How to modify  a table without  setting system to modifiable

Hi All
Is there a way to modify a table without setting the system to modifiable either in SCC4 or SE06.
We locked SCC4 in our system , however one tables are not able to modify.
table name YAUTM
Is there a way to bypass this?
Edited by: Shou Woon Wee on Jan 11, 2008 3:09 AM

Hi Shou......
if it gives you a message....."the client is not modifiable"/ ALIAS "table not modifiable"  ...then from a security perspective....you cant, and you might not want to bypass it!
SCC4 settings are meant to be for that!  Contact your Basis team for this.
The only way to bypass this is thru ....sending changes through a transport request.
Curiosity: what environment are you trying this out ? cant be sandbox or DEV!
Regards
Abhishek

Similar Messages

  • Note:304522.1 How to Move Queue Tables without using export import

    Trying to use the pkg available in Metalink "Note:304522.1 How to Move Queue Tables without using export import"
    Using the 10.1.0.x and upwards Package, I'm getting the following error on a single consumer queue table with an xmltype payload:
    SQL> exec move_aqt.move('XFORM_TEST_INT','INTERFACE_XML_QUEUE','SMALLBLOCK');
    BEGIN move_aqt.move('XFORM_TEST_INT','INTERFACE_XML_QUEUE','SMALLBLOCK'); END;
    ERROR at line 1:
    ORA-20000: ORA-06502: PL/SQL: numeric or value error
    ORA-06512: at "SYS.MOVE_AQT", line 652
    ORA-06512: at line 1
    We've tried in multiple environments, always with the same results.
    Trace file shows:
    *** 2006-11-08 10:06:47.154
    *** SERVICE NAME:(SYS$USERS) 2006-11-08 10:06:47.147
    *** SESSION ID:(379.954) 2006-11-08 10:06:47.147
    qtable move procedure starting execution at 08-11-2006 10:06:47 for queue table XFORM_TEST_INT.INTERFACE_XML_QUEUE
    qtable move procedure experienced an exception at 08-11-2006 10:06:47
    qtable move error message ORA-06502: PL/SQL: numeric or value error
    qtable move procedure ended execution at 08-11-2006 10:06:47
    Can anyone help with this? Has anyone used this before successfully (or not successfully). We urgently need this working today to test moving our queue table into a tablespace with a smaller block size for performance reasons in production.
    Thanks for the help!
    Tony

    Thank you,
    Yes we've done that. They've confirmed a problem with the links/scripts on the note. The 10.1 and up version was not really 10.1 and up.
    As they would not have a new version available in time for the move we needed to perform, we switched our approach to using dbms_redefinition instead.
    Thanks for the reply,
    Tony

  • I need to set up 9 IPhones and 4 IPads to be used as data collection devices. How can I do that without setting up 13 separate ITunes accounts?

    I need to set up 9 IPhones and 4 IPads to be used as data collection devices. How can I do that without setting up 13 separate ITunes accounts?

    You can use the same account to set up as many devices as you like.
    You might also find there are tools to help with a roll out.
    http://www.apple.com/support/iphone/enterprise/
    tt2

  • How to maintain a table without authorization

    Hi
    Can anyone let me know how to maintain a ztable without authrozation
    Thanks
    Venkat

    Hi
    table maintanance Generator is used to manually
    input values using transaction sm30
    follow below steps
    1) go to se11 check table maintanance check box under
    attributes tab
    2) utilities-table maintanance Generator->
    create function group and assign it under
    function group input box.
    also assign authorization group default &NC& .
    3)
    select standard recording routine radio in table
    table mainitainence generator to move table
    contents to quality and production by assigning
    it to request.
    4) select maintaience type as single step.
    5) maintainence screen as system generated numbers
    this dialog box appears when you click on create
    button
    6) save and activate table
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
    http://help.sap.com/saphelp_46c/helpdata/en/a7/5133ac407a11d1893b0000e8323c4f/frameset.htm
    /message/2831202#2831202 [original link is broken]
    One step, two step in Table Maintenance Generator
    Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
    Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
    Reward points if useful
    Regards
    Anji

  • How to copy a table from one system to another system

    Hi all,
            can any one say how to copy table from one system(sys1) to another system(sys2).
    regards,
    nagaraj

    There are many ways.
    1. Use the already existing transaport request number for that table to do the transaport (Active)
    2. Create mannual transport request from SE01 and in the object list enter following
    R3TR -- TABI -- <Table Name>
    And do the transaport.
    3. Ask your basis consultant to do the transaport from oracle layer.
    Thanks,

  • How to deactivate s26X tables in Source system

    Hi All,
    I have an  requiremnet
    I have to stop updating of s26x table in source system, as data is not extracting to BW (version 3.0)
    I have deactivated the Infostructure in LBWQ 2lis_01_26x. By which Delta tables got deactivated .
    But still the s26x table is getting updated  in source system.
    Thansks in advace
    Leena

    Hi,
    Please stop the job control of the extractor.
    -Vikram

  • Way to access config table without opening system

    Hi Experts,
    In the PSCD module, there are some config tables that need to be updated weekly with data.  This weekly maintenance is not in line with the goal to reduce our transports to PROD to once a month.   How can we update those tables directly without transporting or opening the system?
    An example is table TFK001U.  We need to enter new users in that table.  It is a client specific table.  It stores 3 fields, client, user name , and recon group.  We have a tcode to access it directly, but still get the message:  TK430 (Client XXX has status 'not modifiable').
    Please advise how to get around that error.
    Thanks in advance,
    Cindy

    No. I think to maintain this one, you need also or opening the client or make changes with closed client but asking for a request and transporting this content.
    In last case, you need table maintenance dialog but don't need a transaction if you can use SM30 to maintain it.
    PS: Sometimes we ask to BASIS team to open a system for a while, so we can make our changes and after that ask them to close it again. It depends on your necessity.
    best regards.
    Glauco
    Edited by: Glauco Kubrusly on Jul 21, 2011 11:40 AM

  • In sm30, when save, how to fill the table with the system data in the table

    Hi all, in SM30, we have user name and time fields, when we create record, after we click the SAVE button, it will automatically fill the fields with the system data, how can we realize it?

    Hi ,
    Do like this.
    1. Go to SE11 -> give your table name and press on change button .
    2.Go to Menu->Utilities-> Table Maintainance Generator , then it will take you another screen .
    3.Assign Functin group if already have one , other wise create function group and assign
    4.Go to Menu->Environment->Modification->Events , again it will take you to another screen
    5.Click on new entries
    ->Now press F4 in T column . Select<u> "01" - Before saving the data in the database</u> and in form routinue give any name of the routinue like "SAVE_USER_DATA" and press enter then u can see an editor symbol in next column click on that it will take you ABAP editor there type this code .
    ztable-username = sy-uname.
    ztable-createtime = sy-uziet.
    check and activate the code .
    With this your job will be complete . Now while entering data just leave columns blank , they will insert corresponding username and time
    Don't forget award points if it helps you.
    Regards,
    Raghav

  • How to join two tables without constraints??

    I want get the tables to be joined without constraints!!
    table1 :
    100     get
    101     wet
    102     set
    and
    table 2 :
    10     xxx
    11     yyy
    12 zzz
    I got the output like this,
    output :
    ID NAME ID NAME
    101     wet     10     xxx
    101     wet     12     zzz
    101     wet     11     yyy
    100     get     10     xxx
    102     set     11     yyy
    102     set     10     xxx
    100     get     11     yyy
    100     get     12     zzz
    102     set     12     zzz
    but i want everything to be written once.
    Help me out with this!!???

    Tanx fr the response!
    Nah, but me used toad to run it. And my query is
    QUERY 1 :
    SELECT * FROM PARTES P,CUSTES C
    WHERE (P.ID,P.NAME,C.ID,C.NAME) IN (SELECT P1.ID,P1.NAME,C1.ID,C1.NAME
    FROM PARTES P1,CUSTES C1)
    QUERY 2 :
    select id as pid, name as name from partes
    union
    select id as pid,name as name from custes;
    OUTPUT FOR QUERY2 IS,
    PID NAME
    10     xxx
    11     yyy
    12     zzz
    100     get
    101     wet
    102     set
    In the 2nd query am getting the joined records of both the tables. But my need is both the tables record to be displayed like this
    ID NAME ID_1 NAME_1
    10     xxx 100     get
    11     yyy 101     wet
    12     zzz 102     set
    What i am trying is,i want to join the all the columns parallely in my output!!
    Is there any source mike?

  • How to display a table without selecting the first row as default ?

    Hello All,
      Can someone advise on how I am able to display a table but with no row selected on initial display ? Currently, the table is being displayed with the first entry selected by default (The orange box is selected). Thank you very much.
    from
    Kwok Wei

    Javadoc for IWDNode says:
    public void clearSelection()
        Clears the Node's multiple selection; does not change the lead selection.
    public void setLeadSelection(int index)
        Sets the lead selection to the given index. It may be called with NO_SELECTION to reset (clear) the lead selection.
        Parameters:
            index - the index of the element
        Throws:
            ContextException - if caller tries to reset the selection, but selection is mandatory
            IndexOutOfBoundsException - if the given index is not within the element list
        See Also:
            getLeadSelection()
    Armin

  • How to reordering a table without coloring the entire column ?

    Hi,
    When I click on a column header to re-order the table, the entire column is show in a differente color. Is there any way to avoid this behave ?
    Thanks,
    M�rcio

    Javadoc for IWDNode says:
    public void clearSelection()
        Clears the Node's multiple selection; does not change the lead selection.
    public void setLeadSelection(int index)
        Sets the lead selection to the given index. It may be called with NO_SELECTION to reset (clear) the lead selection.
        Parameters:
            index - the index of the element
        Throws:
            ContextException - if caller tries to reset the selection, but selection is mandatory
            IndexOutOfBoundsException - if the given index is not within the element list
        See Also:
            getLeadSelection()
    Armin

  • How to use jar files without setting classpath

    Hi,
    I have a situvation, I can not set classpath, but i have to use jar files, how can I do that.

    URL[] urls = new URL[]{pathToJar, pathToAnotherJar, ...};
    URLClassLoader urlc = new URLClassLoader(urls);
    Now load classes within the jars loaded by the urlc classloader as needed. This is a limited approach, you can mostly use interfaces to work with classes loaded by the custom loader instance above and your existing classes.

  • How to install Twitter app without setting security questions?

    Hello! I recently registered a Twitter account. iOS 6 includes Twitter integration - great. When I navigate to Settings - Twitter and tap the Install button, a dialog shows up: "Improve your Apple ID security" and "Set security questions" blah blah. There are two buttons in the dialog, "Set questions" and "Cancel". If I tap Cancel, Twitter app download doesn't begin and Twitter icon disappears from my SpringBoard. If I tap "Set questions", I need to answer some stupid questions. If I leave answer boxes empty, I can't continue. I will not set any security questions for my Apple ID, that's for sure.
    How I can install Twitter app?

    I just encountered the same problem when I tried to download Twitter on my husband's new iPhone 5.  There was no problem when I installed Twitter on my iPhone 3GS yesterday :-( 
    You've probably seen by now that there are many, many people who are having problems with the 'Help improve Apple ID security' message - not confined to iPhone but also on iTunes, iPod Touch, iPad etc.
    I chose the 'Not Now' button on his iPhone 5 and the Twitter app wouldn't allow me to proceed ....
    Looks like Apple aren't in any hurry to fix this because people have been complaining about it for months (after all,  your post is more than 3 months old and the problem is still occurring).
    Were you ever able to activate Twitter on your iPhone 4S?
    Tricia

  • How to download Dictionary Tables to Local system(pc) [including Structure]

    Hi everyone,
    I am in need of a program that downloads a given table and stores that in the local system. I already got some programs to download report programs but didnt get one to download a table.
    Please let me know if there is any SAP Standard Program for that or anyone's own coding.
    Thanks in advance....
    Regards...
    Karthik D

    Hi vasanth,
    I mean to say, iam now working in IDES server and my company is moving to a new server. So is there any posibility to store my dictionary tables(Z* tables) in some Local filesystem format(Something like Access or Excel)?.
    I need a Report program which gets the table name as the input and stores it in some location in the local system. The table definition is enough but its better if it stores the records too.
    Think i clearly explained my question...
    Hope to get a good solution..
    Regards...

  • How to 'pivot' a table without aggregating the data?

    Hi!
    Suppose I have a simple query which returns the 1st (yellow) table in the attached picture.
    I wish to convert this table to the 2nd table (green). This is sort of a pivoted table, but all the individual rows are shown separately, and not aggregated
    How can this be done?
    The simple query could be as follows:
    CREATE TABLE #Table1
    (Type varchar (10),
    DocNum Int,Qty Int)
    Insert into #Table1 Values
    ('SOrder', '1125','100'),
    ('POrder','4615','50'),
    ('POrder','4616','50'),
    ('GRPO','2001','25'),
    ('GRPO','2002','25'),
    ('GRPO','2003','25')
    SELECT * FROM #Table1
    Note: In the "transposed" table, the rows can be in any order
    Thanks
    Leon Lai

    Hi Visakh,
    Thanks a lot for your reply.
    It works fine for me, and your query gave the foll. results which are exactly what I wanted:
    Sorder_Type
    SOrder_DocNum
    Porder_Type
    POrder_DocNum
    GRPO_Type
    GRPO_DocNum
    SOrder
    1125
    POrder
    4615
    GRPO
    2001
    NULL
    NULL
    POrder
    4616
    GRPO
    2002
    NULL
    NULL
    NULL
    NULL
    GRPO
    2003
    I cant understand reason behind requirement like this
    It is rather difficult to explain my rationale in this forum.
    In brief, I am developing a kind of relationship map for all documents in a chain of transactions.
    I would need to trace all base documents and all target documents in the chain, but the relationships
    can be extremely complex in real life. So, I chose to ignore all  the exact joins, and to simply list the relevant documents in any
    order.
    It is quite remarkable that you have correctly answered my question, even though you could not understand my rationale. 
    Best Regards
    Leon 

Maybe you are looking for