need some way to denote which events are birthday events vs. other events from last week. If you're using a specific calendar for this then you could just delete existing events in that calendar, or you could implement a minor change to the way you create events - use the description to identify this is one of your auto-created birthday alarms:
set thisEvent to make new event at end with properties {description:"birthday", summary:(item i of birthdayPeople) & "'s Birthday", location:"", start date:thisDate, end date:thisDate + 15 * minutes}
So now the events will have a specific description, so it's easy to start your new script off with a line that deletes existing 'birthday" events, via:
tell application "iCal"
delete every event of calendar selectedCalendar whose description = "birthday"
end tell
(you can nix the '... whose description = "birthday"' element if you just want to delete all existing events in the calendar).
3- Can it be set up to remind me of anniversaries also? How would I edit it? (I tried to find and replace the term birthday with anniversary, but all it did was notify me of forthcoming week's birthdays but called them anniversaries)
Sure, that's because you specifically ask Address Book for birthdays:
set thisBirthday to birth date of thisPerson
To track anniversaries you need to ask Address Book for different data. This one's a little tricker since anniversaries are tracked via the custom date element, so you'd need something like:
set anniversaryList to {}
tell application "Address Book"
repeat with eachPerson in (get every person) -- add 'of group "anniversaries' if you use a specific group
repeat with eachDate in eachPerson's custom dates
if label of eachDate = "anniversary" then
-- this person has an Anniversary set, so add your code here to check if eachDate is in the next week if it is:
copy eachPerson to end of anniversaryList
end if
end repeat
end repeat
end tell
At the end of this you'll have a list of people whose anniversary is upcoming and you can duplicate your iCal code to add anniversary events in addition to birthdays.

How can i edit Iweb published page to open as a Popup?

I want to edit my iWeb site so that when a link is clicked it opens a different page as a popup with no other toolbars, scrollbars etc - just the image i want to show.
I found some code online (http://www.quackit.com/html/codes/html_popup_window_code.cfm) that does this in javascript, but i do not know where in the html file this would need to go for it to force that page to open as popup.
I have text wrangler so i can edit and save the file in the right format again.
I need to be able to set up various different triggers on a web page - Its a single photo image but i want to be able to open different pop-ups depending on where the viewer clicks. I tried using a blank shape (no fill, no stroke) along with an html snippet widget. This triggers the pop-up as i want, but it also places a definite empty box over the image. I need this to be invisible. I have also read that the snippet widget is not the mpst reliable way to add code at specific places on the page.
Hence i think the best way would be to insert code into the actual page that instructs it to open as popup.
Please can someone advise me the best way to go about editing the code to get this result?
thanks
adam

thanks for the suggestions...
unfortunately, i don't understand the code enough to figure out what i need. The pop-ups you show are exactly right, but they are being triggered by smaller individual thumbnails.
That is not what i want - i need to have various trigger points for different pop-ups, placed at diferent places on a larger single image.
Imagine a photo of a crowd - each person when clicked on would open a popup showing a specific image. Its not a regularly laid out grid - and the trigger points need to be manually positioned.
I have created a blank page with the same dimensions as the graphic it contains, then published this from iweb. When i link to this it opens the page as a docked page, with all the navigation bars, scrolling bars etc, as well as a large area of empty white page below the image.
My question is really how do i edit the code of the graphic page so that it only pops open the graphic when its accessed. Surely the relevant code for that would be embedded in the page itself, and not the link that connected to it?
thanks for your patience!
adam

Manually edit volume of MIDI file in Java

Hey all, I'm trying to find a way to manually change the volume (velocity) of a midi file before playback, i.e. directly in the code. This is the code I'm using to play my midi files:
import javax.sound.midi.*;
import java.io.*;
/** Plays a midi file provided on command line */
public class MidiPlayer {
public static void main(String args[]) {
try {
// From file
Sequence sequence = MidiSystem.getSequence(new File("C:\\Sounds\\twinkleaccomp.mid"));
// Create a sequencer for the sequence
Sequencer sequencer = MidiSystem.getSequencer();
sequencer.open();
sequencer.setSequence(sequence);
// Start playing
sequencer.start();
} catch (IOException e) {
} catch (MidiUnavailableException e) {
} catch (InvalidMidiDataException e) {
How can I edit my code so that I can easily change the midi file's volume before I run and compile the code?
Thank you, any help will be appreciated!
PS: Sorry about the twin topics!

Ravaa wrote:
Hey all, I'm trying to find a way to manually change the volume (velocity) of a midi file before playback, i.e. directly in the code. This is the code I'm using to play my midi files:
Thank you, any help will be appreciated!Gosh, I've looked through all of the MIDI references I have, and nothing talks about setting the MIDI file volume...probably because the velocity is set on each individual MIDIEvent...
My best guess as to how to set the global volume for a MIDI file would be to loop through all of the MIDI events in the file and modify their velocities individually...that's the only thing I can come up with.

How do I edit the songs on my ipod through itunes w/o having to update all

I just recently got an ipod and I'm loving it. I am a heavy music downloader and am also very particular about how my songs are organized (no duplicate artist names, songs, etc.)sometimes a song slips my eye, so how can i edit my songs and artists on my itunes and match it back to my ipod without having to delete them all and update the entire library again?
PC Windows XP

Thanks a lot for the help and the quick responses (this discussion site is great)...so one more (Very elementary) question...you both say to sync the ipod "again", how do I do that? I know you sync the ipod when you simply connect it to the computer but after I make song edits, do I manually disconnect then reconnect to automatically update the ipod or is there a drop down button on the top of the itunes page that I can click?
So the run down:
1) Connect the ipod (sync)
2) Ipod settings on: (manually manage music) or (automatically update)
3) Edit the songs desired in: (my library) or (in ipod)? - which one should I do so that I don't have to do it twice?
4) Then resync the ipod to match the library (how do i "sync again")?
Thanks in advance for the help...
Do I have it right?

How to manually edit label

Similar Messages

Maybe you are looking for