How to move Wifi Router

Hello, I am wondering how to move my M1424WR Wifi router. It does not reach some places of my house because the Verizon man who installed it put it in a corner in my basement. It uses a power cord and a coax cord which connects to a splitter. Then the splitter connects to the Verizon white box. I was wondering if I was to move it to a better location where to plug the COAX cord into. 
Any help would be very appreciated, thanks. 

muelldog wrote:
Hello, I am wondering how to move my M1424WR Wifi router. It does not reach some places of my house because the Verizon man who installed it put it in a corner in my basement. It uses a power cord and a coax cord which connects to a splitter. Then the splitter connects to the Verizon white box. I was wondering if I was to move it to a better location where to plug the COAX cord into. 
Any help would be very appreciated, thanks. 
You can connect to any COAX that comes from your ONT.   If you have FiOS TV you can use a splitter and connect there.  Or run an additional COAX from an existing line to where you want your router.

Similar Messages

  • I use a SpeedPort W700V as WiFi Router. SpeedPort encrypt the WiFi data and iPAD doesn't deencrypt the WiFi data. How to initialize the Encrypt / Deencrypt function of iPAD ? (including shared keys)

    I use SpeedPort W700V from German Telekom as router for my WiFi and DSL access. DSL connection to Internet is proper running, WiFi with iPAS does only work if I switch of the Encryption mode of SpeedPort (Standard parameter in SpeedPort is WPA2 with shared key PSK).  Who can give a hint how to switch on the encryption / deencryption mode of iPAD 2. 3G Sim Card is currently not installed.

    Thanks for the quick response. No, I did not get any error messages or any terms-of-usage screen. The employee I told my problem to was not computer savvy either. She just suggested I move to different spots w/in the library to see if that would make a difference. It didn't. When I connected to the library WiFi it did change the Verizon 3G that is usually in the upper left corner to iPad with two to three emanating arcs. I may have to go to the library in the next town. I was able to connect to theirs in the past when I had to download something greater than 20 MB. Unless I really want it, I will probably not even try to download something more than 20 MB due to the hassle. Yeah, I may have been better off getting a normal desktop or laptop and getting WiFi at home. To do that now would mean having my iPad 2 and a desktop computer, which I feel is extravagant. (I know there are a lot of big spenders out there who got the iPad as additional gadget for fun. This is a rich country.) A Verizon rep told me I couldn't set up a WiFi router at home just using an iPad. So it seems like a person who just uses 3G is limited to surfing the net (not even much YouTube because it eats a lot of data) and using email. I read about an app that helps print wirelessly using 3G, but a reviewer said you had to be an engineer to get it done right. BTW, I like the Steelers. I'm old enough to remember Franco Harris and that blond guy whose name escapes me back in the '70s. Since I live in North Jersey I feel I have to support the Giants. But I know football about as well as computers.

  • How can I tell Apple to store my MAC-address of my Wifi Router in there location DB?

    Hello
    Recently I bought a new Wifi Router and when I use the Maps App it tells that my ipad is located in China (Shangai)
    When I also want to use the automatic timezone feature in the preferences app it indicates that my ipad is in China (Shangai)
    I have already searched for a number of discussions (in and out the Apple Support) and their I found that the problem is in a location DB managed by Apple (crowd-sourced database). It seems that my Wifi Router is registered with a wrong location. :-(
    my questions :
    .- is the somebody that can give me a procedure (certified by Apple) how I can update this location DB?
    .- How can I store my Wifi Router MAC address with the correct location in this DB?
    Already thanks in advance
    Kindly regards
    P@nt@ni

    try this
    http://www.skyhookwireless.com/howitworks/submit_ap.php

  • I am trying to connect my server using an Ethernet to router and want to search the internet using another wifi router. How can I accomplish this?

    I have a small storage server and want to connect to it via Ethernet.  I also want to connect the internet using a separate Wifi router from my provider.  How can I do both?

    Set the service order to have wifi first.
    System Preferences > Network > Click on the gear > Set Service order

  • How is easy is to setup Time Capsule as a wifi router

    How easy is it to setup Time Capsule as a wifi router?

    The following would be the basic setup steps for the Time Capsule (TC):
    Modem/Router Power ReCycling
    o Power-off the Cable modem, TC, & computer(s); Wait at least 30 minutes.
    o Power-on the Cable modem; Wait at least 15 minutes.
    o Power-on the TC; Wait at least 5 minutes.
    o Power-on the computer(s)
    Either connect to the TC's wireless network or, temporarily, connect your computer directly (using an Ethernet cable) to one of the LAN ports of the TC, and then, using the AirPort Utility in Manual Mode, check these settings:
    AirPort - Base Station
    o Base Station Name: <whatever you wish or use the default>
    o Base Station Password: (optional)
    o Contact: (optional)
    o Location: (optional)
    o Set time automatically (optional)
    o Time Zone: <select your time zone>
    o Status Light: Always On (Default)
    o Allow configuration over Ethernet WAN port (unchecked)
    o Advertise configuration globally using Bonjour (unchecked)
    AirPort - Wireless
    o Wireless Mode: Create a wireless network
    o Network Name: <whatever you wish or use the default>
    o Allow this network to be extended (unchecked)
    o Radio Mode: 802.11n (802.11b/g compatible)
    o Channel: Automatic
    o Wireless Security: None
    AirPort - Wireless - Wireless Options
    o Region: <select your region>
    o Multicast Rate: 2 Mbps
    o Transmit Power: 100%
    o Create a closed network (unchecked)
    o Use interference robustness (unchecked)
    Internet - Internet Connection
    o Connect Using: Ethernet
    o Configure IPv4: Using DHCP
    o IP Address: <provided by your ISP>
    o Subnet Mask: <provided by your ISP>
    o Router Address: <provided by your ISP>
    o DNS Server(s): <provided by your ISP>
    o Domain Name: <provided by your ISP>
    o DHCP Client ID: (optional)
    o Ethernet WAN Port: Automatic (Default)
    o Connection Sharing: Share a public IP address
    Internet - DHCP
    o DHCP Range: 10.0 1.x
    o DHCP Beginning Address: 10.0.1.2
    o DHCP Ending Address: 10.0.1.200
    o DHCP Lease: 4 hours
    o DHCP Message: (optional)
    o LDAP Server: (optional)
    o DHCP Reservations: (optional)
    Internet - NAT
    o Enable default host at: (leave blank)
    o Enable NAT Port Mapping Protocol (checked)
    Once you have verified Internet access, I strongly suggest that you use wireless encryption (WPA or WPA2) to secure your network.

  • How to access hard disk connected to wifi router?

    Hi,
    I have a hard disk connected to a Wifi router (Huawei B593) how can I access the had disk from my MacBook Air?

    Try the File Explorer App in the App Store.
    https://itunes.apple.com/us/app/fileexplorer/id499470113?mt=8

  • TS2370 My iPhone detects my my Belkin G5 series wifi router but not connecting, I searched in internet and found many people have similar experience. Please tell , how can I fix it?.

    My iPhone detects my my Belkin G5 series wifi router but not connecting, I searched in internet and found many people have similar experience. Please tell , how can I fix it?.

    Try rebooting the router. Just remove the power for a few seconds. No settings are lost.

  • How do I set up Express box as addition to existing WIFI router?

    Used to be able to do this when setting up the Express box, as I did years ago at home. But there's no option in the install process to enable this - which renders the product pretty useless.
    Any ideas?
    Cheers
    Neil

    Hi Bob
    thanks for getting responding to my request.
    When I originally set up Airport express network at home, the set up software gave a couple of options, to either be a stand alone wifi node, or be added to existing router - not necessariy an Apple one - I have a Netgear router at home. This was a decade or so ago.
    We recently bought Airport Express box for the office as we want to stream music to it and the set uo software has changed in that it insists the Airport Express box is connected to a router with a cable - which defeats the point of a WIFI product.
    So - my question was how to do this as it is insane that a wifi box cannot connect via wifi to a wifi router.
    However we found a solution by using the Apple Remote app to set up the Airport Express box so that it has been added to the Netgear router we have in the office.
    So - it turns out you can connect an Apple Airport express box wirelessly to a non Apple wireless router, but not with Apple Airport assistant utility - you have to use Remote on an iPhone.
    This isn't how I'd configure the products, but hey, what do I know?
    Cheers
    N

  • Any suggestions on how to get wifi to work?  I have a multitech router and can connect with a computer wirelessly but not the ipad.

    Any suggestions on how to get wifi to work?  I have a multitech router and can connect with a computer wirelessly but not the ipad.

    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398

  • How to Turn your iPad into a WiFi router for your laptop?

    how to Turn my iPad into a WiFi router for your laptop?

    Chris CA wrote:
    iPads have no tethering abilities either.
    I know, but I still don't know what the OP was asking.

  • Selling wife's mac - how to move all her stuff to sub-account on my iMac?

    Selling wife's MacBook - how do I move all her stuff to sub-account on my iMac, so that when she logs into her user account, it looks and feels exactly like she was on her MacBook? Needs to sync her iPad to her own library of apps & music, needs to have her documents lined up in the exact folder structure, her photos in iPhoto, etc... basically, logging into her user account on my iMac needs to feel to her exactly like she was using her MacBook. iMac and MacBook are both running 10.6.6. I've found discussion forums about how to move stuff from user folders around on the same computer, how to restore a hard drive from a backup... not sure how to do the specific move I'm talking about here. I'm basically trying to take an entire harddrive backup and make it into it's own user account on a different machine.
    I've started by running a backup through SuperDuper. What next? Any ideas? Thanks!

    Shutdown the MacBook, connect it to the iMac via Firewire, and start it up holding down the t key.
    If you don't have a firewire cable to connect the two, you can do it over the network, it will just be slower.
    On the iMac, run Migration Assisstant and migrate her account from the MacBook to your iMac. Just migrate her user account. MA will create an identical copy of her account on your iMac.
    You could also migrate from the clone you made with SuperDuper.

  • Well I bought a WiFi router. How to connect old Macs and other things??

    Hi,
    I purchased a WiFi router mainly for my PSP but I also want to connect my Macs wirelessly to my router. What older Macs can connect to it and how? What other stuff can connect to it?
    Thanks

    In about an hour AR is going to start complaining about the cost being too high and wanting cheaper alternatives. The solution to each situation exceeds the value of the computers themselves. Don't bother asking if there is another less expensive way to do it because there is not.
    Expect to pay at least $50 for one.
    For the 8600 there's also a Belkin USB adapter that has OS 9 drivers and I believe there are PCI card wireless adapters that work under OS9 as well (although I can't recall which ones).
    *Proxim Skyline PCI wireless card, that is what WAS sold and worked in 8.6-9.x - they are no longer made and the company was taken over by a larger one that stopped all Mac related support so no new drivers were made.
    *Belkin has drivers for the F5D6050 USB device. They are OK, but not as reliable as one would want. Relative to each other the OSX drivers are better than the OS9 ones.
    *Smart money would buy a wireless bridge.

  • My iphone 5 does not remember the password of my home network. Well this is ot the case with my ipad. The wifi gets disconnected every 2 minutes. Its not any problem with my wifi router as my ipad and other devices work fine. So how do i fix this problem?

    Well my iphone 5 does not remember my home network. This is not a problem with the wifi router as the ipad works absolutely fine. The wifi loses it connection in just 2 minutes. So could you please fix this problem.

    Not unless the modem is causing a problem.
    What you want to do is get it to work reliably over Ethernet first, then tackle wifi. Power off the modem. On your macbook, delete the Ethernet configuration and the Wifi configuration. Power up the modem, then connect the mac via Ethernet. Create the new Ethernet configuration and see if you can connect.

  • How to create extend network through existing wifi router-Belkin N150

    Dear sir,
    I like to inform you that customer are using belkin N150 wifi router in his room( For wifi) but he want to extend his network with the help of airport express through existing network (wifi).Is it possible to extend network by the airport express?Please give the suggestion or step to configure the airport express through existing WIFI network.
    I am waiting for your reply as earliest.
    Thanks,
    Dipankar Das

    .Is it possible to extend network by the airport express?
    Yes, if the AirPort Expess will connect to the Belkin router using a permanent wired Ethernet cable connection.
    No, if you want the AirPort Express to connect to the Belkin router using wireless.
    If you want to extend using wireless, then use another Belkin product, which will be compatible with your Belkin router.

  • How to talk to my wifi router using tcp(?) functions?

    Hello All,
    this is what I'd like to do: use the Labwin. CVI environment to log onto my wifi router,  pass user ID/password, then ask questions from router the answer to which I'd like to analyze (for example get visited URL addresses, etc.). Is this possible to do using e.g. the TCP functions of CVI?  I checked out the sample codes came with CVI but there CVI created client talks to CVI created server... I greatly appreciate any help. Cheers. kosamici

    Hello KyleP,
    thanks for your reply. It definitely looks like the application you suggested will take me along the direction I am heading.  I'd like to complete the whole exercise and try to modify from there... So in the description I read that this app will get stock prices from some google webservice and I need to get license to be able to use it...
    In the .c file, however, the description talks about google's spell checker service...?
    Also when I go to  http://www.google.com/apis/,    the  http://code.google.com/ site comes up and I do not know where to go from there....
    Sby was asking about the gui, but it look like this app just communicates through the standard console, right?
    Thanks again.
    Kosamici

Maybe you are looking for

  • CAD "Select reason for not ready" not appearing for some agents? Please help!

    Hi all, I have some users who when they click on 'Not Ready' in CAD (Cisco Agent Desktop) - they are not presented with the 'Select Reason for Not Ready' dialog box - it just goes straight to Not Ready. I have searched high and low but have not found

  • BlackBerry Maps on Torch 9810

    I just upgraded from a Torch 9800 to Torch 9810. When I open BlackBerry Maps I shows my current location but the BB button the return key don't do anything. On the touch screen the search and Get directions don't do anything either. I uninstalled the

  • How to decide component size to contain all data?

    Hi, all My application has some jtable and jtextarea which always contained in jscrollpane, not because what I need but because I don't have a idea to determine size for my component. Let's say my jtable has 30 rows, I know how to control width for c

  • BW Variable Customer Exit I_STEP 3

    Can anyone tell me under what circumstances I_STEP 3 is called to validate a variable input. Thank you, Beat

  • SRM 7.0 course codes for Associate level certification

    Hi I would like to go SAP SRM 7.0 Associate level certification, kindly let me know the course codes for SRM 7.0 certification. currently, i have read SRM.1, SRM 210, SRM 200 & SRM 270 are these manuals are sufficient for SRM 7.0 Associate level cert