How to monitor message in BPM?

Hi all
I try to find in forums but I did not find. Could you please to guide me how I can to see message content in each step in BPM.
Thanks and Regards
Park

Hi park,
To monitor messages for BPM... got transaction SXMB_MONI_BPE
there u can check each step.....
hey... check the slide....also useful......
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1db5e190-0201-0010-1c90-d9de570c6b18
Regards
Biplab
Reward with point if useful

Similar Messages

How to monitor messages in PI 7.1

Dear SAP,
We are using PI 7.1. We would like to monitor messages in PI 7.1.
There are the RWB in PI 7.1 and the NWAPI in PI 7.11.
Question :
I have a found a guide called "How To ... Monitoring Exchange Infrastructure 3.0)".
This guide can be used to monitor message in XI 3.0 and PI 7.0.
Do you know if there a more recent guide to implement the PI 7.0 monitoring ?
Thanks
Best regards
NetWeaverAdmin

Dear Shabarish,
If I understand you well, even for PI 7.1 EHP1, you recommand to continue to use the RWB to monitor our PI system ?
And we have to wait PI 7.3 to use the NWAPI ?
Is it right ?
Thanks
Best regards
NetWeaverAdmin

How to monitor messages using CIDX Communication Channel

I created a CIDX Communication Channel. XI failed to get a message from the source. How to monitor the messages using CIDX communication channel.

Not sure about the monitoring but u may recheck the communication channel settings as shown:
Sender
http://help.sap.com/saphelp_nw2004s/helpdata/en/0a/512041cfb7f423e10000000a155106/content.htm
Receiver
http://help.sap.com/saphelp_nw2004s/helpdata/en/68/1b20410e91f523e10000000a155106/content.htm
Regards,
Prateek

How to monitor Message Bridge runtime using WLST

Hi Readers,
I would like to monitor Message Bridge runtime on weblogic 8.1 using WLST script.
Can anybody tell if there is any possibility? Is there a MBEAN avaialble for Messaging Bridge.?
Edited by: user13254842 on 09-Sep-2010 23:17

Hi,
I don't recall whether the console provides a way to monitor the bridge, or whether the MessagingBridgeRuntimeMBean hangs off of some parent mbean, but you can obtain arbitrary mbeans using standard JMX query calls.
Some scratch code that I have:
private static MBeanServerConnection getConnection(
    String urlStr,
    String username,
    String password,
    String mbeanServer
) throws Exception {
    // This code implicitly requires weblogic classes to be in the classpath
    // in order to run efficiently, but its possible to get it to work without
    // any WL at all.   See
    //   http://e-docs.bea.com/wls/docs90/jmx/accessWLS.html#1118690
    // The code could be changed to automatically detect if WL is in
    // the classpath, and switch to "iiop" mode if it isn't.
    URI url = new URI(urlStr);
    Hashtable h = new Hashtable();
    h.put(Context.SECURITY_PRINCIPAL, username);
    h.put(Context.SECURITY_CREDENTIALS, password);
    h.put(
      JMXConnectorFactory.PROTOCOL_PROVIDER_PACKAGES,
      JMX_PROTOCOL_PROVIDER
    JMXServiceURL serviceURL = new JMXServiceURL(
       url.getScheme(), url.getHost(), url.getPort(), JMX_JNDI_ROOT + mbeanServe
    JMXConnector connector = JMXConnectorFactory.connect(serviceURL, h);
    return connector.getMBeanServerConnection();
conn = getConnection(url, user, pass, "weblogic.management.mbeanservers.domainruntime")
String type = "JMSServerRuntime";    // not sure may need to add "MBean" or strip off "Runtime", bridge = "MessagingBridgeRuntime"
Set xxx =    conn.queryMBeans(new ObjectName("*:Type=" + type + ",*"), null);Hope this helps,
Tom
Edited by: TomB on Jun 10, 2009 2:57 PM

Monitoring messages for BPM

How do we monitor the messages processed through BPM?
when do we use SXMB_MONI and SXMB_MONI_BPE exactly? which of these used for BPM processes?

Hi,
If you don't SAP Service Market place user Id , then refer this document-
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
If you want to monitor details of the BPM with technical details or workflow log or messages inside the BPM then either you can use SXMB_MONI_BPE or you can go from SXMB_MONI->PE->Technical Details
Regards,
Moorthy

How to Split Message through BPM in 1:n scenario

Hi All,
I have a scenario where i am getting a message in a flat file containing multiple entries .Now i have to read that file and split the input file into number of messages as there are records present in the file through BPM.
how can this be done in simplest possible manner ?
Thanks in advance
Amit

Hi
Try this weblogs:
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
/people/claus.wallacher/blog/2006/06/29/message-splitting-using-the-graphical-mapping-tool
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
br
Dawid

How to monitor messages going out of XI? Kindly help!

Hi Experts,
I have a XI scenario where my IDOC message is going out from XI to TIBCO. I am using the JMS adapter as the receiver here. Once message is sent from XI we don't know if it really reached TIBCO?
How do we monitor such messages?
Basically my requirement is that there should be a email sent to the stakeholder once TIBCO fails to receive the message even though XI has sent. The stakeholder
here is the business who just need to get an email alert. The objective behind this requirement is that, end to end XI scenario can be monitored and business does not have to check XI and TIBCO separately. They will no exactly where is the problem.
How to accomplish this? Please provide suggestions.
Thanks
Gopal

Hi Gopal,
If you have already configured the alert rules then you just need to configure SAP connect and maintain the e-mail address for all the users attached to your alert category. You can go to transaction SU01 and maintain e-mail address for the each user attached to the alert category and the e-mails will automatically be sent if SAP connect is configured.
Refere the link below for SAP connect configuration.
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
You will need to set the flag under the RWB for e-mail as well. You will need to login the RWB for each user and go to Alert Inbox - Personalization. Under the Time-Independent Delivery you will to check the box "Mail" as well.
Also check Michal's blog on Alert Config:-
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Hope this provides you a solution.
Regards.
Praveen

How to monitor messages at BAPI side of integration scenario

Hi all,
In scenarios like Soap -> Abap proxy (XI Adapter), I can monitor both sender and receiver messages on sxmb_moni (on XI side and on ECC side). When the scenario is Soap -> BAPI (RFC Adapter), how can I see the messages in the ECC side?
thanks!
roberti

Hi,
If it is an RFC so it resides at JAVA STACK so u cant see the message at ECC end,Proxy and IDOC u can see there message at ECC side they are on ABAP Stack,u can only see message in SXMB_MONI and in RWB for RFC Adapter.
Regards,
Phani
Reward points if Helpful

How to monitor messages on PI 7.3 AEX

Hi Experts,
We are going to use PI 7.3 with a Java only service (AEX) for our project. While going through the SAP documentation for 7.3, found the following link which mentiones in a Note :
"When you use the Advanced Adapter Engine Extended (AEX), the Runtime Workbench cannot be used for monitoring purposes"
Link : http://help.sap.com/saphelp_nw73/helpdata/en/af/d36bc882e846f29ddef9dc1741527b/frameset.htm
I searched in SDN and service marketplace but could not find any document specific to AEX monitoring only where 7.3 is used as a Java only installation.
Do we need to do the monitoring via Solman only in this case?
Would be helpful if anyone can provide me with any helpful links
Regards
Shiladitya

Hi,
1.Go to Monitoring tab -> Adapter Engine -> Message Monitor.
When accessing Message Monitoring, you initially see an overview of messages according to a time range.
2.Integration Directory offers one-click navigation from Communication Channel editor to the web channel monitoring using new channel PING function. This enables testing a channel in the local channel monitor .
3.Support only Java-based adapter types.
regards,
ganesh.
Edited by: ganesh.nijampudi on Dec 13, 2011 12:56 PM

How to monitor message mapping in BPE

Hello all,
I use an integration process to do several mapping after each other.
When I try to check the result of the first mapping in the BPE Log, I get the message "No message available for slection".
I can open the input message from the Container without any problem. But not the output message.
For both (Input and Output Message) it shows that there is one message.
Do I have to increase the trace level of the BPE? How? (Trace level in SXMB_ADM is 3)
We use 2004s SP12 (new workflow log).
Any help appreciated.
Jürgen

Hi Prabhu,
Thank you for the reply. I know this document, but it doesn't help.
As I described, I know how to check a message mapping in BPE.
But when I try to open the MESSAGE_OUT, as described on page 9
I get an error message "No message available for this selection".
Although it shows that there is one message in the table (MESSAGE_OUT <1 Entry>)
Any other idea?
BR,
Jürgen

How to collect and split messages in BPM

Hi,
I have two scenarios.
In one scenario I have to collect files and send as one file
In second scenario
I have single file and need to split it into several ones.
Pls provide me simple example blogs
Regards

Hi Harry,
what is correlation and why do we need correlation
for N:1 transformation (multiple messages to one message).
Correlation is used when you have multiple recieve steps in the BPM to differentiate each file. Consider your recive step is executed and the BPM is active waiting for the other file to comne in. Before the next file comes in , if another BPM is activated becuase your recived recive1 message. Now, when the next message comes in , how does XI know which BPM instance is to be used.
http://help.sap.com/saphelp_nw04/helpdata/en/a5/64373f7853494fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/6d/94364296f1b26be10000000a155106/content.htm
This blog talks abt it.. i had already posted it
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
Can N:1 be achieved without correlation.
Correlation is used when you have multiple recieve steps in the BPM to differentiate each file.
[Reward if helpful]
Reagrds,
Prateek

How to split messages without using Message split (BPM)

In file to file scenario how to split messages coming from file without using Message split (BPM)

Thank you very much.

How to Monitoring of BPM?

How to Monitoring of BPM?

Hi,
   You can use the following tcodes to monitor BPM.
   1) SXI_CACHE - Check for the Return Code. It should be 0. Otherwise there is some problem in your BPM Scenario.
   2) SXMB_MONI_BPE - Entry point for the following transactions.
          SWF_XI_SWI1
          SWF_XI_SWI14
          SWF_XI_SWI6
          SWF_XI_SWI2_DIAG
          SWF_XI_SWPR
Thanks,
Vivek LR

How to send message/traffic accross VME bus from NI's VME MXI-2 card So I can monitor messages via vmetro card?

Hi,
How to send message/traffic accross VME bus backplane from NI's VME MXI-2 card?
So that I can monitor messages via vmetro card/BusView?
Thanks
DBhagat

Hi Dbhagat,
The VME-MXI-2 card is a type of VME controller, which is used in conjunction with a PCI-MXI-2 card that will be in an external computer. This computer is then able to send and receive messages to other devices on the VME bus, as well as monitor the information on the bus.
Hope this helps!
john
Applications Engineer

Reg: Message and BPM

Hi
I'm having a scenario where i use a JDBC adapter to extract data from a DB. As a result of the query say, 10 rows are returned as message to XI server. I have a transformation (BPM) set and the receiver(target system) is a file. When i open the file to see its contents i can see only the first record been transfered. The mapping part used for the transformation node is having IF condition. But all the fetched records satisfies the conditions in the mapping.
Pls let me know the corrective step.
reg: Prabhu

Hi,
1)Check the input XML i.e all 10 records are coming into XI . This you can check in SXMB_MONI
2) Then you can test the mapping in the integration Reposiotry .. So now you can get if any mapping problem. For this , check is the occurence of target strcuture is 1..n or 0.n
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
3) If mapping is correct , then check the RWB->Message Monitoring->Message Display Tool and check the payload.
4) If this is correct, then check the File COntent Conversion of the Receiver File Adapter.
Hope this helps,
Regards,
Moorthy

How to monitor message in BPM?

Similar Messages

Maybe you are looking for