How to migrate win 8.1 from sata hard disk to ssd

I brought an Intel SSD 730 480GB 5GBs Sata 3
I also brought a RAID CARD SYBA| SYPEX40039 bootable. attached the ssd to that.
I like to migrate the Windows volume to the SSD.
but I have trouble to get the boot manager on to the ssd. despite not using uefi on the original install on the 1Tb drive. I can't use ghost. if I use ghost form the other partition(vista) I can clone partition but the 1TB is too huge to
for disk to disk cloning to ssd 480GB
Can I start w 8.1 DVD to do a repair on the ssd to get the boot manager to there?

Hi fs - ab,
Since third party clone software frequently cause system corruption and it’s not fixable, we only recommend two ways for system installation on new hard disk: performing a clean install or using windows system image restore and both ways need reactivate
Windows 7. And for system image restore, you can only do a system image recovery to a HDD or SSD that is the same size or larger than the one(s) included in the system image when it was created. You will not be able to do a system image recovery to a smaller
HDD/SSD. If the HDDs/SSDs are larger, then you will have "unallocated" space afterwards that is left over from the difference that you can extend into.
In that case, we VERY recommend you to perform a clean install for new hard disk.
Note: If you decide to use windows system image to restore your computer, you need to create a windows recovery disk (drive) for entry to Windows repair environment.
About windows recovery disk:
http://windows.microsoft.com/en-us/windows-8/create-usb-recovery-drive
Regards

Similar Messages

How do I import AVCHD clips from my hard-disk?

Has anybody been able to import AVCHD clips stored in a hard-disk? I save my clips onto my hard-disk after downloading from the media card from the camera however iMovie does not seem to recognize the folder structure.
S.r.

Yes, this worked. Ideally it would be nice not to have to do that as I don't fully trust the disk image format as a final archive format and hence end up duplicating the media. I would prefer to leave it as ordinary folder structure (which works with FCP 6.0.1).
I suppose this could be a .1 release feature.
Thanks,
S.r.

How to migrate only some photos from external hard drive/Time Machine to new Mac?

I just bought a new MacBook Air, after my old Macbook died. Luckily I had everything from the old computer backed up on an external hard drive through time machine. However, when I tried to migrate everything to my new computer, I found I do not have enough room for all of the files. I would like to import just some of the photos/albums from my old Iphoto Library but it looks like I can only migrate the entire library, or else nothing at all? Since I don't have enough space on the new computer, it's not allowing me to import any photos. Is there a way around this?

With iPhoto it's all or nothing. Therefore get a second EHD to restore the library to. Then you can duplicate the library, open the duplicated and delete all of the photos you don't want in it. When that library is small enough to fit on your MBA copy it to the Pictures folder.
Then you can use the paid version of iPhoto Library Manager to copy new events from your MBA library to the library on the 2nd EHD to keep it up to date with all of your photo. There are portable EHDs that are not much bigger than a mouse (the computer kind ) that would work fine for this.

Data Recovery from crashed Hard Disk

Hi,
My HP Pavilion Laptop's internal Hard Disk (Seagate) has crashed Suddenly and it is not getting detected by system.
This hard disk contains some of my important documents which I want to recover. When I contacted a service center, I was told that it can be recovered by some expert professionals but that is a bit costly affair.
Can anyone suggest, how the data can be recovered from the hard disk.?
Thanks in advance for help.
Regards,
Rajeev

If your hard drive is spinning then using an effective data recovery software you can do recover your data yourself. I would advice you to try Kernel for Windows Data Recovery Software to recover your data from Windows file system.

How to upload win 8.1 from my external to my new ssd on a hp pavillion g-6 2200us

need instructions on how to upload win 8.1 from my external to my new ssd on a hp pavillion g-6 2200us. My hd got fried and I bought an SSD to replace it. I got the recovery downloads from hps website and dowloaded them to an external. Now I need to know what to do next. Is there instructions somewhere? Or can anyone explain it to a novice?

When requesting assistance, please provide the complete model name and product number (p/n) of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer, inside the battery compartment or on the startup BIOS screen. Please see How Do I Find My Model Number or Product Number? for more assistance locating this information. DO NOT include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
Sorry but HP only provides the HP Recovery Manager as part of the factory installation. HP doesn't provide downloads of the HP Recovery Manager or HP Recovery Media and you may need to order HP Recovery Media to return you computer to a factory like state.
If you didn't create your HP Recovery Media when you first setup your computer, please contact official HP support in your region / country, via the HP Worldwide Support Portal, to see if HP Recovery Media is available for your computer.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How to migrate from internal hard drive to SSD (Solid State Drive)?

I just bought 128GB SSD. I want to replace my internal hard drive with SSD on MacBook Pro. My internal drive has only Mac OS installed (no dual boot with Windows/Linux). Going forward I want to boot my Mac OS from SSD and use internal drive for backup purposes only. I read many forums regarding this here, but each one talks about different methods of doing it.
* Carbon Copy Cloner for the Mac side (free)
* Casper 6.0 for the Windows side (not free)
* SuperDuper
Can some one provide me with simple steps to migrate Mac OS along with my personal data from internal hard drive to SSD?

Because Windows is not involved, you don't need Casper or anything else Windows-related.
Use Disk Utility to repair permissions and repair the directory on your internal hard drive. Buy an external SATA hard drive enclosure* and mount your SSD in it. Connect it to the MBP and use Disk Utility to create a single GUID partition on it, formatting the partition Mac OS Extended. Use SuperDuper or Carbon Copy Cloner, it doesn't matter which, to make a bootable clone of the internal hard drive on the SSD in the external enclosure. Restart the computer holding down the Option key, and select the SSD to start up from; the purpose here is to verify that the SSD really is bootable. If that works OK, shut down, disconnect the external enclosure, and exchange the drives.
*I recommend a FireWire 800 enclosure, but they are much more expensive than USB-only enclosures, which will work OK — USB is just slow.

How to migrate a web app from JDev 904 to JDev10132?

Hi,
I'm looking for any recommendation on how to migrate a web application from JDev 904 to JDev 10132? The application uses BC4J, Struts and DataTags.
Is there tool support to migrate from DataTags to ADF DataBinding?
Any hints are welcome.
Thanks,
Markus

There is no automated migration of jbo data tags to the new binding architecture.
see:
http://www.oracle.com/technology/products/jdev/htdocs/10.1.3.0.3/desupport1013g.html

How to migrate the data flow from DB CONNECT sourse system from 3.5 to BI

Hi
can any one tell me how to migrate the data flow from DB CONNECT sourse system from 3.5 to BI 7.

Hi,
Go to Infoprovider to which your DB connect DS feeds and Right Click on Data source-> Then Migrate-> With Export---> You have to build new 7.0 Transformations and DTP's etc.
~AK

Hi,disc wiped ,OSX10.9 back on ,how do I restore my data from external hard drive ?Any help welcome .

Hi,disc wiped ,OSX10.9 back on ,how do I restore my data from external hard drive ?Any help welcome .

There's Setup Assistant and Migration Assistant. The cleanest way to do it is Setup Assistant, but you only get that option once when you fire up a fresh install of OSX. If you're past that, you could reinstall OSX by booting with Command-R, or you could use Migration Assistant.
Setup/Migration Assistant instructions:
http://support.apple.com/kb/HT5872

How to transfer my iTunes library from a hard disc to new computer?

Could anybody help me with this issue? I've tried everything I could without any succes...
My computer where I had my iTunes library (complete with many info and ratings) crashed and I lost all my archives. Luckly I had a copy of everything in an external hard disc. My iPod works fine with all the songs from that library. I bought a new computer, but now I cannot transfer the data of the library from the hard disc to the new computer.
I'd really appreciate if somebody could help me...
Many thanks, Rui

Great! Very simple actually (once you know). The library is now corrected listed on iTunes, with my original playlists and the ratings.
But now how do I bring the music files? I've tried to import them from the hard disk, but iTunes didn't synchronize with the ones listed on the library, so there are duplicates of all songs and the ones I can play are not the ones on my playlists and with the ratings.
Do you have another brilliant solution?
Thanks in advance

How can I move my project from external hard drive to my macbook pro?

How can I move my project from external hard drive to my macbook pro? every time I try to do some editing, the sequence is very slow, thanks in advance

Try here...
Setting-up a new Mac from an old one, its backups, or a PC

How can i transfer all my data 250 GB from external hard disk to MAC pro

How can i transfer all my data 250 GB from external hard disk to MAC pro

The simple answer is just connect the external hard drive and drag the files from there to wherever you want them to go. If you need to do something more specific, you'll have to provide more details.

Should I boot from external hard disk and how do I achieve this?

I'm in a downward spiral and need advice about if booting off of an external hard disc is the right thing to do and how to go about it. How I got into this mess I'll write below. My immediate problem is that I want to be able to install a copy of osx 10.5 from the original disks that came with my computer onto a usb hard drive. Then I want to boot from that drive and install software such as disk warrior on the same external hard drive in order to repair and recover the files on my internal hard disk. Not sure if this is easy to do with the install disk that came boxed with my macbook. So is what I want to do feasible and how do I do it? Thanks.
How did I get into this mess?
For those with time to read more. A downward spiral (and my macbook was working fine)::
I have been backing up my work documents onto a 20 GB pendrive waiting to get the money to buy an nas to work with time machine for the two macbooks we have at home as a place to backup photos and video. I bought a network drive but it wouldn't work with my macbook; my time machine backup freezing at 3 gb, but works fine with wife's macbook pro.
I tried to do TM backup on a usb hard disk and got the same problem. Support forums indicated that hard disk problems could confuse TM, so although I was experiencing problem free computing I ran disk utility from internal osx. This indicated an <invalid node structure - file system verify or repair failed> at the checking catalog file stage. So I followed instructions to run disk utility and repair from the installation disk. When I ran disk utility from installation disk I get exactly the same <invalid node structure - file system verify or repair failed>. It gets worse.
After failing with install disk utility, I could not then boot from my hard disk (I had had trouble free computing up to my attempts to use TM) or eject the disk. At first attempt I had no option but to boot from dvd again as hd not offered as an option. Second attempt hd option available but fails. By reading advice given to others I managed to eject the dvd and have tried:
safe boot - it won't
boot in verbose mode and single user (indicates I have disk0s2:I/O error) and won't boot
try to use disk utility from install disk to create disk image on external hd, it won't (cites i/o error)
If I can boot from an external I will try to repair with Disk Warrior as forums indicate that this software has been able to solve <invalid node structure> issues (but am open to recommendations of other products). I also hope that I may be able to try again to burn a disk image sucessfully if this repair works. I'm still trying to save my photos and videos that aren't backed up.
I plan to try an archive and install installation but first I want to try a repair with disk warrior as I fear that archive and install won't work and I'll end up having to erase and repair my hard disk.
I feel like some perverse god is punishing me for trying to do the right thing and back up my hard disk.
Macbook 5.1 late 2008
Intel Core 2 Duo
OSX Leopard 10.5.8
85 GB of a 150GB hard disk needs backing up (saving)

I am not sure about this, but my memory is that if you try to partition the drive (in OS 10.5.8) it will erase the data.
But you can try. Go through the Add a partition steps, but watch for any warnings. If my memory is correct there will be a message to the effect that everything will be erased. If you see that, do not proceed. This page has info about how to do it, if it can be done: http://www.macworld.com/article/1164643/live_partition.html
With respect to DW on an external, I do that. I have a 80 GB external - I call it Emergency - with an OS, DW and TechTool Pro on it. (Since I have is a recovery partition built in with all new OS, Emergency would be of use only if I need to run DW or TTP.) I have never yet had to use it, but it's there. It is not usually connected - I just did that for this screen shot.

Is there an instruction sheet detailing how to install Photoshop Elements 13 (from a DVD disk), on a Windows 8.1 computer, and if so, where do I find it

Is there an instruction sheet detailing how to install Photoshop Elements 13 (from a DVD disk), on a Windows 8.1 computer, and if so, where do I find it?

Googled for an instruction sheet. Got the following.
https://helpx.adobe.com/photoshop-elements/getting-started/install-pse.html
and
https;//helpx.adobe.com/photoshop-elements/kb/photoshop-elements-installation-errors.html
(Don't know why the second one didn't turn into a link, that's the url that printed out at the bottom of the page)
In any case it doesn't matter. I returned it to the store where I bought it.
Rule #1; Don't use a product if the people who produce that product (software, hardware, etc.) don't properly support it.
User forums and\or chat lines, are useful and may help. But! They do not constitute proper support (not for installation purposes anyway).

How do I remove Apple Mail from my hard drive? Over 10,000 downloaded into my mail and continues to freeze up--- I just want to use my gmail account directly

How do I remove Apple Mail from my hard drive? Over 10,000 downloaded into my mail and continues to freeze up--- I just want to use my gmail account directly

I go to Gmail to do my email yes, in my browser, but ya know how sometimes you click on a website to email someone and it pulls up apple mail, and then tons of email dump into apple mail and it frequently causes my computer to lock up and have to shut down w/escape. I thought it would be better to take it off if I could

How to migrate win 8.1 from sata hard disk to ssd

Similar Messages

Maybe you are looking for