How to Organize the columns in the dynamic internal table?
Hello Folks!
How to Organize the columns in the dynamic internal table? i tried passing the parameter COL_POS to the fieldcatalog, Which is not working.
Organize in What order ? What is your way to output ?
If you use ALV, you need to create fresh FIELD CATALOG for your dynamic table and then assign the column position.
Regards,
Diwakar
Similar Messages
-
Logic for retreiving the values from a dynamic internal table
Hi all,
I have an issue with the logic to fetch data from a dynamic internal table into fields. let me give you guys an example the sy-tfill = 9 (subject to vary). I need to populate the fields.
Regards,
SukumarHi,
this is for printing out the info in a dynamic table,
it will work likewise to insert data.
PARAMETERS:
p_tabnam TYPE tabname DEFAULT 'DB_TABLE_NAME'.
DATA:
lv_dref TYPE REF TO data,
ls_dd03l LIKE dd03l,
lt_fieldname TYPE TABLE OF fieldname,
ls_fieldname TYPE fieldname.
FIELD-SYMBOLS:
<fs> TYPE STANDARD TABLE,
<wa_comp> TYPE fieldname,
<wa_data> TYPE ANY,
<wa_field> TYPE ANY.
REFRESH lt_fieldname.
SELECT * FROM dd03l INTO ls_dd03l
WHERE as4local = 'A'
AND as4vers = '0000'
AND tabname = p_tabnam
ORDER BY position.
ls_fieldname = ls_dd03l-fieldname.
APPEND ls_fieldname TO lt_fieldname.
ENDSELECT.
IF NOT ( lt_fieldname[] IS INITIAL ).
CREATE DATA lv_dref TYPE TABLE OF (p_tabnam).
ASSIGN lv_dref->* TO <fs>.
SELECT * FROM (p_tabnam) INTO TABLE <fs>.
WRITE:
/ 'CONTENTS OF TABLE', p_tabnam.
LOOP AT <fs> ASSIGNING <wa_data>.
SKIP.
WRITE:
/ 'LINE', sy-tabix.
ULINE.
LOOP AT lt_fieldname ASSIGNING <wa_comp>.
ASSIGN COMPONENT sy-tabix OF STRUCTURE <wa_data> TO <wa_field>.
WRITE:
/ <wa_comp>, <wa_field>.
ENDLOOP.
ENDLOOP.
ENDIF.
grtz
Koen -
To read the column names of an internal table
Hi ,
I want to read the column/field names of an internal table into another internal table.
How can this be done?
Kind Regards,
hgarsht RungtaHi ,
you can get the attributes of any internal table into another ..
check the following code ..
DATA : it_mara TYPE STANDARD TABLE OF mara WITH HEADER LINE.
DATA : it_detail TYPE abap_compdescr_tab,
wa_comp TYPE abap_compdescr.
DATA : ref_descr TYPE REF TO cl_abap_structdescr.
ref_descr ?= cl_abap_typedescr=>describe_by_data( it_mara ).
it_detail[] = ref_descr->components .
loop at it_detail into wa_comp.
write:/ wa_comp-name .
endloop.
Regards,
Rajesh Kumar -
Make the column to row.(internal table)
hi
i have an internal table ITAB
data:begin of itab
quarters(2),
end of itab.
that has contents
Q1
Q2
Q3
Q4
I would like to have a ITAB2 like this
data:begin of itab
Q1(2),
Q2(2),
Q3(2),
Q4(2)
end of itab.
Q1 Q2 Q3 Q4 Q5
any ideas guys..........
thanks
raghu.REPORT z_test.
Transpose itab1 to itab2.
TYPES: BEGIN OF ty_1,
first,
second,
third,
fourth,
END OF ty_1.
TYPES: BEGIN OF ty_2,
first,
second,
third,
END OF ty_2.
FIELD-SYMBOLS: <fs> TYPE ANY,
<fs2> TYPE ANY.
DATA: itab1 TYPE TABLE OF ty_1 WITH HEADER LINE,
itab2 TYPE TABLE OF ty_1 WITH HEADER LINE,
curr_line TYPE sy-tabix.
itab1-first = '1'.
itab1-second = '2'.
itab1-third = '3'.
itab1-fourth = '4'.
APPEND itab1.
itab1-first = '1'.
itab1-second = '2'.
itab1-third = '3'.
itab1-fourth = '4'.
APPEND itab1.
itab1-first = '1'.
itab1-second = '2'.
itab1-third = '3'.
itab1-fourth = '4'.
APPEND itab1.
LOOP AT itab1.
CLEAR itab2.
ASSIGN COMPONENT sy-tabix OF STRUCTURE itab2 TO <fs>.
curr_line = sy-tabix.
DO.
ASSIGN COMPONENT sy-index OF STRUCTURE itab1 TO <fs2>.
IF sy-subrc NE 0.
EXIT.
ENDIF.
IF curr_line = 1.
<fs> = <fs2>.
APPEND itab2.
ELSE.
READ TABLE itab2 INDEX sy-index.
<fs> = <fs2>.
MODIFY itab2 INDEX sy-index.
ENDIF.
ENDDO.
ENDLOOP.
LOOP AT itab2.
WRITE:/ itab2.
ENDLOOP.
Please find the above code for the same.
Regards
Ramesh. -
How to get the NameTab Structure(X031L) for Dynamic internal table?
when we pass standard table to the FM 'DD_GET_NAMETAB' we will get the
nametab structure(x031l), like this i want to get the same structure for
dynamic internal table . how can I achieve this
please help me...Hi,
try this method
REPORT zmaschl_create_data_dynamic .
TYPE-POOLS: slis.
DATA: it_fcat TYPE slis_t_fieldcat_alv,
is_fcat LIKE LINE OF it_fcat.
DATA: it_fieldcat TYPE lvc_t_fcat,
is_fieldcat LIKE LINE OF it_fieldcat.
DATA: new_table TYPE REF TO data.
DATA: new_line TYPE REF TO data.
FIELD-SYMBOLS: <l_table> TYPE ANY TABLE,
<l_line> TYPE ANY,
<l_field> TYPE ANY.
Build fieldcat
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE' EXPORTING i_structure_name = 'SYST' CHANGING ct_fieldcat = it_fcat[]. LOOP AT it_fcat INTO is_fcat WHERE NOT reptext_ddic IS initial. MOVE-CORRESPONDING is_fcat TO is_fieldcat. is_fieldcat-fieldname = is_fcat-fieldname. is_fieldcat-ref_field = is_fcat-fieldname. is_fieldcat-ref_table = is_fcat-ref_tabname. APPEND is_fieldcat TO it_fieldcat. ENDLOOP.
Create a new Table
CALL METHOD cl_alv_table_create=>create_dynamic_table EXPORTING it_fieldcatalog = it_fieldcat IMPORTING ep_table = new_table.
Create a new Line with the same structure of the table.
ASSIGN new_table->* TO <l_table>.CREATE DATA new_line LIKE LINE OF <l_table>.ASSIGN new_line->* TO <l_line>.
Test it...
DO 30 TIMES.
ASSIGN COMPONENT 'SUBRC' OF STRUCTURE <l_line> TO <l_field>.
<l_field> = sy-index.
INSERT <l_line> INTO TABLE <l_table>.
ENDDO.
LOOP AT <l_table> ASSIGNING <l_line>.
ASSIGN COMPONENT 'SUBRC' OF STRUCTURE <l_line> TO <l_field>.
WRITE <l_field>.
ENDLOOP. -
Column names of a dynamic internal table
Hi Friends,
I have a dynamic internal table flowing in my ABAP program and I want to list down the column names of the this dynamic internal table.
The declaration of this dynamic internal table :
FIELD-SYMBOLS:
<l_t_data> TYPE STANDARD TABLE.
Can you please tell me how to get the column names?
Thanks,
GauravHi,
You can use ABAP Runtime Type Identification to get the column names of the internal table.
e.g >
>lo_itab holds reference to description object of internal table whose column names i have to extract.
>Using method describe_by_data of class cl_abap_typedescr export the field symbol assigned to the table and import the object reference into lo_itab.
>Then using method get_table_line_type of lo_itab import line type description object reference into lo_line.
>Check if lo_line is referring to a structure, if yes , downcast it to a object reference lo_struct of type cl_abap_structdescr.
>The column description of all columns in the structure is stored in 'components' table of cl_abap_structdescr.
So loop at the table to get all the column names stored in column 'name' of table 'components'.
Thank You. -
Adding Specific columns of dynamic internal table row into another column
Hi Gurus,
I need to add few columns of a dynamic internal table row into another column:
Article description hy01 hy02 total
101 panza 10 12 22
102 masht 12 12 24
dynamic internal table is created and columns hy01 hy02.... can increase
How to add the the values in hy01 hy 02... into total.
Regards,
DepHi,
If you really want to have a dynamic table, then you will have to find a way to generate a whole new table, and then copy the data from the old table to the new one. There is no way to modify a type during runtime in ABAP.
Here an example how to generate a dynamic table based on another internal table, hope this will help you.
TYPE-POOLS: slis.
PARAMETERS: p_nb_hy TYPE i DEFAULT 2. "Number of new HY columns to be added
* Type ZST_T:
* matnr TYPE matnr
* maktx TYPE maktx
* hy01 TYPE i
* total TYPE i
TYPES: ty_t TYPE STANDARD TABLE OF zst_s.
PERFORM main.
*& Form main
* text
FORM main.
DATA: lt_fieldcat TYPE slis_t_fieldcat_alv,
lt_t TYPE ty_t,
lr_new_t TYPE REF TO data.
FIELD-SYMBOLS: <lt_new_t> TYPE STANDARD TABLE.
"Add some lines to LT_T just to have something to display on screen
DO 10 TIMES.
APPEND INITIAL LINE TO lt_t.
ENDDO.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'ZST_S'
CHANGING
ct_fieldcat = lt_fieldcat.
"Copy LT_T to LR_NEW_T
PERFORM extend_and_copy_table USING lt_t p_nb_hy CHANGING lr_new_t lt_fieldcat.
CLEAR lt_t. "Not needed anymore...
ASSIGN lr_new_t->* TO <lt_new_t>.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
it_fieldcat = lt_fieldcat
TABLES
t_outtab = <lt_new_t>.
ENDFORM. "main
*& Form extend_and_copy_table
FORM extend_and_copy_table USING ut_t TYPE STANDARD TABLE
uv_nb_hy TYPE i
CHANGING cr_t TYPE REF TO data
ct_fieldcat TYPE slis_t_fieldcat_alv
RAISING cx_sy_struct_creation cx_sy_table_creation.
DATA: lo_tabledescr TYPE REF TO cl_abap_tabledescr,
lo_structdescr TYPE REF TO cl_abap_structdescr,
lo_new_structdescr TYPE REF TO cl_abap_structdescr,
lo_new_tabledescr TYPE REF TO cl_abap_tabledescr,
lt_components TYPE cl_abap_structdescr=>component_table,
ls_component TYPE cl_abap_structdescr=>component,
lv_field_cnt TYPE numc2,
ls_fieldcat TYPE slis_fieldcat_alv,
lr_fieldcat TYPE REF TO slis_fieldcat_alv.
FIELD-SYMBOLS: <ls_old_s> TYPE ANY,
<lt_new_t> TYPE STANDARD TABLE,
<ls_new_s> TYPE ANY.
"Get the list of all components from UT_T line structure
lo_tabledescr ?= cl_abap_tabledescr=>describe_by_data( ut_t ).
lo_structdescr ?= lo_tabledescr->get_table_line_type( ).
lt_components = lo_structdescr->get_components( ).
"The new columns will be from type of column HY01
ls_component-type = lo_structdescr->get_component_type( 'HY01' ).
"The new columns will have the same fieldcat info as column HY01
READ TABLE ct_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'HY01'.
"HY<lv_field_cnt> = new field name
lv_field_cnt = uv_nb_hy + 1.
"For each new column...
DO uv_nb_hy TIMES.
"Generate the new column field name
CONCATENATE 'HY' lv_field_cnt INTO ls_component-name.
ls_fieldcat-fieldname = ls_component-name.
"Add the new field to the components of the new structure
INSERT ls_component INTO lt_components INDEX 4.
"Add the new field's fieldcat info to the fieldcat
INSERT ls_fieldcat INTO ct_fieldcat INDEX 4.
lv_field_cnt = lv_field_cnt - 1.
ENDDO.
"Adjust the COL_POS from fieldcat
LOOP AT ct_fieldcat REFERENCE INTO lr_fieldcat.
lr_fieldcat->col_pos = sy-tabix.
ENDLOOP.
"Create the new table
lo_new_structdescr = cl_abap_structdescr=>create( p_components = lt_components ).
lo_new_tabledescr = cl_abap_tabledescr=>create( p_line_type = lo_new_structdescr ).
CREATE DATA cr_t TYPE HANDLE lo_new_tabledescr.
ASSIGN cr_t->* TO <lt_new_t>.
"Copy all data from old to new table
LOOP AT ut_t ASSIGNING <ls_old_s>.
APPEND INITIAL LINE TO <lt_new_t> ASSIGNING <ls_new_s>.
MOVE-CORRESPONDING <ls_old_s> TO <ls_new_s>.
ENDLOOP.
ENDFORM. "main -
Dynamic internal table- column to row conversion
Hello all,
Inside a program i generate a dynamic internal table and
This table has one single column. But I need to convert the rows as columns.
Eg:
dynamic internal table ITAB has content
Forbes
Times
Reuters
Warner
stern
I would like to have a ITAB2 like this
Forbes Times Reuters Warner Stern
Please note this is a Dynamic internal table!!!!
I need some approach for my problem. Thanks a lot in advance.
Karthik.Hi karthik,
1.
For this purpose,
in my program,
<b> there is an INDEPENDENT FORM</b>
whose inputs are
<b> LIST OF FIELDS, (just as u require)</b>
and from those, it consructs dynamic table.
2. Here is the program.
the dynamic table name will be
<DYNTABLE>.
3. U can use this program (FORM in this program)
to generate any kind of internal table
by specifying list of fields.
4.
REPORT abc.
COMPULSORY
FIELD-SYMBOLS: <dyntable> TYPE ANY TABLE.
FIELD-SYMBOLS: <dynline> TYPE ANY.
DATA: lt TYPE lvc_t_fcat.
DATA: ls TYPE lvc_s_fcat.
FIELD-SYMBOLS: <fld> TYPE ANY.
DATA : fldname(50) TYPE c.
DATA : ddfields LIKE ddfield OCCURS 0 WITH HEADER LINE.
START-OF-SELECTION.
field list
ddfields-fieldname = 'BUKRS'.
APPEND DDFIELDS.
ddfields-fieldname = 'MATNR'.
APPEND DDFIELDS.
PERFORM mydyntable .
see <DYNTABLE> in debug mode.
BREAK-POINT.
INDEPENDENT FORM
FORM mydyntable .
Create Dyn Table From FC
FIELD-SYMBOLS: <fs_data> TYPE REF TO data.
FIELD-SYMBOLS: <fs_1>.
FIELD-SYMBOLS: <fs_2> TYPE ANY TABLE.
DATA: lt_data TYPE REF TO data.
data : lt TYPE lvc_t_fcat .
CONSTRUCT FIELD LIST
LOOP AT ddfields.
ls-fieldname = ddfields-fieldname.
APPEND ls TO lt.
ENDLOOP.
ASSIGN lt_data TO <fs_data>.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = lt
IMPORTING
ep_table = <fs_data>
EXCEPTIONS
generate_subpool_dir_full = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
Assign Dyn Table To Field Sumbol
ASSIGN <fs_data>->* TO <fs_1>.
ASSIGN <fs_1> TO <fs_2>.
ASSIGN <fs_1> TO <dyntable>.
ENDFORM. "MYDYNTABLE
regards,
amit m. -
How to Copy data from field symbol to Dynamic Internal Table
Hi,
I want to copy the data between two dynamic Internal tables . Following is the code were I have data in the field symbol wanted to transfer it to the other Internal table :
REPORT ztest.
DATA:
gd_dref TYPE REF TO data,
gd_dref1 TYPE REF TO data.
FIELD-SYMBOLS: <fs1> TYPE any,
<fs_wa> TYPE any,
<field> TYPE any,
<fs_wa1> TYPE ANY TABLE. * Contains data from p_src
*Copy data from p_src to p_dest*
PARAMETERS: p_src LIKE dd02l-tabname . * Name of Dynamic Internal table *
p_dest LIKE dd02l-tabname . * Name of Dynamic Internal table*
*DATA : lt_csks LIKE p_dest WITH HEADER LINE.
START-OF-SELECTION.
CREATE DATA gd_dref TYPE (p_src).
CREATE DATA gd_dref1 TYPE TABLE OF (p_src).
ASSIGN gd_dref->* TO <fs_wa>.
ASSIGN gd_dref1->* TO <fs_wa1>.
SELECT * FROM (p_src) INTO TABLE <fs_wa1>.
*Write out data from FIELD SYMBOLS TO Table.
loop at <fs_wa1> into <fs_wa>.
do.
assign component sy-index
of structure <fs_wa> to <field>.
if sy-subrc <> 0.
exit.
endif.
if sy-index = 1.
write:/ <field>.
else.
write: / <field>.
endif.
enddo.
endloop.
*Need Logic To Copy the Data to p_dest table from <fs_wa1>.
*p_dest is a table having a similar structure to table p_src .
*Need Logic To Copy the Data to p_dest table from <fs_wa1>.
EXIT.
Thanks in Advance.try this...
I have extended your source code and just used vbak/vbap as an example as they have some common fields like vbeln/erdat etc which corresponds with your requirement of 'similar structure' i.e. shared/common fields in both.
Cheers...
report ztest.
data:
gd_dref type ref to data,
gd_dref1 type ref to data,
gd_dref_str type ref to data,
gd_dref_tab type ref to data.
field-symbols:
<fs1> type any,
<fs_wa> type any,
<fs1_dest_str> type any,
<fs_dest_tab> type any table,
<field> type any,
<fs_wa1> type any table.
* contains data from p_src
*Copy data from p_src to p_dest*
parameters: p_src like dd02l-tabname default 'vbak',
* name of dynamic internal table *
p_dest like dd02l-tabname default 'vbap'.
* name of dynamic internal table*
*data : lt_csks like p_dest with header line.
start-of-selection.
create data gd_dref type (p_src).
create data gd_dref1 type table of (p_src).
assign gd_dref->* to <fs_wa>.
assign gd_dref1->* to <fs_wa1>.
select * from (p_src) into corresponding fields of table <fs_wa1>
up to 3 rows
where vbeln ne space.
create data gd_dref_str type (p_dest).
create data gd_dref_tab type standard table of (p_dest).
assign gd_dref_str->* to <fs1_dest_str>.
assign gd_dref_tab->* to <fs_dest_tab>.
*write out data from field symbols to table.
loop at <fs_wa1> into <fs_wa>.
" break-point here - can see vbeln/waers/create date/ etc move over to new structure
" the 'common' fields of your structures - the same will happen. if they not the same name you will have to do an
" explicit move i.e. if fieldname = xyz ....move fieldxyz to new field123....after the move-corre
break-point.
move-corresponding <fs_wa> to <fs1_dest_str>.
insert <fs1_dest_str> into table <fs_dest_tab>.
** do.
** assign component sy-index
** of structure <fs_wa> to <field>.
** if sy-subrc <> 0.
** exit.
** endif.
** if sy-index = 1.
** write:/ <field>.
** else.
** write: / <field>.
** endif.
** enddo.
endloop.
" write out some dest data from the dest table build from previous loop
loop at <fs_dest_tab> assigning <fs1_dest_str>.
do.
assign component sy-index of structure <fs_wa> to <field>.
if sy-subrc <> 0.
exit.
endif.
if sy-index = 1.
write:/ <field>.
else.
write: / <field>.
endif.
enddo.
endloop. -
Dynamic internal table from SELECT - statement ?
Hi, is it possible to define an internal table just after a select statement is executed so that this internal table holds all the data that come back from the statement ?
thanks in advance,Check the link -
Re: Create Dynamic internal table
Regards,
Amit -
Dynamic internal table operations
Hi,
I have an issue with dynamic internal table wherein I need to write a select statement with For All Entries on dynamic internal table and populating the record into another dynamic internal table.
I am trying with the code below but its not working.
SELECT (FLD)
FROM (T_TABLE)
INTO CORRESPONDING FIELDS OF TABLE <DYN1_TABL>
FOR ALL ENTRIES IN <DYN_TABL>
WHERE KEY_FNAME = <DYN_TABL>-KEY_FNAME.
FLD is the dynamic field.
T_TABLE is the dynamic database table.
DYN1_TABL is the dynamic internal table
DYN_TABL is the dynamic internal table
KEY_FNAME is the dynamic key field of T_TABLE.
Pls help me on this issue.
Response with code snippets will be appreciated.
Thanks in advance.Thanks for your reply Nikki but my issue is to reference a field in dynamic internal table to be used with 'For All Entries' satement.
like for static we use
For All Entries in Itab where <fieldname> = itab-<fieldname>
I was looking for the same statement for dynamic tables -
Dynamic internal table structure
pl. give the solution to create dynamically internal table structure with respective of different table.
Hi and welcome to the SDN,
this topic is more related to abap, but anyway:
data: l_tabname(30) type c value 'MARA',
ref_data type ref to data.
field-symbols: <fs_tab> type table.
create data ref_data type standard table of (l_tabname).
assign ref_data->* to <fs_tab>.
Now <fs_tab> is a internal table with structure of table mara.
Hope this helps!
regards
Siggi -
How to create New columns for the Internal Table Dynamically?
HI Guys,
In my logic i have to create new columns depending on the logic which i am executing.
My requirement is .I have to display o/p like this
Material || Year || Period || Mix ratio || Vendor ||Mix Ratio || Vendor || Mix Ratio Vendor || Mix ratio || Vendor || Mix ratio.............................from table's CKMLMV003 and CKMLMV001.Her i have to display the o/p in the above format and i have to display Vendor and Mix Ratio for 5 columns irrespective of data .If i have more than 5 columns for any record then i have to create a New columns dynamically for Vendor and Mix ratio.If anybody want my code i can Submit But plz tell with example how to do?
<b>The O/P must be finally shown in ALV Grid</b>
Thanks,
GopiYou must create the entire internal table dynamically, you can not add columns to a statically define internal table. Here is an example of creating a dynamic internal table.
Creation of internal table dynamically based on the Date Range entered
Regards,
Rich Heilman -
How to delete a column from the table control in module pool?
Hi,
can any one please tell How to delete a column from the table control in module pool?
thanks in advance
warm regards
HareeshKumar Nhi hareesh,
I think it is better to hide it.
How to hide: You can check this link
Dynamic Hide column in table control -
Add column in the dynamic internal table
Hi Experts,
I have a dynamic internal table. I need add new column in the internal table and I don´t Know.
My code:
DATA: it_generic TYPE REF TO Data,
wa_generic TYPE REF TO data.
FIELD-SYMBOLS: <table> TYPE ANY TABLE,
<wa> TYPE ANY,
<field> TYPE ANY.
CREATE DATA it_generic TYPE STANDARD TABLE OF (wa_datoscarga-ZTBLCAR).
CREATE DATA wa_generic TYPE (wa_datoscarga-ZTBLCAR).
ASSIGN it_generic->* TO <table>.
CHECK <table> IS ASSIGNED.
ASSIGN wa_generic->* TO <wa>.
CHECK <wa> IS ASSIGNED.
SELECT *
INTO CORRESPONDING FIELDS OF TABLE <table>
FROM (wa_datoscarga-ZTBLCAR)
WHERE bukrs EQ p_bukrs AND
z_petic EQ z_peticion AND
ZIDFASE eq 'E'.
After this I need add one column selection at the first position of the columns.
ThanksHi,
Please refer to the below link for the code snippet on how to create a dynamic internal table -
[Create a dynamic internal table.|http://www.divulgesap.com/blog.php?p=MjE=]
Cheers,
Ravi
Maybe you are looking for
-
I can't print a monthly calendar--I get a preview but no way to print it.
There is no print option in the previw box that you et when you hit print on the calendar page. I tried sending the preview image to myself but it prints small.
-
How to tell the actual nic speed in Windows 8?
I really !..... hate many things about Windows 8 but the nic speed has to be one of my most despised "features". I used to go to monitor my nic in task manager and BOOM it told you that you had a gigabit connection and you might be using 10% of y
-
HT5902 How do you force "my photo stream" on a pc to update with an iPad or iPhone?
How does one force photostream on a pc to update with an iPad or iPhone photostream? All devices are on the same wifi network.
-
FF differs from other browsers - keystroke is swallowed when creating input element
Hi all I have found a workaround for this problem, so its importance is low, but I will be interested in any comments. I am creating a control in javascript which represents an editable grid - a bit like a spreadsheet. The cells consist of 'span' ele
-
Web service available in SAP Solution Manager
Hi, Which are the Webservices available in SAP Solution Manager. I want to Integrate HP Openview change request process with SAP Solution Manager ChaRM. Regards PK Edited by: PK on Aug 9, 2010 3:37 PM