How to open NAT for Linksys E1000 on PS3?

question in title:
it seems as though my gameplay on my ps3 has been very THICK(lag and delay on screen), I have tried changing the MTU and some other options and I already notice the difference but i think I can maximize my lag-free gaming if I completely open up NAT on my PS3.
Does anyone have a great guide that works?
Also would changing the MTU/ Disabling UPnP and unchecking anonymous internet requests effect my Download/Upload speeds or anything else, or does it just help fix gaming lag?
Input towards topic and questions i've mentioned will be greatly appreciated,
Thanks.
Greg

disabling the WMM has something to do with the support you get from the servers and from i was told that's not needed to be enbled it should be disabled, and by the way the linksys support team explained it's better disabled instead of enabled and it wouldn't hurt to get a actual gaming router .. i went with the E3000 and i ended up having to ship it back for some defective that i didnt even cause, i would look into a actual gaming router that supports gaming like the e3000 or the e3200 , it should said for gaming consles or something like that but i will totally look into your problem personally and go from there! intil then i would try to get in contact with playstation gaming system and figure out what ps3 ports are so you can go from there - there should be a way to test the nat type (there 3 nat type's on playstation 3 ) there's nat type 3, there is nat type 2 (which is open) and there is nat type 1 and the one we want is the nat type 2 i believe, which means open nat type (meaning plug and play enabled and open ports on the router )

Similar Messages

HT1349 How to open unlock for my iphone

How to open unlock for my iphone

Are you talking about the slider to unlock your phone or you have forgotten your password to unlock it?
Or are you referring to unlocking your iPhone from a carrier?

How to open NAT in Time Capsule? (for gaming)

Hi there.
*How do I open NAT on my Time Capsule?*
I've tried to go to +Airport Utility > Time Capsule > Internet+, but there's no NAT tab (like I've seen in different solutions on the internet). I only have one tab called +Internet Connection+. In the bottom of this there's a text saying (forgive me if it's a bit off, I'm translating it to English):
"+Choose whether this Apple-unit shall share a single IP-adress with wireless clients through DHCP and NAT, distribute a selection of static IP-adresses only through DHCP or function as a bridge.+
+Sharing of connection: Off (bridge function)+"
(I think the off-option is selected by default in the dropdown, other options are: Share a public IP-adress and distribute a selection of IP-adresses)
I'm asking this because I'm playing Call of Duty: Modern Warfare 2 on Windows 7, running boot camp on my MBP. My setup is a Time Capsule and Airport Express linked together - the Time Capsule is the main station. The reason why I'm mentioning all of this is to give as much information possible in order to solve the problem.
Thanks in advance

Welcome to the discussions!
DHCP and NAT are disabled when the Time Capsule is configured as a "bridge"....Connection Sharing = Off (Bridge Mode).
If you need to enable NAT on the Time Capsule, you must set the Connection Sharing to "Share a public IP address" on the Time Capsule using AirPort Utility.

Can't get 2 XBOX 360's to open NAT on new E1000

I'm at my wits end and about to take this back. I had a Linksys WRT54GS that worked PERFECTLY with 2 360's, but even after using my old settings, using portforward.com's settings, and trying something I saw someone recommend here for someone having the same problem with an e3000, I simply cannot get both of them to open NAT. Can someone help?

I'm having the same problem also. I have both Xboxs on static IPs and I put one on port forwarding and the other on DMZ but it doesn't seem to make any differences. It's getting me frustrated because I've tried everything and it seems to work sometimes so I backup the configurations, but the next day it goes back to strict.
I use to have a WRT54G v8 and it would work flawlessly, but this new E1000 model is giving me many problems.

Need an open NAT for 3 consoles and computer

Have 2 Xbox 360's Ps3 and cant get aOpen NAT on any of them. I have done what I needed to do for the open but both xboxs read Moderate or strict Nat rating and the same for the Ps3. I need help. I am using a E1000 Linksys Router.

Well it is not recommended to play two (2) Xbox 360® units on the same network connected to the same game server since the modem will only generate a single WAN IP address. But still you can do certain settings on router to make (2) Xbox 360 working.
Here is the link which can help you in opening NAT: http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=23787&userrole=Links...

Opening NAT for Xbox 360 (HELP!)

Ok, I really need help. I am trying to open my NAT for my Xbox 360. I recently contacted Xbox Support and they gave Port numbers and told me to contact linksys to help set the numbers up on my router. When I called them, a man told me that my that my router 's warranty is done and it would cost me 30 dollars for him to tell me how to do this. Please, someone help me fix this without giving Linksys 30 dollars. I have the Port Numbers, all I need to know is how to put those numbers on my router. Please someone help!

Xbox Settings :-
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...
Leave Username blank & in Password use admin in lower case...
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box, click Save Settings once done...
2) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
3) Click on set-up and change the MTU Size to 1452 and click Save Settings...Click on the Status tab and take note of DNS1 and DNS2 Addresses...
4) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox
IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
5) Also assign the DNS Addresses on the Xbox
Use DNS1 and DNS2 Addresses you took note off of the router status tab as Primary DNS & Secondary DNS for the xbox...
6) Turn off your modem, router, and Xbox...Wait for a minute...
7) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...
IP Address: 192.168.X.[last part of ip in your device] e.g. if static ip given to the device was 192.168.X.10 get the last part and put that to the empty box.

Open Nat for WRT54GSV4

Ok i been tryin to get my NAT set to open for MW2 for abit now but cant seem to figure out what the problem is. Can anyone please help me with opening the NAT for this router for Modern Warfare 2 on the PC, not Xbox or PS3. Any help would be appreciated thanks.

Honestly ive never had to mess with my routers ports before and honestly dont know exactly how to do it right. I know where to go in the routers settings im just abit foggy on what numbers to put in where. There are 4 boxes across each line 2 for port triggering and 2 for port forwarding, then the option to enable it. Dont mean to sound like an idiot but abit more help would be greatly appreciated Thanks for the help btw greencross

2 xboxes or ps3's with open nat for the rv042? yes i can!

i signed up specifically to tell future and current rv042 users that after a year of muckin' around with this fairly advanced networking technology, i've finally discovered how to open the nat types of 2 xboxes, instead of one being open and all others being moderate or strict. i'll break it down simply, 3074 port forwarded for the one, and dmz host for the other one. i couldn't figure out for the life of me, why the dmz host wouldn't open the nat type of the 2nd xbox at first, thats when it dawned on me that xboxes aren't capable of understanding the rv042 dmz host. so i tested the dmz host on my computer and it worked, putting my computer wide open to all ports on the internet. so what i tried was internet connection sharing, plugging my xbox wired into my computer which is set as the dmz host. i was all excited, jumping up and down for joy when i had succeeded in what took me an entire year to figure out. why so happy, do you ask? i don't think all of you know just how painful it is to not be able to open the same port more than once on the same network, very, very, aggravating. if you are having the same problem and don't understand how to do what i've explained, just ask. i cannot stand the thought that there are others out there like me that haven't been able to figure this out, it just causes me more pain. i will help.

I am having the same issue. My roommate and I both have our own copies of MW3 and our own xbox 360's connected to the same router/modem. We have Verizon Fios and the modem is an Actiontec MI424WR. We have no problem playing at the same time online as long as we are not in the same match. However, when we try to play in the same match, we can never get into a match. It just keeps cycling through the "searching for matches screen. We were at one point having issues with the OPEN NAT type but that has been solved, don't have me how, it just started working after I set the router back to defaults and we haven't had issues since.
I tried the link above, but that doesn't seem to help my issue and I think you are having the same issue has me. If you figure it out, please let me know.

Opening NAT for Xbox 360

Hey all,
I live in a fraternity house, and we just got an Apple Airport Extreme (802.11a), but we are having trouble playing together on Xbox Live, specifically Call of Duty: Black Ops. I've tried following many manuals across the internet but I can't seem to get my NAT to "Open." I followed Tesserax's manual that he posted for someone a while back, but I ended up only making go from "Moderate" to "Strict." I'm using a wireless adapter for my xbox as well. If anyone can help me out it would be greatly appreciated.
Thanks!

1) It's not the only router directly connected, we have 2 others in use as well.
It will be critical to understand the current network configuration with both the AEBSn and these other routers. XBox Live relies on certain ports opened for on-line gaming. It also uses UPnP to do this automatically. Unfortunately, the Apple routers do not support UPnP. Instead they have a similar technology called NAT-PMP, but I don't believe this is recognized by the XBox.
The key is that the router, which has NAT enabled and typically is the one connected directly to the Internet service, is the one that either supports UPnP or must be configured for Port Mapping/Port Forwarding or a DMZ to allow the XBox to have an Open NAT status.
If your AEBSn is downstream of another router, then the AEBSn should be reconfigured as a bridge. This would disable its NAT service and the mapping or DMZ configuration would need to be done on that upstream router.
2) I tried Port Mapping, not DMZ cause I was unsure how to do the DMZ part.
With a DMZ, you are basically disabling the NAT firewall for a single device on your local network. In this case that would be the XBox. Apple calls a DMZ, the Default Host. Again, this would only be potentially helpful if the AEBSn was directly connected to the Internet source.

How to Open NAT Type on PS3?

How do i open NAT Type on PS3
Need help

When you run the network test on the PS3 what is shown? what NAt type?

WRT54G2V1 Need Open NAT for Destiny PS3

I currently have a Linksys WRT54G2V router. My Playstation3 has a wired connection to my router. With my current settings when I play Destiny on my PS3 I have a moderate NAT, and would like an open NAT. My ISP is Charter Communications. I do get a public IP through to my router, and have tried portforwarding. Am i missing anthing? Do i just need a better router?

Internet Service Provider and Modem Configurations
What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have?
What ISP Modem service link speeds UP and Down do you have?
Check cable between Modem and Router, swap out to be sure. Link>http://en.wikipedia.org/wiki/CAT6 is recommended.
Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=88e63d78588142e6bb68e22d7faf2046_Configuring_the_M...
If the ISP modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems: Link>http://www.practicallynetworked.com/networking/fixing_double_nat.htm and http://computer.howstuffworks.com/nat.htm If the modem can't be bridged then see if the modem has a DMZ option and input the IP address the router gets from the modem and put that into the modems DMZ.

How to open LOV for subject under subject details in Qualification form

Dear Experts,
I want to open LOV for the subjects field in the Qualification form in HRMS. Please can you guide me to the field name and and the process for it. Please also guide me how can i make it an open field if i decide to that?
waiting for your expert opininon
Edited by: MNS on Jan 3, 2012 3:49 AM
Edited by: MNS on Jan 3, 2012 3:51 AM

I don't think you can do that easily, apart from maybe a custom version of the form with a custom view of the underlying data.
The problem you have is that the data is presented on the screen via a view; within the view definition, part of the join condition for retrieving the subject meaning will rely on the presence of a matching code in hr_lookups for the code that represents the subject. So, even if you took off the lookup logic from the field (assuming it's even possible to do that), there is a high probability that the 'free format' data won't be retrieved in any query.
Clive

How to open Nat on airport extreme

Hello i just got a new airport extreme trying to connect xbox it says i need to open nat. my computer is running vista i have a ipad and iphone 5s please help

Xbox uses upnp.. think vhs..
Apple routers use NAT-PMP.. think betamax..
When xbox says please open the following ports for me.. apple router blows a rasberry at it.. and says tough.. you are not apple.. I don't have to do what you say.
Same for your vista computer.
iOS devices should be ok.
You will need to manually port forward. Good luck with that.
http://support.xbox.com/en-AU/xbox-360/networking/network-ports-used-xbox-live
Tesserax is the guru here and he often answers these queries so refer to one of his posts for more details.
AirPort Extreme and xbox 360
https://discussions.apple.com/thread/5385065?tstart=0
The latest Xbox one should just add a couple of ports but will be about the same.

Opening NAT for Modern Warfare 2 on my PC

As I'm sure many of you are doing as well I've been playing Modern Warfare 2 since the night it came out. It is telling me that I have a strict NAT on my router (WRT160n V2). I've searched on the forum and all I can find is information on opening the NAT for the xbox 360. I run mine on my PC and I'm wondering what ports I need to open, and whatever else it would take to make Call of Duty run the absolute best possible. Thanks in advance for any help.

i had this issue for a while. first i dmz'd through my dsl router to my desktop and everything came through fine. it wouldnt allow me to do this with my lap top though. i know that is not a good idea and it was just to check if it would open the nat at all. After some tinkering i had to call my isp and ask them to help me set up the modem so it would just pass all the info to the router. I know that the original poster of this thread has cable but i am posting something in here since it is a similar issue and it might be able to help some one. Once i set my router to PPoE and had the correct ports forwarded my nat opened on the laptop. i also turned the firewall on my router off and left upnp.
* UDP 1500 (outbound only, no forward needed)
* UDP 3005 (outbound only, no forward needed)
* UDP 3101 (outbound only, no forward needed)
* UDP 28960
I have dsl and a wrt160

How to open Ports for App running in VPC

Trying to open ports for a Windows app that I am running via VPC but the application still shows the port is unreachable.
So far I have, opened the port in Mac OSX Firewall, opened ports on my D-Link DSL504G router, disabled the Windows firewall (plus opened the ports in case it became enabled).
Have also redirected the ports to the IP address within VPC Windows and the Mac itself.
Have run out of ideas as nothing seems to work.
Regards
Alan

Try the following ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): <enter the appropriate UDP port values>
o Public TCP Port(s): <enter the appropriate TCP port values>
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): <enter the same as Public UDP Ports or your choice>
o Private TCP Port(s): <enter the same as Public TCP Ports or your choice>
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

How to open NAT for Linksys E1000 on PS3?

Similar Messages

Maybe you are looking for