How to Migrate my database from SQL Server 2000 to Oracle

I want to transfer my database from SQL Server 2000 to Oracle, Can I do this without using Oracle Migration Workbench ??
Please help me.
Thanks in advance
Vicky... :-)

Do you have a good technical reason for not wanting to use the Migration Workbench?
Given that it's free and does a hell of a lot of the work for you, why wouldn't you use it?
Other than that, I would say you would be on your own...
cheers,
Anthony

Similar Messages

Reg. Migrating data from SQL Server 2000 to Oracle

Hi All,
I need to migrate a same data from SQL Server 2000 to Oracle 9i.In sql server Export option is there, but the problem is some 30 tables have More than one LONG datatype column in a table. That's why oracle not allow to import.
Could you guys find any tool for the same.
Please do the needful.
Thanks & Regards,
Prathap

hi dermot,
it's very urgent now. Can you please give any solution for this.
and also i tried the SQL developer tool. But i got an below error,
Error starting at line 2 in command:
CREATE USER dbo_testdatalatest IDENTIFIED BY dbo_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
Error at Command Line:2 Column:45
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 3 in command:
GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO dbo_testdatalatest
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 4 in command:
CREATE USER epm_testdatalatest IDENTIFIED BY epm_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
Error at Command Line:4 Column:45
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 5 in command:
GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO epm_testdatalatest
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 6 in command:
CREATE USER lportal_testdatalatest IDENTIFIED BY lportal_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
Error at Command Line:6 Column:49
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 7 in command:
GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO lportal_testdatalatest
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 8 in command:
connect dbo_testdatalatest/dbo_testdatalatest;
Error report:
Connection Failed
Commit
Regards,
Prathap.R

How to Migrate Stored procedure on Sql server 2008 to Oracle Database

Guys, I need help vey badly as I am new in this field.
Problem is that, I have to migrate stored procedure on Sql server 2008 to oracle Oracle database:
Whole scenario--
1. Sql Server 2008 application on Windows server (source machine)
2. I have to migrate 70 Stored Procedure
3. To Oracle Database on Linux machine (Target machine)
Any method (no problem)
Please, help me or give me any reference as I don't know which keyword is differ in both database.
Thanks in advance

Hi,
You could the free Oracle SQL*Developer to do this.
There is information and a download link here -
Oracle SQL Developer</title><meta name="Title" content="Oracle SQL Developer"><meta n…
and information on using it for migrations here -
http://www.oracle.com/technetwork/database/migration/index-084442.html
You could use it in 2 ways -
1. Go through a migration but just pull the stored procedure code from the file created after you generate the SQL from the SQL*Server database
2. Use the scratch editor accessed from -
- Tools - Migration - Scratch Editor
and paste the SQL*Server stored procedure code into the window and it will convert it to Oracle code. The tool is very good but may have problems if you have very complicated procedures that use SQL*Server specific utilities.
Regards,
Mike

Migrating a table from SQL server 2005 to oracle 9i

Hi
I need to migrate a table from SQL server to oracle, both of which are on different machines, I tried using SQL server DTS export functionality selected the Oracle driver, created a DSN, but it gave error message box as shown below
Error Source: Microsoft OLE DB Provider for ODBC Drivers
"ORA 12560 :TNS protocol adapter error"
Context:Error During initialization of the provider
While i was successfully able to migrate the table from SQL SERVER to MS-ACCESS and from MS ACCESS to Oracle
thanks
abhishek

Hi
thanks warren, i just figured out that the DSN i had created while migrating data from Access to oracle was User DSN, i just created a system DSN of the similar kind and was successfully able to export the data from SQL server to oracle, the only problem being the column names in SQL server are longer than the limit of 30 characters we have in ORACLE..
Regards
Abhishek

Problem in Loading Data from SQL Server 2000 to Oracle 10g

Hi All,
I am a university student and using ODI for my final project on real-time data warehousing. I am trying to load data from MS SQL Server 2000 into Oracle 10g target table. Everything goes fine until I execute the interface for the initial load. When I choose the CKM Oracle(Create unique index on the I$ table) km, the following step fails:
21 - Integration - Prj_Dim_RegionInterface - Create Unique Index on flow table
Where Prj_Dim_Region is the name of my target table in Oracle.
The error message is:
955 : 42000 : java.sql.SQLException: ORA-00955: name is already used by an existing object
java.sql.SQLException: ORA-00955: name is already used by an existing object
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
I am using a surrogate key column in my target table alongwith the natural key. The natural key is populated by the primary key of my source table, but for the surrogate key, I have created a sequence in my oracle schema where the target table exists and have used the following code for mapping:
<%=snpRef.getObjectName( "L" , "SQ_PRJ_DIM_REGION" , "D" )%>.nextval
I have chosen to execute this code on target.
Among my attempts to solve this problem was to set Create Index option of the CKM Oracle(Create Index for the I$ Table) to No so that it wont create any index on the flow table. I also tried to use the simple CKM Oracle km . Both solutions allowed the interface to execute successfully without any errors, but the data was not loaded into the target table.
When I right-click on the Prj_Dim_Region data store and choose Data, it shows empty. Pressing the SQL button in this data store shows a dialog box " New Query" where I see this query:
select * from NOVELTYFURNITUREDW.PRJ_DIM_REGION
But when i press OK to run it, I get this error message:
java.lang.IllegalArgumentException: Row index out of range
     at javax.swing.JTable.boundRow(Unknown Source)
     at javax.swing.JTable.setRowSelectionInterval(Unknown Source)
     at com.borland.dbswing.JdbTable.accessChange(JdbTable.java:2959)
     at com.borland.dx.dataset.AccessEvent.dispatch(Unknown Source)
     at com.borland.jb.util.EventMulticaster.dispatch(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.open(Unknown Source)
     at com.borland.dx.dataset.StorageDataSet.refresh(Unknown Source)
     at com.borland.dx.sql.dataset.QueryDataSet.refresh(Unknown Source)
     at com.borland.dx.sql.dataset.QueryDataSet.executeQuery(Unknown Source)
     at com.sunopsis.graphical.frame.a.cg.actionPerformed(cg.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
I do not understand what the problem is and wasting days to figure it out. Any help will be highly appreciated as my deadline is too close for this project.
Thank you so much in advance.
Neel

Hi Cezar,
Can u plz help me with this scenario?
I have one Oracle data model with 19 source tables and one SQL Server data model with 10 target tables. I have created 10 interfaces which use JournalizedDataOnly on one of the tables in the interface; e.g in interface for DimCustomer target table, I have 2 tables, namely Customer and Address, but the journalizing filter appear only on Customer table and this option is disabled for Address automatically.
Now I want to create a package using OdiWaitForLog event detection. Is it possible to put all these 10 interfaces in just one package to populate the target tables? It works fine when I have only one interface and I use the name of one table in the interface for Table Name parameter of OdiWaitForLogData event, but when I try a comma seperated list of table names[Customer, Address] this error happens
java.sql.SQLException: ORA-00942: table or view does not exist
and if I use this method <%=odiRef.getObjectName("L","model_code","logical_schema","D")%>, I get this error
"-CDC_SET_NAME=Exception getObjectName("L", "model_code", "logical_schema", "D") : SnpLSchema.getLSchemaByName : SnpLschema does not exist" "
Please let me know how to make it work?
Do I need to create separate data models each including only those tables which appear in their corresponding interface and package? Or do I need to create multiple packages each with only one journalized interface to populate only one target table?
Thank you for your time in advance.
Regards,
Neel

How to transfer database tables from sql server 2000 to oracle 10g

Hi,
I have a database and tables in sql server 2000. I have to transfer those data to Oracle 10g. I have installed Oracle warehouse Builder ETL Tool. Using this how can i transfer data. Any help is vary helpful for me.
Thanks in advance.

you have to do it using ODBC HS.
1. Configure ODBC connection through gateway.
2. Create a initxxx.ora file with HS config.
restart gateway listener services
3. on target o/s add entries to your tnsnames.ora
4. On your target o/s create a db link
restart listener on target
cheeck this out.Non-Oracle connection through HS issue
Edited by: Darthvader-647181 on Jan 29, 2009 2:02 AM

Migrating from SQL Server 2000 to Oracle 10g

Hello,
I am a newbie to Oracle 10g and haven't really worked with Oracle since 8i. I have been tasked to migrate all of our databases and tables to Oracle 10g. I need a little help getting started or pointed in the right direction on how to copy all that data from SQL Server to Oracle 10g. I know that Oracle has an Import/Export Utility, but don't know if it can do what I need. Can some one help point me in the direction I need?
Thanks, Marion

Ayub
You need to download both the Oracle Migration Workbench core tool and the SQL Server 2000 plugin (SQLserver2k.jar). You copy the plugin into the plugin directory, after you unzip the Oracle Migration workbench main.
The tool comes with release notes and a user guide, that explains the necessary setup and migration process.
Donal

Loading data from SQL server 2000 to Oracle using OWB 10.2

Hi All,
I have to move data from SQL server to Oracle using OWB. Any idea how to connect to SQL Server thru the OWB design centre console. There is no detail available in the documentation. OWB cocumentation says that "OWB Integrator for Oracle DB & Apps 3.0" is available to connect to Non-Oracle Database (including Sybase, Informix, ODBC).

Hi,
yes, you can use ODBC and configure HSODBC on the database server to create a database link to the sql-server. If your oracle server is microsoft based you are ready, otherwise you have to buy an odbc-driver for linux, unix or whatever you use.
Ciao Stephan

Error happened during the migration from sql server 2000 to oracle 8.1.7

/*[SPCONV-ERR(18)]:CREATE TABLE TT_CHANP1 statement passed to ddl file*/
DELETE FROM TT_CHANP1;
error as above.
note:
chanp1 is a temporary table under sql 2000
syntax:
create table #chanp1 (chanpid varchar(50))
we try the codes:
CREATE TEMP TABLE chanp1
Error: PLS-00103: "CREATE"
begin declare end exception
exit for goto if loop mod null pragma raise return select update while
<an identifier><a double-quoted delimited-identifier>
<a bind variable><<close current delete fetch lock insert open
roll back save point set sql execute commit for all
<a single-quoted SQL string>
Line: 63
we try " CREATE GLOBAL TEMPORARY TABLE chanp1" again.
but error .

it seems like you are trying to perform a DDL from within the PL/SQL code, which is not allowed directly.
You could use EXECUTE IMMEDIATE within your pl/sql code to perform a DDL statement.

Query Perofmance is much more fast in SQL server 2000 than Oracle 9i

I have converted a database from SQL Server 2000 to Oracle (9.0.2).
In a stored procedure a query based on 4 tables working well in SQL Server which takes just 1 or 2 minutes to give result But in Oracle it takes 3 to 4 Hours to return the results.Although Database hit ratio is 99 plus %. In Oracle when i created indexes on 2 columns of 2 tables it just take 5 to 10 sec. But I want to get the result in less time without indexes. Because in
SQL Server it Works well without indexes.
Please reply me with some solutions or reasons
Regards
AN

Most sites have a job that runs every night to keep the statistics up to date.Really? I would be very surprised if that was the case. Firstly, many sites don't want to take the hit of running stats for a whole system each night. Secondly, I would hope that many DBAs know this statement...
Always keep up to date statistics if you want your database to be efficent. ...is wrong.
The best that can happen from refreshing the statistics every night is that it makes no difference to your application. If your application is running nicely - that is, no users are yelling at you - then your current statistics are good enough. Refreshing statistics introduces instability into the system and might lead to queries performing worse than before.
Gathering stats is not the sort of thing you want to do with a scattergun. Analyze your database once, after you've reached what is a representative data volume and then leave it alone. Only refresh statistics if you have a specific issue (user complaint) and you think stale statistics might be the cause.
Cheers, APC

Siebel database migration from Sql Server 2005 to Oracle 11g RAC.

Hi,
We would like to migrate our Siebel database from Sql Server 2005 to Oracle 11g RAC. Can you suggest the best way to do that ?
The current configurations are:
Application : Siebel
database : SQL Server 2005
The hardware can be changed if needed. Can you please suggest the best approach ?
Thanks,
Naveen.
Edited by: Naveen Kumar C on Mar 18, 2011 9:10 PM
Edited by: Naveen Kumar C on Mar 18, 2011 11:44 PM

Hi Naveen,
We would like to migrate our Siebel database from Sql Server 2005 to Oracle 11g RAC. Can you suggest the best way to do that ?You will need much more which suggestions.
You will need a Siebel professional which has done this type of migration. Migrating the Database is not a task so hard, after migrating your environment should be functional and healthy it is usually the task problematic.
The hardware can be changed if needed. Can you please suggest the best approach ?We can recommend the minimum recommended, but this documentation already does, you need to do a analysis on your environment and ask a vendor Siebel tell the which is recommended for you and how to find the best "number" for you, in your case is very hard because everything changes.
Check this Step-by-Step
Migrating a Microsoft SQL Server Database to Oracle Database 11g
http://st-curriculum.oracle.com/obe/db/hol08/sqldev_migration/mssqlserver/migrate_microsoft_sqlserver_otn.htm
Regards,
Levi Pereira

Migrating 250gb from ms sql server 2000 to oracle

Hi,
i am trying to migrate data from sql server 2000 to oracle. I have tried the online method and it takes more than a day to copy one table with 250 million rows. Currently i am trying the offline method of using migration scripts with sql loader.
this also seems to be taking a very long time for the single table with 250 million rows. Is there an effective way of doing this? please help
thanks

Well, lets look at what you're doing. You're using jdbc/odbc to move 250,000,000 rows. thats like using a straw to pump gas. We recommend that any migration over 10-20 MB should be done using the offline data move.
A couple of questions
1. How fast does the bcp go? How long does it take to complete?
2. When using SQL Loader, are you loading it in raw format? Have you switched off any indexes on the table? Do you have the capability to load in parallel?
Theres a lot you can do with the SQL Loader side to make it a lot fast. You might also want to consider dropping a note on the database forum too.
Barry

MIGRATE ODI FROM SQL SERVER 2005 TO ORACLE

Hello,
Presently we have our master and work repositories in sql server 2005.We also have our source tables in sql server 2005.We are planning to migrate our repositories from sql server 2005 to oracle 10g.We are also migrating our source tables from sql server 2005 to oracle.Do we need to redo all our development in oracle.Can any body help with the steps to migrate our repositories and development work from sql server 2005 to oracle 10 g.
Thanks,
Revanth

dbf it's not sql server.
>
SQL Server databases have three types of files:
Primary data files
The primary data file is the starting point of the database and points to the other files in the database. Every database has one primary data file. The recommended file name extension for primary data files is .mdf.
Secondary data files
Secondary data files make up all the data files, other than the primary data file. Some databases may not have any secondary data files, while others have several secondary data files. The recommended file name extension for secondary data files is .ndf.
Log files
Log files hold all the log information that is used to recover the database. There must be at least one log file for each database, although there can be more than one. The recommended file name extension for log files is .ldf.
>
for dbf to oracle see http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:711825134415

Trying to migrate SQL Server 2000 to Oracle 10g.

Hi.
I´m trying to migrate from Sql Server 2000 to Oracle 10g and I got some troubles.
I have connected both databases with my Oracle Sql Server, after that I went to the Menu--> Migrate--> Fast Migration and then fill all the steps necesary.
I can see the repository`s table at the oracle schema but after that the Sql Developer hang at the point "capture". I let the tool work for 2 hours and nothing to do. It´s not a hughe db so could be done faster.
May I miss something?.
Thanks.

Hi
I also have similar issue when trying to migrate from MS SQL 2005 to oracle 10g.
I use the SQL Developer Version 2.1.0.63.
First, I tried to use 'Quick Migration' then it created repository then stop there with error message
"Error ocurred during capture: ORA-01400: cannot insert NULL into ("DDHCOWNER"."MD_PROJECTS"."ID")"
Then, try manual way to capture SQL server, but some how it doesn't work. It just refresh IDE and stop.
Before this activity, I tried to migrate MS SQL 2005 using 'Quick Migration' and it works. But this time I have to do it on another DB then this happened.
So I re-try the previous connection then encountered the same to all.
Thus, please kindly help to advice how to solve this problem.
Thank you so much.
Regards,
Sai Lin Naung

Junk arabic details while transfer arabic data from sql server 2000 to orac

We are facing problems to view arabic details in oracle which is transfered from sql server 2000 .
In oracle database we are using charecterset is UTF8.
NLS_CHARACTERSET :UTF8 and NLS_NCHAR_CHARACTERSET:UTF8
Sqlr server collation is SQL_Latin1_General_CP1256_CI_AS.
we are using stored procedure for transfering data from sql server 2000 to oracle.
And i am able to view some arbic details which is not transfered from sql server 2000.
I thing some configuration i need to change in sql server.
Can any one help me out from this issue?

I know that this is not the correct forum to ask this question.
If someone knows this issue please help me.
We were using to import from another intermediate sqlserver and it was successfull.
And more over i cannot change anything in oracle database which is live.
The issue is we are using one intermediate sqlserver for transfering the data to oracle apart from main sqlserver.
now we want to stop the intermediate and need to transfer from main sqlserver to oracle Db.
i guess , i need to change some configuration in main sql server.
Main sql server and intermediate have the same collation.
Could you please help me out from this problem?

How to Migrate my database from SQL Server 2000 to Oracle

Similar Messages

Maybe you are looking for