How to move the process chain from Unassigned node to a new node in 3.5?
Hi all,
I have created a new process chain in the development and it is falling under the Unassigned nodes. I want to move that process chain to an another node. but i am unable to do that
Can anyone let me know how to move the process chain from unassigned node. I have drag and dropped but still the same in BW 3.5 ?
Thanks
Poooja
Hello,
Try this....
Double click on your process chain. Via the menu select:
Process chain > Attributes > Display components
Select F4 (possible entries)
At the bottom of the window you will find a create icon
to make your own component.
After you created it, assign it to your process chain.
Don't forget to save the process chain.
Regards,
Sivaram
Similar Messages
-
How to move a Process Chain from one old node to a new node?
Hi,
i know the method to move a PC from one node to the other!
but what if the target node is a new one?
how can i create a node in RSPC?
Rajuse the display components button.
push F4
hit the create button
enter the discription
save
refresh
M. -
How to trigger the Process Chains in BI from ECC
HI Friends,
Can let me know How to trigger the Process Chains in BI from ECC. Please let me know.........Hi,
1) Define a Custom ABAP Program (eg : Z_EVENT_RAISE)..........call the FM : BP_EVENT_RAISE or RSSM_EVENT_RAISE..........and trigger an event towards BW .........specify BW as RFC destination...........
2) Create a R/3 Job in SM36>> use the Program Z_EVENT_RAISE ......
3) In BW schedule the PC..........and in the Start variant use this Event..........
http://sapbiwtutorials.blogspot.com/2009/03/how-to-trigger-process-chains-in-bw.html
It can be help full
Regards,
Edited by: subba2010 on Aug 19, 2010 6:51 AM -
HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING IN THE PRODUCTION?
HI ALL,
CAN ANYONE TELL ME HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING DAILY AT 5.00 PM. I NEED TO STOP THE PROCESS CHAIN FOR COUPLE OF DAYS AND THEN RESTART IT AGAIN.
cAN ANYONE TELL ME THE PROCEDURE TO STOP THE ENTIRE PROCESS CHAIN RUNNING IN THE PRODUCTION.
THANKS
HARITHAHi,
First and foremost let me advice you to be very careful while doing this.
For Rescheduling
RSPC> chain > Goto > Planning view and
click on Execution tab > select > Remove from Schedule and then in Maintain variant of start process reschedule for the day you require it to run.
For terminating active chain
You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
The next step will be to go to targets that you were loading and remove the red requests from those targets.
Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
Re: Kill a Job
Re: Killing a process chain.
Regards,
JituK -
How to schedule the process chain
hi
guys,
how to schedule the process chain to run on thirsday and friday b/w 8pm to 11:55pm which has already been scheduled for daily loads at 9am to 11am?
(Tell me the answer in detail)
your regards
sureshHi Suresh,
If you want to change in the Production system, you may not have the Authorizations. If you have authorization;
1. Goto RSPC-->double click on the Process chain
2. double click on the Start variant of the process chain-->Click on the EDIT button
3. Click on the CHANGE SELECTIONS then click on the DATE/TIME Tab;
4. There pls give from which date this process chain has to run to with your requirement time,
then give the time and select the periodic job and select with your requirement.
Save and exit.
It is done!!
Hope you understood.
Regards,
Ravi Kanth -
How to schedule the process chain fr the report
hai experts,
i have a query which i need to generate for every five hours? i know that we can generate the report thr process chain but i dont know how to build that..
my question is how to schedule the report,how to build the process chain,....
can any one plz tell me how to start this generating report for every five hours
thanks in advance..points will be alloted surely ,i need this urgently..
SuriFirst of all you need to Identify the InfoObjects if you want to take up Master Data Loads, and if you want take up transaction loads then select the Data Targets to which the data has to be updated. Then plan the dataflow accordingly.
You want to create a Process Chain, Go to RSPC, and then select the create option and from the Process categories available on the left handside drag and drop the Start process, then define the Variant for the same. In the same way you need to identify the other Process Types available on the lefthand side. For Eg: Start Process>Load to ODS>Activation of ODS Data>Delete Indexes for the InfoCube>Load to InfoCube>Create Indexes>Delete Overlapping Req-->Agg. Rollup.
This is how you need to specify the dataflow, several other Process Types also included based on the requirement For Eg: Sending Mail Alerts when the Job is Success or Terminated.
Also, have a look at this links to make urself clear about the steps in creating Process Chain.
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
Hope it helps.
Regards,
Archna -
How to stop the process chain showing status as yellow but no process step
Dear Friends,
How to stop the process chain showing status as yellow but no process step is running in that process chain.
We have manually triggered the process chain for sales it finished successfully till load data but the next step is create index and DB statistics. Both of this steps are in unscheduled position only and no background job for this.
Please guide me.
Thanking you in advance.
Regards,
ShubhangiHi,
At times even I have faced this situation. During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
Regards,
Raj -
How to test the process chains
hi sap gurus,
Can anybody tell me how to test the Process chains before i load real time data,i run process chains every morning 6.15 am,before that i want to test every process is linked to another.
thanks in advance.Hi,
Scheduling the process is the only way to check whether it is running fine or not. The process chains should be checked first in the Dev server and then in the QA server before transported to Prod.
You can also check the process chain using the "check" button to see if the processes are in the proper sequence or not.
There is a "log" button to keep track of the progress of the chain
suresh -
How to know the process chain start time & end time?
HI all .
how to know the process chain start time & end time at the table level as well as in RSPC level .
regards,
SrinivasHello,
there is a program "/ssa/bwt" which will help you to know the exact time when the process was started and ended.
but the thing is you have to provide name of the process chain with the date at which it was executed.
another option is - you can double click on start process and on the last process of the chain.
here, you will get both the timings... Start time of the start process will be the start time of your PC and end time of the last process in the chain will be end time of your PC.
Hope this will help you. -
How to know the process chain start time and end time
Hi Experts,
How to know the process chain start time and end time .
Thanks in advance
Regards
Gutti
Edited by: guttireddy on Feb 23, 2012 11:30 PMHi Reddy,
You may find the run time of a PC using below steps.
1. Call SE38 > /SSA/BWT > Execute > Enter your PC , choose the date and time > Execute. Here Run-time of a PC is displayed. (or)
2. Call RSPC1 > Enter your PC > Execute > Goto Log view > Right click on the start Variant > Displaying Messages > Note down the start time in Chain Tab. Now Right click on the last Process type of the PC > Displaying Messages > Note down the End time in Chain Tab. The Difference b/w start time and end time gives the Run-time of your PC.
Hope this helps.
Regards
Sai -
hi,
I have question how to kill the process chain during running.
thank you.Hi
If the process chain is running in background,
goto <b>SM37</b>
Give * in the jobname
Give the username who scheduled the process chain
Job status - check the check boxes - SCHED, relased, ready, active
click <b>execute</b>.
It displays all the process chains that, scheduled & running.
You can select the process chain that need to be stopped & click STOP active job or ctrl+F1.
Hope this helps!
Kindly award points for all useful answers.
If you post the BW related queries in the <b>BI general</b> forum, you will get more answers.
Best regards,
Thangesh -
How to get the process chain name if we know the data target in sap bi
Hi SAP BI Gurus,
Can any help me how to find the process chain name if we know the data target name
i mean if i know the info cube name how to find the relavant process chain which is holding that info cube
Thanks,
JoeHi R Kumar,
Check the table RSPCCHAIN.
I mean, Use Table RSPCCHAIN and give the local chain tech name in VARIANTE field and search, in out put you will get meta chain name under the field CHAIN_ID.
Thanks,
Sreehari. -
How to reuse the process chain which has been deleted?
hi
guys
how to reuse the process chain which has been deleted?
your regards
sureshif you want to "recover" the deleted process chain, try to check DEV / QAS / PRD. Maybe there is a copy still available
Or check the following tables in SE11: RSPCCHAIN / RSPCCHAINATTR
Good luck ! -
How to run the process chain immediately?
Hi experts,
I'm a beginner for this field, Suppose there is a process chain called "X" which is used to extract the data from SAP R3 side for the purpose of getting the data for BI query called "Q1". "X" has been schedule to run every day in the night in BI side and also there are jobs have been schedule in SAP R3 by using the T-code lbwe. (they also runs once per day in the night)
According to above explanation, If I execute the BI Query today, I can view only up to yesterday data. Suppose I have updated some data in the tables at SAP R3 side today. therefore immediately I want to see the changes when I execute the BI query...
Can you explain me how can I do this? Please explain this in Step by step if you can.
Thanks,
Regards,
Nimesha.HI ,
If u want to schedule the PC immediately, then go to the change mode of the process chain and double click on the start process select immediate button so that the process chain will run immediately after scheduling the PC.
What job would u like to run in R/3 ? Is it V3 to move the records from the queue delta / unserialized v3 update to delta queue, if so then go to LBWE --->job control and do the setting there.
Note: U may get one box for o/ p device then type LP01 or ask the BASIS TEAM .
Hope u got it,
Thanx &Regards,
RaviChandra -
How to Stop the process chain if it in the middle of the process?
Hi,
Is there anyway that i can stop the process chain if it is in the middle of the process already?
Raj"Hi,
First and foremost let me advice you to be very careful while doing this.
You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
The next step will be to go to targets that you were loading and remove the red requests from those targets.
Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
Different Ways to stop process chain
1)SM37 -->Kill Job
2)SM50/sm66- ->Kill process
3)RSPC>Job Log>Make the process RED forecefully.
4)RSPC>Process chain> main Menu"Remove from Scheduling" OR
5)se37-->RSPC_API_CHAIN_INTERRUPT
give RFC BW system name(technical) and process chain name(technical)
Steps 1 -3 stops the chain running in process
Steps 4-5 stops the chain AFTER the current job which is running is completed as sucessful or Failure by nature.
Rationale - 4-5
This function will only remove the jobs from schedule, which did not yet run. It will not kill running jobs, as this may leave the system in an inconsistent state, moreover killing processes is possible for synchronous processes only anyhow. This means, that there will be no errors with interrupted chains, which on the other
hand means an interrupted chain is not restartable. So for a running chain this function is intended to be an emergency break only. You can use it, however, to remove a scheduled chain from schedule, such that it does not start except by your product.
Re: Kill a Job
Re: Killing a process chain.
How to stop a process in a process chain?
Regards,
JituK
Maybe you are looking for
-
How do you get your experts with negative stance for new things / innovations to HANA
We have over 50 ABAP developer (senior experts). Primarily we develop in the old core module (SD, MM, FI, CO, HR, PP, CS, IH, PS) on ERP systems / business suite. We have three groups of developer: Group 1: They can’t await to work on new architectur
-
Configure DHCP to add non domain computers to DNS
Hi We would like to add non domain computers automaticallly to DNS through our DHCP server. The reason is that we actally use Linux and our Linux admins would like the machines automatically to DNS when receiving a IP. I assumed that it was just a ma
-
Worthwhile help from FCP veterans...
I spent 2 hours reading posts, in an attempt to solve a recurring problem I have...A final product, that when burned to DVD, looks like a pile of dog doo. Incidently, searching "dog doo" returns no posts Video editing is a hobby, and one that has lim
-
My iPad2 went blank. Troubleshooter says driver software MTP USB problem, what do I need to do?
-
How to set the BDC Call transaction Program in Background
Hi All, I have a requirement. If i execute a BDC Call Transaction Program in Background it is showing 0 seconds means it is not executing. Normally it is working properly. If execute in background it is not executing. But my client wnats to e