How to open the popup with in Tab navigator working area.

Hi,
I using the customized panel to open it as popup by using popup manager in the Tab navigator . The popup should be able to move with in the tab navigator's content area. Not outside of the tab navigator's content area. How to do this? .What is the difference between opening the popup by using popup manager and add children(); which one is best?
Regards,
Thiru

It depends on your purpose. A popup displays information to the user, and it might be modal if the user should repsond to the popup before continuing, but why constrain it's movement to the space occupied by the TabNavigator.
You could, in theory, check the x and y properties of the popup position, and then compare those with the x and y of the TabNavigator view area, though you might have to do some conversion between global and local coordinates.
You might want to consider your design. Is a popup necessary? Perhaps not. If so, maybe do not consider constraining its movement as you have indicated.
If this post answers your question or helps, please mark it as such.

Similar Messages

How to open the browser in a Tab

How to open the browser in a new Tab when click on the URL.
My problem is i have one DataGrid that contains
"Name,Designation,Company URL".
After running the program Name,Designation,URL are displayed
in the DataGrid .
I have Four URL's in Datagrid ,the four URL's are opening in
the different tabs when the user click on the URL.
How can i do these three things in Flex.
Thanks & Regards,
Srinivas.

Hi,
Please check the sample in the URL below.
http://raghuonflex.wordpress.com/2006/12/07/flex-i-frame/
Hope this helps.

Crystal Server 2011 "Failed to open the connection" with 32 & 64 bit drivers are loaded

Brand new installation of Crystal Reports Server 2011 with CR Developer 2011 as well. Downloaded new Postgres and MySQL drivers for both the 32 and 64 bit ODBC definitions. Created a new report on the server to eliminate any migration driver incompatibility issues. Reports run fine in Developer but give the same "Failed to open the connection."
and still problems running the reports If I Save Data with the reports, I can click View to see the data, but they will not refresh.
All the articles I'm finding online seem to point to the issue with needing 32 & 64 bit drivers, but I've loaded both and built my ODBC connections with the 32 drivers in the SysWOW64 folder.
Logged in as Administrator. Any thoughts out there? Are there some new security measures?
Thanks in advance ...

Yes, Designer and CRS are on the same machine.
Good catch with the 5.1 driver. I loaded up the mysql-connector-odbc-5.1.13-win32 driver and used that. It alone failed when I made the ODBC connection with it. I see on the CRS 2011 Feature Pack 3 .pdf file that it says "Only 64-bit database connector middleware is supported" ... I downloaded the other mysql-connector-odbc-5.1.13-winx64 64bit file, but teh .msi and .zip versions failed on the load. Do I need that if it says that or should the first one be enough?
I've been trying to use a normal User DSN, no? Apparently I don't have access as a machine Administrator to do it as I get "You are logged on with non-Administrative privileges. System DSNs could not be created or modified." Having our server guys get that straightened out and we'll see. Had not heard of that actually but will give it a go.
You say I should create the DSN entries in the 64 bit version of the ODBC Data Source Administrator ... located in the system32 folder, not the SysWOW64 folder, where the 32 bit drivers are found, yes? Isn't that the "wrong" location to use I've been reading? Or are System DSNs different from a User DSN?
BIG thanks for the replies. I owe you beers!!!!!

How to itemrender the menubar into a tab navigator?

Hi,
I have a requirement like the tab navigator/ tab bar should behave like a menu bar. How can I do this? any work around for this?
Thanks,
Raja.

You can use the java.io.* package to write to files.
API: http://java.sun.com/j2se/1.5.0/docs/api/java/io/package-summary.html
Tutorial: http://java.sun.com/docs/books/tutorial/essential/io/index.html

When I have two browser windows open, the first with multiple tabs the second a window opened from a link (so just one tab), and close the second window, I receive the Quit Firefox prompt, "do you want to save tabs...?"

This was happening with FF 3 before upgrading to 4, and was not happening with FF4.0 until the 4.0.1 update was applied, the first time it ran. Same issue on another computer running FF3, so may be a extension related problem.
If I have three windows open and close the third, I do Not get this. Only when two are opened and one is closed. I could have three, close one, then the second and get the prompt.
Not disabled extensions
Adblock Plus
BugMeNot
Cooliris
Download Statusbar
DownloadHelper
DowntThemAll!
FireGestures
HTML5 Extension for Windows Media Player
HTTPS-Everywhere
Java Console
PDF Download
Session Manager
TinEye Reverse Image Search
YouTube Comment Snob
Disabled

Does that 2nd window have a '''Close Window''' hyperlink on that page and you are using the X in the upper right corner of that 2nd window to close it?

Problem with Lightroom 5: how to connect the app with my original pictures which are on a external hard disk and, once this resolved, how to create virtual pictures

A friend has installed Lightroom 5 on my MacBook air. he transferred all my picture that were on my IPhone an on Iphoto on Lightroom but without making virtual copies systematically. He put the original (real?) pictures on a external hard disk under Data_photos folder to allow more memory space on my Mac book Air. My problem now that when I connect the external hard disk with my computer the connexion does not happen automatically. it is like if Lightromm does not recognize the path to get connected to the original/real picture and therefore I cannot see pictures with all their potential and I cannot work on these. I am stuck! What should I do to 1) create this link? 2) create then virtual copies in order to be able to work on my computer without been obliged to connect my external hard disk to be able to use the application Lightroom. The friend who helped me disappeared! He is not in Japan and unable to help me.I hope you can help me. I have been looking for support to apple stores, photo shops, computer specialists but I have not found the expert capable to help me. I am leaving in Geneva. And believe that I should have some one with me physically to resolve a problem which I believe is not a serious one if one knows lghtroom an dinformatic basics... thank in advance to come back to me asap !!!!

Follow these instructions: Adobe Lightroom - Find moved or missing files and folders

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why do i need to do some settings for it ?

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined settings to run the cd's and dvd's ?

A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

How to open a file with the extension x3f (sigma)

how to open a file with the extension x3f (sigma)?

RAW data from the following Sigma cameras is currently supported:
DP1
DP1s
DP2
SD9
SD10
SD14
If your camera is among these, then simply import the photo as usual. https://helpx.adobe.com/lightroom/help/importing-photos-lightroom-basic-workflow.html

The popup window won't open at a normal size. Any ideas on how to keep the popup window a normal size when opening?

I recently did the latest update for my MacBook Air and when I use a specific website it won't open the popup blocker at a normal size. Any ideas on how to keep the popup blocker at the size that I select?

This is a user to user forum and Adobe Staff does drop by.
First thing to try is Reset the Type Tool by right-clicking on its' icon in the Options bar.
If you still have problems, it could be related to fonts. Here is a step by step troubleshooting help doc for that.
Troubleshoot fonts | Photoshop CC 2014, CC, CS6, CS5
And basic troubleshooting: Photoshop: Basic Troubleshooting steps to fix most issues
Gene

How can I make the popup with empty fileds and create new record?

I would like to use a popup to create new record.
I created a af:popup by drag and drop a VO from data control to jsff. then, I created a button and place a af:showPopupBehavior. I was able to popup window by click the button.
however, the window filled with the information from the 1st record. and when I select a record in table and click popup, the popup is filled with that record.
How can I make the popup with empty fileds and create new record by saving the popup?
Thanks

You can have edit and new buttons, in the PopupFetchEvent identify button source (using popupFetchEvent.getLaunchSourceClientId()) if new button clicked clear the binding using below code.
If you want to see empty fields, in the popup PopupFetchEvent clear the input component bindings.
resetBindingValue("#{bindings.<componentid>.inputValue}", null);
    public static void resetBindingValue(String expression, Object newValue) {
        FacesContext ctx = FacesContext.getCurrentInstance();
        Application app = ctx.getApplication();
        ExpressionFactory elFactory = app.getExpressionFactory();
        ELContext elContext = ctx.getELContext();
        ValueExpression valueExp = elFactory.createValueExpression(elContext,expression,Object.class);
        Class bindClass = valueExp.getType(elContext);
        valueExp.setValue(elContext,newValue);
    }

Suddenly with version 9 and 10 i cant use the shortcut command of ctrl+shift+t to open the most recently closed tab.

Suddenly with version 9 and 10 i cant use the shortcut command of ctrl+shift+t to open the most recently closed tab. a feature used several times a day, previously. This is very Frustrating to me, i have tried looking up a tool keyconfig 20110522 and looked that it says that ctrl+shift+t is the right command, but i still cant use it WHY oh WHY?? if i could get some help figuring this out it would be so awesome, cause i love Firefox, been using it almost daily for the last 10 or so years and i don't intend to switch soon.

Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.] This is a temporary diagnostic session and you can exit anytime and start Firefox normally again. This session disables all the '''Extensions''', themes ('''Appearance''') and '''Plugins''' in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''.
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

Does Safari use up bandwidth if I leave it running in the background with zero tabs open? Do I have to quit the application each time I am done to avoid exceeding my internet usage/host quota?

If I leave Safari running in the background with zero tabs open, does it still use up bandwidth? Do I have to quit the application each time I am done to avoid exceeding my internet usage/host quota? I'd rather not have to since quitting the application and restarting it when I need to will quickly become tedious, but if that saves me on bandwidth usage, I'll do it. Thanks!

iStat pro is another good means of checking your Mac's activity. Set it up within Dashboard. It is a free facility.
iStat pro for Mac - CNET Download.com

How can i open the popup from java class

Hi,
Please tell me how can i open the popup from java class.
I am using jdev 11.1.1.7.0
I have used the below code which works fine in jdev 2.1 but it will have some errors in 11.1.1.7.0.
Please tell me some way to do this in all jdev versions.
Bean obj = (Bean)RequestContext.getCurrentInstance.getExternalContext.getPageFlowScope(“obj”);
Code for hide pop-up
FacesContext context = FacesContext.getCurrentInstance();
String popupId = obj.getPopUpBind().getClientId()
ExtendedRenderKitService service = Service.getRenderKitService(FacesContext.getCurrentInstance(),
ExtendedRenderKitService.class);
String hidePopup = "var popupObj=AdfPage.PAGE.findComponent('" + popupId +
"'); popupObj.hide();";
service.addScript(FacesContext.getCurrentInstance(), hidePopup);
Code to Show pop-up
StringBuffer showPopup = new StringBuffer();
showPopup.append("var hints = new Object();");
showPopup.append("var popupObj=AdfPage.PAGE.findComponent('" +
obj.getPopUpBind().getClientId() + "');popupObj.show(hints);");
service.addScript(FacesContext.getCurrentInstance(), showPopup.toString());
Code need to be added in jsff pop tag
binding="#{pageFlowScope.bean.popUpBind}
Variable need to be added in Bean.java
private RichPopup popUpBind;

Hari,
Since you're using a non-public build of JDeveloper, you should be using a non-public forum.
John

How to open the specific folder view with JS

Hi,
Maybe very simple thing, but I don´t know how to "open" the view to an excisting folder like "Macintosh HD/MyDocs/This_Folder" ?
Thanks in advance!
Erkki

I found the answer myself. It was this what was missing (to choose the specific folder).
eg.
app.browseTo(Folder("/Macintosh HD/MyFolder/"));

When I click a link to open the page in new tab, it open the new page beside my page.

After I update FireFox to version 3.6.8, I could not open the new page in the last tab, it always opens the new page in beside the tab.
Mmm…I could not make sure the new page or new tab I said is the same with you…?? (I use Chinese version so that I don’t know if it’s the same or not…)
A window could open several pages with different tabs, and I could click different tab to different page, right?
If I right clicked a link to open the page to “new tab” in the same window, the new tab opened in the last tab of my window.
But after I update FireFox to version 3.6.8 and I click a link to open the page to “new tab” in the same windoe, the new tab will open beside my page. (Mmm…Open on right of my page.)
I would like the “new tab” open to the last tab in my window, not “beside” the tab I used. How could I change the setting??)
== This happened ==
Every time Firefox opened
== After I update FireFox to 3.6.8

That feature isn't new to 3.6.8, it was changed in 3.6.
Type '''about:config''' in the URL bar and hit Enter.
''If you see the warning, you can confirm that you want to access that page.''
Filter = '''browser.tabs.insertRelatedAfterCurrent'''
Double-click that preference to change the value to '''''false'''''

How to open the popup with in Tab navigator working area.

Similar Messages

Maybe you are looking for