How to open the crystal reports 2008 in CRYSTAL REPORTS ENTERPRISE 4.0

Hi All,
Can you please let me know how can migrated the crystal reports from BO XI 3.1 to SAP BO 4.1 and after migrate how to open the crystal reports 2008 in CRYSTAL REPORTS ENTERPRISE 4.0.
can you please help on this and if document please share.
Thanks,
Rajesh

Use the upgrade management tool to move from 3.1 reports to BO 4.1. After migration, open the report in crystal enterprise 4.0, you will get a message saying that the report will be converted to latest version, will not be able to view from older version after converting. (Similar words- not sure exact words).

Similar Messages

How to overcome the Memory leakage issue in crystal report 2008 SP2 setup.

I have developed the small windows based application tool with help of Visual studio 2008 for identify the memory consumption of crystal report object. It helps to load the crystal report objects in the memory and then released the object from the memory. The tool simply does the u201CLoading and Unloadingu201D the objects in the memory.
The tool will be started once u201CTest_MemoryConsumption.Exeu201D executed. The u201CTest_MemoryConsumption.Exeu201D consumes u201C9768 KBu201D memory before load the crystal report object in memory. It means, 9768 KB is normal memory consumption for run the tool.
Crystal report object initiated by the tool and object help to load the report in memory once the tool initiated the crystal report object. Now u201CTest_MemoryConsumption.Exeu201D consumes u201C34980 KBu201D memory during the crystal report object creation and report load process. The actual memory consumption of crystal report object is 34980u20139768=u201C25212u201DKBu201D.
The memory consumption u201C34980 KBu201D will be continued till the end of the process. The memory consumption will be reduced to u201C34652 KBu201D from u201C34980 KBu201D once report load process completed. It means, u201C328 KBu201D memory only released from the memory consumption. Tool enables the Release command for the crystal report object. But crystal report object does not respond to the command and will not release his memory consumption.
The memory consumption u201C34652 KBu201D will be stayed in the memory once job ends. If i again initiate the crystal report object then it crystal report object start to consume the memory from 34652 KB.
Database objects and crystal report objects are properly used in the tool. The object release commands properly communicated to crystal report setup. But the u201CCrystal report service pack 2u201D setup unable to respond the commands which has enabled from .Net Tool. Crystal report objects are properly initiated and disposed in the tool. But the crystal report unable to release from the server.
The memory consumption will be reduced once the server restarted or kill the application.
Crystal report 2008 and crystal report 2008 SP2 setup available in the server.
Microsoft .Net Framework 2.0 SP2, Microsoft .Net Framework 3.0 SP2 and Microsoft .Net Framework 3.5 SP1 are available in the server,
Could you please suggesst how to avoid the memory consumption keep increasing and how to release the memory consumption once the crystal object disposed???

Hi Don..
My case is different one. I hope, the problem with Run time Installation setup file (Crystal report 2008 Serivce Pack2 installer) which we installed in the server.
Let me explain with Live scenario which our client faced in crystal report 2008 Service pack2 Installer.
Our client is using a application to help to print their reports. The application is developed with Windows service.
Windows service keep on running in the server. Windows service executes the client 's crystal reports( Labels Report, Stock report) which designed for clients need and the reports will be printed from printer.
10 Same type report (Label Report) will be printed in 1 minute. Reports are not printing during non business hours. But the windows service keep on running. Memory cosumption of application will be 160 MB in business hours.
For Example, On Monday the application memory consumption starts with 160 MB. The Memory consumption will be reached 165 MB in peak business hours. Then the memory will be ended in163 MB in the End of Monday. It means, The memory consumption will be in 163 MB during the non business hours. Reports will not be printed in non business hours.
On Tuesday, the application memory consumption starts with 163 MB and it will be reached 168 MB during the peak hours. The Memory consumption will be ended in 165 MB in the end of Tuesday. The same process contiues till friday. End of friday, the memory consumption of the application will be ended with 170 MB.
Application Memory Consumption slowly increasing in the server. In 5 days, Memory consumption reached Threshold value (170 MB) of the server. Application gets hanged up once the memory consumption reached 170 MB. We got the error messages as "Attempted to read write protected memory " / "Not Enough memory for process". If we restart server / If we restart the service then memory consumption of application get reduced to 160 MB.
From the above scenario, We came know that the either the problem with Application object or the problem crystal report object. In the application, We have checked dispose methods of application objects completly. I am sure that application objects are properly disposed in the application. I hope the problem not with application objects. The problem with Crystal report objects.
Application properly communicates the dispose methods to crystal report objects. Crystal report objects are not released from
the memory.
Crystal report 2008 Serive Pack 2 setup installed in the server.
As you said, If Crystal report runtime is not released from memory then memory consumption keep increase??? In service oriented architecture application, how to unload the crystal report runtime??
Do you any fix for this kind of issue??
Willl Crystal report 2008 service pack 3 help on this issue??

Migration from Crystal Reports 2008 to Crystal reports Enterprise(BOE 4.0)

Dear all ,
I m currently doing a project on Crystal reports 2008 where datasource is mostly SAP BW queries. Our customer will have BOE 4.0 in coming months . I have heard that in BOE 4.0 Crystal reports for Enterprise will be a better option for BW datasources.Is that true? So here comes my question , Is it possible to migrate reports based on Crsytal reports 2008 to Crystal reports for Enterpise 4.0 afterwards. What will be best option for us , shall we build further reports on Crystal reports 2008 or Crystal reports 2011 or should wait until we have BOE 4.0 ?
Thanks
Best regards
Atul

Hi,
We are going through the migration process from 2008 to Enterprise version. The only issue we are facing is the mapping of the Hierarchy nodeid and parentid. Other than that we were able to migrate most of the pieces from the report.
Here is the overview of migration process:
1. When you run the upgrade manager to migrate objects from BOE 3.1 to 4.0 it will automatically upgrade it to CR 2011 version.
2. You then have option to migrate it manually by opening the report in Enterprise version.
3. If you open the report in Enterprise version it will prompt you to connect to common semantic layer wizard.
4. Before that you have to have your datasource ready for that report depends on how your CR 2008 is connected. (can be BEx query or Relational Universe)
5. If its BEx query you have to maintain the connection in CMC under OLAP connection to your BW system.
6. Next thing is to map the Source fields to Target fields (BEx query or Relation Universe via IDT) and your report will be converted to Enterprise version.
7. You might have to resolve if there are any errors.
Let me know if you have any particular questions if i can help.
Thanks.
Edited by: Rajan Patel on Oct 27, 2011 5:13 PM

How to write the folder path in standard webi report - Most Accessed Documents

How to write the folder path in standard webi report - Most Accessed Documents
All
   -> Public Folders
                  -> Auditor
                  -> ABCD
I want to give path of folder 'ABCD' and all the reports/ subfolders under it?
Prompt - 'Enter the Folder Path(Add % at the end to include Sub Folders)' ?
Give me exact path syntax

Hi Daniel,
But when I give my URL as
http://serverA:80/irj/portal??NavigationTarget=ROLES://portal_content/crm-practice/14-Feb/Test_Page
I am able to access the iview but the thing is I am getting TLN,Toolarea,Masthead,etc.
I will tell my requirement,
ServerA (EP 7.0) has some iviews,pages...
I need to access these iviews from serverB(EP 6.0)....
In ServerB only the iviews has to be displayed in the content area but not TLN,Toolarea,etc.
Kindly help me in this regard.
Thanks and regards,
Purushothaman.
Message was edited by: Purushothaman Vyasarao

HT4796 I have made a file using the Pages app.I mailed it to a friend.When she tried opening the same file on her pc at home , It did not open.Please help me as to how to open the file in the Microsoft word format on her pc.

I have made a file using the Pages app.I mailed it to a friend.When she tried opening the same file on her pc at home , It did not open.Please help me as to how to open the file in the Microsoft word format on her pc.

Send it as a PDF.

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why do i need to do some settings for it ?

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined settings to run the cd's and dvd's ?

A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

How to open the file types of iOSApp(ipa),EPUBFile(.epub) in windows 7(32 bit)

How to open the file types of iOSAPP(ipa),EPUBfile(.epub) in windows 7(32 bit)

iOS apps can be added to an iTunes library and thereafter transferred to an iOS device. They cannot be opened directly on a PC.
epub files can be added to an iTunes library, and thereafter transferred to an iOS device where they can be read with the iBooks application. Files protected with Apple's DRM cannot be opened directly on a PC, though there are programs such as Kindle and Calibre that will open non-protected epub files.
tt2

How to send the output to PDF format in reports 6i?

Hi,
How to send the output to PDF format in reports 6i? I given Mode = BITMAP.
DESTYPE = File, DESFORMAT = PDF, DESNAME = C:\x.pdf.
Report is running fine. But PDF file not generated. I don't know what i missed. Any one can help this?
Thanks
Kavitha

Hello,
Do you get this problem only for DESFORMAT=PDF ?
Test with :
DESFORMAT = RTF, DESNAME = C:\x.rtf
or
DESFORMAT = HTMLCSS, DESNAME = C:\x.html
does it work ?
Check if DESNAME is modified in the reports itself.
Regards

How to expand the hierarchy column automatically when delivery reports by a

Hi Experts,
In OBIEE 11.1.1.6.0,how to expand the hierarchy column automatically when delivery reports by agent?
For example:
In SampleLite RPD, when we drag "Time Hierarchy" and Sales column into the report , and sent it by agent ,it will only display "Total" sales, not show all level value,such as Year,Month,Day.So how to expand the hierarchy column automatically when delivery reports by agent?
If we expand all levels and save them, it will be ok, however, when we add new data, it will be collpased automatically and not show the lowest level data, requiring Users or Developer to modify this report for expanding the hierarchy. We think it is very trouble, is there any good suggestion or method for achieving our requirement?

958054 wrote:
Hi Dpka,
Is it any difference? I look at the result is same.
Firstly, you said it is 'Add member of ',
Now, you said it is 'Keep member of'
Could you please tell me which options I must select ? Thanks very much.Here is some notes from the documentation to make a better sense of how those two options would work:
•Selection steps — When you create selection steps, you can add a group or a calculated item in a step. Subsequent Keep Only or Remove steps might reference members that were included in the group or calculated item.
◦A group list is affected by members that are kept or removed in subsequent steps, but the group outline value remains the same. For example, suppose the MyNewYork group contains Albany and Buffalo and its value is 100. Suppose Albany is removed in a later step. The value of the MyNewYork group remains at 100, but Albany is no longer listed with the group.
◦A calculated item is not affected by members that are kept or removed in subsequent steps, because removals can affect the components of the formula.
•Groups and calculated items — A step can include a group or calculated item. Groups and calculated items can be used only with Add steps; they cannot be used in Keep Only or Remove steps.

How to open the Url type in Attachments Table

Hi All,
If we attached the any files, files are stored in the fnd_lobs table, pickup the data from the fnd lobs table and stored in the local system but if attached the url type how to open the url type.is there any standard ?
Thanks,
Venkat

You can do it one of two ways:
1. Insert some CSS that will change the target to "_new".
2. Change the field that the user enters information in to a single line of text, then create a calculated column that is:
=CONCATENATE("<a href=",[URL Field]." target=new>Click here</a>")
Format that as a number.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

How to open the Data Perspective function of Smart View in EAS?

How to open the Data Perspective function of Smart View in EAS?
I use my Smart View to connect one ASO cube, and I found the button of Data Perspective is grey. It's not available.
In Smart View Users' Guide, it says:
Note: Data perspective may not be enabled in your Smart View system. Your options for data perspective are enabled and configured by the administrator in Oracle Essbase Administration Services.
But I could not find how to configure the this option in EAS.
Does anyone know about this?

I have already turned on the varying attributes function, but the data perspective button is still grey, not available.

How to open the second VM in Oracle 11gR2 2-nodes RAC system ?

Folks,
Hello. I have been installing Oracle Database 11gR2 RAC system using 2 nodes that are 2 Virtual Machines (rac1 and rac2) on the top of VMPLayer 3.
I follow the tutorial http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html to do.
The original Virtual Machine rac1 has run correctly. I configure rac1 network (eth0 and eth1) by opening VM rac1 and using command "[root@rac1\] #neat" as root user to invoke the network configuration.
For the second Virtual Machine rac2, I simply copy all files in "C:\VM\rac1" into "C:\VM\rac2". Then I have done the following:
1) In the directory "C:\VM\rac2", rename "rac1.vmx" to "rac2.vmx".
2) Change display name from "rac1" to "rac2" in the file "rac2.vmx".
The next thing to do for rac2 is to open the Virtual Machine rac2 and configure its network (eth0 and eth1) by using the command "[root@rac2\]#neat" as root user.
But by this step, I don't understand how to open the Virtual Machine rac2 so that can configure its network (eth0 and eth1).
Can any folk tell me how to open the VM rac2 to configure its network by this step ?

Hi,
But by this step, I don't understand how to open the Virtual Machine rac2 so that can configure its network (eth0 and eth1)."rac2" is a new virtual machine after you copied and changed the display name and you need to add this in the vmware enventory (I am talking about vmware server and vmware player should have the same way as it is supposed to run multiple vritual machines on your PC). Then it will be visible it to you. Now start this new machine and edit the network configuration.
Salman

How to open the body of nokia N72

It seems that some moisture has entered my Nokia N72 since last 10 hours the screen appears grey and there is a display problem. Can any one help me by showing me how to open the body of Nokia N72 by step by step description or diagrammatically?

Sorry but it is against the rules of this forum to discuss warranty voiding procedures like disassembly, regardless of your personal warranty status.
Try one of the many unofficial forums, that you can find by searching google, for help.

How to open the iPhone 5S Unlocked

How to open the iPhone 5S Unlocked

Contact the carrier to whom it is locked, inquire about their process to unlock, and if you qualify.
If it is already unlocked or was purchased as unlocked, simply insert a SIM from a supported carrier.

How to open the block diagram of the NI ELVISmx

How to view the program block diagram of the virtual instrument of the function generator, oscilloscope and so on in the NI ELVISmx,, I have seen before, but now I forgotten how to open the block diagram, who know?
1110340036 jyh

iOS apps can be added to an iTunes library and thereafter transferred to an iOS device. They cannot be opened directly on a PC.
epub files can be added to an iTunes library, and thereafter transferred to an iOS device where they can be read with the iBooks application. Files protected with Apple's DRM cannot be opened directly on a PC, though there are programs such as Kindle and Calibre that will open non-protected epub files.
tt2

How to open the crystal reports 2008 in CRYSTAL REPORTS ENTERPRISE 4.0

Similar Messages

Maybe you are looking for