How to Monitoring of BPM?

How to Monitoring of BPM?

Hi,
   You can use the following tcodes to monitor BPM.
   1) SXI_CACHE - Check for the Return Code. It should be 0. Otherwise there is some problem in your BPM Scenario.
   2) SXMB_MONI_BPE - Entry point for the following transactions.
          SWF_XI_SWI1
•          SWF_XI_SWI14
•          SWF_XI_SWI6
•          SWF_XI_SWI2_DIAG
•          SWF_XI_SWPR
Thanks,
Vivek LR

Similar Messages

  • How to monitor a specific transaction in Solution Manager ?

    Hi all,
    I have configured the Service Level Reporting and it works correctly.
    But i don't know how to monitor a specific transaction like SM21, DB02, FB01N etc... ?
    In the SL Reports configuration steps, we can configure this option : Select Business Processes For SL Report. I did a lot of tests but it does not work.
    Have i to configure the Business Process Monitoring ?
    Thanks.

    Hello,
    it depends a little on what you want to do. If you use the pure CCMS monitoring with the table ALTRAMONI you get average response time per instance and you only get new measurements once the status changes from green to yellow or red.
    In order to get continuous measurements you should look into Business Process Monitoring and the different documentations under https://service.sap.com/bpm --> Media Libary --> Technical Information. E.g. the PDF Setup Guide for Application Monitoring describes this "newer" dialog performance monitor. Probably you have to click on the calendar sheet in the Media Libary to also see older documents as well. As the Business Process Monitoring integrates with BW (there is also a BI Setup Guide in the Media LIbrary) you can get trendlines there. This BW integration also integrates back with SL Reporting.
    Some guidance for SL Reporting is probably given under https://service.sap.com/rkt-solman but I am not 100% sure.
    Best Regards
    Volker

  • Workflow Monitoring in BPM

    Dear friends,
      I am keen to know how to monitor the workflow in  BPM. I mean when we clicl PE IN SXMB _MONI it will open Workflow log.
    I wish to know monitioring process of workflow.

    Hi Karthik,
    If you want to monitor details of the BPM with technical details or workflow log or messages inside the BPM then either you can use SXMB_MONI_BPE or you can go from SXMB_MONI->PE->Technical Details
    Please check the follwoing document.....
    https://websmp208.sap-ag.de/nw-howtoguides
    in this go for " Exchange Infrastructure " & click on " How To Monitor Integration Processes (ccBPM) "
    This is the complete guide for monitoring BPM.
    If you don't SAP Service Market place user Id , then refer this document-
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
    Cheers...
    Vasu
    <b>** REward POints if found useful **</b>

  • How do we test bpm process?

    HI all,
    How do we test bpm process?and plz lemme know more abt this
    regards
    kish

    Hi Kish,
    To have more concise understanding on BPM test check these files:
    Monitoring of Integration Processes:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ab3f538e-0d01-0010-07b7-802c90b67eec
    How To Monitor Integration Proce(ccBPM):
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
    Checklist: Making Correct Use of an Integration Process:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
    Business Process Monitoring Set-up and User Guideline:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5433e4da-0b01-0010-b9a5-d61838eaebbc
    Hope this resolves all ur concerns.
    Regards,
    Subhasha Ranjan

  • How to monitor an application using JMX

    Hi,
    How can I monitor the portal application running on  portal server by using MBeans (JMX)? For this I need to make a connection between my portal application and  MBean class, How to monitor operations? How can I do that? If anybody has come across the same requirement pls explain me with the implementation details.

    Hello,
    I have done that in a project (not Portal, but pure Java Application, should be no difference), working fine.
    The steps are as follows:
    - create MBean Server (e.g. MBeanServerFactory.createMBeanServer("test");)
    - create your MBeans
    - make them accessible to clients (register the MBeans in the server)
    - query them from clients
    see http://java.sun.com/developer/technicalArticles/J2SE/jmx.html
    for very good explanation including sample source code.
    CSY

  • How to monitor OSD TS failure and get alert or report?

    How to monitor OSD TS failure and get some alert or generate an report?
    We have SCCM 2012 R2 CU1 with MDT 2013.
    I have checked the OSD reports in SCCM and everyone is emty, where do SCCM get data to the what to activate?
    (I thinking of "Task Sequence - Deployment Status" reports)
    I am not sure people read report manually or lock at the MDT monitor view. So best I think that generate an email or incident in Service Manager when an TS fails.
    We do have SCOM, SCSM, SCO.
    Is there anyone that can point what way or what option I have?
    /SaiTech

    Specifically you could use this Status Message Query syntax to monitor your Task Sequences for errors:
    select stat.*, ins.*, att1.*, att1.AttributeTime from SMS_StatusMessage as stat left join SMS_StatMsgInsStrings as ins on stat.RecordID = ins.RecordID left join SMS_StatMsgAttributes as att1 on stat.RecordID = att1.RecordID inner join SMS_StatMsgAttributes
    as att2 on stat.RecordID = att2.RecordID where att2.AttributeID = 401 and att2.AttributeValue = "DOJ200A1" and stat.SiteCode = "DOJ" and att2.AttributeTime >= ##PRM:SMS_StatMsgAttributes.AttributeTime## order by att1.AttributeTime desc
    Just replace DOJ200A1 with the Deployment ID of your Task Sequence and DOJ with your SiteCode.
    If you want to generate an alert if the TS fails then you could run a script that calls a utility (or similar) which sends a pre-configured email to a specified address (as an alternative to Torten's response). This could be placed in the built in error
    logging section of the SCCM integrated MDT Task Sequence when it fails which I assume you are using (right at the bottom, called Gather Logs and StateStore on failure).
    There are heaps of ways of generating an email from a TS and controlling error logging just do a search - as you have Service Manager you could even use your instance of Orchestrator and call a run book in your TS which does the email?
    Cheers
    Damon

  • How to monitor disk space in BW

    can some body help me out on the following issues.
    1)How to monitor disk space in BW?
    2)How can I delete Application logs in BW?

    When I research with DB02 transaction code in BW, I encountered following tables having lot of log , please some body can help me, how to delete the following log data?
    ARFCSDATA     ARFC Call Data (Callers)          
    BALDAT          Application Log: Log data     
    BSRWBSTORE     Storage for binary large objects (Excel)

  • How to delete a BPM in SXI_CACHE?

    Hi,
    How to delete a BPM in SXI_CACHE?
    With SXI_CACHE, I have an old BPM which is used instead of another one for the same flow : Idoc DEBMAS06 --> XI.
    The old BPM was deleted in ID but I don't want to delete it in IR.
    Mickael.

    Hi Mickael,
    You can Delete the XML Objects type from the process in transaction "swf_xmp1".
    So the process not longer work in the Workflow Engine.
    Regards,
    Robin

  • How many monitors can you use on a new imac with GEForce 780m?

    My husband bought a new 27" iMac with the optional GEForce 780m with 4 gig of video ram. He wants to know how many monitors he can run simultaneously, and at what resolutions. He would obviously be using the Thunderbolt ports to do this. I thought this information should be easily found in the technical specs for either the iMac or the video card itself on the NVidia site, but it is not.

    Catherine Gramze wrote:
    Ok, rkaufman. Can he use two 4k monitors in addition to his iMac display? He wants to know what his options are in terms of number of monitors and the resolution. Yes, I know which monitor you buy will be the limiting factor for the actual display, but he has not yet purchased these additional monitors. If thunderbolt allows him to run 3840x2160, how many of them can he run at once at 32 bpp? How many if he chooses 2560x1600 instead?
    To be honest I don't know how many Thunderbolt displays he can run, I would STRONGLY recommend contacting Apple to ask. You can ask the online store (phone number is in upper right of it's home page) or if you have an Apple Store in your area, making an appointment with a business specialist and asking that question.

  • How to monitor all SAP Server through solution Manager?

    Dear Friends,
    How to monitor all SAP Server through solution Manager?
    Is it possible if yes then how? Please forward configuration and transaction also.
    Please help me as early as possible..
    Thanks,
    Regards,
    Sachin

    Hi sachin,
    You can monitor your sattilite systems through solution manager.
    If you want to monitor systems in solution manager means you need to configure those systems in solution manager.
    Before including the systems in solution manager we need to create a solution using tcode <b>DSWP</b>.
    After that you can include the systems using tcode <b>SMSY</b>.
    For configuring the systems we have lot of phases its very difficult to explain here.
    Try to login to<b> service.sap.com</b> and <b>help.sap.com</b> find the helpfull guides.
    i hope it will help you.
    any issues post it.
    kiran kumar.v

  • How to monitor oracle 11g database sessions on Windows 2008 server?

    Hi Experts
    How to monitor the Oracle 11g database sessions on Windows 2008 server (other than SQL Developer tool), which procedure or query is taking more time with Java application.

    Recently i found this tool- myorasql on the net to monitor the performence of database, easy to setup and check the performence.  i never tested it but seems impresive.  It is free and i think it would be use ful to you.
    http://myorasql.com/
    You can also use Quest - Toad or sqlplus if you are very good at sql commands and all dictionary tables or OEM/EM grid if it is configured .

  • How to monitor partial payment

    Dear All:
    In my case, I always pay more money for original AR because I forgot partial payment had been done before. How I monitor AR overpayment when past partial payment exist?
    Thanks for the help suggestion first. Sorry for error description above.
    1.first for specific overdue analysis policy of company, we use partial payment.
    2.And then the question comes. According to contract item, we send invoice to customer only once and receive payment in several step. Each time income received, we use partial payment to clear the AR (to relate payment with original AR). But one customer may have some contracts with us, it always pay for all contract in certain amount at one time. We shall manually divide amount for each contract. If user forgot one contract was paid partially before, he may clear the AR totally at sencond time and then the first payment will still outstanding in open item. Finally we can find many partial payments received but can't refered to any invoice.
    So we are finding a way to control AR clearing to check whether partial payment exist and if the total amount is over original invoice it couldn't be cleared.
    Thanks to give me some suggestion.
    Message was edited by:
            Tommy shi
    Message was edited by:
            Tommy shi
    Message was edited by:
            Tommy shi

    Hi...
    You always have the otion of displaying vendor/customer balances(FK10N/FD10N) to find out the balances and the vendor/customer line items(FBL1n/FBL5N)
    When you pay your vendors select residual payment so that the system will select the residual item remaining to be paid to avoid any confusion.
    Its a good business procedure that you should not be paying your vendors more unnecessarily.
    Regards
    Aravind
    Assign points if useful

  • How to monitor MySQL Server installed in Windows Server using Nagios

    You can do this via NSClient as Gary posted. The NSClient is a communications system that allows nagios to send commands to a target system over the nsclient protocol and they are executed on the remote system. You will still have to build some kind of vbscript or plugin to run on the target system to do the actual query to check on mysql.There are other options to. If you enable snmp on your target computer you can use a few nagios plugins to query the snmp agent on the target computer to see if a service is running. To do this via snmp you will need this plugin "check_snmp_process.pl" fromthis site.Your check command will look something like this:check_win_process:= check_snmp_process.pl -H $HOSTADDRESS$ -C "$USER6$" -n "$ARG1$" -w $ARG2$ -c $ARG3$The service definition will be like this:check_win_process!sqlservr!0!0This will check...

    I installed Nagios Core in my Ubuntu workstation 10.04 for me to learn something new in my craft. I use this now to monitor our Windows Server 2008 with MySQL server installed as well as our Datalink Switch (DGS-1210-24). I searched on google on how to monitor a MYSQL server installed in Windows server using Nagios Core but i could not seem to find any. Could anybody who's expert in Nagios give me steps on how to do so. Thanks. All i found in google were steps in monitoring mysql installed in linux and nothing in windows server.
    This topic first appeared in the Spiceworks Community

  • How to monitor RFC processing in XI

    Hi Friends,
    In the IDoc to RFC scenario please tell me How to monitor RFC processing in XI..
    Thanks and Regards
    Sri

    Sri,
      You can monitor in SXI_MONITOR/SXMB_MONI. If its Syncronous then u can see the request and response messages in the above mentioned transaction.
      To get more details you can go for RWB and select ur message and check for audit log's.
    Best regards,
    raj.

  • How to start a BPM process from ERP system

    Hi,
    I created a process in Netweaver Developer Studio with the Process Composer in SAP CE 7.1 BPM, now I want to automatically start the process by saving a SAP document like purchase requisition or purchase order. Therefore I think about implementing a UserExit / Badi or something else.
    The following systems are available in my Landascape:
    - PI 7.1
    - ERP 2005
    - CE 7.1 EHP1 with ESR
    Does someone have an idea how to start the BPM Process or how to trigger start event?
    Greetings,
    Christian

    the process by saving a SAP document like purchase requisition or purchase order.
    Based on your business process, you will have to decide what data should be sent to other system. It could be in the form of Idoc trigger or an RFC calls. If there are non-SAP systems involved, you should be using PI 7.1 too. In that case, you can communicate using Abap proxy call too. For this you may either call an RFC internally in a report and schedule it.
    Regards,
    Prateek

Maybe you are looking for

  • MF70-Plant authorization control object -reg

    Hi, While giving MF70 authorization to user we need to control based on Plant Once i give MF70 t code authorization its authorizing the user all plants by default is there any object to control plant (WERKS) in MF70 ? regards, madhu kiran

  • What is the Battery with a plug in it symbol?

    On the right hand side across from the name of your shuffle (3rd Generation) before the eject button appears a Battery with a plug inside of it, does anyone know what this is?

  • Searching for devices in CM produces varied results

    Hello, Got a strange issue that i need some direction in resolving. When we perform a search for a device in CM using the computer name the device doesn't show up, if i then get the Unique ID using CM support centre and search with that it appears bu

  • Help with placement of div tags

    Hello.  I am sorry to ask what probably is a dumb question, but I'm new, using Dreamweaver CS5, and I need some help.  I'm sure I'll be posting here a few times during this process of building a new site, but I'm hoping it can be a good way for me to

  • Looking for Legacy Forms & Reports Developer 6/6i

    Is there an link to download these older tools? I need to maintain an older client/server application and the CDs for these tools are missing. Thanks, Mike