How to migrate from G5 dual 1.6 to GT5 dual 1.8 GHz

The processor in my dual 1.6 GHz G5 failed. Rather than pay $1200 for a new processor, I bought a used dual 1.8 GHz G5 for $1100. Desperate to get up and running quickly, I pulled the drive on the new machine, which has Mac OSX 10.5, and replaced it with the 10.4.11 drive from my old machine.
It's working, but performance is slow and shutdown takes 5-10 minutes. The new machine has no bluetooth or airport, and I suspect that I haven't completely disabled the daemons, etc., that are looking for these features.
The only installation disks I have are for Mac OSX 10.3, and the Apple store doesn't sell 10.4 anymore. I do not want to upgrade to 10.5 for various legacy reasons.
Any ideas on how to tune this system? I already repaired disk permissions, ran the utilities available with Onyx, etc.

You should have enough room to keep both drives in that tower. This would allow you to boot from either drive, in case you wanted to try 10.5 and keep 10.4, or just make a copy of the entire 10.4 drive so that you don't risk losing anything before you proceed with any reinstalls.
The on-line Apple store might not have Tiger any more, but you may have luck if you call them in person. They may offer it if you ask...not sure what the latest report on Tiger availability is by phone. Another alternative is to ask for the system discs that came with the computer, depending on what OS version it shipped with, they may ask for the serial number of the computer (don't post that number here, just have it handy when you call the Apple store) Not sure what the $ for each option would be.

Similar Messages

  • HT1444 how to migrate from yosemite beta to full vesion

    Hi
    how to migrate from yosemite beta to full vesion

    When I look in "about this mac" - it says Yosemite 10.10. Do I really need to download it again?
    I found on a blog that someone contacted the Apple service:
    “simply install the final version of the software you are testing when it appears in Software Update” – that means the final version of the beta software you are given to test is what will be made public. So we’re on the same build as what is now in the App Store.
    My compute OSX is 10.10 but build is (14A388b) while some say that app store version is (build 14A389).
    Does it really make a difference? If I don't download it will it continue to update?

  • How to migrate from exchange 2007 to 2013 step by step tutorials please

    Hi
    I am running Windows Server 2008 standard, with exchange 2007 SP2 on it.
    We have 800 mailbox in total
    Our domain controllers are
     Win2012 R2 and I would like to upgrade to Exchange 2013 on Windows server 2012 R2.
    I am running a VM, on VMware environment, so my Windows 2012 R2 is a VM.
    Is there a website or document that explains in detail, step by step how to upgrade from 2007 to 2013.
    I currently only have 1 exchange server 2007, with all the roles on the one server.  I would like to keep that same as
    well with exchange 2013.
    Thanks

    Exchange server deployment assistant is always a good service provider to achieve this task as it simply ask few questions about your current environment and proceed further accordingly.
    You can refer to this blog explained by technet team that will assist you further to gather more information in depth : http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
    Moreover, to avoid the interruptions and proceed a hassle-free migration from exchange 2007 to 2013, this application (http://www.exchangemigrationtool.com/) could also be a good approach to accomplish
    migration task in more secure way.

  • How to Migrate from SAP BO XI 3.1 system to SAP BI 4.1

    Hello Gurus,
    I got a new project and I have to start Upgrade and Migration from BO XIR3.1 to BI 4.1. Please help me out here. More detail are given below. Appreciated in advance.
    1.1    Technical Scope
    Installation of only a production SAP BI 4.1 environment.
    Repository is currently on DB2 but will be on SQL Server for the BI 4.1 implementation.
    All VMware machines: The new architecture calls for 12 VM servers.
    Row-level Security in the universe for authorization of content and Enterprise for Authentication (no SSO). Matrix security model with custom level groups which gives Basic, Intermediate, and Advanced level users to pre-defined folders and content.
    Migrate content (objects, universe and instances) from SAP BO XI 3.1 to SAP BO BI 4.1 for the technical upgrade, the details are below:
    Universes will stay in the UNV format and will not be converted to UNX.
    Only WebI Documents
    All Controlled Folders - (~5600 documents)
    174 Total objects in Public Documents folders (All documents to upgrade & remediate)
    5,433 Total WebI reports in Corporate and other folders (All documents to upgrade, & remediate)
    User Folders – (~6,000 documents)
    6000 + Webi documents accessed in 2013 ( All 6000 + documents to upgrade, NO remediation)
    Inbox – None will migrate
    Total Documents to remediate: up to 5,607
    Migrate all universes and connections
    Migrate all Xcelsius and agnostic documents with no remediation.
    The estimated report count for remediation by complexity, Low-1525, Medium-150 and High-50.
    Assumes a 10% report remediation effort described earlier sections
    Report remediation: should it exceed the base assumptions made in this document, will be implemented as a Change Order. Effort for such change will be mutually agreed between parties. Price to project is determined using this effort and blended rates.
    Testing:
    Conduct planning and inventory analysis; Reusable templates for Migration Plan, Validation.
    Perform migration
    Use the Right Sized Testing framework to plan and conduct testing
    Use the automated Reports Compare tools to compare large volumes of excel / xml data
    Templates based remediation– ensures quality control
    Thanking you best regards.
    AK.
    Message was edited by: Simone Caneparo
    reduced title length

    Hello Mark,
    Thanks for your help. Appreciated.
    Do you know or some one know, how to create at report for Audit purpose of BO 3.1 Universes's Connection, Database type, Network Layer and so on... I want to pull all info in to Webi report which are you seeing in the pictures.
    Please see the attached file.

  • Migrate from G5 Dual 2.5 to 24in Intel iMac

    Hi all, could any of the Guru's here give me some advice. I am migrating my set up from a Power Mac G5 Dual 2.5 to an Intel iMac 24in 2.3. What's the best way of bringing my apps, fonts and settings across to the new machine?

    I would not use Migration Assistant because you are moving from a PPC to an Intel Mac. Read the following:
    A Basic Guide for Migrating to Intel-Macs
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3 or G4 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
    Classic Environment, and subsequently any Mac OS 9 or earlier applications
    Screensavers written for the PowerPC
    System Preference add-ons
    All Unsanity Haxies
    Browser and other plug-ins
    Contextual Menu Items
    Applications which specifically require the PowerPC G5
    Kernel extensions
    Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior (does not work), TechTool Pro (pre-4.5.1 versions do not work), SuperDuper (newest release works), and Drive Genius (untested) may not work properly on Intel-Macs. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
    Intel In Macs
    Apple Guide to Universal Applications
    MacInTouch List of Compatible Universal Binaries
    MacInTouch List of Rosetta Compatible Applications
    MacUpdate List of Intel-Compatible Software
    Transferring data with Setup Assistant - Migration Assistant FAQ
    Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode or copying the critical contents to CD and DVD or an external hard drive will work better when moving from PowerPC to Intel Macs.
    Basically the instructions you should follow are:
    1. Backup your data first. This is vitally important in case you make a mistake or there's some other problem.
    2. Connect a Firewire cable between your old Mac and your new Intel Mac.
    3. Startup your old Mac in Target Disk Mode.
    4. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
    4. Copy the following items from your old Mac to the new Mac:
    In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder)
    /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder)
    /Home/Library/Mail (copy the whole folder)
    /Home/Library/Preferences/com.apple.mail.plist (* This is a very important file which contains all email account settings and general mail preferences.)
    /Home/Library/Preferences/ copy any preferences needed for third-party applications
    /Home /Library/iTunes (copy the whole folder)
    /Home /Library/Safari (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist
    /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data
    Also in /Home/Library/Preferences/Microsoft
    Credit goes to another forum user for this information.
    If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
    5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
    Written by Kappy with additional contributions from a brody.
    I would consider simply reinstalling your third-party applications. All OS X applications are universal binary versions or Intel-only versions. They should not be replaced by your older PPC equivalents.

  • How to migrate from a standard store setup in a splitted store (msg - idx) setup

    How can I migrate from a standard store setup in a splitted setup described in
    https://wikis.oracle.com/display/CommSuite/Best+Practices+for+Messaging+Server+and+ZFS
    can a 'reconstruct' run do the migration or have I do a
    imsbackup - imsrestore ?

    If your new setup would use the same filesystem layout as the old one (i.e. directory paths to the files would be the same when your migration is complete) you can just copy the existing store into the new structure, rename the old store directory into some other name, and mount the new hierarchy instead of it (zfs set mountpoint=...). The CommSuite Wiki also includes pages on more complex migrations, such as splitting the user populace into several stores (on different storage) and/or separate mailhosts. That generally requires that you lock the user in LDAP (perhaps deferring his incoming mail for later processing into the new location), migrate his mailbox, rewrite the pointers from LDAP, reenable account. The devil is in the details, for both methods. For the latter, see Wiki; for the former I'll elaborate a bit here
    1) To avoid any surprises, you should stop the messaging services before making the filesystem switch, finalize the data migration (probably with prepared data already mostly correct in the new hierarchy before you shut down the server, just resync'ing the recent changes into new structure), make the switch and reenable the server. If this is a lightly-used server which can tolerate some downtime - good for you If it is a production server, you should schedule some time when it is not very used so you can shut it down, and try to be fast - so perhaps practice on a test system or a clone first.
    I'd strongly recommend taking this adventure in small reversible steps, using snapshots and backups, and renaming old files and directories instead of removing them - until you're sure it all works, at least.
    2) If your current setup already includes a message store on ZFS, and it is large enough for size to be a problem, you can save some time and space by tricks that lead to direct re-use of existing files as if they are the dataset with a prepopulated message store.
    * If this is a single dataset with lots of irrelevant data (i.e. one dataset for the messaging local zone root with everything in it, from OS to mailboxes) you can try zfs-cloning a snapshot of the existing filesystem and moving the message files to that clone's root (eradicating all irrelevant directories and files on the clone). Likewise, you'd remove the mailbox files on the original system (when the time is right, and after sync-ing).
    * If this is already a dedicated store dataset which contains the directories like dbdata/    mboxlist/  partition/ session/   and which you want to split further to store just some files (indices, databases) separately, you might find it easier to just make new filesystem datasets with proper recordsizes and relocate these files there, and move the partition/primary to the remaining dataset's root, as above. In our setups, the other directories only take up a few megabytes and are not worth the hassle of cloning - which you can also do for larger setups (i.e. make 4 clones and make different data at each one's root). Either way, when you're done, you can and should make sure that these datasets can mount properly into the hierarchy, yielding the pathnames you need.
    3) You might also look into separating the various log-file directories into datasets, perhaps with gzip-9 compression. In fact, to reduce needed IOPS and disk space at expense of available CPU-time, you might use lightweight compression (lzjb) on all messaging data, and gzip on WORM data sets - local zone, but not global OS, roots; logs; etc. Structured databases might better be left without compression, especially if you use reduced record sizes - they might just not compress enough to make a difference, just burning CPU cycles. Though you could look into "zle" compression which would eliminate strings of null bytes only - there's lots of these in fresh database files.
    4) If you need to recompress the data as suggested in point (3), or if you migrate from some other storage to ZFS, rsync may be your friend (at least, if your systems don't rely on ZFS/NFSv4 ACLs - in that case you're limited to Solaris tar or cpio, or perhaps to very recent rsync versions which claim ACL support). Namely, I'd suggest "rsync -acvPHK --delete-after $SRC/ $DST/" with maybe some more flags added for your needs. This would retain the hardlink structure which Messaging server uses a lot, and with "-c" it verifies file contents to make sure you've copied everything over (i.e. if a file changes without touching the timestamp).
    Also, if you were busy preparing the new data hierarchy with a running server, you'd need to rsync old data to new while the services are down. Note that reading and comparing the two structures can take considerable time - translating to downtime for the services.
    Note that if you migrate from ZFS to ZFS (splitting as described in (2)), you might benefit from "zfs diff" if your ZFS version supports it - this *should* report all ofjects that changes since the named snapshot, and you can try to parse and feed this to rsync or some other migration tool.
    Hope this helps and you don't nuke your system,
    //Jim Klimov

  • How to migrate from Oracle 7.3.2 to Oracle 9i (SE)?

    Hi there,
    Can I have some advise on the migration of Oracle Database
    version 7.3.2 to Oracle 9i (SE)?
    How do I do that? Any document?
    Thanks in advance.
    Reagrds,
    Jacky

    I don't have any documents, but this would be my "best guess".
    1) patch from 7.3.2 to 7.3.4 (Oracle 8i upgrade I believe only
    supports oracle 7.3.4 upwards)
    2) Migrate from 7.3.4 to 8.1.7
    3) Migrate from 8.1.7 to 9.0.X
    I'm not sure what paths the 9i migration path supports, but I'd
    doubt they go back to Oracle 7

  • How to migrate from ascii to unicode (MaxDB 7.5)? loadercli: ERR -25347

    Hi,
    I use MaxDB 7.5.00.26. (Ok, I know that I should switch to 7.6, however, it is not possilble for some customer restriction for now, but should be possible quite soon).
    We'd like to migrate a db from ascii to unicode. Based on the infos in the thread "Error at copying database using dumps via loadercli: error -25364" I tried the following:
    Export sourcedb
    1. Export catalog and data
    C:\> loadercli -d db_asc -u dba,dba
    loadercli> export db catalog outstream file 'C:\tmp1\20080702a_dbAsc.catalog' ddl
    OK
    loadercli> export db data outstream file 'C:\tmp1\20080702b_dbAsc.data' pages
    OK
    loadercli> exit
    Import targetdb
    1. Create a new empty DB with '_UNICODE=yes'
    2. Set 'columncompression' to 'no'
    C:\> dbmcli -d db_uni -u dba,dba param_directput columncompression no
    ERR
    -24979,ERR_XPNOTFOUND: parameter not found
    Couldn't find this parameter e.g. in dbmgui (parameters general, extended and support)
    3. Import catalog and data
    C:\> loadercli -d db_uni -u dba,dba
    loadercli> import db catalog instream file 'C:\tmp1\20080702a_dbAsc.catalog' ddl
    OK
    loadercli> import db data instream file 'C:\tmp1\20080702b_dbAsc.data' pages
    ERR -25347
    Encoding type of source and target database do not match: source = ASCII, target
    = UNICODE.
    loadercli> exit
    What is wrong? Is a migration from ascii to unicode to be done somehow else?
    Can I migrate a db from 7.5.00.26 to 7.6.03.15 in the same way or should it be done in another way.
    It would be greate if you point me to a post etc. where these two migrations are explained in detail.
    Thanks in advance - kind regards
    Michael

    Hi,
    I can neither find "USEUNICODECOLUMNCOMPRESSION" nor "COLUMNCOMPRESSION". Could it be that there do exist from MaxDB version 7.6 on and not in 7.5?
    Kind regards,
    Michael
    The complete parameter list (created by "dbmcli -d db_uni -u dbm,dbm param_directgetall > maxdb_params.txt") is:
    OK
    KERNELVERSION                         KERNEL    7.5.0    BUILD 026-123-094-430
    INSTANCE_TYPE                         OLTP
    MCOD                                  NO
    RESTART_SHUTDOWN                      MANUAL
    _SERVERDB_FOR_SAP                     YES
    _UNICODE                              YES
    DEFAULT_CODE                          ASCII
    DATE_TIME_FORMAT                      INTERNAL
    CONTROLUSERID                         DBM
    CONTROLPASSWORD                       
    MAXLOGVOLUMES                         2
    MAXDATAVOLUMES                        11
    LOG_VOLUME_NAME_001                   LOG_001
    LOG_VOLUME_TYPE_001                   F
    LOG_VOLUME_SIZE_001                   131072
    DATA_VOLUME_NAME_0001                 DAT_0001
    DATA_VOLUME_TYPE_0001                 F
    DATA_VOLUME_SIZE_0001                 262144
    DATA_VOLUME_MODE_0001                 NORMAL
    DATA_VOLUME_GROUPS                    1
    LOG_BACKUP_TO_PIPE                    NO
    MAXBACKUPDEVS                         2
    BACKUP_BLOCK_CNT                      8
    LOG_MIRRORED                          NO
    MAXVOLUMES                            14
    _MULT_IO_BLOCK_CNT                    4
    _DELAY_LOGWRITER                      0
    LOG_IO_QUEUE                          50
    _RESTART_TIME                         600
    MAXCPU                                1
    MAXUSERTASKS                          50
    _TRANS_RGNS                           8
    _TAB_RGNS                             8
    _OMS_REGIONS                          0
    _OMS_RGNS                             25
    OMS_HEAP_LIMIT                        0
    OMS_HEAP_COUNT                        1
    OMS_HEAP_BLOCKSIZE                    10000
    OMS_HEAP_THRESHOLD                    100
    OMS_VERS_THRESHOLD                    2097152
    HEAP_CHECK_LEVEL                      0
    _ROW_RGNS                             8
    _MIN_SERVER_DESC                      16
    MAXSERVERTASKS                        21
    _MAXTRANS                             292
    MAXLOCKS                              2920
    _LOCK_SUPPLY_BLOCK                    100
    DEADLOCK_DETECTION                    4
    SESSION_TIMEOUT                       900
    OMS_STREAM_TIMEOUT                    30
    REQUEST_TIMEOUT                       5000
    _USE_ASYNC_IO                         YES
    _IOPROCS_PER_DEV                      1
    _IOPROCS_FOR_PRIO                     1
    _USE_IOPROCS_ONLY                     NO
    _IOPROCS_SWITCH                       2
    LRU_FOR_SCAN                          NO
    _PAGE_SIZE                            8192
    _PACKET_SIZE                          36864
    _MINREPLY_SIZE                        4096
    _MBLOCK_DATA_SIZE                     32768
    _MBLOCK_QUAL_SIZE                     16384
    _MBLOCK_STACK_SIZE                    16384
    _MBLOCK_STRAT_SIZE                    8192
    _WORKSTACK_SIZE                       8192
    _WORKDATA_SIZE                        8192
    _CAT_CACHE_MINSIZE                    262144
    CAT_CACHE_SUPPLY                      3264
    INIT_ALLOCATORSIZE                    221184
    ALLOW_MULTIPLE_SERVERTASK_UKTS        NO
    _TASKCLUSTER_01                       tw;al;ut;2000*sv,100*bup;10*ev,10*gc;
    _TASKCLUSTER_02                       ti,100*dw;30000*us;
    _TASKCLUSTER_03                       compress
    _MP_RGN_QUEUE                         YES
    _MP_RGN_DIRTY_READ                    NO
    _MP_RGN_BUSY_WAIT                     NO
    _MP_DISP_LOOPS                        1
    _MP_DISP_PRIO                         NO
    XP_MP_RGN_LOOP                        0
    MP_RGN_LOOP                           0
    _MP_RGN_PRIO                          NO
    MAXRGN_REQUEST                        300
    _PRIO_BASE_U2U                        100
    _PRIO_BASE_IOC                        80
    _PRIO_BASE_RAV                        80
    _PRIO_BASE_REX                        40
    _PRIO_BASE_COM                        10
    _PRIO_FACTOR                          80
    _DELAY_COMMIT                         NO
    _SVP_1_CONV_FLUSH                     NO
    _MAXGARBAGE_COLL                      0
    _MAXTASK_STACK                        1024
    MAX_SERVERTASK_STACK                  100
    MAX_SPECIALTASK_STACK                 100
    _DW_IO_AREA_SIZE                      50
    _DW_IO_AREA_FLUSH                     50
    FBM_VOLUME_COMPRESSION                50
    FBM_VOLUME_BALANCE                    10
    _FBM_LOW_IO_RATE                      10
    CACHE_SIZE                            10000
    _DW_LRU_TAIL_FLUSH                    25
    XP_DATA_CACHE_RGNS                    0
    _DATA_CACHE_RGNS                      8
    XP_CONVERTER_REGIONS                  0
    CONVERTER_REGIONS                     8
    XP_MAXPAGER                           0
    MAXPAGER                              11
    SEQUENCE_CACHE                        1
    _IDXFILE_LIST_SIZE                    2048
    _SERVER_DESC_CACHE                    74
    _SERVER_CMD_CACHE                     22
    VOLUMENO_BIT_COUNT                    8
    OPTIM_MAX_MERGE                       500
    OPTIM_INV_ONLY                        YES
    OPTIM_CACHE                           NO
    OPTIM_JOIN_FETCH                      0
    JOIN_SEARCH_LEVEL                     0
    JOIN_MAXTAB_LEVEL4                    16
    JOIN_MAXTAB_LEVEL9                    5
    _READAHEAD_BLOBS                      25
    RUNDIRECTORY                          E:\_mp\u_v_dbs\EVERW_T3
    _KERNELDIAGFILE                       knldiag
    KERNELDIAGSIZE                        800
    _EVENTFILE                            knldiag.evt
    _EVENTSIZE                            0
    _MAXEVENTTASKS                        1
    _MAXEVENTS                            100
    _KERNELTRACEFILE                      knltrace
    TRACE_PAGES_TI                        2
    TRACE_PAGES_GC                        0
    TRACE_PAGES_LW                        5
    TRACE_PAGES_PG                        3
    TRACE_PAGES_US                        10
    TRACE_PAGES_UT                        5
    TRACE_PAGES_SV                        5
    TRACE_PAGES_EV                        2
    TRACE_PAGES_BUP                       0
    KERNELTRACESIZE                       653
    EXTERNAL_DUMP_REQUEST                 NO
    _AK_DUMP_ALLOWED                      YES
    _KERNELDUMPFILE                       knldump
    _RTEDUMPFILE                          rtedump
    _UTILITY_PROTFILE                     dbm.utl
    UTILITY_PROTSIZE                      100
    _BACKUP_HISTFILE                      dbm.knl
    _BACKUP_MED_DEF                       dbm.mdf
    _MAX_MESSAGE_FILES                    0
    _EVENT_ALIVE_CYCLE                    0
    _SHAREDDYNDATA                        10280
    _SHAREDDYNPOOL                        3658
    USE_MEM_ENHANCE                       NO
    MEM_ENHANCE_LIMIT                     0
    __PARAM_CHANGED___                    0
    __PARAM_VERIFIED__                    2008-07-02 21:10:19
    DIAG_HISTORY_NUM                      2
    DIAG_HISTORY_PATH                     E:\_mp\u_v_dbs\EVERW_T3\DIAGHISTORY
    _DIAG_SEM                             1
    SHOW_MAX_STACK_USE                    NO
    LOG_SEGMENT_SIZE                      43690
    SUPPRESS_CORE                         YES
    FORMATTING_MODE                       PARALLEL
    FORMAT_DATAVOLUME                     YES
    HIRES_TIMER_TYPE                      CPU
    LOAD_BALANCING_CHK                    0
    LOAD_BALANCING_DIF                    10
    LOAD_BALANCING_EQ                     5
    HS_STORAGE_DLL                        libhsscopy
    HS_SYNC_INTERVAL                      50
    USE_OPEN_DIRECT                       NO
    SYMBOL_DEMANGLING                     NO
    EXPAND_COM_TRACE                      NO
    OPTIMIZE_OPERATOR_JOIN_COSTFUNC       YES
    OPTIMIZE_JOIN_PARALLEL_SERVERS        0
    OPTIMIZE_JOIN_OPERATOR_SORT           YES
    OPTIMIZE_JOIN_OUTER                   YES
    JOIN_OPERATOR_IMPLEMENTATION          YES
    JOIN_TABLEBUFFER                      128
    OPTIMIZE_FETCH_REVERSE                YES
    SET_VOLUME_LOCK                       YES
    SHAREDSQL                             NO
    SHAREDSQL_EXPECTEDSTATEMENTCOUNT      1500
    SHAREDSQL_COMMANDCACHESIZE            32768
    MEMORY_ALLOCATION_LIMIT               0
    USE_SYSTEM_PAGE_CACHE                 YES
    USE_COROUTINES                        YES
    MIN_RETENTION_TIME                    60
    MAX_RETENTION_TIME                    480
    MAX_SINGLE_HASHTABLE_SIZE             512
    MAX_HASHTABLE_MEMORY                  5120
    HASHED_RESULTSET                      NO
    HASHED_RESULTSET_CACHESIZE            262144
    AUTO_RECREATE_BAD_INDEXES             NO
    LOCAL_REDO_LOG_BUFFER_SIZE            0
    FORBID_LOAD_BALANCING                 NO

  • How to migrate from oracle forms 6i....

    Hi......
    i'm currently using Forms 6i having abt 150 forms nad 2oo reports, now i want to migrate all my forms and reports to oracle 10g/11i.
    Which will be the better option to migrate 10g/11i???
    which will be easier to migrate 10g/11i ??
    Is there any complication in migrating from 6i to 10g/11i??
    Will there be any dataloss if i migrate ??
    can i install oracle forms and reports 6i ,10g and 11i in single system ??
    thanks in Advance,
    Regards,
    santosh.Minupurey

    Are you currently deployed on the web or as c/s. Generally speaking for upgrading Forms its a case of open in the builder, regenerate and run. For c/s to web there may be some extra steps to do but generally speaking most Forms will run out of the box.
    CHeck out otn.oracle.com/formsupgrade
    There is also a batch option to help you and there are of course Oracle partners who can help as well.
    Regards
    Grant

  • How to migrate from sql server to oracle

    Hi ,
    My requirement is we are planning to migrate the sql server data to oracle.
    what is the way to do migration from sql server to oracle. Please let me know if any tools are there for migration.Previous we used sql developer( which is provided by oracle i.e. freeware )
    tool but it was created only table structures not ported any data.

    Hi,
    Oracle sql developer is a great tool for migration from sql server to oracle..
    Refer the link,
    http://www.oracle.com/technetwork/database/migration/sqlserver-095136.html

  • How to migrating from Business Objects to OBIEE

    Hi,
    I have one query is it possible migrating from Business objects to OBIEE ? if, yes could you tell me any one regarding this requirement.
    Advance Thanks.

    Hi,
    I don't have any documentation link , we need to design rpd based on BO Universe and BO reports functionality.
    first observe what are the physical tables used in universe those physical tables improted into physical layer of obiee rpd give physical joins. In BMM layer design hierarchies, calculations and outerjoins all these things done in BMM layer thats it.
    Regards,
    Naresh

  • How to :Migration from existing 595 into new 595 in RAC?

    Hi all,
    This is the bit complicated task for me(i.e) first let me explain our environment
    We are having 595 two instances (RAC) and 8300 is our storage due to the position we are not able to enhance the memory and CPU in this existing 595 Server.So what we are planning to make another 595 servers with some high configuration?
    Since this is new area for me dont know any idea of how to migrate these into new 595 Servers.
    fy.i storage will not get any change it will be as it is.
    I need any docs or anyone pls share their ideas and steps how they did(suppose if anyone did this already)
    Waiting For your reply.
    Thanks & Regards
    M.Murali..

    If your objective is to replace the exiting 595's with new one's then follow the steps below :-
    1. configure both the new servers (595) for RAC installation - follow the pre-install steps required for installing clusterware etc. e.g. storage, network, ssh etc..
    2. add both the new servers as a "node3" and "node4" into the existing 2-node cluster - follow the "node add" procedure in the documentation
    3. turn-off the first 2 nodes on old servers (node1 and node2)
    4. test your application with only the nodes...
    5. remove the old nodes using "node delete" procedure given in the documentation
    reference - http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/adddelunix.htm#BEICADHD
    - Siba
    http://dbathoughts.blogspot.com

  • How to migrate  from R/3 4.6 Oracle 9.2 /HPux to SQL on NT platform

    Hello all:
    I am very new to SAP and need to know where to start with this project.
    We are migrating from HP/UX Oracle 9.2 database SAP R3 4.6c to NT based SQL server. After Migration we will be upgrading to ECC5 or 6.
    Can you please tell me where to start. If possibile please be as specific as you can.
    Regards,
    Kourosh

    Check <a href="https://websmp209.sap-ag.de/osdbmigration">OS-DB-Migration Site in SAP Service Marketplace</a>
    Here (Goto Media Library) you'll also find the actual <a href="https://websmp209.sap-ag.de/~sapidb/011000358700002608772002E.pdf">SAP OS/DB Migration Check Planning Guide</a>
    After checking out the ressources mentioned above you can't be more specific...

  • How to migrate from 3GS to 4GS

    I bought the new iPhone 4GS and it is scheduled to arrive tomorrow. I currently have the 3GS and I want to make sure I migrate properly to my new phone.
    Do I have to deauthorize the old iPhone before synching for the first time my 4GS?
    FYI, I have:
    1) Updated my iMac to the latest firmware 10.7.2
    2) Updated iTunes to the latest firmware 10.5
    3) I understand that the 4GS will arrive with IOS 5
    4) Done regular backups on my 3GS and will do the last one when my 4GS arrives
    I read that iTunes does take care of all the guess work... meaning, all I have to do is connect my new phone when arrives and, other than clicking on a few "accept", "yes", etc, nothing else needs to be done. Since I recently migrated from PC environment, I am a bit hesitant to believe that everything will be trouble free...
    Comments, instructions...?

    "...I've done this few times now..."
    Great; however, I thought I ask since *technically* no one has done this specific migration yet.
    I hope apple techs that have work on it chime in with some tips

  • How to migrate from internal hard drive to SSD (Solid State Drive)?

    I just bought 128GB SSD. I want to replace my internal hard drive with SSD on MacBook Pro. My internal drive has only Mac OS installed (no dual boot with Windows/Linux). Going forward I want to boot my Mac OS from SSD and use internal drive for backup purposes only. I read many forums regarding this here, but each one talks about different methods of doing it.
    * Carbon Copy Cloner for the Mac side (free)
    * Casper 6.0 for the Windows side (not free)
    * SuperDuper
    Can some one provide me with simple steps to migrate Mac OS along with my personal data from internal hard drive to SSD?

    Because Windows is not involved, you don't need Casper or anything else Windows-related.
    Use Disk Utility to repair permissions and repair the directory on your internal hard drive. Buy an external SATA hard drive enclosure* and mount your SSD in it. Connect it to the MBP and use Disk Utility to create a single GUID partition on it, formatting the partition Mac OS Extended. Use SuperDuper or Carbon Copy Cloner, it doesn't matter which, to make a bootable clone of the internal hard drive on the SSD in the external enclosure. Restart the computer holding down the Option key, and select the SSD to start up from; the purpose here is to verify that the SSD really is bootable. If that works OK, shut down, disconnect the external enclosure, and exchange the drives.
    *I recommend a FireWire 800 enclosure, but they are much more expensive than USB-only enclosures, which will work OK — USB is just slow.

Maybe you are looking for

  • How can i install or add a Portuguese Dictionary in Adobe Reader XI 11.0.07

    I need this dictionary. Does anybody can help me?

  • Has the 3D performance improved?

    I'll like to see if/how the 3d performance has improved. Is it faster with FX? Of course it will be faster in native, but has the time come for 3D fps applets? Or is it "only" the construction time of the code that's better? I'm not a C fanatic and I

  • Lightbox: removing distance between pictures

    if you put multiple photos in a lightbox, they all nicely display next to each other. now what I want to achieve is that they are all next to each other, but have NO space between them. it seeems not possible however to achieve that. muse automatical

  • How to Zoom In/Out on JPanel

    Hi, I am working on an application and it that i have created one JPanel and added custom components to it. Now my problem is i want scale the JPanel, how an i do that and after scaling the Jpanel i want the all components i added in that also scale

  • Red blotch on dark and black screens

    I got my MacBook pro as a Christmas present this year only a couple months later and I got this issue. I use my laptop for drawing mostly so it's hard to focus when your have a large splotch. I don't think I have apple care so idk what to do or even