How to Modify the standard layout set for Sales Order

Hi all,
Do we have any sap defined standard to modify the sales order,if no How to Modify the standard layout set for Sales Order,an also plz send me the step by step procedure for the same.
Thanks in advance
Santosh R

Hi, Dear Ferry Lianto,
Thank you very much.
Commonly I know the total pricing procedures.
But, would you please tell me how to control the CURRENCY for the subitem of a condition type as follows?
For example, I can see the following kind of
contents in the Tab:condition of a sales order:
PR00 Price 130.00000 TEST 100
 Gross Value 20.12 USD 100 <-how to
 Discount Amount 0.00 USD 100
 Rebate Basis 20.12 USD 100
 Net Value for Item 20.12 USD 100
 Net Value 2 20.12 USD 100
 Net Value 3 20.12 USD 100
VPRS Cost 27.22 HKD
 Profit Margin 16.61 USD
The currency of PR00:price can be controlled via tcode VK12; but how to control the currency of its subitem such as gross value, discount amountm, net value for item, net value 2, & net calue 3...
Thanks and regards.

Similar Messages

How to change the standard layout sets in ALV List

Hi Gurus,
How to change the standard layout sets in ALV list.
Is there any standard program ? or specific way to acheive this?
Kindly drop some clues?Every valuable clues rewarded more points........
Thanks in Advance,
Dharani

Hello Dharani
All required function modules can be found in function group SLVC (assuming that you are using OO-based ALV or, at least, fm REUSE_ALV_GRID_DISPLAY_LVC):
LVC_VARIANT_DEFAULT_GET (Read default display variant (description only, w/o field catalog))
LVC_VARIANT_EXISTENCE_CHECK
LVC_VARIANT_F4 (Display variant selection dialog box)
LVC_VARIANT_SELECT (Read a display variant)
For a sample report using LVC_VARIANT_DEFAULT_GET have a look at BCALV_GRID_10.
Regards,
Uwe

How to define the detail "Condition" item for sales order?

Hi, I checked the condition information of a sales order, the following contents were displayed:
PR00 Price 230.00
 Gross Value 230.00
 Discount Amount 0.00
 Net Value for Item 230.00
 Net Value 2 230.00
 Net Price 230.00
I can understand that the price 230.00 can be maintained via tcode: vk11, what I want to know is:
How to define/control the following items such as:
Gross Value 230.00
Discount Amount 0.00
Net Value for Item 230.00
Net Value 2 230.00
Net Price 230.00
and how to control their currency?
Thanks.

Hi, Dear Ferry Lianto,
Thank you very much.
Commonly I know the total pricing procedures.
But, would you please tell me how to control the CURRENCY for the subitem of a condition type as follows?
For example, I can see the following kind of
contents in the Tab:condition of a sales order:
PR00 Price 130.00000 TEST 100
 Gross Value 20.12 USD 100 <-how to
 Discount Amount 0.00 USD 100
 Rebate Basis 20.12 USD 100
 Net Value for Item 20.12 USD 100
 Net Value 2 20.12 USD 100
 Net Value 3 20.12 USD 100
VPRS Cost 27.22 HKD
 Profit Margin 16.61 USD
The currency of PR00:price can be controlled via tcode VK12; but how to control the currency of its subitem such as gross value, discount amountm, net value for item, net value 2, & net calue 3...
Thanks and regards.

How to modify the standard table

plzzzzz answer my qestion.
how to modify the standard table?
in my knowedge we have the accese key is it correct or worng

Hi
The system asks for access key only of two reasons:
1) You may be having problem of access rights. You would have to contact basis peopl.
2) You may try to name an object not complying with the rules. You may have to check with the same.
the process of getting access key is
the steps to get access key
you can also try via transaction OSS1
In your Inbox, click on 'Registration', then on 'Register Objects', then you will have to choose your installation and give details about your object.
The details you can get by going to your object and clicking on 'Change' - the pop-up screen which asks you for the access key gives you all the details you need to fill in on OSS1 to get your key.
or
U can get Access key from www.service.sap.com
After getting into the site,select quicklinks, then click s to goto SSCR, in
that select registration,
after giving the proper details, u can get the access key
or
on sap support portal (sapnet)
--> key & request
---> register SSCR key
---> registration
---> register developper
and then choose your rigth installation number
you can get the access key in this way
reward if usefull

How to modify the standard script in scripts?

how to modify the standard script in scripts?

Nagaraju,
Standard scripts cant be modified.
Only thing is you need to copy it to z-form and have to do modifications as per ur requirements.
Here is the procedure to copy standard form to z-form.
goto SE71 t-code, then select the menu path : Utilities -> Copy from Client
then it will take to another screen, give the form name as Standard form name, if u r copying a stadard invoice means, type RVINVOICE01 and target form, ZRVINVOICE01. Now press execute button, it will copy the form into 25 languages. Now come back to se71, enter Z-form name and do the required changes.
Hope this hint may help you, Pls close the thread if u met with correct answer.
Regards,
Sujatha.

How to find the standard Layout(Forms) list in India Baseline version

Hi,
Can anyone suggest me how to find the standard layout(forms) in the India baseline version.
i want total standard form(Scripts/Smartforms) name available in India baseline.
Thanks in Advance!!

Hello,
Goto Se710> Do F4 in form. In next screen goto Find->Technical Search function and execute it. It will show no. of forms in the status bar at the bottom.
Cheers,
Balaji

What is the standard print prg for Purchase Order

Hi,
I am working on forms, what is the standard print program for purchase order.
Already i have gone to nace and found that the program assigned to the customized print prg, so i am not able to find out the print program, so can u tell me how to solve it.
Regards,
clara

Here are the default entries in the configuration
NEU     Purchase order     1     SAPFM06P     ENTRY_NEU     MEDRUCK
NEU     Purchase order     2     SAPFM06P     ENTRY_NEU     MEDRUCK
NEU     Purchase order     6     RSNASTED     EDI_PROCESSING
NEU     Purchase order     A     RSNASTED     ALE_PROCESSING
Regards,f
Ravi
Note : Please mark the helpful answers

Standard Driver Program for Sales Order Confirmation

Hi,
My requirement is to develop smartforms and driver program for Sales Order Confirmation.
For doing this, I found there is a standard smartforms R2RBL_SDORC_L for Sales Order Confirmation. So I thought I can take a Z copy of this smartform and modify it to my requirement. So that we can use the Import parameters (Form Interface parameters) of the form R2RBL_SDORC_L. This will also reduce the work of writing the code in Driver program.
Now, I need to know what is the standard driver program for this form R2RBL_SDORC_L. If I can find the program name, I can take a Z copy of that and enhance it to my requirement.
Ultimately I believe I can reduce the work of writing code to fetch all Sales order details.
Can anyone let me know the standard driver program name for the form R2RBL_SDORC_L?

Can anyone share how you approached in developing smartforms and driver program for Sales order confirmation?
Note: This program and smartforms will be assigned in the NACE transaction.

How to add a table layout in CRM Sales order?

dear all ,
anyone know how to add a table layout in CRM sales order customer tab that using the EEWB added?
can EEWB do this? i didn't find the appropriate business object......

Hi , Swapna
is you mail address right? can not send out.
first , you should have added one field using EEWB , then to EEWB , find the extension , double click on the task, there you will find a "object list" on the right, the list will give you many many very important information , you should look through .
then double click on the "screen: ..........EEW......." , layout , there you will find the field you have added in . and you can draw anything you want there , then back to the screen flow , write you flow logic in PBO and PAI .
about the global data definition, again to the "object list", you will find a "Report source code: ......................TOP". in there ,you can define all you data .
another thing if you want to save your input field to database tables that you draw (not by EEWB added)
two ways:
1. write update table directly in PAI module .
2. you can use this BADI : ORDER_SAVE , this is when you save the order to trigger the save action.

How to combine the line items of 2 Sales orders into 1 delivry

how to combine the line items of 2 Sales orders into 1 delivry
and their process, pre-requisites and tcode

The prerequisites are:
1) In the customer master sales area data, shipping tab, there is a field called Order combination. u must tick that.
2) for the two orders, the sold to party & ship to party must be same
3) both orders must have created from same plant & shipping points
4) the line items must have same loading grp.
5) the both orders sheduline line date must be same.
transaction code for the same is VL04.
enter the required data and select the order nos to be processed.
Do reward points if it is useful

How to retrieve the Sapscript layout changes for a particular Transport request in development server after this Transport request so many requests created ?

Dear Abapers,
I request the Abapers kindly reply for this blog
I want to retrieve the sapscript layout changes for a particular transport request in development server after that many transport request created and moved to quality ?
I checked in SE03 transaction the transport request was there. But I want to retrieve the existing transport request which is not moved to Quality?
Is it possible to retrieve the existing transport request in development which is not moved to quality ?
Like how we retrieving the programs using versions in development server, In the same way I want to retrieve the sapscript layout in development server ?
Thanks & Regards
Muzeebur Rahiman.S

Hi,
There is no version management for SapScript or Smartforms .
When you write "transport request in development which is not moved to quality" - was the transport ever released and exported from the development system? If yes, and if the "Transport files" are still available in "Transport directory" (or if the transport files were backed up and could be retrieved), the transport could be imported again. If the TR was not exported, you are out of luck, I believe...
I would not recommend you do it on your own even if you happen to have enough authorizations (consult with Basis and/or Transport Admin, if you have one in your organization). I would not recommend that it's imported on a development system or QA system, even if the transport contains no other objects - only the SapScript form in question. Import it on a "sand-box" that gets overwritten by system copy from time to time... Once the transport is imported, you should have the old version of SapScript in that system and could analyse the changes and perform manual merge.
cheers
Jānis

Standard Webdynpro Component for Sales Order / Quotations ?

Hello Experts,
Is there any standard ABAP Webdynpro Component available for Sales orders / Quotations etc. ?
Else we have to create everything customized for the customers ?
Regards,
Ravi Sharma

LORD_MAINTAIN - for sales order maintenance. Shipped with ERP 6.0 (no enhancement packages required - although there are improvements in the later enhancement packages).

How to retrive the purchase agreement/promotion using sale order number

Hi ,
I am an ABAPER . I need a flow for *sale order to purchase agreement/promotion *
My query is how to retrive the purchase agreement/promotion (VBAK-KNUMA is blank for all ) using sale order number ?
Thanks
Sree
Edited by: Sree Merugu on Sep 11, 2008 6:58 PM

Hi ,
I am an ABAPER . I need a flow for *sale order to purchase agreement/promotion *
My query is how to retrive the purchase agreement/promotion (VBAK-KNUMA is blank for all ) using sale order number ?
Thanks
Sree
Edited by: Sree Merugu on Sep 11, 2008 6:58 PM

What is the IDOC Basic Type for sales order creation

Hi Experts,
Can anyone tell me Idoc Basic type for sales order creation.
Thanks
Prashant

Hi,
The basic types for creating the order are:
1.Orders01
2.Orders02
3.Orders03
4.Orders04
5.Orders05.
The basic type for SIS order is:
SISCSO01.
Regards,
Krishna.

Standard(Smartform) Program for Sales order Confirmation

Hi Experts,
I have a new Requirement on Smartforms,
It is Sales order confirmation, Can Any one say what is Revelant program for this Requirement...
(RVORDER01) is for SAP SCript But i Required Smartform Program..???
Thanks,,
ksreddy.

I Required a program for sales order confirmation ..
Resolved..!!
Thanks,

How to Modify the standard layout set for Sales Order

Similar Messages

Maybe you are looking for