How to package the runtime into APK with Flash Pro + AIR 3 SDK?

Hi
I'm very glad to update my AIR SDK from 2.7 to 3.0 and everything seems working well. But how can I package runtime into .apk file with Flash Pro?
Should I change the XXXXX-app.xml manually?
Thanks

Thanks, that explains a lot.
I'm afraid I'm a bit confused about what the preferred way of developing extensions is going ahead. There seems to be a lot of conflicting documentation on the adobe site, e.g. http://www.adobe.com/devnet/creativesuite.html seems like the top page for extension documentation but it only talks about CS SDK 2.0 which uses CSXS and doesn't seem to be compatible with creative cloud apps.
Then there's CS Extension Builder 2.1 which looks like it supports Flash Pro CC but isn't mentioned in the pages you linked too and it doesn't mention JSFL, but talks about the CSAW library.
Do you know if:
* The CS SDK has been dropped completely?
* CS Extenstion Builder is deprecated? (I can't see it as an option in the list of Creative Cloud apps)
* Is then any documentation/utilities to help migrate existing CSXS extensions to work with creative cloud apps?
Thanks,
Stephen

Similar Messages

How to add the google swiffy extension to Flash Pro CS6 or CC

I have downloaded the google swiffy extention however after adding it to flash pro inthe extension manager it has a check box saying (enabled) but it doesnt show under window>extensions in the Flash pro app. Are there any guides on how to do this or somehting im missing? I've heard Flash CC could support html extensions so I installed Flash CS6 but that doesn't let me add the extension either. Any support with this is would be very nice.

Thanks I see the export feature however I just have one last issue with it, when I try to export a simple swf that contains a simgle tween I get this error http://puu.sh/6DRYl.png. What can I do about that?
Edit- this only happens with Flash Pro CC not the CS6 version.

How long is the start up time with macbook pro retina?

I just bought a new 13 inch macbook pro with retina display. It is using osx mavericks.
It takes about 21 seconds to start up. I watched a demo on youtube and the demo showed it should take about 12 seconds to start up.
I have two users on the computer and each user requires a password. Would that take it longer to start up? The demo had one user and it didn't require a password.
I also briefly had sophos antivirus installed but uninstalled it. I don't know if this could have slowed it down, but it is off the computer now. I also have the firewall turned on...could this slow it?
Thanks for any input!

AppleCare will only replace your battery if it has significantly lower than expected capacity within one year of buying. After a year it's not covered.
Your battery's capacity very much depends on how you treat the battery. If it's always in a hot environment and if you're always draining the battery to 0% charge (two things that decrease Lithium-Ion battery life), then the capacity that you have is not too surprising.
You could try calling AppleCare but I don't know that you'll get anywhere with them considering that it's been more than a year.
-Eric

Macbook: How do I uninstall a game on the macbook? I need to reinstall the game for it to work, but I can't figure out how to uninstall the game to begin with.

I need to reinstall the game for it to work, but I can't figure out how to uninstall the game to begin with. I know that in Windows, there is an "Uninstall" option, but I have found no such option on the Macbook.

This is one OS X's few weak spots. For most software, it is sufficient to drag the application out of the Applications folder and into the trash. Of course, this does not delete its preference files, etc, but these are usually pretty small, and can either be left in place or deleted separately.
Some software might ship with a separate uninstaller utility that you can run. Sometimes, the package installer can also perform uninstalling, too.
You can buy general purpose uninstaller utilities, but as far as I know they won't work for software already installed; only for software installed once the uninstaller is in place.
Perhaps the safest option is to contact the company that made the game and ask them how it should be uninstalled.
Bob

I am having an issue with my adobe acrobat 9 pro. Every time I try to open a pdf from someone it opens it up with my free adobe reader rather than the Acrobat 9 pro so then I don't have all of the functions of 9 pro. How do I get it to open with 9 pro ins

I am having an issue with my adobe acrobat 9 pro. Every time I try to open a pdf from someone it opens it up with my free adobe reader rather than the Acrobat 9 pro so then I don't have all of the functions of 9 pro. How do I get it to open with 9 pro instead of the free reader?

It may depend on the plugin that is loaded into your browser. However, right click on a PDF and select the Open With option and go to the default button to select Acrobat as the default. That might do it.

How to configure the runtime and consolidation for a track in CMS.

How to configure the runtime and consolidation for a track in CMS.
I can see the track exists in CMS but the same doesnt pull up in the NWDS in the development configuration perspective.
I compared the given track with the one which gets pulled up in NWDS. Theres something called runtime system and consolidation which isnt defined for the track which is invisible.
Please advise , what are these required for. And how can we configure the same.

The runtime systems are defined for a track to setup the Transport path for any code changes....the Consolidation system is usually defined as a Virtual system for the track and used for comparison and fixing any broken or Dirty DC's ....that means it's not used as a Runtime System for Deployment as compared to DEV,QAT and PROD used for Deployment...
Hope it helps..
Regards,
Shikhil

How to divide the iview into frames?

Hi Experts,
Please tell me how to divide the iview into frames.Kindly provide the steps.Its urgent.
Regards,
Nutan

Hi Nutan,
Now its clear!!
If I understand right. You want an overview page full of links to go to your different pages?
Or maybe you want a link form each page to go to another page?
In Portal Navigation through hyperlinks is possible.
You can either do that using EPCM.doNavigate("ROLES://...") {check for EPCM API of help.spa.com}
Or you could do that by simple
<a href="http://www.sdn.sap.com/irj/portal/myql">CLICK</a>
{check for Quicklinks on help.sap.com}
Either way you'll have to make a small JSP for that.
Hope this helped
If so kindly reward with points
Prem

How to display the icons of apk files in windows explorer

How to display the icons of apk files(android apps) in windows explorer by default in windows 7 and windows 8.1 ?

Believe it or not; The answer is found by searching the internet. One solution is to install an application called BlueStacks player which appears to install an Android VM for playing Android apps. I'm sure there are other solutions, but the
BlueStacks player looks exactly like mu Moto G screen. The apps icons are displayed in Windows Explorer with BlueStacks installed.
http://www.bluestacks.com/app-player.html
I searched the internet for open apk file on pc
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

I have just installed Illustrator CS6 yesterday, but I found it was in French. Could help me figure out how to change the language into English?

I have just installed Illustrator CS6 yesterday, but I found it was in French. Could help me figure out how to change the language into English?
I got my series number from my Institut (which is in Paris, FR). I do not use Creative Cloud.
When I was installing the software, I cannot select a language.
Could you help me with my problem? Do I have to get a different series number?

lunc,
You will have to get a new application in English, to replace the French one.
You, or your Institute will have to get help from Adobe, I am afraid.
You may try a chat here,
Get help with orders, refunds, and exchanges (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-b.html
or (have your Institute) talk to Adobe in France
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html
If you fail to get any help, please report back here, and I will ask a special forum staff friend to try to find the right one at Adobe to have things sorted out.

How to maintain the data into database table

Hi,
experts,
how to maintain the data into database table

There are several ways to maintain data in the database
1. Use table maintanance generator . You can create this using SE11 and data can be edited through SM30.
2. Loginto SE11 with the specified table and check the ATTRIBUTES tab. There you can set some parameters for maintaining the database. When you set Maintain database, you edit the data thorugh SE11 it self
3. Through Se16 as well.
4. A small abap program can do the above task as well.
Thanks,
Raj
Edited by: Rajanya Kolavennu on Feb 5, 2008 8:33 PM

How to write the data into EEPROM using Labview?

How to write the data into EEPROM using Labview?

You would need some sort of EEPROM programmer. Typically might
communicate with it via serial. I don't know how you would do this in
LV. You would need to have the command protocol for the programming
device to start with.
Doug De Clue
gpibssx wrote in message news:<[email protected]>...
> How to write the data into EEPROM using Labview?

How to pull the data into smartform after designing layout?

how to pull the data into smartform after designing layout?

call the smartform in your Driver program and pass your output internal tables in the smartforms paramaters
Check the below Sample code.
FORM label_print.
DATA : g_fm_name TYPE rs38l_fnam,
         g_output TYPE ssfcompop,
         g_control TYPE ssfctrlop,
         g_form TYPE tdsfname VALUE 'ZPRINT_LABELS',
         g_dest TYPE rspopname,
         g_printer TYPE rspoptype..
REFRESH : i_out[],i_qals[].
SELECT matnr maktx
         INTO TABLE i_out
         FROM makt
         FOR ALL ENTRIES IN i_mseg
         WHERE matnr = i_mseg-matnr
         AND   spras = sy-langu.
SELECT prueflos objnr ersteldat erstelzeit matnr revlv charg mengeneinh
         INTO TABLE i_qals
         FROM qals
         FOR ALL ENTRIES IN i_mseg
         WHERE matnr = i_mseg-matnr
         AND   charg = i_mseg-charg.
*FM to accept the device type and returns the short name of the output device
CALL FUNCTION 'EFG_GET_PRINTER'
    EXPORTING
      x_no_dialog = ' '
      x_obligatory = 'X'
    IMPORTING
      y_tddest     = g_dest
    EXCEPTIONS
      cancelled    = 1
      failed       = 2
      OTHERS       = 3.
*device type name for the output device
SELECT SINGLE patype                                  "#EC CI_NOFIELD
         FROM tsp03d
         INTO g_printer
         WHERE padest = g_dest.
*printer setting
g_control-no_dialog = 'X'.
g_output-tdarmod = '1'.
g_output-tdcopies = '001'.
g_output-tddest = g_dest.
g_output-tdprinter = g_printer.
g_output-tdnewid = 'X'.
g_output-tdimmed = 'X'.
CLEAR wa_mseg.
LOOP AT i_mseg INTO wa_mseg.
    READ TABLE i_out INTO wa_out WITH KEY matnr = wa_mseg-matnr.
check for the status and filter the records
    CLEAR : wa_qals.
    LOOP AT i_qals INTO wa_qals WHERE matnr = wa_mseg-matnr
                                AND charg = wa_mseg-charg.
      CALL FUNCTION 'STATUS_TEXT_EDIT'
        EXPORTING
          objnr            = wa_qals-objnr
          spras            = sy-langu
        IMPORTING
          line             = l_status
        EXCEPTIONS
          object_not_found = 1
          OTHERS           = 2.
      IF l_status CS 'LTCA' OR l_status CS 'SKIP'.
        DELETE i_qals.
      ENDIF.
    ENDLOOP.
    SORT i_qals BY ersteldat DESCENDING erstelzeit DESCENDING.
    IF i_qals IS INITIAL.
      l_msg = text-002.
    ELSE.
      READ TABLE i_qals INTO wa_qals INDEX 1.
      SELECT prueflos vbewertung
             INTO TABLE i_qave
             FROM qave
             WHERE prueflos = wa_qals-prueflos
             AND   kzart = 'L'.
      IF sy-subrc <> 0.
        l_msg1 = text-003.
      ENDIF.
      SORT i_qave.
      CLEAR : wa_qave.
      IF NOT i_qave IS INITIAL.
        READ TABLE i_qave INTO wa_qave INDEX 1.
        IF wa_qave-vbewertung = 'A'.
          l_msg = text-002.
        ELSEIF wa_qave-vbewertung = 'R'.
          l_msg1 = text-003.
        ELSE.
          l_msg1 = text-003.
        ENDIF.
      ENDIF.
    ENDIF.
    CLEAR : wa_ser03.
    READ TABLE i_ser03 INTO wa_ser03 WITH KEY mblnr = wa_mseg-mblnr.
*Calling Smartform
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
        formname           = g_form
      IMPORTING
        fm_name            = g_fm_name
      EXCEPTIONS
        no_form            = 1
        no_function_module = 2
        OTHERS             = 3.
    LOOP AT i_objk INTO wa_objk WHERE obknr = wa_ser03-obknr.
*Calling FM generated from the smartform
      DATA : l_date(10) TYPE c,
             l_date1(10) TYPE c,
             l_date2(10) TYPE c,
             l_date3(10) TYPE c,
             l_hyphen(1) TYPE c VALUE '-'.
      CLEAR : l_date,l_date1,l_date2,l_date3.
      l_date1 = wa_mseg-vfdat+0(4).
      l_date2 = wa_mseg-vfdat+4(2).
      l_date3 = wa_mseg-vfdat+6(2).
      CONCATENATE l_date1 l_hyphen l_date2 l_hyphen l_date3 INTO l_date.
      CALL FUNCTION g_fm_name
        EXPORTING
          control_parameters = g_control
          output_options     = g_output
          user_settings      = ' '
          g_matnr            = wa_mseg-matnr
          g_mat_text         = wa_out-maktx
          g_batch            = wa_mseg-charg
          g_rev              = wa_qals-revlv
          g_edate            = l_date
          g_lot              = wa_qals-prueflos
          g_qty              = wa_mseg-erfmg
          g_uom              = wa_mseg-erfme
          g_serial           = wa_objk-sernr
          g_smsg             = l_msg
          g_fmsg             = l_msg1
        EXCEPTIONS
          formatting_error   = 1
          internal_error     = 2
          send_error         = 3
          user_canceled      = 4
          OTHERS             = 5.
      CLEAR g_output-tdnewid.
    ENDLOOP.
    IF sy-subrc <> 0.
      CLEAR : l_date,l_date1,l_date2,l_date3.
      l_date1 = wa_mseg-vfdat+0(4).
      l_date2 = wa_mseg-vfdat+4(2).
      l_date3 = wa_mseg-vfdat+6(2).
      CONCATENATE l_date1 l_hyphen l_date2 l_hyphen l_date3 INTO l_date.
      CALL FUNCTION g_fm_name
        EXPORTING
          control_parameters = g_control
          output_options     = g_output
          user_settings      = ' '
          g_matnr            = wa_mseg-matnr
          g_mat_text         = wa_out-maktx
          g_batch            = wa_mseg-charg
          g_rev              = wa_qals-revlv
          g_edate            = l_date
          g_lot              = wa_qals-prueflos
          g_qty              = wa_mseg-erfmg
          g_uom              = wa_mseg-erfme
          g_serial           = wa_objk-sernr
          g_smsg             = l_msg
          g_fmsg             = l_msg1
        EXCEPTIONS
          formatting_error   = 1
          internal_error     = 2
          send_error         = 3
          user_canceled      = 4
          OTHERS             = 5.
      CLEAR g_output-tdnewid.
    ENDIF.
ENDLOOP.
IF sy-subrc = 0.
    MESSAGE i000(zm).
ENDIF.
ENDFORM.                    " label_print

How to write the resultset into a text file

how to write the resultset into a text file

You can use the java.io.* package to write to files.
API: http://java.sun.com/j2se/1.5.0/docs/api/java/io/package-summary.html
Tutorial: http://java.sun.com/docs/books/tutorial/essential/io/index.html

HT201269 How to change the email address associated with an iPhone account?

How to change the email address associated with an iPhone account? I inherited my son's phone and it still shows his phone number even though I can add my own email account. My iCloud is also associated with his phone number.

If you mean you want to change the iCloud ID your phone is signed into on your phone (which looks like an email address), you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.
If you don't know the password for your old ID, or if it isn't accepted, and your old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

How to use the same OC4j server with different port number

How to use the same OC4j server with different port numbers..?
I have to OC4J installed on my machine on different hard disk drives....
I want to be able to run both the server simultaneously..?
is it possible ..it yes then how..?
for that i have changed the port number of one server...
but when i am trying to start the other server with different port number..it says that JVM -Bind already...
Is there any clues...?
Nilesh G

In the config directory:
default-web-site.xml: Change the port the HTTP listener listens on
jms.xml: Change the port the JMS service listens on
rmi.xml: Change the port the ORMI listener listens on.
Or, you can add another web-site.xml file, and deploy your applications to 1 server, and bind the web applications to the different web sites. This way you only have to deploy your applications to 1 place.
Rob
Oracle

How to package the runtime into APK with Flash Pro + AIR 3 SDK?

Similar Messages

Maybe you are looking for