How to open a RAW file that has been created with Photoshop CS5.5?

I did some HDRs and when back in Photoshop CS 5.5 I tried to save them (16 bit colur depth).
GIven the option to save the image as .RAW file I did that but now:
Which program can be used to open those Photoshop created RAW files???
When I try to open one of these files with Photoshop I just get noise.

1.  Photoshop CAN open (flat) PSD files through Camera Raw, no problem.
2. There are those of us who have used every version of Photoshop, going back almost 20 years, and who *still* haven't used them all.  I just don't see that as any kind of problem. 
3. Lastly:  You have been asserting here all along that Photoshop won't re-open a 16 bit .raw file properly.  That's absolutely wrong.  If you get the bit depth, number of channels, and pixel counts right (i.e., the same as when the image was saved) it WILL open properly.  The thing is, with the Photoshop raw format there really is no metadata in the file, meaning YOU have to put all those numbers in.  It's not a general purpose "push one button and done" kind of format - it's a specialty format, as Chris noted above.
-Noel
1) will try that out
2) I am just curious and like to try out all functions and see what it does and how it works.
3) guess I have to play arould with it a bit more to find the right settings that allow me to save and re-open the file correctly.
BTW: when writing messages here my FF browser doesnt show any cursor in the text field which makes it difficult to see where I am. Does everyone have that problem?
Just noticed: I have to click on to something in the pulldown menu and later the cursor appears. I have the same problem with facebook. Have to click somewhere else first and then go back to the text field to make the cursor appear.

Similar Messages

  • How to check the sales orders that have been created with an Rebate Agreeme

    Dear Experts,
    Do you know how to check the sales orders that have been created with an Rebate Agreements?
    Thanks!!

    Hi Hoo Laa,
    I have one way but little lengthy.
    Rebate condition always appears in the billing document.
    So 1st you extract the sales order list from Table VBAK.
    once you have the sales order list then you can put your order list in Table VBFA --> Extract the billing document list.
    Now put that list in the table VBRK.
    In VBRK you will get the "Doc. condition" --> put that doc condition in table KONV with your rebate condition type.
    It will show the result.
    Later, through VLOOKUP you can identify in which order you have given rebate to your customer.
    Already said, Little lengthy
    Regards,
    MT

  • How do I fix or open a corrupted file that has been corrupted by some sort of programmatically email

    How do I fix or open a corrupted PDF file that has been corrupted by some sort of programmatically emailing?
    Please see the following screen shot:
    http://i67.photobucket.com/albums/h292/Athono/pdfproblem_zpsbd9bdc00.png

    Well, it is a pdf file, and it once was a readable one, I suppose.
    It must have data on the hex or binary level that can be retrieved. 
    If necessary, I will have to look into the file format of a PDF file?  Is this documented?

  • How can i copy a picture that has been installed with the flash player

    how can i copy a picture that has been installed using the flash player

    You can't. You can take a screen cap of it, but the container doesn't allow access to the individual images used in a SWF or FLV.

  • HT1212 how can i restore a ipod that has been disabled with a different computer

    how can i restore a ipod touch that has been disabled with a different computer

    Restore it in Recovery Mode: http://support.apple.com/kb/HT1808

  • How can I open a project that has been created with Mercury Playback Engine GPU Acceleration software, on my trial version of Premier Pro CC?

    Hi,
    I'm working with a colleague who is using Mercury Playback Engine GPU Acceleration software on his PC version of Premier Pro CC. I am using a mac and have a trial version of Premier Pro CC. When I try to open a project file that he has sent me I get an error message-
    "Missing renderer: This project was last used with Mercury Playback Engine GPU Acceleration (CUDA), which is either not available or not certified on this system. Mercury Playback Engine Software Only will be used."
    When I click OK and locate the files I get a message saying "File format not supported".
    Can anyone tell me what to do so that we can share project files?
    Many thanks,
    Jessie

    Shouldn't really be the MPE at fault here ... what is the codec of the footage/sequence/project?
    Second, can you create a new project in PrPro, then in the media browser, import that sequence from the other project?

  • If I send someone an htm file that has been created by Firefox can they open it in Microsoft Outlook

    I created an htm file with a program and sent it to someone but it says it is Firefox htm file. The other person does not have Firefox and says they cannot open it.
    Is this correct ?

    Every browser or other program (e.g. an HTML editor or a program like MS Word) that can render HTML files should be able to open an HTML file and display its content properly.
    Your Windows OS only shows the file as a Firefox file because you have chosen Firefox as the default browser, so the .html file extension is associated with the Firefox program.

  • How do I publish a site, that has been created on iWeb recently?

    I have created site on my iWeb recently, but hasn't been published yet. I wonder what is an acceptable way to do so, cause the programm suggests MobileMe subscription. Please help me, it is of immense importance for me.

    If this is your first website you might want to consider switching to an application that is currently being supported by the developers (iWeb has been discontinued for 2 years now) and has the modern features that most come to expect in such an application.
    If you search this forum for "iweb alternative" you'll find many topics discussing alterantive apps.  The one that is most iWeb like is Everweb and has been reviewed favorable in this forum.
    Everweb has a demo version that you can use to try to duplicate what you have in iWeb before you purchase it. 
    OT

  • How do i edit a file that has been converted to word

    I have converte a pdf to a word doc. how do I get to it and how do i edit it

    Hello kairle,
    if I understand you in the right way you made a YourName.doc from a YourName.pdf file.
    Therefore you need to open and edit the contents of this file text editors such as WORD itself, Notepad, WordPad or similar.
    Hans-Günter

  • How do you find a file that has been replaced?

    I might have accidentally replaced a word file with the same name from something else, and now I can't find the original. Is the original gone for good or is there some place else that I can check? It is a school paper and I am freaking out it is due the end of this week.

    TkMcCray wrote:
    I didn't have my backup assist on when I wrote the paper. I have set it up now. But like everyone stated it is gone, so I am rewriting it now and using this as a learning lesson. Thanks for your help
    He meant, do you have a system backup via Time Machine, Carbon Copy Cloner, etc.?  That's the shortest way to restore your complete system and data when (not if) your hard drive dies.
    Have a nice day.

  • How do i wipe a phone that has been registered with another itunes account?

    I have several users who have upgraded their company phones from 4/4S to new 5/5S devices.  They used their personal iTunes account to register the phone.  Now when I try to do a restore and wipe the device of the device, it won't let me without the previous user's Apple ID.  Is there a way around this?  One of the phones I am trying to wipe, the user is no longer with the company and I don't know how to get ahold of them.  Is that phone just useless now?

    You will need the user's Apple ID and password, or you will need to get them to go into iCloud and erase the iPhone. If you can't get in touch with a user, then your only hope will be to contact Apple Support. I've read from others that with proof that your company owns the iPhone there is something they can do to help, but that's not confirmed.
    This is the problem with allowing users to set up Find My iPhone with personal Apple IDs. You should set them up with a company-controlled ID for iCloud so as to avoid this problem.
    Regards.

  • How do I open a pdf book cover file using Acrobat XI into Indesign CC?  Everytime I try, it says I am trying to open a file that has been saved wrong.

    How do I open a pdf book cover file using Acrobat XI into Indesign CC?  Everytime I try, it says I am trying to open a file that has been saved wrong.

    PDF files cannot be natively opened in InDesign. They can only be placed as graphics.

  • How to get PDF file that has been transformed into docx into my filing system so I can work on it???

    How can I get the PDF file that was transformed into a docx file into my filing system to be able to work on it and translate it as the customer requested?

    THanks for your reply.
    Well what happens is I bought the program. It gives you a button to click,
    you log in and then a box opens up asking you to select the file, I go into
    my filing system (in Windows explorer) select the file, and the program
    converts it into docx, my choice.  I can read it there and when I try to
    copy and paste it into my file where the PDF version is saved, it behaves
    like an "image", and I can't save it.... or it saves likes something you
    save on the internet, so you have to go into internet every time you want
    to see it.    I have also pressed any amount of buttons to see if it will
    give me the option to save it any other way, and have found nothing.  What
    I would need is a file in docx.format that I can edit.  People send me
    things in PDF and sometimes I can just copy it off the PDF file and save it
    in WOrd, then I can translate it for them. But sometimes the PDF file
    doesnt allow me to copy the text.  If it is in image form, I cannot work on
    it.  It means printing it, so I can copy type it into Word... and for that
    I certainly wouldnt need to buy a program.  Its just double the work and
    ends up that the job takes twice as long.!
    Sorry  if I am a bit dumb with informatics.  But I simply could not find
    any way whatever to  copy the PDF file that was transformed into Word, in a
    format that would enable me to edit it.
    Kindest regards,
    Margery
    2013/12/2 Test Screen Name <[email protected]>
        Re: How to get PDF file that has been transformed into docx into my
    filing system so I can work on it???
    created by Test Screen Name<http://forums.adobe.com/people/TestScreenName>in *Adobe
    ExportPDF* - View the full discussion<http://forums.adobe.com/message/5890871#5890871

  • How to open D7000 RAW file in elements 9

    how to open D7000 Raw file in elements 9

    Barbara B.
    Your suggestion to try another file resolved the Converter  issue.  I found that I can open any jpg or tif file in any album that appears in the
    Windows Explorer.  So the problem was not with the RAW Converter.  Instead, I found another problem.  The ENTIRE Album
    containing the file I had been trying to open  is missing from the Windows Explorer (and I cannot open the file from the Album
    showing in the Organizer --  while I'm in the Editor!).
    So -- can you give me any help with this new problem of an Album that shows in the Organizer but not the Windows Explorer?

  • How do I open raw files from my Canon 6D in Photoshop CS5.1?

    Just tried to open raw files from my Canon 6D in Photoshop CS5.1. An error message appeared: "
    Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
    Please visit the Camera Raw help documentation for additional information." Is there a simple solution?

    You cannot, nor will you ever be able to open your Canon raw files directly in CS5.1.  Your camera model requires at least ACR 7.3 which only works with CS6, or Lightroom 4.3.  There will be no further updates for CS 5.1 ever.
    Your choices are (1) to upgrade to CS6, or (2) to download the latest version of the Adobe DNG Converter, currently 7.4, and convert your Canon raw files to raw DNG files that you can then open in your CS5.1.
    You should also know that the rendering in ACR 7.4 is far superior tou the raw conversion in ACR 6.x, so you would be leaving a lot of image quality on the table if you go the (free) DNG Conversion route.

Maybe you are looking for