How to move clip one frame at a time or nudge

Tried searching this, as I'm sure it's basic and in the owner's manual, but I can't find it:
I can't control how far I'm dragging something across the timeline. Can I grab and nudge rather than grab and drag? I'd like to be able to move a clip one frame over.
Thanks.

If there's nothing in the way you can use the [ and ] keys or comma and period. Shift-bracket will move five frames.

Similar Messages

  • Moving clips one frame at a time

    I'm trying to line up some clips to all be the same length and start and end at the same exact time.
    But final cut pro x is making it very difficult for me!
    Is there an easy short-cut to move a clip one frame at a time?
    I want these clips to line up exactly!
    Thank you,

    The way I was doing it was zooming in really close (command +) and then manually moving the clips to line up.
    But comma and period are exactly what I was looking for.
    Thanks!

  • Nudge clip one frame at a time

    I can move my clip one frame over by pressing "Shift" and the > or < key.
    But after I've done that once showing a synch discrepancy of +1 or -1, then next time I do it, the increment is +5 or -5.
    Is this normal? I need to be able to continue moving the clip +1 or -1 frame at a time.
    Thanks for telling me how!
    Roxane

    Use the Trim Forward and Trim Backward buttons (Shift-] and Shift-[) to perform the selected trim operation to the outgoing and incoming clips on either side of the edit point. The inner trim buttons trim an edit point by one frame, while the outer, multi- frame trim buttons adjust edit points by a default duration of five frames. You can perform ripple and roll edits using these buttons while the selected edit plays back, trimming frame by frame while you watch the selected edit loop over and over.
    The number of frames the multi-frame trim buttons add or subtract can be changed in the Editing tab of the User Preferences window.

  • Move the CTI one frame at a time short cut

    Is there a short cut key to move CTI one frame at a time? I am an After Effects guy and very much used to move one frame at time using the shortcut keys. New to Animate CC... I haven't been able to figure out that feature in Animate CC. Any help for this newbie? Thank u. Cheers

    That's how Photoshop's video editor works.  You can adjust only one layer/frame at a time.
    Editing Video in Photoshop CS6 | Understanding Adobe Photoshop CS6 | Adobe TV
    PS. Tell your model to make a cup of tea and apply tea bags to her eyes.
    Nancy O.

  • Playing movie clips one after the other

    Hello, I am trying to figure out how to play several movie clips one after the other. Each clip has animation in it. When I drag the clip on the main timeline the timeline plays the frame but does not play the contents of the movie. how do I get it to play the contents of the first movie then play the contents of the second movie which is in frame 2 and so on?
    Thank you

    do you mean in the authoring environment you don't see nested movieclips play when scrubbing the timeline?  if yes, that cannot be changed.  if you used graphic symbols (instead of movieclips), you can see nested graphics play when scrubbing a parent timeline (if the parent timeline has sufficient frames).

  • How can i slide a sound track one frame at a time in Pre 10

    i do a lot of music videos where i record audio separtly from the video and then sync them and i have a lot of trouble getting them in sync, does anyone have any good tricks to do this? also, can i move said sound track one frame at a time in either direction to help get these tracks to sync up?
    Thanks

    If you zoom to the max, and watch that little TimeCode box (it pops up, when you begin dragging), just look at the last two digits, as those are the Frames. Even with my clumsy hands and fingers, I can nail the displacement to Frame-accurate standards.
    Now, some other NLE's go a step further, in that when the Clip is Selected, one can nudge it along, with modifier keys and the Left-Right Cursor keys. I do not think that has been added to PrE 10, but would be a great Feature Request.
    Good luck,
    Hunt
    [Edit] Well shut my mouth! After you Select the Clip (unlinking with Alt+click, if muxed), just hold down the Alt key, while hitting the Left-Rigt Cursor keys!!!! Forget that Feature Request.
    Message was edited by: Bill Hunt

  • I have an image sequence in JPG and when I select open image sequence, select all does not work and I can only highlight one frame at a time.  I want to import these frames into QT7 to make a time lapse clip.  Any suggestions

    I have an image sequence in JPG that I want to import into quitck time 7 for making a time lapse clip.   It has an option to open the image sequence, but when I do, it only lets me highlight one frame at a time.  The select all option seems to do nothing when I click on it trying to highlight all the frames. 
          If QT7 is not designed to perform this function, is there another alternative?   iMovie is non intuitive for this kind of operation and I cannot find a clear tutorial for using it to make time lapse clips from a sequence of still frames.  
           The tutorials Ive found on YouTube are well intended, but they all seem to leave out a vital step that eludes detection.  
      Anyway, any help appreciated. 
    Thanks
       I am new to this forum and I'm not sure I can locate this thread again once I'm out of it.
    <Email Edited by Host>

      Yes, I tried that.   The files were ordered by their original numbers as imported from the camera, but I batched them through Phocoshop to downsize all of them into a more manageable file size.   I opened that destination folder from quick time  from where it said select image sequence.   I clicked on the first one and opened it.   The result was a large image with an arrow indicating a movie was ready to go.   When I pressed the arrow, though, I realized it had only imported that one frame so there was no movie.   The files are Jpgs and are about 450 KB each. 
        To your knowledge are there any links to iMovie tutorials or quick time tutorials that may address this situation?  Maybe there will be one I haven't looked at yet. 
        Thanks

  • Took a video rather than still pic by mistake.  How do I print one frame?

    Took a video by mistake instead of a single pic.  How do I print one frame?

    There are apps such as Video 2 Photo (I haven't tried it) that apparently allow you to extract frames from a video

  • AS3 How reload Movie Clip.

    hi,
    1,How reload Movie Clip...?
    2,i think when we remove a Movie Clip,children and all instance object are also removed  from stage but it still use memory of server..right..?

    1.  how'd you load the movieclip to start.  (ie, copy and paste the relevant code, ONLY.)
    2.  readying displayobjects for gc (so they're no longer using memory) requires removing from the display list, removing all listeners and nulling all references.

  • HOW TO MOVE FROM ONE JSP TO ANOTHER BY HIDING URL CHANGES

    HOW TO MOVE FROM ONE JSP TO ANOTHER BY HIDING URL CHANGES IN AN ADDRESS BAR

    Please check before posting that you have not accidentally turned on the CAPS LOCK feature of your keyboard.
    To answer your question. You can't do that. There are alterate ways to solve this sort of problem. What exactly is the nature of the problem you are seeking to solve?

  • Moving Timeline one frame at a time on Premiere 6.0

    Using Premiere 6.0 on a Mac G4, with OS 10.3.9, I want to move a video clip, Lt or Rt. one frame at a time so I can line it up with clips above or below it ..
    Any suggestions ???
    Peter S.

    You might have better luck in the Premiere Forum a few doors down.

  • Saving one frame at a time?

    Cheers!
    I am using Low-level Grab Raw Data.vi example from NI-IMAQ. I want to save one frame at a time and then set the file position to end (and maybe add some mark that I recognize where the next frame begins). I know that it copies the raw data of the specified frame into Image Data Array. But does it write (in this example) data of one frame to disk and then set file position to end? If not, how to modify it?
    How does changing number of buffer affect? I mean if I increase it >1 does it affect to number of frames to write per one iteration time of while loop?
    I have Pixelink PL-B741F-BL camera. http://www.pixelink.com/products_info.asp?productc​ode=PL-B741F-BL&f-category=CMOS%20Imaging%20Module​...
    Kudos for good help!
    Jick
    Attachments:
    Low-Level Grab Raw Data.vi ‏45 KB

    LH,
    You may (you can see Groups in the Layers palette with the layer expanded):
    1) Ctrl/Cmd+A to select everything and Ctrl/Cmd+Shift+G to Ungroup ;
    2) ShiftClick the circle to deselect it; if it is still a Group (all of its own), Ungroup again;
    3) With the Centre Reference Point ticked in the Transform palette multiply the W or H value by 1.1 (just add *1.1 in the box) and Ctrl/CmdEnter to keep proportions (this is to make sure that they are long enough);
    4) Ctrl/Cmd+A to select everything again and Pathfinder>Divide (this will make pie pieces);
    5) Drag over the centre with the Direct Selection Tool and press Delete (this will rid you of the inner parts of the pie pieces so you just have the outer rim in pieces).
    This should give you the 30 independent curved lines forming the circle, two of them with an extra (original) Anchor Point.

  • How do I restore one contact from my Time Machine?

    How do I restore one contact from my Time Machine?

    From Time Machine Help:
    Restore items backed up with Time Machine
    If you use Time Machine to back up your Mac, you can easily bring back lost items or recover older versions of files.
    You can use Time Machine within many apps. If the iCloud Documents & Data feature is turned on, you can recover older versions of iCloud documents as well as regular documents.
    Open a window for the item you want to restore.For example, if you accidentally deleted a file from your Documents folder, open the Documents folder. To recover an email message, open your inbox in Mail. To recover an iCloud document, open the document’s app, choose File > Open, then click iCloud to view the iCloud documents for that app.
    If you’re missing an item from the desktop, you don’t need to open a window.
    From the Time Machine menu in the menu bar, choose Enter Time Machine. A message may appear while your Mac connects to the backup disk.
    Use the arrows and timeline to browse the snapshots and backups.White tick marks represent snapshots stored on your internal drive (portable computers only). Pink tick marks represent backups stored on your backup disk. If a tick mark appears dimmed or grayed, there’s no backup available or the backup disk is not connected.
    For more information about an item, double-click it.The windows in Time Machine behave just like Finder windows, so you can open folders, click items in the sidebar, and use the search field in the upper-right corner of the window.
    When you find the item you want to restore, select it, then click Restore. You can restore individual items, multiple items, folders, or your entire hard disk.The restored item is returned to its original location. For example, if the item was found in the Documents folder, it is returned to the Documents folder.
    Many apps let you use Time Machine within individual documents so you can examine and read the document’s past versions to find the version you want. For more information, see:
    View and restore past versions of documents
    RELATED TOPICSRecover items using Time Machine and Spotlight
    Recover your entire system
    Revert to a previous OS X version
    Use multiple backup disks
    Time Machine overview
    Time Machine problems

  • How do I fade one frame into another?

    In Flash pro 4 how do I fade out of one keyframe and fade into the next one with a slow transition? thanks.

    Try this set alpha to 0. Move ahead 20 frames or how fast or slow you want it.Change the alpha to 100%.Then create  motion tween in the button symbol and place the movie clip in the over state.
    Then it should fade as the movie plays.You can implement it the way you want it.
    Hope this helps
    Good Luck!

  • Making a button rollover change a movie clip's frame

    Hi again everyone,
    I knew how to do this in AS2 but now I am having problems
    with making a button on the stage goto a frame in a movie clip on
    the stage.
    I've attached a sample of my code below, hopefully you'll see
    the error and be able to point it out to me?
    I have a movie clip on the stage that has different
    information in different frames. I want to make it so that when
    someone rolls over the button, the movie clip fades in and goes to
    the correct frame to display the information.
    With this setup the way it is below, I keep getting "Warning:
    3590: void used where a Boolean value was expected. The expression
    will be type coerced to Boolean.
    I know where the problem is happening, "function
    XXX(event:MouseEvent):void {navigateToURL(XXXweb)}"
    How can I write this differently and eliminate this problem?
    Thanks,
    Jeremiah

    I'll give that a shot, thanks!
    A follow up question to that one, is there a way to make it
    so that I can have one rolled over function applied to several
    buttons / frames in the movie clip? This movie clip has 50+ frames
    in it and if I could reduce my coding, it would make life a lot
    easier.
    Thanks,
    Jeremiah

Maybe you are looking for