How to output sample and convert clocks to PFI lines of E-Series DAQ (DAQPad-6015)

Hi,
Can someone tell me how to output sample and convert clocks to PFI lines of E-Series DAQ (DAQPad-6015)?
Thank you very much.
Jack

John --
Windows is not an option for me. I like your idea of using a counter output -- it may be helpful as I am getting ramped up, but my application will eventually require both timer outputs.
I have a legacy C application written for Macintosh, and I am in the process of moving it onto OS X. So my options are to use DAQmx Base, or write an in-kernel driver. I actually have already done the latter for 6024/6025 E-series boards (for another company); for this client I was hoping to use the DAQmx Base to allow an easy transition to M-series boards, without the cost of writing and supporting a low-level driver.
The specific task I am doing is relatively straightforward. I record 2 channels of AI for a short period (usually about 250 ms.) and during this time I drive 2 external digital signals. Right now, I use the 2 timer outputs, which allows precise synchronization with the output and AI sampling.
I appreciate your comments, and thanks in advance for any additional suggestions you can lob my way.
--spg
Scott Gillespie
Applied Brain, Inc.
scott gillespie
applied brain, inc.

Similar Messages

How to output data when converting labview vi into matlab mex functions

Hi,
I am a fairly new user to labview and am currently working on labview
7.1. I have created a labview vi which can extract data from ni daq
6070e in real time. The problem is that this code has to be converted
so that it can be used with matlab.in order to do that i am using math
interactive tool kit which converts the labview code into mex files
which can then be used in matlab. Unfortunately i have not been able to
figure out how to output this data so that it can be processed in
matlab easily. i cannot afford any loss of information and all the
output must happen in real time. the o/p must take place after the fft
has been done. i am attaching the vi for convenience.There are 10
broken wires ,and this is the place where i want the o/p to be
generated.
Also do let me know if this vi can be further improved.
Regards
Attachments:
RT_loop2ver4_working.zip ‏642 KB

Manuj,
You seem to have misunderstood the way in which LabVIEW processes data. The code that you have produced will run in exactly the same way without the need for the case structure.
The code does not actually run the data from the previous case. It is merely processing data from the previous loop iteration, regardless of the case. If you were to remove the case structure, leaving only one copy of the code intact, and remove the toggle switch you have produced, or used the shift register which, I assure you would have worked, then you will have exactly the same functionality.
I have attached an example that uses the shift register to toggle cases, but also iterates that the case structure is not needed by using the same feedback node (and code) without a toggle switch or case structure.
Hope this helps you optimize your code
Regards
AdamB
Applications Engineer
National Instruments UK
Applications Engineering Team Leader | National Instruments | UK & Ireland
Attachments:
CASE_NO-CASE_Example.vi ‏24 KB

ITunes no longer recognizes midi files how can I play and convert them?

iTunes 10.3 recognised midi files, I could "move" them to the iTunes library and select them. then click on "Advanced" and "Convert to AAC" (or to MP3 etc).
iTunes 10.5 will not recognise midi files.
I think an older version of GarageBand could also read and convert midi files, but this no longer appears to be the case either in the latest version.
How can I now convet midi files? Has Apple decided to simply ignore them?

Thanks to Limnos, I now have some further things to try, but in the meantime I found I had been maligning GarageBand 11. Indeed its built-in Help system doesn't seem to mention Midi files at all, but I found out how to insert them from Apple's on-line support system at http://support.apple.com/kb/PH2009 and it works superbly well - one can even change the instruments on individual channels etc and then save the lot as an AAC (m4a) or mp3 etc file.
I also loaded up an old version of iTunes, version 10.3, which still recognises Midi files and can convert them to AAC or mp3 but in so doing some volume seems to be lost.
But the winner so far for me has been Audacity, free software. One needs to add a LAME encoder for mp3 output, I installed Soundflower and routed the playback of the midi file available in the Finder (in fact for the whole machine, while playing the midi file) and declared Soundflower as the input for Audacity. I could then use Audacity's effects menu to increase the volume throughout the track and save it. I then, using the Sound preferences of the machine, switched back to the inbuilt speakers and was able to listen to a higher volume version, playable in iTunes 10.5. More faithful to the original midi file than the GarageBand version.
See instructions at http://ask.brothersoft.com/tags/convert-midi-to-mp3/ and in particular one of the links http://ask.brothersoft.com/how-to-convert-a-midi-to-a-mp3-using-audacity-26125.h tml
This is for Windows but for Mac it's very similar/ - still Audacity. BUT the instructions in the last link don't seem to quite work, which is why I had to use Soundflower. I can import the midi file, I can select it, but then the export item on the file menu remains greyed out and unuseable, so I must presumably be missing some plug-in. Also Audacity keeps telling me it can't find various ffmpeg files even though I thought I had installed them correctly. I'm obviously missing something here, but at least I can now get my midi files into aac or mp3 format again at last.
For Soundflower see http://cycling74.com/soundflower-landing-page/ and http://kineme.net/forum/General/soundflowerforlion
and there is a useful tutorial by Nowjobless on YouTube at
http://www.youtube.com/watch?v=r3FGOIW08gA&feature=related
Good luck to anyone else facing the same problems, it remains to be seen how to "convert" midi files to mp3 in Audacity without recourse to Soundflower.

How do I save and convert Email docs to PDF?

I Just purchased a new IPad Air. I downloaded adobe redder. I received an email formatted in wind at but, I am unable to open and convert to PDF.. Can someone help?

You've misunderstood the way Adobe Reader works. If you have a PDF file in your email, you can use Reader to view it. Reader doesn't convert your email into a PDF.

How to rip cds, and convert them to play on 3g iPhone

Thanks to all the great advice and knowledge on here, I was able to make my own ringtones for the phone. But alas, I have been unable to rip a cd, and convert it to play on my iPhone. Any help for newbie would be great. PS, gotta make momma happy, or taint' no one happy. LOL

To create an iTunes playlist, at the iTunes menu bar go to File and select New Playlist. Or at the bottom of the iTunes source list is a + button. Selecting the + button will add a new Playlist.
Enter a name for the Playlist.
Select Music under Library in the iTunes source list to view all music available in your iTunes library. Select and drag the music that you want in the Playlist to the Playlist and then release. This does not copy the music. This creates a pointer to the music in your iTunes library only. To delete a song from the Playlist, select the song followed by delete. Deleting a song from a Playlist does not delete the song from your iTunes library. You can have the same song in multiple playlists.
With the iPhone connected to iTunes, under the Music tab for your iPhone sync preferences select Sync Music and below select selected playlists. All iTunes playlists are available in the window below. Select the Playlist or Playlists that you want transferred to your iPhone followed by a sync.
To add additional music to your iPhone, add the music to the Playlist or Playlist in iTunes that you have selected to be transferred to your iPhone followed by a sync. To remove a song from your iPhone, delete the song from the Playlist that you have selected to be transferred to your iPhone followed by a sync.

How to plot Actual and Target on the same line chart in webi

Hi,
We have a requirement where we need to plot a graph on webi. The data is something like:-
Month     Regional Office     Actual      Target
12014     Midwest               768          876
22014     Eastern               1908          1876
Can anyone please suggest something.
Regards
Shirley

Hi Shirley Ray,
May i know the exact requirement...
IF you want to show the data in graph,its just simple
you can show regional office and month on x axis,measure on y axis like below chart.
right click on table and convert it into column chart.
Regards,
Samatha B

How to identify Parked and Posted Documents in GL Line Item Report

Is there any way to identify parked and posted documents in GL Line Item Report S_ALR_87012282? If i tick the parked documents in the further selection tab in the selection parameter, report will list all documents (parked and posted).
There is no available field in the layout. Is there any other way?
Thanks!

HI,
The other way to know the parked document details
use tcode: FBV3 - Display
OR
you can go to SE16 and enter table name VBKPF -Document Header for Document Parking
BSTAT = V
V = parked document
and ececute u will get the details of parked document.
Edited by: Manohar Mathkunti on Sep 13, 2008 11:11 AM

How to create a block diagram in Labview to measure the output voltage and convert to centimeters (Height measurement)?

Hello. My name is Alex here.
I am now facing a difficulty in creating a Labview diagram whereby the voltage that been created needed to be converted into centimeters.
I have been researching in the internet but to no avail. I need help in creating the diagram. Im using NI DAQ USB-6009 for the sensor and already wrote down the measurement.
Please help me. Thank you

You can use the attached VI as a sub-VI in your existing program.
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.
Attachments:
Volts to Centimeters [LV 85].vi ‏13 KB

How to find download and convert pdf format function module for a script

Hi,
I have script requirement its already fixed with nace tcode and when we run output type in tcode va02 its generatinga mail with attaching script ouput in pdf format. Now i want find how that script generating pdf format and attaching to mail there in driver program no any function modules using for that.
So anyone can help me for this finding.
Thanks.

Dear Pradeep,
Use FM: CONVERT_OTF, this FM converts PDF output. After use the FM: SX_TABLE_LINE_WIDTH_CHANGE FOR convert line width 255.
Regards,
Abbas.

Fax the output type and convert to PDF and then to save in UNIX Directory

Hi,
I wan to Fax the my sales order acknowldement and at the same time I want to convert that output into PDF and save in the UNIX Directory .
I also need the code for faxing the sales order acknowledgement.
Thanks in Advance
Moderator message: please search for available information/documentation before asking, also see Brad's remarks below.
Edited by: Thomas Zloch on Dec 20, 2010 9:51 PM

These are standard processes which are covered in the help files and have been discussed many times here. This is NOT a training forum for newbies where experts just give you the solution for your requirement. Once you have proven that you've actually made an effort to solve the issue yourself and have a SPECIFIC technical question, you'll get some help...

How can I view and convert .264 files from my security cameras for use on my Mac and the web?

My security cams record in a .264 file format HD. I want to view, edit, etc on my Mac, what software will do that and are there any easy tips to do this? I'm new to Mac's so I'm not sure what is the best format to convert to? mp4? Suggestions?
Thanks in advance. I do love the Mac so far.

I have downloaded the trail....and it won't recognize my .264 files....not sure what the deal is? Here is a screen shot-they files are "grayed" out....and won't highlight. Do you see anything wrong? I'm pulling the files off of a Lorex DVR security system. LHD200

How to Rip DVD and Convert Video for Your iPad On ...

Aiseesoft iPad Converter Suite is newly released software for iPad fans. It can rip any DVD files (DVD-Video, DVD folder and DVD IFO file) to iPad, convert all popular videos/audios to iPad formats and transfer files from PC to iPad, from iPad to PC and from iPad to iPad. It works similar to iTunes. So why do you always buy movies and songs from iTunes with extra money? It can help you make use of your resources.
The product is very easy in use. You just need download, install and run the trial version.
The product is multifunctional. It can trim, crop, edit video effect, merge, add text and image watermark, select audio track and subtitle, adjust video settings and snapshot.
If you are Mac user, you can choose Aiseesoft iPad Converter Suite for Mac.

To create an iTunes playlist, at the iTunes menu bar go to File and select New Playlist. Or at the bottom of the iTunes source list is a + button. Selecting the + button will add a new Playlist.
Enter a name for the Playlist.
Select Music under Library in the iTunes source list to view all music available in your iTunes library. Select and drag the music that you want in the Playlist to the Playlist and then release. This does not copy the music. This creates a pointer to the music in your iTunes library only. To delete a song from the Playlist, select the song followed by delete. Deleting a song from a Playlist does not delete the song from your iTunes library. You can have the same song in multiple playlists.
With the iPhone connected to iTunes, under the Music tab for your iPhone sync preferences select Sync Music and below select selected playlists. All iTunes playlists are available in the window below. Select the Playlist or Playlists that you want transferred to your iPhone followed by a sync.
To add additional music to your iPhone, add the music to the Playlist or Playlist in iTunes that you have selected to be transferred to your iPhone followed by a sync. To remove a song from your iPhone, delete the song from the Playlist that you have selected to be transferred to your iPhone followed by a sync.

How do i import and convert movies from my Sony DCR-SR40?

is there a qay to do this?

Googling, "DCR-SR40 and Mac" I came up with this link (one of many):
http://forums.cnet.com/7723-7594_102-231072/handycam-dcr-sr40-and-mac-pro-is-the re-any-hope/
You can google too.

How to import files and convert folder structure to collections hierarchy?

My RAW files are organised on disc by date, e.g.
2013
01
02
etc
2014
01
02
etc
2015
01
2015-01-05 Family outing
2015-01-27 Walk along the Canal
etc
02
2015-02-01 Visiting granny
2015-02-05 Golf
2015-02-07 Skating competition
etc
I would like to batch import these into Lightroom (Lightroom CC) and have the folder structure above replicated in Collection Sets and Collections (i.e. one collection set for each year, and within each one have a collection set per month, and within that individual collections for the folders)
Is there a way to make this happen automatically?
Many thanks,
/alan

Hi.
Trash the iPhoto Library folder that you created on your Mac, or rename it "iPhoto Library damaged" if you may need some of its contents. Copy the iPhoto Library folder from the backup into your Pictures folder. Hold down the Option key as you launch iPhoto and select "Choose Library" from the dialog. Navigate to the good iPhoto Library folder and open. iPhoto should launch and open your library in exactly the same condition it was in when the backup was made. If all goes well you don't have to import anything.
If the library is still missing items, you can try a database rebuild. Hold Command and Option while you launch, select the first 3 options in the dialog, and rebuild. This can fix a library with a slightly damaged database.
If the library still isn't working you may have to create a new library (Option-Launch, select "Create") and import your Originals folder from the backup library. This will give you the pictures back without creating duplicates, but your albums and other items will not be recovered.
Regards.

How to compile forms and reports in linux command line ?

Hi,
I'm working on a migration from forms 6i to 11g R2. The development/migration is being made on a Windows 7 64 bits, however, those forms and reports will run on a Linux RHEL 5. Thus, I have to compile them inside that linux box.
How can I do it? Is there a tool to compile the forms and reports in command line withn a linux box?
Thanks a lot.

Thanks for the answer, Carlos.
I run the command but this error message is displayed "FRM-91500: Unable to start/complete the build".
Edited by: _blackjack on Dec 18, 2012 5:18 AM

How to output sample and convert clocks to PFI lines of E-Series DAQ (DAQPad-60​15)

Similar Messages

Maybe you are looking for

How to output sample and convert clocks to PFI lines of E-Series DAQ (DAQPad-6015)