How to Migrate Sol 8/SDS 4.2 Raid 1 disks to Sol 10 VM

I have a system running Solaris 8 with S/w mirrorring of the system & data disks that has to have the O/S upgraded to Solaris 10. Due to the size of a couple of system mount pts it looks like I'll have to do the Solaris 10 initial install option and either combine these smaller partitions back into root or expand them for Solaris 10. Do I have to undo the mirrors & concat/stripes I already have before going to Solaris 10 (just on the system disk and/or the data disk) in order to use Sol 10's VM?

I have a system running Solaris 8 with S/w mirrorring of the system & data disks that has to have the O/S upgraded to Solaris 10. Due to the size of a couple of system mount pts it looks like I'll have to do the Solaris 10 initial install option and either combine these smaller partitions back into root or expand them for Solaris 10. Do I have to undo the mirrors & concat/stripes I already have before going to Solaris 10 (just on the system disk and/or the data disk) in order to use Sol 10's VM?

Similar Messages

  • How to migrate win 8.1 from sata hard disk to ssd

    I brought an Intel SSD 730 480GB 5GBs Sata 3
    I also brought  a RAID CARD SYBA| SYPEX40039 bootable. attached the ssd to that.
    I like to migrate the Windows volume to the SSD.
     but I have trouble to get the boot manager on to the ssd. despite not using uefi on the original install on the 1Tb drive. I can't use ghost. if I use ghost form the other partition(vista)  I can clone partition but  the 1TB is too huge to
    for disk to disk cloning to  ssd 480GB
    Can I start w 8.1 DVD to do a repair on the ssd to get the boot manager to there?

    Hi fs - ab,
    Since third party clone software frequently cause system corruption and it’s not fixable, we only recommend two ways for system installation on new hard disk: performing a clean install or using windows system image restore and both ways need reactivate
    Windows 7. And for system image restore, you can only do a system image recovery to a HDD or SSD that is the same size or larger than the one(s) included in the system image when it was created. You will not be able to do a system image recovery to a smaller
    HDD/SSD. If the HDDs/SSDs are larger, then you will have "unallocated" space afterwards that is left over from the difference that you can extend into.
    In that case, we VERY recommend you to perform a clean install for new hard disk.
    Note: If you decide to use windows system image to restore your computer, you need to create a windows recovery disk (drive) for entry to Windows repair environment.
    About windows recovery disk:
    http://windows.microsoft.com/en-us/windows-8/create-usb-recovery-drive
    Regards

  • How to configure a QFS file system on RAID5 disk in Sol 10 sparc

    Hi Forum,
    I am setting up Sun cluster 3.2 for oracle RAC on solaris Sparc system (2 node setup)
    I have a SAN disk of emc clarrion which is a RAID 5 disk.
    For Oracle clusterware to install it needs QFS file system so i also downloaded sun storedge QFS (refering to sun DOC)
    When i try to mount the samfs filesystem
    bash-3.00# samsharefs Data
    samsharefs: Filesystem Data not mounted
    bash-3.00# sammkfs Data
    Building 'Data' will destroy the contents of devices:
    /dev/dsk/c3t60060160F6B02000760677FF21FCDD11d0s4
    /dev/dsk/c3t60060160F6B02000760677FF21FCDD11d0s5
    Do you wish to continue? [y/N]y
    total data kilobytes = 104857600
    total data kilobytes free = 104857536
    total meta kilobytes = 104857600
    total meta kilobytes free = 104856192
    bash-3.00# samfsinfo Data
    name: Data version: 2
    time: Thu Feb 19 20:05:32 IST 2009
    count: 2
    capacity: 0000000006400000 DAU: 64
    space: 00000000063fffc0
    meta capacity: 0000000006400000 meta DAU: 16
    meta space: 00000000063ffa80
    ord eq capacity space device
    0 20 0000000006400000 00000000063ffa80 /dev/dsk/c3t60060160F6B02000760677FF21FCDD11d0s4
    1 21 0000000006400000 00000000063fffc0 /dev/dsk/c3t60060160F6B02000760677FF21FCDD11d0s5
    bash-3.00# mount /db_qfs
    mount_samfs: Non shared fs and shared are mutually exclusive.
    When i try to mount the file system i get the above message.
    Kindly suggest appropriate steps to resolve this issue.
    Regards
    Prakash

    As per the usual setup of a shared SAN disk. The file system used is UFS. when i started installing oracle clusterware i came to a point where i had to run root.sh. the error i got was UFS filesystem not supported.
    So now i get stuck in deciding which filesystem oracle clusterware would support. As i had the sun storedge QFS file system setup in the document i continued to follow it.
    If you have any steps for configuring oracle clusterware to use the UFS file system it would be an additional help. As i have the UFS file system setup ready at my end.
    Regards
    Prakash

  • How to migrate rtf Templates in XML Publisher ?

    Hi All,
    I want the script so that i can download and upload the RTF files directly from my development instance to my production instance.
    For this i have come across 3 links
    How to migrate rtf Templates in XML Publisher?
    http://download.oracle.com/docs/cd/B40089_10/current/acrobat/120xdoig.pdf
    unable to migrate physical files using XDO Loader utility
    and from here i am running this command from /home/aryan directory
    java oracle.apps.xdo.oa.util.XDOLoader DOWNLOAD -DB_USERNAME apps -DB_PASSWORD fnd -JDBC_CONNECTION sharp.apps.com:1522:tst1 -LOB_TYPE TEMPLATE -APPS_SHORT_NAME CUSTOM -LOB_CODE ZEMP -LANGUAGE en -TERRITORY US
    but it is giving me error "ksh: java: not found". could anyone can tell me how and from where i have to run the download and upload command
    Thanks
    Aryan

    Hi Hussein,
    I tried with applmgr also and still for java -version it is giving me error ksh Java not found
    and for which java it is giving me error no java found in different directories path.
    Thanks
    Aryan

  • OIM11gR2 - How to migrate an Application Instance Form

    Hello,
    I'm trying to migrate an Application Instance Form from my Dev env to my QA env.
    My target system is SAP
    I performed the following steps in Dev:
    1. Installed and configured the SAP Connector (no problem here)
    2. Created a sandbox
    3. Created an Application Instance
    4. Created the Application Instance Form
    5. Ran a target reconciliation to confirm everything is working properly
    6. Exported the sandbox
    7. Published the sandbox
    8. Via Deployment Manager I exported all objects related to SAP (Resource object, Process Forms, Lookups etc.)
    In QA I did:
    9. Installed and configured the SAP Connector (no problem here)
    10. Via Deployment Manager I imported the objects related to SAP
    11. Imported the sandbox
    Problem:
    To my surprise, the Application Instance does not have a Form in the QA env.
    I had to create it manually by performing the following:
    12. Create a sandbox
    13. Open the Application Instance definition
    14. Click on create (to create a form)
    15. Entered the same name I used in my Dev environment
    16. Received an error message saying that the form already exists
    17. Entered a different name for the Form
    18. Saved
    19. Exported the sandbox (to import in Prd)
    20. Published the sandbox
    21. Ran a target reconciliation to confirm everything is working properly
    I tried to reproduce the problem with another (test) destination environment because I don't want to have the same problem when migrating to Prd.
    I repeated the steps 9,10,11 except that I imported the sandbox exported from QA (step 19) instead.
    The same problem: Application Instance definition has no Form attached to it in my test destination environment.
    If I try to create the form with the same name, it gives an error message saying it is already there.
    Is my procedure wrong?
    Is there an official procedure explaining how to migrate only Application Instance Form from one env to another?
    My env:
    OS: Windows 2008 R2 SP1
    OIM: 11gR2 BP7
    SAP connector: 9.1.2.2.0
    Thanks,
    Adr

    This is a bug: Bug:16027176
    Check the [Article ID 1515225.1] which proposes a workaround that might be useful in your case (it was not in mine).
    In short the workaround is:
    The following order should be observed to export :
    - IT Resource & Application instance in one xml
    - Request DataSet in another xml
    - SysAdmin Sandbox (the one defined while creating the Application Instance and the Form)
    - Identity URL Sandbox (defined while customizing the fields on the Form, in the Catalogue page)
    Adr

  • How to migrate ADE content to a new computer

    At some point, everybody needs to upgrade to a new computer.
    After reading a great many postings in this forum, it seems obvious to me that many of us would greatly benefit from some specific guidance on how to install Adobe Digital Editions and Sony Reader Library Software (and reader device) or some other e-book application on the new computer, and then move the previously purchased e-book content from the old to new computer in a way that will ensure that the e-books can still be read.
    Specifically, I think that some/better guidance needs to be provided on the sequence of steps that must be taken, and the options that should (or should not) be selected to accomplish these actions.  For example, does ADE software get installed on the new PC first, or after installing the Sony reader library (or other reader) software?  Should we authorize the new computer?  How about the portable reader devices (Sony P600), do we leave the content on these or will we need to reload it?  Is there a way to ensure the Adobe ID for both SW applications (ADE & Sony Library) are the same so we don't get new or different ID assigned? Will a reader device (which may already contain ebook content) be recognized and automatically resynch with the new computer? and can it move its content from reader to PC, or must the purchased content first be loaded onto the new PC from the old PC, and then be moved (again) to the reader device?
    I can't help but think that answers to these (and many other) questions could be far more easily communicated by proactively publishing some basic (if general) procedures for accomplishing common actions like these, rather than repeatedly providing help to each of us after we have already done the wrong thing.  While technical help is always greatly appreciated, and it may be easier to address a specific problem, it is more effective to provide information that will help us avoid the problem in the first place, and thus reduce the case load and improve response time.
    If I were sufficiently knowledgable to be capable of providing this general guidance myself, I would certainly do so, but count me among the ignorant masses that are simply trying to buy, download, and read their e-books without rendering all their purchased content inaccesible.  I certainly wouldn't want to inadvertently provide misinformation that might cause even greater problems.
    In short, I think that all of us (forum readers) would greatly like to have some simple instructions presented on what to do, (or not to do), to initially set up our computers and to accomplish other basic functions once this has been done.
    Won't somebody with the needed expertise undertake to provide some instructions in this forum?
    Thanks (in advance) for you support.
    P.S. - Keeping purchased content on original (old) and new computers is NOT an option.

    How to migrate ADE from one computer to another:
    1.)  Ensure that your current content is authorized to an AdobeID
         In ADE select "Authorize Computer" from the "Library" menu  if it shows you your AdobeID you are good to go.
    2.) Copy files  - the files are the .epub and .pdf files in your Digital Editions folder in your Documents directory.   Alternatively you can simply copy the whole  Digital Editions folder.  If you copy the whole folder make sure you place it into your Documents directory.
    Note:  on Windows the folder names are "My Digital Editions" and "My Documents"
    3.) Install ADE on the new computer, make sure you enter in the AdobeID from step 1 and the password when asked
    The AdobeID that registred and shown (in step1) above is the same for ADE as it is for Sony EBL (the Sony desktop software) - they both pull from the same place.
    Unfortunately I don't know the steps for migrating Sony EBL.
    For the content on the reader device, you can leave them alone.

  • How to migrate mails from Google Apps to MS Exchange Online IMAP (Getting error)

    Any tips on How to migrate mails from Google Apps to MSOL? What is required? When I am trying to migrate using IMAP but getting fpollowing error
    =======================
    Summary: 1 item(s). 0 succeeded, 1 failed.
    Elapsed time: 00:00:11
    [email protected]
    Failed
    Error:
    Failed to log on successfully for the following reason:
    Server rejected Basic login with following message : * CAPABILITY IMAP4rev1 UNSELECT LITERAL+ IDLE NAMESPACE QUOTA ID XLIST CHILDREN X-GM-EXT-1 UIDPLUS COMPRESS=DEFLATE.
    Exchange Management Shell command attempted:
    'Microsoft.Exchange.Transporter.Provider.PopImap.InternetMailboxMeta' | Move-XsIMAPMailboxToExchangeOnline -AllowUnsecureConnection $false -TargetCredential 'System.Management.Automation.PSCredential' -MaxThreadCount '10' -Quiet
    Elapsed Time: 00:00:11
    ======================
    Any help will be much appreciated.
    Regards
    Sunil DK

    I just finished migrating a client from Google Apps to Microsoft Exchange Online using the IMAP option in the Microsoft Online Services Migration Tool.  
    I added the mailboxes by creating a CSV file [i.e. GoogleApps(Gmail)_Mailboxes.csv] in the following format:
    SourceIdentity,SourceServer,SourceLoginID,SourcePassword,TargetIdentity
    [email protected],imap.gmail.com,[email protected],P@ssword1,[email protected]
    [email protected],imap.gmail.com,[email protected],P@ssword2,[email protected]
    [email protected],imap.gmail.com,[email protected],P@ssword3,[email protected]
    Then I created a custom folder map XML file [i.e. GoogleApps(Gmail)_FolderMap.xml] to map the Google Apps (Gmail) labels to the appropriate Exchange (Outlook) mailbox folders and create those that didn't exist (i.e. Important, Starred, Follow up,
    Misc, Priority) as sub-folders under the Inbox:
    <?xml version="1.0" encoding="utf-8"?>
    <FolderMappings xmlns="http://tempuri.org/FolderMap.xsd">
    <!-- This xml contains the mapping of foldername in source server to folders in target server -->
    <!--
    "path" is the name of the folder in source server
    "Name" is the name of the folder to be mapped into target server
    "SpecialFolder" is the name of the special folder to be mapped into
    target server (Name will be ignored) valid values are :
    Inbox
    Calendar
    Tasks
    Sent Items
    Deleted Items
    Drafts
    Junk E-mail
    Contacts
    Outbox
    Journal
    Notes
    "Description" Description of the folder
    "ExcludeFolder" indicates folders to exclude. Valid values are:
    true (case sensitive)
    false (case sensitive)
    0
    1
    -->
    <!-- Default Mapping Section -->
    <Folder path = "INBOX">
    <Property SpecialFolder = "Inbox"/>
    </Folder>
    <Folder path = "New Mail">
    <Property SpecialFolder = "Inbox"/>
    </Folder>
    <Folder path = "[Root]">
    <Property SpecialFolder = "Inbox"/>
    </Folder>
    <Folder path = "">
    <Property SpecialFolder = "Inbox"/>
    </Folder>
    <Folder path = "Calendar">
    <Property SpecialFolder = "Calendar"/>
    </Folder>
    <Folder path = "Tasks">
    <Property Name = "Migration items/Tasks"/>
    </Folder>
    <Folder path = "Sent Items">
    <Property SpecialFolder = "Sent Items"/>
    </Folder>
    <Folder path = "Sent Mail">
    <Property SpecialFolder = "Sent Items"/>
    </Folder>
    <Folder path = "Sent">
    <Property SpecialFolder = "Sent Items"/>
    </Folder>
    <Folder path = "Deleted Items">
    <Property SpecialFolder = "Deleted Items"/>
    </Folder>
    <Folder path = "Trash">
    <Property SpecialFolder = "Deleted Items"/>
    </Folder>
    <Folder path = "Drafts">
    <Property SpecialFolder = "Drafts"/>
    </Folder>
    <Folder path = "Draft">
    <Property SpecialFolder = "Drafts"/>
    </Folder>
    <Folder path = "Junk E-mail">
    <Property SpecialFolder = "Junk E-mail"/>
    </Folder>
    <Folder path = "Spam">
    <Property SpecialFolder = "Junk E-mail"/>
    </Folder>
    <Folder path = "Contacts">
    <Property Name = "Migration Items/Contacts"/>
    </Folder>
    <Folder path = "Outbox">
    <Property SpecialFolder = "Outbox"/>
    </Folder>
    <Folder path = "Journal">
    <Property SpecialFolder = "Journal"/>
    </Folder>
    <Folder path = "Notes">
    <Property SpecialFolder = "Notes"/>
    </Folder>
    <Folder path = "Public Folders">
    <Property ExcludeFolder = "true"/>
    </Folder>
    <!-- Google Apps (Gmail) Specific Mapping Section -->
    <Folder path = "[Gmail]/All Mail">
    <Property ExcludeFolder = "true"/>
    </Folder>
    <Folder path = "All Mail">
    <Property ExcludeFolder = "true"/>
    </Folder>
    <Folder path = "[Gmail]/Drafts">
    <Property SpecialFolder = "Drafts"/>
    </Folder>
    <Folder path = "[Gmail]/Important">
    <Property Name = "Inbox/Important"/>
    </Folder>
    <Folder path = "[Gmail]/Sent Mail">
    <Property SpecialFolder = "Sent Items"/>
    </Folder>
    <Folder path = "[Gmail]/Spam">
    <Property SpecialFolder = "Junk E-mail"/>
    </Folder>
    <Folder path = "[Gmail]/Starred">
    <Property Name = "Inbox/Starred"/>
    </Folder>
    <Folder path = "[Gmail]/Trash">
    <Property SpecialFolder = "Deleted Items"/>
    </Folder>
    <!-- Custom Mapping Section -->
    <Folder path = "Follow up">
    <Property Name = "Inbox/Follow up"/>
    </Folder>
    <Folder path = "Misc">
    <Property Name = "Inbox/Misc"/>
    </Folder>
    <Folder path = "Priority">
    <Property Name = "Inbox/Priority"/>
    </Folder>
    </FolderMappings>
    Additionally, I had to tell the Internet E-mail Mailbox Migration Wizard to use the "Individual Account Credentials" option since I was able to specify each account password in the CSV file when adding the mailboxes to Microsoft Online Services Migration
    Tools console.
    Just to note, the users had to manually export their contacts to a CSV file and calendars to iCal (ICS) files in order to import those items into Outlook.
    I hope this will benefit others since Microsoft doesn't seem to have a custom, specifically defined migration strategy for this scenario.  With Google Apps being in direct competition with BPOS/Office365, I assumed that Microsoft would have a simple
    strategy using something like ActiveSync to facilitate the migration of email, contacts, calendar entries, etc.  Hopefully we'll see something along those lines become available in a future release of the migration tools.
    --Jon Payne

  • How to migrate Mail & Contacts from backup disk of old PPC iMac (10.3.9) to new iMac (10.8.1)?

    How to migrate Mail & Contacts from backup disk of old PPC iMac (10.3.9) to new iMac (10.8.1)? 
    The Firewire disk is connected and have been able to copy across document folders etc, but Migration Assistant doesn't find the disk so that method no good.  Any help appreciated.

    Thanks, that looks very comprehensive.  Wish I'd seen it before completing Set-Up Assistant initially!  Will follow his instructions and report back.

  • How to migrate Oracle 9i(32 bit) to oracle 10g(64 bit) DB with ASM

    How to migrate Oracle 9i(32 bit) to oracle 10g(64 bit) DB with ASM on SAME platform RHEL4.0
    Scenario My case:
    1) DB size 400G.
    2) Minimum downtime.
    3) oracle 9i(9.2.0.4) source DB.
    4) oracle 10g(10.2.0.3) target DB with ASM.
    5) Source DB (HOST A) and target DB (HOST B) Machine.
    Thanks
    Ashutosh

    I think Werner is suggesting you ask your question in the appropriate forum.
    Go up 2 levels (to Community Discussion Forum) and look for the Database category. It's not that difficult to find, and you will be discussing the question with people who actually care about that kind of question.
    The people who read and interact in this forum do so to discuss Documentation questions. Specifically questions about how to improve the documentaiton.

  • How to migrate iTunes Library from an external hard drive to a new Mac Book Pro?

    How to migrate iTunes and iPhoto librarys from an external hard drive to a MacBook Pro?

    With iTunes:
    iTunes: How to move your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    do not confuse moving your whole folder and library with moving just media files as in
    iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449
    Quick answer if you let iTunes manage your music:  Copy the whole iTunes folder and all its subfolders and files intact to Home > Music on your computer. It will replace the one that may already be there and anything you have in it will be lost -- you could give the folder a different name just in case, and delete it yourself later.  Unplug the external and start iTunes.

  • How to migrate installment plan with open items

    Hi all,
    I am trying to figure out how to migrate an installment plan, when my legacy system does not tie my open items directly to my installment plans.  And the amounts in my open items table may not add up to the exact amount of the installment plan. 
    So for a simple example, I have $10 left on an installment plan that was created 6 months ago. 
    Since the creation of the plan obviously more charges and payments have been posted to this account, clearing previously open items and creating new ones.
    Presently, I have only 2 open items remaining, one for $6 and one for $7.
    So I have "enough" open items ($13 worth) to post the $10 installment plan, but not an exact match.
    The way I read the migration documentation on this, I thought I could use a OPUPZ field (Subitem for a Partial Clearing in Document) to signify that I want to partially clear that $7 charge.  Apparently I misinterpreted that.
    So my question is, is there a way to migrate this installment plan with this set of open items?
    Or is my only option to alter the payment plan to the open items, and say that there is $13 remaining on the plan?
    Thanks.

    C N,
    The principal Idea is to migrate either
    - the original amounts, the installment plan and last the latest payments (you migrate payment history)
    - or to migrate the still open amount as one or more open items and subsequently an installment based on that amount.
    Kind regards,
    Fritz

  • How to migrate content from BW 3.1 to NetWeaver 7.0

    Hello all out there,
    For a couple of years I have been successfully using SDN, finding always the right answer to my questions, however in my late assignment things have not been running that smoothly.
    This is my first posting to SDN and I hope any of you out there can give me a hand.
    <b>My Case:</b>
    We are planning to upgrade from BW 3.1 directly into NetWeaver 7.0
    <b>Our previous research within our planning phase has taking us to read:</b>
    •Everything under the Marketplace NetWeaver Upgrade portal (https://websmp204.sap-ag.de/upgradenw70)
    •Upgrade Master Guide
    •Many docs in SDN
    <b>My Question:</b>
    Based on our research, we have a good understanding about the technical upgrade path and the creation of a new landscape. However anything we have read explains about how to migrate our actual Queries, ODS, Web Templates, Infocubes, Update Rules, InfoObjects, etc to the new environment.
    <b>Could you please point me to the right literature, how to guide, migration path, etc; explaining how to migration content from BW 3.1 to NetWeaver 7.0</b>
    Thanks
    Alejandro

    Hi,
    This is more a question for the BI forums.
    Anyway, have a look at
    service.sap.com/upgrade-bw
    BW3.0B upgrade to BI 7.0 question about BI Content 3.1
    /thread/367125 [original link is broken]
    /thread/150068 [original link is broken]
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
    Eddy
    PS. Which type of SDN Ubergeek/BPX suit are <a href="/people/eddy.declercq/blog/2007/05/14/which-type-of-sdn-ubergeekbpx-suit-are-you">you</a>?
    Deadline: June 15th

  • How to migrate address book in outlook express to PAB?

    How to migrate address book in outlook express to SUN messages server 's PAB?
    Use any LDAP command ?
    Thanks!

    We provice no supported technique for this.

  • How to Migrate EJB Webservice from NW 7.0 to 7.3

    Hi,
    We have upgraded nw portal from 7.0 to 7.31.
    1.how to migrate 7.0 ejb webservice to 7.3?
    2.how to test webservice in portal 7.3.
    i did not find webservice perspective in nwds 7.3.
    please suggest how to acheive .
    Regards
    Srinivas

    The only way to disable access ot the camera from the lock screen is to disable the camera entirely.

  • How to migrate Stellent 7.5.1 custom layout component to OCS 10gR3

    Hi,
    I am in the process of upgrading stellent 7.5.1 to OCS 10gR3. There is a custom layout component in 7.5.1 wanted to find out how can I migrate the layout component. As probably there are changes in 10gR3 so want to find out how to migrate the custom layout component and any changes required before migrating to 10gR3.
    Thanks.

    Hi
    am putting out the steps needed for upgrading an existing CS instance from version 7.5.1 to 10gR3. Its basically a 2 step process where we use Configuration Migration Utility to migrate the CS structure and Archiver to migrate the existing contents. The steps are as follows :
    1. Install a new CS 10gR3 instance on the server and configure it as per the install guide.
    2. Verify that the basic functionalities for the newly installed instance is working fine by doing some simple tests like checkin ,checkout , update etc. Then upgrade the CS to the latest patchset level which can be downloaded from http://updates.oracle.com/download/6907073.html.
    3. Install the latest version of Configuration Migration Utility component (which is found in the same uprgade patch set ) on both the 10gR3 CS (target) instance and the 7.5.1 CS (source).Enable them on both the CS instances and restart the same.
    4. Run the Configuration Migration Utility on the source CS and download the CMU Bundle created on it.
    5. Upload the CMU Bundle created in previous step to the Target CS and import the configurations from that.Verify that the CMU process is completed successfully on the Target CS instance.
    6. Create a new archiver instance on the Source CS and export all the contents in that.
    7. Open the Archiver Applet for the target CS instance and then Point the collections to the collections.hda of the source CS instance so that we can import the contents. Start the Import process on target server.
    8. Once the CMU and Archiver Process are completed then your 10gR3 CS would be an exact replica of the Source 7.5.1 Instance.
    You may also go through System Migration Guide to get more understanding on the Migration / Upgrade processes.
    Hope this helps
    Thanks
    Srinath

Maybe you are looking for

  • Reporting Services Point - possibly permissions issue

    I'm having a really hard time configuring a working reporting services point in my test SCCM 2012 R2 environment and was hoping someone might be able to help me work out what's gone wrong. My servers are WS2008 R2.  SQL Server 2008 R2 is installed on

  • Amazing to see this language in an Oracle web page:

    http://www.oracle.com/technology/software/products/forms/files/clientwrapperdesc.html "Some customers have the requirement that they don't necessarily know which JVM a user has installed, and therefore don't know which URL to give them. " (requiremen

  • Showing Image in Web Dynpro using ABAP

    Hi All, I am new to Web Dynpro ABAP , basically my requirement is to show a image , could any one please tell me the steps to do that , i have already uploaded the image in application server using T-code smw0 , and in the layout i have taken the ele

  • How to open .py files ?

    Hi , Ive got E52, and I want to install this app: http://www.symbian-freak.com/downloads/freeware/cat_s60_3rd/descriptions/systools/s60_3rd_edition_re... . I have Python Runtime 2.0 installed, so how I can open it ?

  • Linking Buttons to Video

    I'm new to Flash and i need some help please! I've been through loads of tutorials but can't find exactly what i need. I'm creating a virtual tour of my website. I've done the intro as a simple timeline with animation text etc, but now what i want to