How to map service contract data from ecc to crm

Hi Experts,
Please help me,how to map service contract data from ecc to crm system.
is there any perticular process.please let me know.
thanks in advance..

Hi Srinivasulu,
Create the service contract type of ECC and also item categories under it in ECC in CRM. Map the number ranges.
Check the Partners mapping from R/3 to CRM and that will be all.
I tried but in CRM in the transaction type internal number range is mandatory. So, if you create service contract in ECC with one number it will replicate to CRM but with different number. But you can see ECC number under the transaction history in CRM.
Good Luck.
Sharath.

Similar Messages

  • How to transfer data from ECC to CRM via IDocs (Clfmas01),

    Hi all,
    how to transfer data from ECC to CRM via IDocs (Clfmas01), that to material master data from ECC to Production master data in CRM.    
    Need Information regarding, how to upload file to CRM from ECC, through, IDocs......Plz help me...
    Edited by: khaja fareed on Jan 11, 2010 12:44 PM

    First of all push ECC data in to GTS server through T.code:/N/SAPSLL/MENU_LEGALR3. First click on Master data tab there enter customer/vendor number then execute.
    2-Go to document tab there enter Sales order no/PO number then execute it.
    Then go to GTS server in compliance management module you can get all the information.
    Regards
    Sitanshu Panigrahi

  • How to transfer service ticket data from ECC6.0 to CRM 7.0 using LSMW?

    how to transfer service ticket data from ECC6.0 to CRM 7.0 using LSMW?
    Plz suggest me any BAPI or IDOC for that ..
    thanks in Advance .

    You have to convert your long string to a table of shorter strings.
    There may be other ways, but one possibility is to use a loop to process you string.
    while (there is something left)
       put the next e.g. 1024 characters in a new row of your table
    endwhile
    If you need to reconstruct your string from the table, don't use simple concatenation since it will remove blanks at the end of lines. Believe me (from experience) sooner or later this will happen.
    Instead you need to either set the subsections of your long string, or insert from the end of your table and keep shifting the contents (probably less efficient) right

  • Integrating Data From ECC to CRM

    Hi  Experts,
    My requirement is, After Updating the Material master data in ECC , the same updated data is integrated with the corresponding data of the Product Master in CRM.
    Problem: to map the data from ecc to CRM , I am supposed to call this  RFC Fm ( existed in CRM side) from ECC using RFC Destination.
    to map the data to this TABLE parameter , In ECC side I don't have similar strcture that was exist in the SRM side. so could any body help me how can i send the data from ecc to this fm existed in SRM.
    Thanks & Regards.
    Naga Priyanka. T
    Edited by: Priyanka Tubati on Feb 2, 2010 10:35 AM
    Edited by: Priyanka Tubati on Feb 2, 2010 10:38 AM

    Hi Kumar,
    Please select the following parameters when downloading the HR Org from CRM:
    You can do this  in the program RHALEINI (or in the transaction PFAL, which has the same function)
    Tx: SM30--> This scenario is activated in T77S0: ALE REPLI
    Objects:
    1. Plan Version: 01
    2. Object Type:  *
    3. Object Id: Copy the Object Ids which you want to transfer from HR System
    4. Object Status: *
    Reproting Period: All
    Structure Parmaters: Blank
    Transfer Mode:
    Insert: Complete distribution, this will delete the exisiting and recreate it in Target System
    Update: this will update the change records in CRM system
    Message Types: HRMD_ABA
    Also check SAP Note: 119780
    Hope this helps.
    Regards,
    Madde

  • Download ztable data from ECC to CRM 7.0

    Hi,
    I have created ztable in ECC and CRM 7.0,(tables are same).Now I want to downlaod data from ECC to CRM.
    Table should only be updatable from ECC. No maintenance required in CRM.How to achieve this?
    Please suggest me.
    Thanks,
    Brahmaji

    create customizing adapter objects in R3AC3.
    copy the stanadard FM 'CRM_BUPA_MAP_ADREREG_CI' to custom FM and write source code.
    load object in R3AS.
    create a variant and shedule the based on requirement

  • Organization data from ECC to CRM

    Hi Experts,
    We need to download organization data from ECC to CRM, and our requirement is to download two different kinds of org structures, sales org structure and HR org structure. Could you please advise whether this is possible in the system and also if it is possible please advise how to download this.
    Currently we are using ALE to download employees into CRM and transporting org structure in CRM systems from golden client.
    Thanks&Regards,
    Kumar.

    Hi Kumar,
    Please select the following parameters when downloading the HR Org from CRM:
    You can do this  in the program RHALEINI (or in the transaction PFAL, which has the same function)
    Tx: SM30--> This scenario is activated in T77S0: ALE REPLI
    Objects:
    1. Plan Version: 01
    2. Object Type:  *
    3. Object Id: Copy the Object Ids which you want to transfer from HR System
    4. Object Status: *
    Reproting Period: All
    Structure Parmaters: Blank
    Transfer Mode:
    Insert: Complete distribution, this will delete the exisiting and recreate it in Target System
    Update: this will update the change records in CRM system
    Message Types: HRMD_ABA
    Also check SAP Note: 119780
    Hope this helps.
    Regards,
    Madde

  • Transfer z-table data from ECC to CRM via Middleware

    Hi,
    I need to transfer some z-table data from ECC to CRM using middleware. Does someone have any tip or reference link?
    André

    Hi,
    The following link shows the replication from CRM to ECC. The same can be followed for replication from ECC to CRM.
    Replication of Z table from CRM to R/3 - No mBDoc Created
    Regards,
    Susanta

  • When transferring HR data from ECC to CRM via change pointers

    When transferring HR data from ECC to CRM via change pointers ,certain data is getting earsed in CRM
    paricularly the last name and first name of BUT000
    Do you have any idea why this could be happening
    Thanks in advance

    Hi Kittu,
    Change pointers. Change pointers are R/3 objects that mark changes to SAP master data. Change pointers are managed by mechanisms in a Shared Master Data (SMD) tool and are based on Change Document (CD) objects. CD objects record the changes occurring to master data at a field level. These changes are stored in tables CDHDR (header table) and CDPOS (detail table). ALE configuration provides a link between CD objects and change pointers. Internal mechanisms update tables BDCP and BDCPS, which host the change pointers. While CD objects are application-data-specific, the processing status of change pointers is message-type-specific. Also, the ALE change pointers are activated first at a general level and then at the message-type level.
    use this links kittu.
    http://help.sap.com/saphelp_nw04/helpdata/en/ab/27bde462848440ba70cf8eb348c86f/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/12/83e03c19758e71e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/0f/9d563cf19bcb43e10000000a11405a/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ab/27bde462848440ba70cf8eb348c86f/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/12/83e03c19758e71e10000000a114084/frameset.htm
    Creating a change pointer and subsequently triggering an IDOC
    thanks
    karthik

  • Can we download employee data from ECC to CRM using standard middleware?

    HI,
    Can we download employee data from ECC to CRM using standard middleware? If yes pl give me the procedure.(not using HR ALE/IDOC)
    Thanks,
    Regards,
    PV

    Standard replication for employee to CRM is using ALE.
    BDoc send information for CRM for other business partner. If you want to use BDOC message for send employee to CRM, you should build your own BDOC message that read HCC Table and send this information to CRM.
    However send this information using ALE is not difficult. Why don't you wan to use ALE?
    Regards,
    Lyda

  • Customer classification data from ECC to CRM

    Dear Friends,
    We have the middleware active between ECC and CRM for customers. Now we have the requirement to download customer  classification data (XD03->Extras->Classification) from ECC to CRM. Please suggest me how we can map this data in CRM and what middleware developments are required?
    Thanks,
    Rajinikanth G

    Added new fields using AET and did Middleware enhancements as per the note -  Note 736595 - Exchange of EEW fields with R/3 customer master.
    Thanks,
    Rajinikanth G

  • Replication of Plant data from ECC to CRM

    Hello Experts,
    Kindly require your assistance in the following requirement:
    I have replicated the quotes from ECC to CRM.  However, the plant information for all the materials are not getting replicated for quotes from ECC to CRM.
    I have followed the Note 493947 but in vain.
    Only respite being, when the quote moves from CRM to ECC, the plant is getting determined. But it is failing when the quotes move from ECC to CRM. There is no plant determination.
    Kindly request your guidance on this.
    Regards,
    Venkat.

    Hi Venkat,
    'Delivery Plant' field doesn't exist in CRM data model. Please refer to note  note 504169 which will give you the reason as to why some KNVV fields in R/3 system don't exist in CRM. Please read the details provided for "Field name: KNVV-VERSG, KNVV-KTGRD, ..." in the note 504169. This will tell you why 'Delivery Plant' (KNVV-VWERK)
    field doesn't exist in CRM.
    Due to different CRM and R/3 data models KNVV-VWERK field is not exchanged with CRM. Now if you want to enable this data exchange then you will have to enhance CRM data model and then with the help of user exits you can enable the data exchange. Please refer to note 513313 which will give you an idea about these data exchange user exits.
    Please be aware that note 513313 is not a direct solution to your problem but this note describes in detail how you can enable data-exchange between R/3 and CRM.
    Best regards
    Christophe

  • Request Download for Master Data from ECC to CRM resulting in "Wait" Status in R3AR3

    Hi All,
    I have created request download in R3AR2 transaction to download master data for a particular Business Partner from ECC to CRM.
    But after I execute the request in R3AR4 transaction and check its status in R3AR3 transaction, it always states as "Wait".
    Please help me as to how to resolve this issue.
    Thanks in advance,
    Shubham

    Hi Shubham,
    Please check the queues in SMQ2 and what status they are showing?.
    Thanks,
    Faisal

  • Downloading Material Master data from ECC to CRM

    Hello friends, I am working in CRM 5.0., I am finding difficulty in downloading Material master created in ECC to a Product Master in CRM. Can you please tell me how to use Customizations to download the material master to product master.

    Hi Rghunandan,
    To carry out the product replication from ECC to CRM,you need to carry out the foll steps.
    First download the customizing objects using R3AS
    DNL_CUST_PROD0 u2013 Material number conversions
    DNL_CUST_PROD1 u2013 Product : Categories
    DNL_CUST_PROD3 u2013 Material : R/3 sales status
    DNL_CUST_SPROD u2013 Sales product item
    DNL_PLANT - Plant
    To download products foll the steps below
    1.Defining Product ID Settings  -COMCPRFORMAT
    Cross-Application Components  SAP Products  Basic Settings  Define Output Format and Storage Form of Product Ids
    This activity describes how to synchronize the product Ids in the CRM system and the R/3 system.
    The material master length is R/3 is defined in transaction code OMSL and is set to 18.  (also check note no. 545824)
    2.Make sure that CRM item categories and R/3 item categories are the same.
    In CRM, item categories and item category groups are seen via
    Customer Relationship Management  Transactions  Basic Settings
    3.Selecting specific objects for replication : R3AC1
    Use adapter object MATERIAL
    Use filter settings tab and specify the material or a range of products you want to download .Use atble name MARA,field MATNR use an approriate operator and mention theproduct you want to downlaod.
    4.Replicate Materials : R3AS
    mention the adaptor object Material and execute
    Regards
    Itty

  • Contract data from ECC to MDM

    HI all,
    We have standard setup to push Contract data to catalog from ECC using MECCM transaction from ECC... and Via PI we use the standard way to FTP the file... we use standard mapping interface in PI - CatalogueUpdateNotification_Out... which in turn pushes the Data from PI to FTP server. Where the MDM picks it and upload it.
    Everything works fine.... But I need to understand how the MDM recogize the File and how the PORT and XML schemas upload the FIle into MDM database???
    Need to Identify whether it can be modified???
    regards,
    Prabhu

    Hi Prabhu,
    You can upload the xsd from PI into MDM. To get the schema go to your message type and click on xsd tab and copy and paste in notepad and save as .xsd and upload. Else you need to create the schema in external tools like altova xml spy or stylus studio etc.
    There is option in MDM whether to load that file from the port automatically or manually. If automatic it will load immediate else you need to run manaully the file.
    Need to Identify whether it can be modified???
    I did not understand this. Do you mean to change something in the file once written from PI. If yes then try to go to MDM console and open the port and load it manually. So the file will be sitting there and you can modify and upload manually through Import Manager. But this is not advisable in production.
    If PI is sending a csv or tab delimited file then you dont need to have a schme for that. You can load it manually.
    Regards,
    ---Satish

  • How to call and reuse smartforms from ECC to CRM?

    Hi Experts,
    I would like to seek help from all of you, I would like to know if it is possible to call and reuse smartforms created in ECC to CRM environment. The requirement is to create smartforms in ECC (R/3 system) and reuse and call it in CRM environment whenever the 'PREVIEW OUTPUT' button is ticked in CRM webclient. This is to reduce the creation of smartforms from both systems.
    Hope to hear from all of you. Your help will be very much appreciated.
    Thanks and Regards,
    Monica

    You can not reuse it directly but I guess you can download form from ECC and then upload it to CRM. I guess based on your requirement you might end up with few changes to form in CRM to display correct data.
    http://help.sap.com/saphelp_nw70/helpdata/en/c9/452f2d33ca11d5b697006094192fe3/content.htm
    http://www.howforge.com/how-to-upload-smartforms-from-pc
    Smartform Download/Upload problem
    Regards,
    BJ

Maybe you are looking for